Cart:
Keyword:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| HB 8570-2020 |
Aviation wire test methods {译} 航空电线试验方法 |
China Aviation Industry
Standards Wire method |
 English PDF |
| YD/T 1484.9-2023 |
Wireless terminal space radio frequency radiation power and receiver performance measurement method Part 9: 5G NR wireless terminal (Sub-6GHz) {译} 无线终端空间射频辐射功率和接收机性能测量方法 第9部分：5G NR无线终端（Sub-6GHz） |
China Telecommunication Industry
Standards Wire method |
English PDF |
| YD/T 1484.1-2023 |
Wireless terminal space radio frequency radiated power and receiver performance measurement methods Part 1: General requirements {译} 无线终端空间射频辐射功率和接收机性能测量方法 第1部分：通用要求 |
China Telecommunication Industry
Standards Wire method |
English PDF |
| YD/T 4196-2023 |
Determination of spatial average peak specific absorption rate (SAR) in the human body General requirements for wireless communication equipment (30MHz-6GHz) Finite element method (FEM) calculation of SAR {译} 确定人体内空间平均峰值比吸收率（SAR） 无线通信设备（30MHz-6GHz） 有限元法（FEM）计算SAR的通用要求 |
China Telecommunication Industry
Standards Wire method |
English PDF |
| HG/T 6111-2022 |
Treatment and disposal method of steel wire rope pickling waste liquid {译} 钢丝绳酸洗废液的处理处置方法 |
China Chemistry Industry
Standards Wire method |
English PDF |
| YB/T 6079-2022 |
Bead wire test method {译} 胎圈钢丝试验方法 |
China Metallurgy Industry
Standards Wire method |
English PDF |
| YD/T 4137-2022 |
Functions, performance requirements and test methods of home 4K high-definition IPTV set-top box WLAN and other same-frequency or similar-frequency wireless transmission based on telecommunication network {译} 基于电信网的家庭4K高清IPTV机顶盒WLAN和其他同频率或相近频率无线传输的功能、性能要求和测试方法 |
China Telecommunication Industry
Standards Wire method |
English PDF |
| YD/T 4007-2022 |
Wireless short-distance communication—Technical requirements and test methods for vehicle air interface {译} 无线短距通信 车载空口技术要求和测试方法 |
China Telecommunication Industry
Standards Wire method |
English PDF |
| YD/T 1484.6-2021 |
Wireless terminal space radio frequency radiated power and receiver performance measurement methods - Part 6: LTE wireless terminal {译} 无线终端空间射频辐射功率和接收机性能测量方法 第6部分：LTE无线终端 |
China Telecommunication Industry
Standards Wire method |
English PDF |
| YD/T 2869.1-2021 |
Terminal MIMO antenna performance requirements and measurement methods Part 1: LTE wireless terminals {译} 终端MIMO天线性能要求和测量方法 第1部分：LTE无线终端 |
China Telecommunication Industry
Standards Wire method |
English PDF |
| YD/T 3848-2021 |
LTE-based vehicle networking wireless communication technology Test method for vehicle terminal equipment supporting direct communication {译} 基于LTE的车联网无线通信技术 支持直连通信的车载终端设备测试方法 |
China Telecommunication Industry
Standards Wire method |
English PDF |
| YD/T 3847-2021 |
LTE-based vehicle networking wireless communication technology Roadside equipment test method supporting direct communication {译} 基于LTE的车联网无线通信技术 支持直连通信的路侧设备测试方法 |
China Telecommunication Industry
Standards Wire method |
English PDF |
| YD/T 3819-2021 |
Source address verification test method under public wireless LAN access mode {译} 公众无线局域网接入方式下源地址验证测试方法 |
China Telecommunication Industry
Standards Wire method |
English PDF |
| YB/T 4933-2021 |
Steel wire for elevator wire rope - Test method for Vickers hardness{译} {译} 电梯钢丝绳用钢丝 维氏硬度试验方法 |
China Metallurgy Industry
Standards Wire method |
English PDF |
| YD/T 4001-2021 |
Service quality index requirements and test methods for public wireless local area networks{译} {译} 公众无线局域网业务服务质量指标要求和测试方法 |
China Telecommunication Industry
Standards Wire method |
English PDF |
| FZ/T 01157-2021 |
Textiles - Test for colour fastness to flat rubbing - Wire mesh method{译} {译} 纺织品 耐平磨色牢度试验 金属丝网法 |
China Textile Industry
Standards Wire method |
English PDF |
| YD/T 3793.2-2020 |
Test method for Single Wire Protocol (SWP) between Universal Integrated Circuit Card (UICC) and Contactless Communication Module (CLF) of Digital Mobile Communication Terminal Part 2: UICC Characteristics {译} 数字移动通信终端通用集成电路卡（UICC）与非接触通信模块（CLF）间单线协议（SWP）测试方法 第2部分：UICC特性 |
China Telecommunication Industry
Standards Wire method |
English PDF |
| YD/T 3793.1-2020 |
Test method for Single Wire Protocol (SWP) between Universal Integrated Circuit Card (UICC) and Contactless Communication Module (CLF) for digital mobile communication terminals Part 1: Terminal characteristics {译} 数字移动通信终端通用集成电路卡（UICC）与非接触通信模块（CLF）间单线协议（SWP）测试方法 第1部分：终端特性 |
