Cart:
Keyword:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| KA/T 7—2023 |
Coal mine water chemical analysis method {译} 煤矿水化学分析方法 |
China Mine safety industry
Standards method analysis |
 English PDF |
| JB/T 14411-2023 |
Diesel engine coated molecular sieve SCR catalyst chemical composition analysis method {译} 柴油机 涂覆式分子筛SCR 催化剂 化学成分分析方法 |
China Machinery Industry
Standards method analysis |
English PDF |
| JB/T 14410-2023 |
Diesel engine coated vanadium-based SCR catalyst chemical composition analysis method {译} 柴油机 涂覆式钒基 SCR催化剂 化学成分分析方法 |
China Machinery Industry
Standards method analysis |
English PDF |
| NB/T 11290-2023 |
Shale oil shale dynamic reservoir physical properties and fracture analysis methods {译} 页岩油 页岩动态储层物性及裂缝分析方法 |
China Energy Industry
Standards method analysis |
English PDF |
| NB/T 11287-2023 |
Fluorescence spectroscopic analysis method of organic microscopic components of mud shale {译} 泥页岩有机显微组分荧光光谱分析方法 |
China Energy Industry
Standards method analysis |
English PDF |
| HB 7716.18-2022 |
Spectral analysis method of chemical composition of titanium alloys Part 18: Determination of lithium and lead content by inductively coupled plasma atomic emission spectrometry {译} 钛合金化学成分光谱分析方法 第 18 部分：电感耦合等离子体原子发射光谱法测定锂、铅含量 |
China Aviation Industry
Standards method analysis |
English PDF |
| HB 7716.17-2022 |
Spectral analysis method of chemical composition of titanium alloys Part 17: Determination of boron content by inductively coupled plasma atomic emission spectrometry {译} 钛合金化学成分光谱分析方法 第 17 部分：电感耦合等离子体原子发射光谱法测定硼含量 |
China Aviation Industry
Standards method analysis |
English PDF |
| HB 7716.16-2022 |
Spectral analysis method of chemical composition of titanium alloys Part 16: Determination of platinum and palladium content by inductively coupled plasma atomic emission spectrometry {译} 钛合金化学成分光谱分析方法 第 16 部分：电感耦合等离子体原子发射光谱法测定铂、钯含量 |
China Aviation Industry
Standards method analysis |
English PDF |
| HB 7716.15-2022 |
Spectral analysis method of chemical composition of titanium alloys Part 15: Determination of tungsten, niobium, tantalum and nickel content by inductively coupled plasma atomic emission spectrometry {译} 钛合金化学成分光谱分析方法 第 15 部分：电感耦合等离子体原子发射光谱法测定钨、铌、钽、镍含量 |
China Aviation Industry
Standards method analysis |
English PDF |
| HB 8422-2014(2017) |
Electron probe quantitative analysis method of trace elements in alloys {译} 合金中微量元素电子探针定量分析方法 |
China Aviation Industry
Standards method analysis |
English PDF |
| YD/T 4199.4-2023 |
Cloud business user experience quality evaluation system based on cloud-network collaboration Part 4: Bottleneck analysis method {译} 基于云网协同的上云业务用户体验质量评价体系 第4部分：瓶颈分析方法 |
China Telecommunication Industry
Standards method analysis |
English PDF |
| YD/T 4199.3-2023 |
Cloud business user experience quality evaluation system based on cloud-network collaboration Part 3: Computational analysis method {译} 基于云网协同的上云业务用户体验质量评价体系 第3部分：计算分析方法 |
China Telecommunication Industry
Standards method analysis |
English PDF |
| DZ/T0064.70-2021 |
Methods for analysis of groundwater quality Part 70: Determination of oxygen consumption Potassium dichromate titration method {译} 地下水质分析方法 第70部分：耗氧量的测定重铬酸钾滴定法 |
China Geology & Mineralogy Industry
Standards method analysis |
English PDF |
| DZ/T0064.5—2021 |
Groundwater quality analysis methods Part 5: Determination of pH value Glass electrode method {译} 地下水质分析方法 第5部分：pH值的测定 玻璃电极法 |
China Geology & Mineralogy Industry
Standards method analysis |
English PDF |
| HG/T 6150-2023 |
X-ray fluorescence spectrometry method for chemical composition analysis of lubricating oil hydroisomerization catalyst {译} 润滑油加氢异构催化剂化学成分分析方法 X射线荧光光谱法 |
China Chemistry Industry
Standards method analysis |
English PDF |
| SN/T 5566-2023 |
General Rules of Laser Micro Raman Spectroscopy Analysis Method {译} 激光显微拉曼光谱分析方法通则 |
