Cart:
Keyword:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| DL/T 347-2023 |
T-shaped clip {译} T型线夹 |
China Electricity Industry
Standards Shape, |
 English PDF |
| JG/T581-2023 |
Hot-rolled H-shaped steel and split T-shaped steel for construction {译} 建筑用热轧H型钢和剖分T型钢 |
China Building Industry
Standards Shape, |
English PDF |
| HB 8329-2013(2017) |
General core design requirements for special-shaped joints or nozzles used to connect engine ducts {译} 发动机导管连接用异型接头或管嘴通用芯部设计要求 |
China Aviation Industry
Standards Shape, |
English PDF |
| YD/T 4436.1-2023 |
Specifications for Function and Performance Evaluation of Home Smart Cameras Part 1: Human Shape Detection {译} 家用智能摄像头功能和性能评估规范 第1部分：人形检测 |
China Telecommunication Industry
Standards Shape, |
English PDF |
| YC/T 594-2023 |
Determination of the Shape of threshed tobacco leaves and slices Image method {译} 打叶烟叶 片烟形状的测定 图像法 |
China Tobacco Industry
Standards Shape, |
English PDF |
| YB/T 5183-2023 |
Special-shaped steel wire for automobile accessories, internal combustion engines, and flexible shafts {译} 汽车附件、内燃机、软轴用异型钢丝 |
China Metallurgy Industry
Standards Shape, |
English PDF |
| FZ/T 92043-2023 |
Melt spinning special-shaped hole spinneret {译} 熔融纺丝异形孔喷丝板 |
China Textile Industry
Standards Shape, |
English PDF |
| JC/T 2658-2022 |
Test method for three-dimensional Shape deviation of curved glass - laser scanning method {译} 曲面玻璃三维形状偏差测试方法 激光扫描法 |
China Building Material Industry
Standards Shape, |
English PDF |
| YS/T 1542-2022 |
Green Factory Evaluation Requirements for Production of Copper and Copper Alloy Rods, Shapes and Wires {译} 铜及铜合金棒、型、线材生产绿色工厂评价要求 |
China Non-ferrous Metal Industry
Standards Shape, |
English PDF |
| YS/T 1532-2022 |
Metal Injection Molding of Titanium and Titanium Alloy Shaped Parts {译} 金属注射成形钛及钛合金异形件 |
China Non-ferrous Metal Industry
Standards Shape, |
English PDF |
| HG/T 6048-2022 |
O-shaped rubber sealing ring for roller cone bit {译} 牙轮钻头用O形橡胶密封圈 |
China Chemistry Industry
Standards Shape, |
English PDF |
| YB/T 4972-2022 |
Hot-rolled H-shaped steel for boiler steel structure {译} 锅炉钢结构用热轧H型钢 |
China Metallurgy Industry
Standards Shape, |
English PDF |
| JB/T 5105-2022 |
Casting Shape Draft angle {译} 铸件模样 起模斜度 |
China Machinery Industry
Standards Shape, |
English PDF |
| JB/T 14380-2022 |
High-speed special-shaped lollipop processing equipment {译} 高速异形棒糖加工设备 |
China Machinery Industry
Standards Shape, |
English PDF |
| YY/T 1771-2021 |
Determination of phase transition temperature of NiTi Shape memory alloy by bending-free recovery method {译} 弯曲-自由恢复法测试镍钛形状记忆合金相变温度 |
China Pharmaceutics Industry
Standards Shape, |
English PDF |
| JC/T 2602-2021 |
Prestressed Concrete U-Shaped Sheet Pile{译} {译} 预应力混凝土U形板桩 |
China Building Material Industry
Standards Shape, |
English PDF |
| JC/T 2598-2021 |
Shape and size of refractory bricks for cement precalciner kiln{译} {译} 水泥预分解窑用耐火砖形状尺寸 |
China Building Material Industry
Standards Shape, |
English PDF |
| DL/T 2453—2021 |
Specifications for zero-value high-voltage shock testing of disc-shaped suspension porcelain insulators {译} 盘形悬式瓷绝缘子零值高压冲击检测规范 |
China Electricity Industry
Standards Shape, |
English PDF |
| YB/T 4931-2021 |
Low magnification structure defect rating chart of continuous cast steel special-shaped billet{译} {译} 连铸钢异型坯低倍组织缺陷评级图 |
China Metallurgy Industry
Standards Shape, |
English PDF |
| YS/T 1451-2021 |
T-shaped copper material for electrical switches{译} {译} 电器开关用T型铜材 |
China Non-ferrous Metal Industry
Standards Shape, |
English PDF |
| GA/T 1936-2021 |
Forensic Science Chemical Fiber Evidence Cross Section Shape Examination Microscopy {译} 法庭科学 化学纤维物证横截面形状检验 显微镜法 |
China Security Industry
Standards Shape, |
English PDF |
| JB/T 14104-2020 |
