China National Standards

China End Industry Standards English PDF List

  •  China "End" Industry Standards English PDF List:
    • Standard  Code Standard Title Standard Class Order
    YY 0862-2011 Ophthalmic optics. Ocular Endotamponades
    眼科光学 眼内填充物    		 China Medicine & Medical Device Standards
    End
    English PDF
    YY 0847-2011 Medical Endoscopes - Endotherapy device - Stone retrieval forceps
    医用内窥镜 内窥镜器械 取石网篮    		 China Medicine & Medical Device Standards
    End
    English PDF
    YY 0843-2011 Medical Endoscopes - Endoscope supply units - Insufflators
    医用内窥镜 内窥镜功能供给装置 气腹机    		 China Medicine & Medical Device Standards
    End
    English PDF
    YY 0834-2011 Medical electrical equipment. Part 2-35:Particular requirements for the safety of blankets, pads and mattesses, intEnded for heating in medical use
    医用电气设备 第二部分：医用电热毯、电热垫和电热床垫 安全专用要求    		 China Medicine & Medical Device Standards
    End
    English PDF
    YY 0672.2-2011 Endoscopy instruments. Part 2: Laparoscopy scissors
    内镜器械 第2部分：腹腔镜用剪    		 China Medicine & Medical Device Standards
    End
    English PDF
    JGJ/T 279-2012 Technical specification for strengthening building structures with external prestressing tEndons
    建筑结构体外预应力加固技术规程    		 China Building & Construction Standards
    End
    English PDF
    QC/T 892-2011 Open End blind rivets with break pull mandrel and protruding head for plastic parts
    塑料件用开口型平圆头抽芯铆钉    		 China Automobile & Vehicle industry Standards
    End
    English PDF
    QC/T 890-2011 Plastic expansion nut with open End. Type D
    d型通孔式嵌装塑料螺母    		 China Automobile & Vehicle industry Standards
    End
    English PDF
    QC/T 879-2011 Plastic expansion nut with open End. Type E
    e型通孔式嵌装塑料螺母    		 China Automobile & Vehicle industry Standards
    End
    English PDF
    QC/T 871-2011 Double End studs. bm=2d
    双头螺柱 bm=2d    		 China Automobile & Vehicle industry Standards
    End
    English PDF
    QC/T 870-2011 Double End studs. bm=1.25d
    双头螺柱 bm=1.25d    		 China Automobile & Vehicle industry Standards
    End
    English PDF
    QC/T 854-2011 Bolt with double End
    轴肩式双头螺柱    		 China Automobile & Vehicle industry Standards
    End
    English PDF
    QC/T 616-2011 Plastic expansion nut with open End. Type C
    c型通孔式嵌装塑料螺母    		 China Automobile & Vehicle industry Standards
    End
    English PDF
    QC/T 615-2011 Plastic expansion nut with open End. Type B
    b型通孔式嵌装塑料螺母    		 China Automobile & Vehicle industry Standards
    End
    English PDF
    FZ/T 93075-2011 Nonwoven thermo-calEnder
    非织造布热轧机    		 China Textile & Garment industry Standards
    End
    English PDF
    FZ/T 33013-2011 Hemp/cotton blEnded grey fabrics
    大麻棉混纺本色布    		 China Textile & Garment industry Standards
    End
    English PDF
    FZ/T 32013-2011 Hemp/cotton blEnded grey yarn
    大麻棉混纺本色纱    		 China Textile & Garment industry Standards
    End
    English PDF
    FZ/T 14007-2011 Printed and dyed cotton/polyester blEnded fabrics
    棉涤混纺印染布    		 China Textile & Garment industry Standards
    End
    English PDF
    FZ/T 10013.3-2011 Corrected method for breaking strength of pure and blEnded products of cotton, chemical fibres to temperature and regain. Corrected method for breakingstrength of printed and dyed fabrics
    温度与回潮率对棉及化纤纯纺、混纺制品断裂强力的修正方法 印染布断裂强力的修正方法    		 China Textile & Garment industry Standards
    End
    English PDF
    FZ/T 24015-2011 Wool silk blEnded worsted fabircs
    精梳丝毛织品    		 China Textile & Garment industry Standards
    End
    English PDF
    HG/T 4229-2011 Polyurethane chain extEnder HER
    聚氨酯扩链剂her    		 China Chemical Industry Standards
    End
    English PDF
    HG/T 4228-2011 Polyurethane chain extEnder HQEE
    聚氨酯扩链剂hqee    		 China Chemical Industry Standards
    End
    English PDF
    HG/T 4283-2011 Plastic Welding specimen bEnding detection method
    塑料焊接试样 弯曲检测方法    		 China Chemical Industry Standards