China Import&Export Inspection Industry
Standards method analysis |
English PDF |
| SN/T 5432-2023 |
Determination of antibacterial properties of antibacterial textiles ATP fluorescence analysis method {译} 抗菌纺织品抗菌性能的测定 ATP荧光分析法 |
China Import&Export Inspection Industry
Standards method analysis |
English PDF |
| JC/T 753-2022 |
Chemical analysis method of siliceous glass raw material {译} 硅质玻璃原料化学分析方法 |
China Building Material Industry
Standards method analysis |
English PDF |
| FZ/T 01163—2022 |
Determination of total lead and total cadmium content in textiles and their accessories X-ray fluorescence spectrometry (XRF) analysis method {译} 纺织品及其附件总铅和总镉含量的测定 X射线荧光光谱（XRF）分析法 |
China Textile Industry
Standards method analysis |
English PDF |
| FZ/T 01162—2022 |
Textiles - Quantitative chemical analysis - Mixtures of polyethylene fibers with certain other fibers (paraffin oil method) {译} 纺织品 定量化学分析 聚乙烯纤维与某些其他纤维的混合物（石蜡油法） |
China Textile Industry
Standards method analysis |
English PDF |
| FZ/T 01159—2022 |
Textiles - quantitative chemical analysis - mixture of silk and wool or other animal hair fibers (hydrochloric acid method) {译} 纺织品 定量化学分析 蚕丝与羊毛或其他动物毛纤维的混合物（盐酸法） |
China Textile Industry
Standards method analysis |
English PDF |
| FZ/T 01158—2022 |
Textiles - Determination of the itching sensation of fabrics - Vibration audio analysis method {译} 纺织品 织物刺痒感的测定 振动音频分析法 |
China Textile Industry
Standards method analysis |
English PDF |
| YS/T 1512.10-2022 |
Methods for chemical analysis of copper smelting dust - Part 10: Determination of copper, lead, zinc, bismuth, arsenic, indium, silver, cadmium, antimony, calcium, magnesium and iron - Inductively coupled plasma atomic emission spectrometry {译} 铜冶炼烟尘化学分析方法 第10部分：铜、铅、锌、铋、砷、铟、银、镉、锑、钙、镁和铁含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1585.4-2022 |
Methods for chemical analysis of silver-tungsten alloys - Part 4: Determination of carbon content - High-frequency induction furnace combustion infrared absorption method {译} 银钨合金化学分析方法 第4部分：碳含量的测定 高频感应炉燃烧红外吸收法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1585.3-2022 |
Silver-tungsten alloy chemical analysis methods - Part 3: Determination of cobalt, chromium, copper, magnesium, iron, potassium, sodium, tin, nickel, silicon, zinc content - Inductively coupled plasma atomic emission spectrometry {译} 银钨合金化学分析方法 第3部分：钴、铬、铜、镁、铁、钾、钠、锡、镍、硅、锌含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1585.2-2022 |
Methods for chemical analysis of silver-tungsten alloys - Part 2: Determination of tungsten content - Cinchonine gravimetric method {译} 银钨合金化学分析方法 第2部分：钨含量的测定 辛可宁重量法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1585.1-2022 |
Methods for chemical analysis of silver-tungsten alloys - Part 1: Determination of silver content - Potentiometric titration {译} 银钨合金化学分析方法 第1部分：银含量的测定 电位滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 341.7-2022 |
Methods for chemical analysis of nickel concentrates - Part 7: Determination of silver content - Flame atomic absorption spectrometry {译} 镍精矿化学分析方法 第7部分：银含量的测定 火焰原子吸收光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 341.6-2022 |
Methods for chemical analysis of nickel concentrates - Part 6: Determination of gold, platinum and palladium content - Fire assay for gold enrichment - inductively coupled plasma atomic emission spectrometry {译} 镍精矿化学分析方法 第6部分：金、铂和钯含量的测定 火试金富集-电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1582.3-2022 |
Methods for chemical analysis of crude antimony - Part 3: Determination of arsenic, lead, copper, selenium and iron content - Inductively coupled plasma atomic emission spectrometry {译} 粗锑化学分析方法 第3部分：砷、铅、铜、硒和铁含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1582.2-2022 |
Methods for chemical analysis of crude antimony - Part 2: Determination of gold content - Fire test gold gravimetric method {译} 粗锑化学分析方法 第2部分：金含量的测定 火试金重量法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1582.1-2022 |