China Telecommunication Industry
Standards Wire method |
English PDF |
| NB/T 31102.2-2016 |
(Sintered magnet wires for wind turbine generator sets - Part 2: Test methods) 风力发电机组 发电机用烧结电磁线 第2部分：试验方法 |
China Energy industry
Standards Wire method |
English PDF |
| YD/T 3045-2016 |
(900MHz WCDMA digital cellular mobile telecommunication network Wireless access subsystem Technical Requirements and Test Methods) 900mhz wcdma数字蜂窝移动通信网 无线接入子系统设备技术要求与测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 1484.5-2016 |
(The wireless terminal space radiated RF power and receiver performance measuring methods - Part 5: TD-SCDMA wireless terminal) 无线终端空间射频辐射功率和接收机性能测量方法 第5部分：td-scdma无线终端 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 2950-2015 |
(5GHz Wireless Access System Dynamic Frequency Selection (DFS) technology requirements and test methods) 5ghz无线接入系统动态频率选择（dfs）技术要求和测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 2874-2015 |
(LTE wireless network security gateways testing methods) lte无线网络安全网关测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 2869.1-2015 |
(MIMO terminal antenna performance requirements and measuring methods - Part 1: LTE wireless terminal) 终端mimo天线性能要求和测量方法 第1部分：lte无线终端 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 1643-2015 |
(The compatibility requirements of the wireless communications device and the hearing aid and test methods) 无线通信设备与助听器的兼容性要求和测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 1312.16-2015 |
(The wireless communication device electromagnetic compatibility requirements and measuring methods - Part 16: Mobile Satellite Communication System terminal earth stations) 无线通信设备电磁兼容性要求和测量方法 第16部分：卫星移动通信系统终端地球站 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 1312.1-2015 |
(The wireless communication device electromagnetic compatibility requirements and measuring methods - Part 1: General requirements) 无线通信设备电磁兼容性要求和测量方法 第1部分：通用要求 |
China Telecommunication
Standards Wire method |
English PDF |
| JT/T 987-2015 |
(Wire rope piece - polymer mortar construction methods Wire Rope) 钢丝绳网片-聚合物砂浆加固工法用钢丝绳 |
China Highway & Transportation
Standards Wire method |
English PDF |
| SJ/T 11531-2015 |
Wireless technical standards and test methods of read-write device for electronic label 电子标签读写设备无线技术指标和测试方法 |
China Electronics
Standards Wire method |
English PDF |
| YD/T 2740.6-2014 |
(Wireless communication indoor signal distribution systems - Part 6: Network inspection methods) 无线通信室内信号分布系统 第6部分：网络验收方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 2740.5-2014 |
(Wireless communication indoor signal distribution systems - Part 5: Passives technical requirements and test methods) 无线通信室内信号分布系统 第5部分：无源器件技术要求和测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 2740.4-2014 |
(Part 4 wireless communication indoor signal distribution systems: optical equipment technical requirements and test methods) 无线通信室内信号分布系统 第4部分：光纤设备技术要求和测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 2740.3-2014 |
(Wireless communication indoor signal distribution systems - Part 3: Requirements and test methods amplifier technology) 无线通信室内信号分布系统 第3部分：放大器技术要求和测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 2740.2-2014 |
(Wireless communication indoor signal distribution systems - Part 2: Cables (including leaky cable) technical requirements and test methods) 无线通信室内信号分布系统 第2部分：电缆（含漏泄电缆）技术要求和测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 2654-2013 |
Requirements and test methods of electromagnetic compatibility for wireless power supply equipment 无线电源设备电磁兼容性要求和测量方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 2614-2013 |
Test method for terminal of SCDMA broadband wireless access system supporting trunking service 支持集群业务的SCDMA宽带无线接入系统 终端测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 2613-2013 |
Test method for system of SCDMA broadband wireless access system supporting trunking service 支持集群业务的SCDMA宽带无线接入系统 系统测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 2612-2013 |
Test method for air interface of SCDMA broadband wireless aceess system support trunking service 支持集群业务的SCDMA宽带无线接入系统 空中接口测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 1484.6-2013 |