    End
    English PDF
    HG/T 4230-2011 Polyurethane chain extEnder MCDEA
    聚氨酯扩链剂mcdea    		 China Chemical Industry Standards
    End
    English PDF
    JC/T 2044-2011 Exit-End tractor used in wall material industry
    墙材工业用出口拉引机    		 China Building Materials Standards
    End
    English PDF
    YD/T 2386-2011 Data networks and open system communications security. Security architecture for systems providing End-to-end communications
    数据网络与开放系统通信安全 端到端通信系统安全架构    		 China Telecommunication Standards
    End
    English PDF
    JJF 1320-2011 Calibration Specification for Instrumented Charpy PEndulum Impact Testing Machines
    仪器化夏比摆锤冲击试验机校准规范    		 China Metrological Standards
    End
    English PDF
    JJF 1315.2-2011 Program of Pattern Evaluation for Fatigue Testing Machines. Part 2: Rotating Pure BEnding Fatigue Testing Machines
    疲劳试验机型式评价大纲 第二部分：旋转纯弯曲疲劳试验机    		 China Metrological Standards
    End
    English PDF
    SN/T 0684-2011 Determination of oxfEndazole,fenbendazole,febantel and oxfendazole sulphone residues in meat and meat products for export. HPLC-MS/MS method
    出口肉及肉制品中奥芬哒唑、芬苯哒唑、苯硫胍及奥芬哒唑砜残留量检测方法 液相色谱-质谱/质谱法    		 China Import Export Inspection Standards
    End
    English PDF
    SN/T 0162-2011 Determination of thiophanate-methyl,thiophanate,carbEndazim,benomyl and thiabendazole residues in fruits for export. HPLC method
    出口水果中甲基硫菌灵、硫菌灵、多菌灵、苯菌灵、噻菌灵残留量的检测方法 高效液相色谱法    		 China Import Export Inspection Standards
    End
    English PDF
    SY/T 5846-2011 RecommEnded practice for casing patch process
    套管补贴工艺作法    		 China Oil & Gas Industry Standards
    End
    English PDF
    JJF 1300-2011 Program of Pattern Evaluation of PEndulum Impact Testing Machines
    摆锤式冲击试验机型式评价大纲    		 China Metrological Standards
    End
    English PDF
    NB/T 20050-2011 RecommEnded practice for the protection of electric equipment in nuclear power plants from water hazards
    核电厂电气设备水危害防护实用方法    		 China Energy industry Standards
    End
    English PDF
    QB/T 4206-2011 Drive Ends for hand-and machine-operated screwdriver bits and connecting parts
    螺钉旋具头传动端和连接件    		 China Light Industry Standards
    End
    English PDF
    JJG 943-2011 Verification Regulation of Total SuspEnded Particulates Sampler
    总悬浮颗粒物采样器    		 China Metrological Standards
    End
    English PDF
    SN/T 0607-2011 Determination of thiabEndazole residues in meat and meat products for export. LC-MS/MS
    出口肉及肉制品中噻苯哒唑残留量检测方法 液相色谱-质谱/质谱法    		 China Import Export Inspection Standards
    End
    English PDF
    FZ/T 12006-2011 Combed cotton/polyester blEnded grey yarns
    精梳棉涤混纺本色纱线    		 China Textile & Garment industry Standards
    End
    English PDF
    FZ/T 12005-2011 Carded polyester/cotton blEnded grey yarn
    普梳涤与棉混纺本色纱线    		 China Textile & Garment industry Standards
    End
    English PDF
    FZ/T 10013.2-2011 Corrected method for breaking strength of pure and blEnded products of cotten, chemical fibres to temperature and regain. Corrected method for breaking strength of grey fabrics
    温度与回潮率对棉及化纤纯纺、混纺制品断裂强力的修正方法 本色布断裂强力的修正方法    		 China Textile & Garment industry Standards
    End
    English PDF
    FZ/T 10013.1-2011 Corrected method for breaking strength of pure and blEnded products of cotton, chemical fibres to temperature and regain. Corrected method for breaking strength of grey yarns, dyed and finished yarns
    温度与回潮率对棉及化纤纯纺、混纺制品断裂强力的修正方法 本色纱线及染色加工线断裂强力的修正方法    		 China Textile & Garment industry Standards
    End
    English PDF
    YD/T 2201-2011 Test method for TD-SCDMA digital cellular mobile communication network supporting extEnded bands
    td-scdma数字蜂窝移动通信网 支持多频段特性的无线接入子系统设备测试方法    		 China Telecommunication Standards
    End
    English PDF
    YD/T 2200-2011 Technical requirements and test method for 2GHz TD-SCDMA/WCDMA digital cellular mobile telecommunication network circuit switched video surveillance front-End unit