Methods for chemical analysis of crude antimony - Part 1: Determination of antimony content - Cerium sulfate titration method {译} 粗锑化学分析方法 第1部分：锑含量的测定 硫酸铈滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 536.14-2022 |
Methods for chemical analysis of bismuth - Part 14: Determination of copper, lead, zinc, iron, silver, arsenic, tellurium and antimony - Inductively coupled plasma atomic emission spectrometry {译} 铋化学分析方法 第14部分：铜、铅、锌、铁、银、砷、碲和锑含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 424.5-2022 |
Methods for chemical analysis of titanium diboride powder - Part 5: Determination of oxygen content - Pulse heating inert gas fusion - infrared absorption method {译} 二硼化钛粉化学分析方法 第5部分：氧含量的测定 脉冲加热惰气熔融-红外吸收法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 424.4-2022 |
Methods for chemical analysis of titanium diboride powder - Part 4: Determination of carbon content - High frequency combustion infrared absorption method {译} 二硼化钛粉化学分析方法 第4部分：碳含量的测定 高频燃烧红外吸收法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 424.3-2022 |
Methods for chemical analysis of titanium diboride powder - Part 3: Determination of iron content - 1,10-phenanthroline spectrophotometric method {译} 二硼化钛粉化学分析方法 第3部分：铁含量的测定 1,10-邻二氮杂菲分光光度法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 424.2-2022 |
Methods for chemical analysis of titanium diboride powder - Part 2: Determination of total boron content - Neutralization titration {译} 二硼化钛粉化学分析方法 第2部分：总硼含量的测定 中和滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 424.1-2022 |
Methods for chemical analysis of titanium diboride powder - Part 1: Determination of titanium content - Iron ammonium sulfate titration method {译} 二硼化钛粉化学分析方法 第1部分：钛含量的测定 硫酸铁铵滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1057.5-2022 |
Cobalt tetroxide chemical analysis method - Part 5: Determination of carbon content - High frequency combustion - infrared absorption spectrometry {译} 四氧化三钴化学分析方法 第5部分：碳含量的测定 高频燃烧-红外吸收光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1057.4-2022 |
Methods for chemical analysis of cobalt tetroxide - Part 4: Determination of potassium and sodium content - Flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry {译} 四氧化三钴化学分析方法 第4部分：钾和钠含量的测定 火焰原子吸收光谱法和电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1057.3-2022 |
Methods for chemical analysis of cobalt tetroxide - Part 3: Determination of silicon content - Inductively coupled plasma atomic emission spectrometry {译} 四氧化三钴化学分析方法 第3部分：硅含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1569.6-2022 |
Lithium nickel manganese oxide chemical analysis methods - Part 6: Determination of potassium, sodium, calcium, iron, copper, chromium and cadmium content - Inductively coupled plasma atomic emission spectrometry {译} 镍锰酸锂化学分析方法 第6部分：钾、钠、钙、铁、铜、铬和镉含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1569.5-2022 |
Lithium nickel manganese oxide chemical analysis method - Part 5: Determination of chloride ion content - Ion selective electrode method {译} 镍锰酸锂化学分析方法 第5部分：氯离子含量的测定 离子选择性电极法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1569.4-2022 |
Lithium nickel manganese oxide chemical analysis method - Part 4: Determination of sulfate content - Ion chromatography {译} 镍锰酸锂化学分析方法 第4部分：硫酸根含量的测定 离子色谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1569.3-2022 |
Lithium nickel manganese oxide chemical analysis methods - Part 3: Determination of lithium content - Flame atomic absorption spectrometry {译} 镍锰酸锂化学分析方法 第3部分：锂含量的测定 火焰原子吸收光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1569.2-2022 |
Lithium nickel manganese oxide chemical analysis methods - Part 2: Determination of manganese content - Potentiometric titration {译} 镍锰酸锂化学分析方法 第2部分：锰含量的测定 电位滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1569.1-2022 |