Special-shaped sedimentation tank scraper {译} 异形沉淀池刮泥机 |
China Machinery Industry
Standards Shape, |
English PDF |
| JB/T 14012-2020 |
Design specification for ring rolling dies for special-shaped ring forgings {译} 异形环锻件辗环模 设计规范 |
China Machinery Industry
Standards Shape, |
English PDF |
| YS/T 1350-2020 |
Silver Oxygen-Free Copper Shaped Wire Billet for Motor Commutator {译} 电机整流子用银无氧铜异型线坯 |
China Non-ferrous Metal Industry
Standards Shape, |
English PDF |
| QB/T 5532-2020 |
Shape and size of piano metal connectors and fasteners {译} 钢琴金属连接件、紧固件的形制与尺寸 |
China Light Industry Industry
Standards Shape, |
English PDF |
| FZ/T 73019.2-2020 |
Knit Shapewear Adjustable {译} 针织塑身内衣 调整型 |
China Textile Industry
Standards Shape, |
English PDF |
| FZ/T 14040-2017 |
Printed or dyed cotton and profiled cross-shaped polyamide 66 filament interweaved fabric 棉与十字形锦纶66长丝交织印染布 |
China Textile & Garment industry
Standards Shape, |
English PDF |
| QB/T 5040-2017 |
(Y-shaped wire) y形金属丝 |
China Light Industry
Standards Shape, |
English PDF |
| JT/T 1106-2016 |
(S - shaped steel wire for main cable winding of suspension bridge) 悬索桥主缆缠绕用s形钢丝 |
China Highway & Transportation
Standards Shape, |
English PDF |
| FZ/T 70012-2016 |
Size of body shaped seamless underwear 一次成型束身无缝内衣号型 |
China Textile & Garment industry
Standards Shape, |
English PDF |
| JG/T 136-2016 |
HubShape inlay joins of single layer lattice shells 单层网壳嵌入式毂节点 |
China Building & Construction
Standards Shape, |
English PDF |
| LS/T 6116-2016 |
Classification and judgement of rice in grain shape 大米粒型分类判定 |
China Food industry
Standards Shape, |
English PDF |
| SN/T 4367.8-2015 |
(The inspection of import and export steel - Part 8: Shaped Steel) 进出口钢管检验规程 第8部分：异型钢管 |
China Import Export Inspection
Standards Shape, |
English PDF |
| JJF 1548-2015 |
Calibration Specification for Wedge-Shape Filler Gauges 楔形塞尺校准规范 |
China Metrological
Standards Shape, |
English PDF |
| DL/T 1471-2015 |
(HVDC lines with a disc-shaped porcelain or glass composite suspension insulator string element) 高压直流线路用盘形悬式复合瓷或玻璃绝缘子串元件 |
China Electricity & Power
Standards Shape, |
English PDF |
| DL/T 1470-2015 |
(AC system with a disc-shaped porcelain or glass composite suspension insulator string element) 交流系统用盘形悬式复合瓷或玻璃绝缘子串元件 |
China Electricity & Power
Standards Shape, |
English PDF |
| JT/T 185.3-2015 |
Repairing technical requirement for special equipment of trailing suction hopper dredger - Part 3: Box-shaped bottom door 耙吸挖泥船专用设备修理技术要求 第3部分：方形泥门 |
China Highway & Transportation
Standards Shape, |
English PDF |
| JG/T 457-2014 |
Building T-Shape rebated doors 建筑用t型门 |
China Building & Construction
Standards Shape, |
English PDF |
| SJ/T 11459.7.1-2014 |
(The liquid crystal display devices - Part 7-1: Passive liquid crystal display window Shape and size preferred series) 液晶显示器件 第7-1部分：无源液晶显示器件外形和窗口优选尺寸系列 |
China Electronics
Standards Shape, |
English PDF |
| JG/T 461-2014 |
Permanent inverted T-shaped pre-stressed formwork for concrete composite slab 倒t形预应力叠合模板 |
China Building & Construction
Standards Shape, |
English PDF |
| QB/T 4717-2014 |
CNC plate-Shape flexible material cutting machines 柔性材料用数控平板切割机 |
China Light Industry
Standards Shape, |
English PDF |
| YY/T 0873.2-2014 |
Dentistry. Number coding system for rotary instruments. Part 2: Shapes 牙科 旋转器械的数字编码系统 第2部分:形状 |
China Medicine & Medical Device
Standards Shape, |
English PDF |
| YY/T 0873.2-2014 |
Dentistry - Numerical coding systems for rotary instruments - Part 2: Shape{译} {译} 牙科 旋转器械的数字编码系统 第2部分：形状 |
China Pharmaceutics Industry
Standards Shape, |
English PDF |
| FZ/T 73019.2-2013 |
Knitted Shape wear. Figured-style 针织塑身内衣 调整型 |
China Textile & Garment industry
Standards Shape, |