    2ghz td-scdma/wcdma数字蜂窝移动通信网 电路域视频监控前端设备技术要求和测试方法    		 China Telecommunication Standards
    End
    English PDF
    SN/T 2841-2011 Determination for the content of modacrylic fiber blEnded with other fibres in import and export textiles
    进出口纺织品中改性腈纶与其他纤维混纺产品纤维含量的测定    		 China Import Export Inspection Standards
    End
    English PDF
    SN/T 0935-2011 Rules for the inspection of mechanical pEndulum clock for import and export
    进出口机械摆钟检验规程    		 China Import Export Inspection Standards
    End
    English PDF
    FZ/T 93070-2010 Rotor type open-End spinning machine. Bearing of opening roller
    转杯纺纱机 分梳辊轴承    		 China Textile & Garment industry Standards
    End
    English PDF
    FZ/T 93069-2010 Rotor type open-End spinning machine. Bearing of rotor
    转杯纺纱机 转杯轴承    		 China Textile & Garment industry Standards
    End
    English PDF
    FZ/T 93054-2010 Rotor type open-End spinning machine. Opening roller
    转杯纺纱机 分梳辊    		 China Textile & Garment industry Standards
    End
    English PDF
    FZ/T 93053-2010 Rotor type open-End spinning machine. Rotor
    转杯纺纱机 转杯    		 China Textile & Garment industry Standards
    End
    English PDF
    FZ/T 93015-2010 Rotor type open-End spinning machine
    转杯纺纱机    		 China Textile & Garment industry Standards
    End
    English PDF
    SY/T 6228-2010 RecommEnd practice for occupational safety for oil and gas well drilling and servicing operations
    油气井钻井及修井作业职业安全的推荐作法    		 China Oil & Gas Industry Standards
    End
    English PDF
    NB/SH/T 0853-2010 Standard practice for condition monitoring of used lubricants by trEnd analysis using fourier transform infrared (FT-IR) spectrometry
    在用润滑油状态监测法 傅里叶变换红外（ft-ir）光谱趋势分析法    		 China Energy industry Standards
    End
    English PDF
    DL/T 737-2010 The operated management standard of unattEnd-substation for the rural electric power network
    农村无人值班变电站运行规定    		 China Electricity & Power Standards
    End
    English PDF
    DL/T 5083-2010 Specification of prestressing tEndon construction for hydropower and water resources project
    水电水利工程预应力锚索施工规范    		 China Electricity & Power Standards
    End
    English PDF
    DL/T 327-2010 Step motor type pEndulum telecoordinometer
    步进式垂线坐标仪    		 China Electricity & Power Standards
    End
    English PDF
    YD/T 2172-2010 Framework technical specification for IP network on Endpoint admission control
    ip网络端点准入控制框架技术要求    		 China Telecommunication Standards
    End
    English PDF
    SJ/T 11425-2010 Receiver indepEndent exchange format
    卫星定位接收机数据自主交换格式    		 China Electronics Standards
    End
    English PDF
    YY/T 0814-2010 Standard test method for evaluating trans-vinylene yield in irradiated ultra-high-molecular-weight polyethylene fabricated forms intEnded for surgical implants by infrared spectroscopy
    红外光谱法评价外科植入物用辐射后超高分子量聚乙烯制品中反式亚乙烯基含量的标准测试方法    		 China Medicine & Medical Device Standards
    End
    English PDF
    YY/T 0810.1-2010 Implants for surgery. Total knee joint prostheses. Part 1: Determination of Endurance properties of knee tibial trays
    外科植入物 全膝关节假体 第1部分：胫骨托疲劳性能的测定    		 China Medicine & Medical Device Standards
    End
    English PDF
    YY/T 0809.8-2010 Implants for surgery. Partial and total hip joint prostheses. Part 8: Endurance performance of stemmed femoral components with application of torsion
    外科植入物 部分和全髋关节假体 第8部分：有扭矩作用的带柄股骨部件疲劳性能    		 China Medicine & Medical Device Standards
    End
    English PDF
    YY/T 0809.6-2010 Implants for surgery. Partial and total hip joint prostheses. Part 6: Determination of Endurance properties of head and neck region of stemmed femoral components
    外科植入物 部分和全髋关节假体 第6部分：带柄股骨部件头部和颈部疲劳性能的测定    		 China Medicine & Medical Device Standards
    End
    English PDF
    YY/T 0809.4-2010 Implants for surgery. Partial and total hip joint prostheses. Part 4: Determination of Endurance properties of stemmed femoral components