Lithium nickel manganese oxide chemical analysis method - Part 1: Determination of nickel content - Diacetyl diacetyl oxime gravimetric method {译} 镍锰酸锂化学分析方法 第1部分：镍含量的测定 丁二酮肟重量法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1550.5-2022 |
Methods for chemical analysis of beryllium alloys - Part 5: Determination of oxygen content - Inert gas fusion infrared absorption method {译} 铍合金化学分析方法 第5部分：氧含量的测定 惰气熔融红外吸收法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1550.4-2022 |
Methods for chemical analysis of beryllium alloys - Part 4: Determination of carbon content - Infrared absorption method {译} 铍合金化学分析方法 第4部分：碳含量的测定 红外吸收法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1550.3-2022 |
Methods for chemical analysis of beryllium alloys - Part 3: Determination of silicon content - Molybdenum blue spectrophotometric method {译} 铍合金化学分析方法 第3部分：硅含量的测定 钼蓝分光光度法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1550.2-2022 |
Methods for chemical analysis of beryllium alloys - Part 2: Determination of silver, cobalt and germanium content - Inductively coupled plasma atomic emission spectrometry {译} 铍合金化学分析方法 第2部分：银、钴和锗含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1550.1-2022 |
Methods for chemical analysis of beryllium alloys - Part 1: Determination of beryllium content - Potassium fluoride titration {译} 铍合金化学分析方法 第1部分：铍含量的测定 氟化钾滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1563.7-2022 |
Methods for chemical analysis of molybdenum-rhenium alloys - Part 7: Determination of hydrogen content - Inert gas fusion - infrared absorption method and thermal conductivity method {译} 钼铼合金化学分析方法 第7部分：氢含量的测定 惰性气体熔融-红外吸收法和热导法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1563.6-2022 |
Molybdenum-rhenium alloy chemical analysis methods - Part 6: Determination of oxygen and nitrogen content - Inert gas fusion - infrared absorption method and thermal conductivity method {译} 钼铼合金化学分析方法 第6部分：氧和氮含量的测定 惰性气体熔融-红外吸收法和热导法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1563.5-2022 |
Molybdenum-rhenium alloy chemical analysis method - Part 5: Determination of carbon and sulfur content - High frequency combustion infrared absorption method {译} 钼铼合金化学分析方法 第5部分：碳和硫含量的测定 高频燃烧红外吸收法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1563.4-2022 |
Molybdenum-rhenium alloy chemical analysis methods - Part 4: Determination of aluminum, calcium, copper, iron, magnesium, manganese, nickel, tin, tungsten content - Inductively coupled plasma mass spectrometry {译} 钼铼合金化学分析方法 第4部分：铝、钙、铜、铁、镁、锰、镍、锡、钨含量的测定 电感耦合等离子体质谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1563.3-2022 |
Molybdenum-rhenium alloy chemical analysis methods - Part 3: Determination of aluminum, calcium, copper, iron, magnesium, manganese, silicon, titanium content - Inductively coupled plasma atomic emission spectrometry {译} 钼铼合金化学分析方法 第3部分：铝、钙、铜、铁、镁、锰、硅、钛含量的测定 电感耦合等离子原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1563.2-2022 |
Methods for chemical analysis of molybdenum-rhenium alloys - Part 2: Determination of molybdenum content - Lead molybdate gravimetric method {译} 钼铼合金化学分析方法 第2部分：钼含量的测定 钼酸铅重量法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1563.1-2022 |
Methods for chemical analysis of molybdenum-rhenium alloys - Part 1: Determination of rhenium content - Inductively coupled plasma atomic emission spectrometry {译} 钼铼合金化学分析方法 第1部分：铼含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1562.4-2022 |
Methods for chemical analysis of tungsten copper alloys - Part 4: Determination of carbon content - High frequency combustion infrared absorption method {译} 钨铜合金化学分析方法 第4部分：碳含量的测定 高频燃烧红外吸收法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1562.3-2022 |
Methods for chemical analysis of tungsten-copper alloys - Part 3: Determination of cobalt, iron, nickel, zinc content - Inductively coupled plasma atomic emission spectrometry {译} 钨铜合金化学分析方法 第3部分：钴、铁、镍、锌含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1562.2-2022 |