English PDF |
| FZ/T 50002-2013 |
Testing method for Shape factor of man-made fiber 化学纤维异形度试验方法 |
China Textile & Garment industry
Standards Shape, |
English PDF |
| QB/T 4537-2013 |
Leather machines-Y Shape stainless steel drum 制革机械 Y形不锈钢分格转鼓 |
China Light Industry
Standards Shape, |
English PDF |
| QB/T 2049.9-2013 |
Glass bulb dimensions for lamps. T series shapes 灯用玻壳 T型玻壳尺寸系列 |
China Light Industry
Standards Shape, |
English PDF |
| QB/T 2049.8-2013 |
Glass bulb dimensions for lamps. R series shapes 灯用玻壳 R型玻壳尺寸系列 |
China Light Industry
Standards Shape, |
English PDF |
| QB/T 2049.7-2013 |
Glass bulb dimensions for lamps. P series shapes 灯用玻壳 P型玻壳尺寸系列 |
China Light Industry
Standards Shape, |
English PDF |
| QB/T 2049.6-2013 |
Glass bulb dimensions for lamps. M series shapes 灯用玻壳 M型玻壳尺寸系列 |
China Light Industry
Standards Shape, |
English PDF |
| QB/T 2049.5-2013 |
Glass bulb dimensions for lamps. K series shapes 灯用玻壳 K型玻壳尺寸系列 |
China Light Industry
Standards Shape, |
English PDF |
| QB/T 2049.4-2013 |
Glass bulb dimensions for lamps. G series shapes 灯用玻壳 G型玻壳尺寸系列 |
China Light Industry
Standards Shape, |
English PDF |
| QB/T 2049.3-2013 |
Glass bulb dimensions for lamps. BT series shapes 灯用玻壳 BT型玻壳尺寸系列 |
China Light Industry
Standards Shape, |
English PDF |
| QB/T 2049.2-2013 |
Glass bulb dimensions for lamps. B series shapes 灯用玻壳 B型玻壳尺寸系列 |
China Light Industry
Standards Shape, |
English PDF |
| QB/T 2049.1-2013 |
Glass bulb dimensions for lamps. A series shapes 灯用玻壳 A型玻壳尺寸系列 |
China Light Industry
Standards Shape, |
English PDF |
| QB/T 2049.11-2013 |
Glass bulb dimensions for lamps. C, E, F and PAR series shapes 灯用玻壳 C型、E型、F型和PAR型玻壳尺寸系列 |
China Light Industry
Standards Shape, |
English PDF |
| QB/T 2049.10-2013 |
Glass bulb dimensions for lamps. ED series shapes 灯用玻壳 ED型玻壳尺寸系列 |
China Light Industry
Standards Shape, |
English PDF |
| JC/T 2127-2012 |
Code for construction ad acceptance of unshaped refractory used in building material industry 建材工业用不定形耐火材料施工及验收规范 |
China Building Materials
Standards Shape, |
English PDF |
| YY/T 0019.1-2011 |
Implants for surgery. Intramedullary nailing systems. Part 1: Intramedullary nails with cloverleaf or V-shaped cross-section 外科植入物 髓内钉系统 第1部分：横截面为三叶形或v形髓内钉 |
China Medicine & Medical Device
Standards Shape, |
English PDF |
| CJJ 161-2011 |
Technical specification for egg-shaped digester of sewage treatment 污水处理卵形消化池工程技术规程 |
China Urban Construction industry
Standards Shape, |
English PDF |
| QB/T 1586.4-2010 |
Hardware fitting of case and bag. Welding for aluminum shapes 箱包五金配件 箱用铝合金型材 |
China Light Industry
Standards Shape, |
English PDF |
| JC/T 491-2010 |
Method for classifying reinforced plastic pultruded shapes according to composition 增强塑料拉挤型材按组分分类方法 |
China Building Materials
Standards Shape, |
English PDF |
| JC/T 490-2010 |
Dimensional tolerance of thermosetting glass fibre reinforced plastics pultruded shapes 玻璃纤维增强热固性塑料拉挤型材尺寸公差 |
China Building Materials
Standards Shape, |
English PDF |
| QC/T 666-2010 |
Automotive air conditioning (HFC-134a) - Part 1 Seals: O -shaped rubber seals 汽车空调(hfc-134a)用密封件 第1部分： o形橡胶密封圈 |
China Automobile & Vehicle industry
Standards Shape, |
English PDF |
| JT/T 674-2007 |
Shape selector of glass beads 玻璃珠选形器 |
China Highway & Transportation
Standards Shape, |
English PDF |
| JJG(JT)073-2007 |
Shape Selector of Glass Beads |
China Metrological
Standards Shape, |
English PDF |
| JJG 073-2007 |
Shape Selector of Glass Beads |
China Metrological
Standards Shape, |
English PDF |
| SY/T 10051.2-2005 |
Rolled shapes with improved notch toughness 改良缺口韧性的轧制型钢规范 |
China Oil & Gas Industry
Standards Shape, |
English PDF |