    外科植入物 部分和全髋关节假体 第4部分：带柄股骨部件疲劳性能的测定    		 China Medicine & Medical Device Standards
    End
    English PDF
    YY 0792.2-2010 Ophthalmic instruments. Endoilluminators. Part 2: Fundamental requirements and test methods for optical radiation safety
    眼科仪器 眼内照明器 第2部分：光辐射安全的基本要求和试验方法    		 China Medicine & Medical Device Standards
    End
    English PDF
    SN/T 2683-2010 Identification of Eurytoma amygdali Enderlein and Eurytoma schreineri Schreiner
    扁桃仁蜂和李仁蜂检疫鉴定方法    		 China Import Export Inspection Standards
    End
    English PDF
    LS/T 3705-2010 Technical requirements and test method for quick moisture content tester of waterlogged suspEnd
    水浸悬浮法水分快速测定仪技术条件与试验方法    		 China Food industry Standards
    End
    English PDF
    LS/T 6103-2010 Inspection of grain and oils. Determination of moisture content of grain. Waterlogged suspEnd method
    粮油检验 粮食水分测定 水浸悬浮法    		 China Food industry Standards
    End
    English PDF
    SY/T 6796-2010 Norms and legEnds of drawing for oil and gas field development
    油气田开发图例及编图规范    		 China Oil & Gas Industry Standards
    End
    English PDF
    SY/T 6795-2010 Steel skeleton reinforced thermoplastic resin coiled composite pipes and End fittings for petroleum and natural gas industries
    石油天然气工业用钢骨架增强热塑性树脂复合连续管及接头    		 China Oil & Gas Industry Standards
    End
    English PDF
    SY/T 6776-2010 RecommEnded practice for design and hazards analysis for offshore production facilities
    海上生产设施设计和危险性分析推荐作法    		 China Oil & Gas Industry Standards
    End
    English PDF
    SY/T 5643-2010 RecommEnded practice for the care and handling of sucker rods
    抽油杆维护和使用推荐作法    		 China Oil & Gas Industry Standards
    End
    English PDF
    FZ/T 32012-2010 Open-End spinning flax cotton blended grey yarns
    气流纺亚麻棉混纺纱线    		 China Textile & Garment industry Standards
    End
    English PDF
    FZ/T 32007-2010 Open-End spinning ramie cotton blended grey yarn
    气流纺苎麻棉混纺本色纱    		 China Textile & Garment industry Standards
    End
    English PDF
    FZ/T 32003-2010 Polyester/flax blEnded grey yarn
    涤麻（亚麻）纱    		 China Textile & Garment industry Standards
    End
    English PDF
    SN/T 2605-2010 Identification of Pythium splEndens Braun
    油棕猝倒病菌检疫鉴定方法    		 China Import Export Inspection Standards
    End
    English PDF
    SN/T 2602-2010 Detection and identification of Agrobacterium tume faciens (Smith et townsEnd 1907) Conn 1942
    根癌土壤杆菌的检测鉴定方法    		 China Import Export Inspection Standards
    End
    English PDF
    SN/T 2599-2010 Detection and identification of DEndroctonus valens LeConte
    红脂大小蠹检疫鉴定方法    		 China Import Export Inspection Standards
    End
    English PDF
    SN/T 2549-2010 Rules for inspection of materials intEnded to contact with food. Supplementary materials
    食品接触材料检验规程 辅助材料类    		 China Import Export Inspection Standards
    End
    English PDF
    SN/T 2581-2010 Determination of flubEndiamide residues in food for import and export. LC-MS/MS
    进出口食品中氟虫酰胺残留量的测定 液相色谱-质谱/质谱法    		 China Import Export Inspection Standards
    End
    English PDF
    SY/T 6340-2010 RecommEnded practice on static electricity
    防静电推荐作法    		 China Oil & Gas Industry Standards
    End
    English PDF
    NB/T 20028.4-2010 The batteries used in nuclear power plants. Part 4: RecommEnded practice for maintenance, testing and replancement
    核电厂用蓄电池 第4部分：维护、试验和更换方法    		 China Energy industry Standards
    End
    English PDF
    NB/T 20028.2-2010 The batteries used in nuclear power plants. Part 2: RecommEnded practice for installation design and installation
    核电厂用蓄电池 第2部分：安装设计和安装准则    		 China Energy industry Standards
    End
    English PDF
    NB/T 20028.1-2010 The batteries used in nuclear power plants. Part 1: RecommEnded practice for sizing
    核电厂用蓄电池 第1部分：容量确定    		 China Energy industry Standards
    End
    English PDF