Measurement method for radiated RF power and receiver performance of wireless device. Part 6: LTE wireless device 无线终端空间射频辐射功率和接收机性能测量方法 第6部分：LTE无线终端 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 1312.12-2012 |
Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 12: fixed broadband wireless access system basestation and its ancillary equipment 无线通信设备电磁兼容性要求和测量方法 第12部分：固定宽带无线接入系统 基站及其辅助设备 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 2236-2011 |
Technical requirements and testing methods for repeater used in SCDMA broadband wireless access system 1800mhz scdma宽带直放站技术要求和测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 2118-2010 |
Test method for terminal of 1800MHz SCDMA broadband wireless access system 1800mhz scdma宽带无线接入系统 终端测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 2116-2010 |
Test method for system of 1800MHz SCDMA broadband wireless acess system 1800mhz scdma宽带无线接入系统 系统测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 1312.11-2010 |
Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 11: Fixed broadband wireless access system user equipment and its ancillary equipment 无线通信设备电磁兼容性要求和测量方法 第11部分：固定宽带无线接入系统 用户站及其辅助设备 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 1989-2009 |
Test method for air interface of 1800MHz SCDMA broadband wireless access system 1800mhz scdma宽带无线接入系统 空中接口测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| SN/T 2268-2009 |
Determination of organic volatiles in enameled wire. Headspace-GC-MS method 漆包线中有机挥发物含量的测定 顶空气相色谱-质谱法 |
China Import Export Inspection
Standards Wire method |
English PDF |
| JJF 044-2009 |
The cigarette end tribal wire tester VRof rotary box method |
China Metrological
Standards Wire method |
English PDF |
| JJF 043-2009 |
The cigarette end tribal wire tester VRof rotating cage method |
China Metrological
Standards Wire method |
English PDF |
| YD/T 1626-2007 |
Technical Requirement and Test Methods for Fixed Wireless Telephone 固定无线电话机技术要求和测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 1393-2005 |
Testing methods of Wireless Application Protocol (WAP) gateway 无线应用协议(wap)网关设备测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 1336-2005 |
800MHz CDMA digital cellular mobile telecommunication network Wireless Intelligent Network (WIN). Phase 2:Interface test method 800mhz cdma数字蜂窝移动通信网无线智能网(win)阶段2:接口测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 1312.5-2004 |
Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 5: Radio Frequency (RF) audio link equipment and wireless microphones 无线通信设备电磁兼容性要求和测量方法 第5部分:无线语音链路设备和无线话筒 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 1306-2004 |
800MHz CDMA digital cellular mobile communication network Wireless Intelligent Network (WIN). Phase 1:Test method for prepaid charging service 800mhz cdma数字蜂窝移动通信网无线智能网(win)阶段1:预付费业务测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 1307-2004 |
800MHz CDMA digital cellular mobile telecommunication network Wireless Intelligent Network (WIN). Phase 1:Interface test method 800mhz cdma数字蜂窝移动通信网无线智能网(win)阶段1:接口测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 1225-2002 |
800MHz CDMA digital cellular mobile communication network Wireless Intelligence Network(WIN). Phase 1:Equipment methods of Service of Service Control Point(SSP) 800mhz cdma数字蜂窝移动通信网无线智能网(win)阶段1:业务控制点(scp)设备测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 1224-2002 |
800MHz CDMA digital cellular mobile communication network Wireless Intelligence Network(WIN). Phase 1:Equipment methods of Service of Service Switching Point(SSP) 800mhz cdma数字蜂窝移动通信网无线智能网(win)阶段1:业务交换点(ssp)设备测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| YD/T 1009-1999 |
Technical performances and test methods of FDMA wireless access systems for 450MHz 450mhz fdma无线接入系统技术要求和测量方法 |
China Telecommunication
Standards Wire method |
English PDF |
| TB/T 2894-1998 |
(450MHz quad-band compatible train set single duplex wireless dispatch communication equipment technical requirements and test methods) 450mhz四频组单双工兼容铁路列车无线调度通信设备技术要求和试验方法 |
China Railway & Train
Standards Wire method |
English PDF |
| QB/T 2298-1997 |
(Wire method to measure the thermal expansion coefficient of glass line) 双线法测线热膨胀系数 |
China Light Industry
Standards Wire method |