| TB/T 3103.9-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 9: Reducing straight couplings 机车车辆用锥面卡套式管接头 第9部分:异径直通管接头 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.8-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 8: Tee coupling bodies 机车车辆用锥面卡套式管接头 第8部分:三通管接头体 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.7-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 7: Tee couplings 机车车辆用锥面卡套式管接头 第7部分:三通管接头 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.6-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 6: Angle couplings bodies 机车车辆用锥面卡套式管接头 第6部分:直角管接头体 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.5-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 5: Angle couplings 机车车辆用锥面卡套式管接头 第5部分:直角管接头 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.4-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 4: Straight coupling bodies 机车车辆用锥面卡套式管接头 第4部分:直通管接头体 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.3-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 3: Straight couplings 机车车辆用锥面卡套式管接头 第3部分:直通管接头 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.22-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 22:Rubber O-rings 机车车辆用锥面卡套式管接头 第22部分:o型橡胶圈 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.2-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 2: Rubber sealing rings 机车车辆用锥面卡套式管接头 第2部分:橡胶密封环 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.21-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 21:Meter-pipe intubatton straight couplings 机车车辆用锥面卡套式管接头 第21部分:表管插管直通管接头 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.20-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 20:Cone thread angle coupling bodies 机车车辆用锥面卡套式管接头 第20部分:管锥直角管接头体 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.19-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 19:Cone thread angle couplings 机车车辆用锥面卡套式管接头 第19部分:管锥直角管接头 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.18-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 18:Columned thread straight coupling bodies 机车车辆用锥面卡套式管接头 第18部分:管柱直通管接头体 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.17-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 17:Columned thread straight couplings 机车车辆用锥面卡套式管接头 第17部分:管柱直通管接头 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.16-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 16:Cone thread straight coupling bodies 机车车辆用锥面卡套式管接头 第16部分:管锥直通管接头体 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.15-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 15:Cone thread straight couplings 机车车辆用锥面卡套式管接头 第15部分:管锥直通管接头 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.14-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 14:Meter-pipe straight coupling bodies 机车车辆用锥面卡套式管接头 第14部分:表管直通管接头体 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.13-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 13: Meter-pipe straight couplings 机车车辆用锥面卡套式管接头 第13部分:表管直通管接头 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.12-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 12: Intubatton straight coupling bodies 机车车辆用锥面卡套式管接头 第12部分:插管直通管接头体 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.1-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 1: Elastical ferruie 机车车辆用锥面卡套式管接头 第1部分:弹性卡套 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.11-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 11: Intubatton straight couplings 机车车辆用锥面卡套式管接头 第11部分:插管直通管接头 |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 3103.10-2005 |
Cone-shaped bayonet ring couplings for rolling stock. Part 10: Reducing straight coupling bodies 机车车辆用锥面卡套式管接头 第10部分:异径直通管接头体 |
China Railway & Train
Standards Shape, |
English PDF |
| QB/T 2678-2004 |
Footwear machines. The hot Shape machine 制鞋机械 箱式湿热定型机 |