Methods for chemical analysis of tungsten-copper alloys - Part 2: Determination of tungsten content - Cinchonine gravimetric method {译} 钨铜合金化学分析方法 第2部分：钨含量的测定 辛可宁重量法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1562.1-2022 |
Methods for chemical analysis of tungsten-copper alloys - Part 1: Determination of copper content - Iodometric method and inductively coupled plasma atomic emission spectrometry {译} 钨铜合金化学分析方法 第1部分：铜含量的测定 碘量法和电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1531-2022 |
Rhodium carbon chemical analysis method - Determination of rhodium content - Inductively coupled plasma atomic emission spectrometry {译} 铑炭化学分析方法 铑含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1075.13-2022 |
Methods for chemical analysis of vanadium-aluminum and molybdenum-aluminum master alloys - Part 13: Determination of iron, silicon, molybdenum and chromium content - Inductively coupled plasma atomic emission spectrometry {译} 钒铝、钼铝中间合金化学分析方法 第13部分：铁、硅、钼、铬含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1075.12-2022 |
Methods for chemical analysis of vanadium-aluminum and molybdenum-aluminum master alloys-Part 12: Determination of phosphorus content-Molybdenum blue spectrophotometric method {译} 钒铝、钼铝中间合金化学分析方法 第12部分：磷含量的测定 钼蓝分光光度法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1075.11-2022 |
Methods for chemical analysis of vanadium-aluminum and molybdenum-aluminum master alloys—Part 11: Determination of nitrogen content—Inert gas fusion thermal conductivity method {译} 钒铝、钼铝中间合金化学分析方法 第11部分：氮含量的测定 惰性气体熔融热导法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1075.10-2022 |
Methods for chemical analysis of vanadium-aluminum and molybdenum-aluminum master alloys - Part 10: Determination of sodium content - Flame atomic absorption spectrometry {译} 钒铝、钼铝中间合金化学分析方法 第10部分：钠含量的测定 火焰原子吸收光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1075.9-2022 |
Methods for chemical analysis of vanadium-aluminum and molybdenum-aluminum master alloys - Part 9: Determination of chlorine content - silver chloride spectrophotometric method {译} 钒铝、钼铝中间合金化学分析方法 第9部分：氯含量的测定 氯化银分光光度法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1537.1-2022 |
Methods for chemical analysis of lithium boron alloys - Part 1: Determination of lithium content - Lithium sulfate weighing method {译} 锂硼合金化学分析方法 第1部分：锂含量的测定 硫酸锂称量法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 483-2022 |
Copper and Copper Alloy Analysis Method X-ray Fluorescence Spectrometry (Wavelength Dispersion Type) {译} 铜及铜合金分析方法 X射线荧光光谱法 （波长色散型） |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 482-2022 |
Methods of analysis of copper and copper alloys - spark discharge atomic emission spectrometry {译} 铜及铜合金分析方法 火花放电原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1530-2022 |
High purity tin chemical analysis method - Determination of impurity element content - Glow discharge mass spectrometry {译} 高纯锡化学分析方法 杂质元素含量的测定 辉光放电质谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1525-2022 |
Nickel-platinum alloy chemical analysis method Determination of oxygen and nitrogen content Pulse-infrared absorption method and thermal conductivity detection method {译} 镍铂合金化学分析方法 氧和氮含量测定 脉冲-红外吸收法和热导检测法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| SY/T 5329-2022 |
Technical Requirements and Analysis Methods of Injection Water Quality Indexes in Clastic Reservoirs {译} 碎屑岩油藏注水水质指标技术要求及分析方法 |
China Oil & Gas Industry
Standards method analysis |
English PDF |
| SY/T 7662-2022 |
Laser Raman Spectroscopy Analysis Method for Solid Organic Matter and Inclusions {译} 固体有机质及包裹体激光拉曼光谱分析方法 |
China Oil & Gas Industry
Standards method analysis |
English PDF |
| SY/T 5777-2022 |
NMR analysis method of oil and water in crude oil and rock {译} 原油及岩石中油水核磁共振分析方法 |