    DL/T 698.35-2010 Data acquisition and management system for electrical energy. Part 3-5: Technical specification of electrical energy data acquisition terminal. Special requirement for meter rEnding terminal of LV customers
    电能信息采集与管理系统 第3-5部分：电能信息采集终端技术规范低压集中抄表终端特殊要求    		 China Electricity & Power Standards
    End
    English PDF
    DL/T 385-2010 Determination of electrostatic charging tEndency of transformer oil
    变压器油带电倾向性检测方法    		 China Electricity & Power Standards
    End
    English PDF
    JR/T 0025.9-2010 China financial integrated circuit card specifications. Part 9: Electronic purse extEnded application guide
    中国金融集成电路（ic）卡规范 第9部分：电子钱包扩展应用指南    		 China Finance Standards
    End
    English PDF
    JGJ 85-2010 Technical specification for application of anchorage, grip and coupler for prestressing tEndons
    预应力筋用锚具、夹具和连接器应用技术规程    		 China Building & Construction Standards
    End
    English PDF
    FZ/T 12022-2009 Polyester and viscose blEnded colour yarns
    涤纶与粘纤混纺色纺纱线    		 China Textile & Garment industry Standards
    End
    English PDF
    JJG(YC)22-2010 (The amount of cigarette Ends tribe wire tester test procedures)
    		China Metrological Standards
    End
    English PDF
    JJG 22-2010 The cigarette End tribal silk Determination instrument VRof
    		China Metrological Standards
    End
    English PDF
    SY/T 6394-2009 Operation procedures for dry-blEnding and air converying of oil well cement and additives (materials)
    油井水泥与外加剂（外掺料）干混作业与气力输送规程    		 China Oil & Gas Industry Standards
    End
    English PDF
    SY/T 6302-2009 RecommEnded practices for evaluating short term proppant pack conductivity
    压裂支撑剂充填层短期导流能力评价推荐方法    		 China Oil & Gas Industry Standards
    End
    English PDF
    SY/T 6121-2009 RecommEnded methods of packer releasing and fishing
    封隔器解卡打捞工艺作法    		 China Oil & Gas Industry Standards
    End
    English PDF
    YY/T 0521-2009 Dentistry. Implants. Dynamic fatigue test for Endosseous dental implants
    牙科学 骨内牙种植体动态疲劳试验    		 China Medicine & Medical Device Standards
    End
    English PDF
    YY 0763-2009 Medical Endoscopes - Fibre optical cables for lighting
    医用内窥镜 照明用光缆    		 China Medicine & Medical Device Standards
    End
    English PDF
    YY 0068.4-2009 Medical Endoscopes. Rigid endoscopes. Part4:Fundamental requirement
    医用内窥镜 硬性内窥镜 第4部分：基本要求    		 China Medicine & Medical Device Standards
    End
    English PDF
    AQ 1078-2009 General specifications for transmission system of low concentration coal mine gas blEnding with water mist
    煤矿低浓度瓦斯与细水雾混合安全输送装置技术规范    		 China Safety & Security Standards
    End
    English PDF
    YD/T 2039-2009 Authentication mechanism of End-to-end data communication for application in mobile network
    移动通信网 应用服务端到端通信 认证机制    		 China Telecommunication Standards
    End
    English PDF
    YD/T 2038-2009 Key management of End-to-end data communication for application in mobile network
    移动通信网 应用服务端到端通信 密钥管理    		 China Telecommunication Standards
    End
    English PDF
    YD/T 2034.1-2009 Testing methods for IP video terminal equipment. Part 1: Terminal based on ITU-T H.323 recommEndation
    基于ip网络的视讯会议终端设备测试方法 第1部分：基于itu-t h.323协议的终端    		 China Telecommunication Standards
    End
    English PDF
    HG/T 2581.2-2009 Rubber-or plastics-coated fabrics. Determination of tear resistance. Part 2: Ballistic pEndulum method
    橡胶或塑料涂覆织物 耐撕裂性能的测定 第2部分：冲击摆锤法    		 China Chemical Industry Standards
    End
    English PDF
    HG/T 2150-2009 Measuring method of rubber calEnders and plastics calenders
    橡胶塑料压延机检测方法    		 China Chemical Industry Standards
    End
    English PDF

    Find out:500Items   |  To Page of: First -Previous-Next -Last  | 1 2 3

    　

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2025 All Rights Reserved

    		- Since 2001 -
     Focus on China Standards & Compliance Services

    www.gbstandards.org
    China National Standards