China Light Industry
Standards Shape, |
English PDF |
| QB/T 2619-2003 |
Special-shaped-yarn drier fabric for paper-making 造纸用异形丝干燥网 |
China Light Industry
Standards Shape, |
English PDF |
| TB/T 3015.7-2001 |
The overall railway vehicle wheels Dimensions inspection gages conditions. Railway passenger car of KKD wheels and trucks with HDS car spoke plate Shape inspection template 铁道车辆整体车轮外形尺寸检测量具技术条件 铁道客车用kkd车轮及货车用hds车轮辐板形状检查样板 |
China Railway & Train
Standards Shape, |
English PDF |
| JC/T 867-2000 |
Construction U Shape glass 建筑用U型玻璃 |
China Building Materials
Standards Shape, |
English PDF |
| HG/T 21640.3-2000 |
General drawings of tubular frames of H shaped steel structures (stand-alone type tubular frames) H型钢钢结构管架通用（独立式管架） |
China Chemical Industry
Standards Shape, |
English PDF |
| HG/T 21640.2-2000 |
General drawings of tubular frames of H shaped steel structures (stringer type tubular frames) H型钢钢结构管架通用图（纵梁式管架） |
China Chemical Industry
Standards Shape, |
English PDF |
| HG/T 21640.1-2000 |
General drawings of tubular frames of H shaped steel structures (frame type tubular frames) H型钢钢结构管架通用图（桁架式管架） |
China Chemical Industry
Standards Shape, |
English PDF |
| QB/T 2401-1998 |
(Shape, size and name of the watch movement) 手表机心的形状、尺寸和名称 |
China Light Industry
Standards Shape, |
English PDF |
| TB/T 2561-1995 |
(Railway passenger with an S-shaped spokes of the wheel types and basic dimensions) 铁道客车用s形辐板车轮型式与基本尺寸 |
China Railway & Train
Standards Shape, |
English PDF |
| QB/T 2214-1996 |
(Determination of the size of the carpet and rug shaped) 地毯尺寸及毯形的测定 |
China Light Industry
Standards Shape, |
English PDF |
| FZ 66313-1995 |
(Shaped special industrial zone) 特种工业用异型带 |
China Textile & Garment industry
Standards Shape, |
English PDF |
| SJ/T 31428-1994 |
Requirements of readiness and methods of inspection and assessment for Shape cutting machines 仿形切割机完好要求和检查评定方法 |
China Electronics
Standards Shape, |
English PDF |
| YY/T 0160-1994 |
(Straight tube-shaped quartz UV disinfection low-pressure mercury lamp) 直管形石英紫外线低压汞消毒灯 |
China Medicine & Medical Device
Standards Shape, |
English PDF |
| SJ/T 31356-1994 |
Requirements of readiness and methods of inspection and assessment for circular (O-shaped) vacuumizing production lines 环形（o形）抽真空生产线完好要求和检查评定方法 |
China Electronics
Standards Shape, |
English PDF |
| SJ 20140-1992 |
Shape and size of section of shaped aluminium for military shelter 军用温差电致冷组件失效率试验方法 |
China Electronics
Standards Shape, |
English PDF |
| QB/T 1529-1992 |
(Shaped planer woodworking machine) 木工机用异型刨刀 |
China Light Industry
Standards Shape, |
English PDF |
| JJG(JG)0001-1992 |
Metrological Verification Regulation of Hot Ball shaped Anemometer |
China Metrological
Standards Shape, |
English PDF |
| HG/T 21541-1992 |
General drawing of standard joints for welding H shaped steel 焊接H型钢标准节点通用图 |
China Chemical Industry
Standards Shape, |
English PDF |
| FZ/T 90014-1991 |
(Shaper empty magazine slots) 插齿空刀槽 |
China Textile & Garment industry
Standards Shape, |
English PDF |
| HG 21627-1990 |
(Multilayer U-shaped bellows expansion joints Series) |
China Chemical Industry
Standards Shape, |
English PDF |
| TB 1967-1987 |
(Locomotive vehicle wheel rim tread wear pattern shape) |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 1670.21-1985 |
(15 coupler lock mentioning Shape model) |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 1670.15-1985 |
(15 coupler push iron Shape model) |
China Railway & Train
Standards Shape, |
English PDF |
| TB/T 1476-1983 |
(Railway signal boxes, racks, cabinets Shape basic dimensions series) |
China Railway & Train
Standards Shape, |
English PDF |
| Find out:114Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