China Oil & Gas Industry
Standards method analysis |
English PDF |
| SY/T 7661-2022 |
Pyrolysis analysis method of shale oil content {译} 泥页岩含油量热解分析方法 |
China Oil & Gas Industry
Standards method analysis |
English PDF |
| YB/T 075-2022 |
Analysis method of carbon and hydrogen elements of carbon fiber and its products {译} 炭纤维及其制品碳、氢元素分析方法 |
China Metallurgy Industry
Standards method analysis |
English PDF |
| YY/T 1858-2022 |
Artificial intelligence medical equipment, lung image auxiliary analysis software, algorithm performance testing method {译} 人工智能医疗器械 肺部影像辅助分析软件 算法性能测试方法 |
China Pharmaceutics Industry
Standards method analysis |
English PDF |
| SN/T 3168-2022 |
Methodology for Risk Analysis of Living Modified Organisms {译} 改性活生物体风险分析方法 |
China Import&Export Inspection Industry
Standards method analysis |
English PDF |
| YS/T 1171.13-2021 |
Methods for chemical analysis of recycled zinc raw materials - Part 13: Determination of thallium content - Inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry{译} {译} 再生锌原料化学分析方法 第13部分：铊含量的测定 电感耦合等离子体质谱法和电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1171.12-2021 |
Methods for chemical analysis of recycled zinc raw materials - Part 12: Determination of indium content - Flame atomic absorption spectrometry{译} {译} 再生锌原料化学分析方法 第12部分：铟含量的测定 火焰原子吸收光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1512.9-2021 |
Methods for chemical analysis of copper smelting smoke and dust - Part 9: Determination of antimony content - Flame atomic absorption spectrometry{译} {译} 铜冶炼烟尘化学分析方法 第9部分：锑含量的测定 火焰原子吸收光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1512.8-2021 |
Methods for chemical analysis of copper smelting fumes - Part 8: Determination of silver and gold content - Flame atomic absorption spectrometry and fire assay{译} {译} 铜冶炼烟尘化学分析方法 第8部分：银和金含量的测定 火焰原子吸收光谱法和火试金法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1512.7-2021 |
Methods for chemical analysis of copper smelting smoke and dust - Part 7: Determination of cadmium content - Flame atomic absorption spectrometry and titration{译} {译} 铜冶炼烟尘化学分析方法 第7部分：镉含量的测定 火焰原子吸收光谱法和滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1512.6-2021 |
Methods for chemical analysis of copper smelting smoke and dust - Part 6: Determination of indium content - Flame atomic absorption spectrometry{译} {译} 铜冶炼烟尘化学分析方法 第6部分：铟含量的测定 火焰原子吸收光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1512.5-2021 |
Methods for chemical analysis of copper smelting dust - Part 5: Determination of arsenic content - Ferrous ammonium sulfate titration method{译} {译} 铜冶炼烟尘化学分析方法 第5部分：砷含量的测定 硫酸亚铁铵滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1512.4-2021 |
Methods for chemical analysis of copper smelting smoke and dust - Part 4: Determination of bismuth content - Flame atomic absorption spectrometry and Na2EDTA titration{译} {译} 铜冶炼烟尘化学分析方法 第4部分：铋含量的测定 火焰原子吸收光谱法和Na2EDTA滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1512.3-2021 |
Methods for chemical analysis of copper smelting smoke and dust - Part 3: Determination of zinc content - Flame atomic absorption spectrometry and Na2EDTA titration{译} {译} 铜冶炼烟尘化学分析方法 第3部分：锌含量的测定 火焰原子吸收光谱法和Na2EDTA滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1512.2-2021 |
Methods for chemical analysis of copper smelting smoke and dust - Part 2: Determination of lead content - Flame atomic absorption spectrometry and Na2EDTA titration{译} {译} 铜冶炼烟尘化学分析方法 第2部分：铅含量的测定 火焰原子吸收光谱法和Na2EDTA滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1512.1-2021 |
Methods for chemical analysis of copper smelting smoke and dust - Part 1: Determination of copper content - Flame atomic absorption spectrometry and iodometric method{译} {译} 铜冶炼烟尘化学分析方法 第1部分：铜含量的测定 火焰原子吸收光谱法和碘量法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YB/T 4909.4-2021 |