English PDF |
| TB/T 2836-1997 |
(Grading Test Methods railway vehicle performance wire and cable fire) 铁道车辆用电线电缆火性能的定级试验方法 |
China Railway & Train
Standards Wire method |
English PDF |
| JC/T 631-1996 |
Test method of shock resistance of steel wire mesh reinforced cement slab 钢丝网水泥板抗冲击性能试验方法 |
China Building Materials
Standards Wire method |
English PDF |
| YD/T 828.312-1996 |
Measuring method of equipments used in digital microwave wireless transmission system Part 3 Measurement of satellite communication earth stations Section 12: Total system performances 数字微波传输系统中所用设备的测量方法 第3部分:卫星通信地球站的测量 第12节:总系统性能 |
China Telecommunication
Standards Wire method |
English PDF |
| SJ/T 10626-1995 |
Method for determining impurities in gold wire for semiconductor lead bonding by ICP-AES 键合金丝中杂质素的ｉｃｐ－ａｅｓ测定方法 |
China Electronics
Standards Wire method |
English PDF |
| HG/T 2724.7-1995 |
(Rubber wire test method given modulus of determination) |
China Chemical Industry
Standards Wire method |
English PDF |
| HG/T 2724.6-1995 |
(Rubber wire test heat aging test method) |
China Chemical Industry
Standards Wire method |
English PDF |
| SJ/T 31333-1994 |
Requirements of readiness and methods of inspection and assessment for automatic annular wire crest welders 环形线自动波峰焊机完好要求和检查评定方法 |
China Electronics
Standards Wire method |
English PDF |
| SJ/T 31330-1994 |
Requirements of readiness and methods of inspection and assessment for B512/ZF 24N and J8016 16N high-speed wire braiding machines jb512/zf型24nj8516型16n高速金属编织机完好要求和检查评定方法 |
China Electronics
Standards Wire method |
English PDF |
| SJ/T 31327-1994 |
Requirements of readiness and methods of inspection and assessment for tubular wire-stranding machines 管式绞线机完好要求和检查评定方法 |
China Electronics
Standards Wire method |
English PDF |
| SJ/T 31324-1994 |
Requirements of readiness and methods of inspection and assessment for LHT-120/17 fine wire drawing machines lht－120/17型细拉丝机完好要求和检查评定方法 |
China Electronics
Standards Wire method |
English PDF |
| SJ/T 31309-1994 |
Requirements of readiness and methods of inspection and assessment for automatic aluminum electrolysis capacitor lead wire flattening/trimming machines 铝电解电容器自动引线压平切边机完好要求和检查评定方法 |
China Electronics
Standards Wire method |
English PDF |
| SJ/T 31308-1994 |
Requirements of readiness and methods of inspection and assessment for automatic aluminum electrolysis capacitor lead wire butt-welding machines 铝电解电容器自动引线碰焊机完好要求和检查评定方法 |
China Electronics
Standards Wire method |
English PDF |
| SJ/T 31281-1994 |
Requirements of readiness and methods of inspection and assessment for tinned copper wire winding machines 镀锡铜丝绕线机完好要求和检查评定方法 |
China Electronics
Standards Wire method |
English PDF |
| SJ/T 31279-1994 |
Requirements of readiness and methods of inspection and assessment for WLD-T1 automatic non-inductance capacitor lead wire welding machines wld－t1型无感式电容器引线自动焊接机完好要求和检查评定方法 |
China Electronics
Standards Wire method |
English PDF |
| SJ/T 31139-1994 |
Requirements of readiness and methods of inspection and assessment for fluorescent light wire stretching machines 荧光灯绷丝机完好要求和检查评定方法 |
China Electronics
Standards Wire method |
English PDF |
| SJ/T 31207-1994 |
Requirements of readiness and methods of inspection and assessment for lead wire makers 导丝制造机完好要求和检查评定方法 |
China Electronics
Standards Wire method |
English PDF |
| SJ/T 31325-1994 |
Requirements of readiness and methods of inspection and assessment for small/medium wire drawing machines 中、小拉线机完好要求和检查评定方法 |
China Electronics
Standards Wire method |
English PDF |
| SJ/T 31182-1994 |
Requirements of readiness and methods of inspection and assessment for electronic lead wire and band laser welding machines 电子导丝与带子激光焊接机完好要求和检查评定方法 |
China Electronics
Standards Wire method |
English PDF |
| YD/T 521-1992 |
Test method of digital exchange analog interfaces and test method of transmission characteristics between (2-wire or 4-wire) analog interfaces 数字交换机模拟接口测试方法及模拟接口(二线或四线)间传输特性的测试方法 |
China Telecommunication
Standards Wire method |
English PDF |
| JJG(EJ)11-1991 |
(Determination of α by 2π multi-wire proportional counter, β plane source emission rate test method) |
China Metrological
Standards Wire method |
English PDF |
| Find out:79Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