Methods of analysis of calcium-based desulfurizers for pretreatment of iron and steel water - Part 4: Determination of active calcium oxide content - EDTA complexometric titration and acid-base titration {译} 炼钢铁水预处理用钙基脱硫剂分析方法 第4部分：活性氧化钙含量的测定 EDTA络合滴定法和酸碱滴定法 |
China Metallurgy Industry
Standards method analysis |
English PDF |
| YB/T 4909.3-2021 |
Methods of analysis of calcium-based desulfurizers for pretreatment of iron and steel water - Part 3: Determination of sulfur content - Combustion iodometric method {译} 炼钢铁水预处理用钙基脱硫剂分析方法 第3部分：硫含量的测定 燃烧碘量法 |
China Metallurgy Industry
Standards method analysis |
English PDF |
| YB/T 4909.2-2021 |
Methods of analysis of calcium-based desulfurizers for pretreatment of iron and steel water - Part 2: Determination of calcium fluoride content - Distillation-zirconium salt titration method {译} 炼钢铁水预处理用钙基脱硫剂分析方法 第2部分：氟化钙含量的测定 蒸馏-锆盐滴定法 |
China Metallurgy Industry
Standards method analysis |
English PDF |
| YS/T 739.4-2021 |
Methods for chemical analysis of aluminium electrolytes - Part 4: Determination of alumina content - Gravimetric method {译} 铝电解质化学分析方法 第4部分：氧化铝含量的测定 重量法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 581.15-2021 |
Methods for chemical analysis and determination of physical properties of aluminium fluoride - Part 15: Determination of free alumina content {译} 氟化铝化学分析方法和物理性能测定方法 第15部分：游离氧化铝含量的测定 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 581.3-2021 |
Aluminum fluoride chemical analysis method and physical property determination method? Part 3: Determination of fluorine content {译} 氟化铝化学分析方法和物理性能测定方法？第3部分：氟含量的测定 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 575.28-2021 |
Methods for chemical analysis of bauxite ores - Part 28: Determination of lithium oxide content - Flame atomic absorption spectrometry {译} 铝土矿石化学分析方法 第28部分：氧化锂含量的测定 火焰原子吸收光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 575.23-2021 |
Methods for chemical analysis of bauxite ores - Part 23: Determination of elemental content - X-ray fluorescence spectrometry {译} 铝土矿石化学分析方法 第23部分：元素含量的测定 X射线荧光光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 575.22-2021 |
Methods of chemical analysis of bauxite ores - Part 22: Determination of moisture content - gravimetric method {译} 铝土矿石化学分析方法 第22部分：湿存水含量的测定 重量法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 575.20-2021 |
Methods for chemical analysis of bauxite ores - Part 20: Preparation of pre-dried samples {译} 铝土矿石化学分析方法 第20部分：预先干燥试样的制备 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 575.19-2021 |
Methods for chemical analysis of bauxite ores - Part 19: Determination of loss on ignition - Gravimetric method {译} 铝土矿石化学分析方法 第19部分：灼减量的测定 重量法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 474-2021 |
High-purity gallium chemical analysis method Determination of trace elements Inductively coupled plasma mass spectrometry {译} 高纯镓化学分析方法 痕量元素的测定 电感耦合等离子体质谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1416-2021 |
Methods for chemical analysis of nickelous oxide - Determination of copper, iron, zinc, calcium, magnesium, sodium, cobalt, cadmium, manganese and sulfur content - Inductively coupled plasma atomic emission spectrometry {译} 氧化亚镍化学分析方法 铜、铁、锌、钙、镁、钠、钴、镉、锰和硫含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| JC/T 1088-2021 |
Chemical Analysis Method of Phosphorus Slag in Granulated Electric Furnace{译} {译} 粒化电炉磷渣化学分析方法 |
China Building Material Industry
Standards method analysis |
English PDF |
| JC/T 911-2021 |
Chemical analysis method of fluorite for building materials{译} {译} 建材用萤石化学分析方法 |
China Building Material Industry
Standards method analysis |
English PDF |
| JC/T 874-2021 |
Method for chemical analysis of siliceous raw materials for cement{译} {译} 水泥用硅质原料化学分析方法 |
China Building Material Industry
Standards method analysis |
English PDF |
| JC/T 850-2021 |
Method for chemical analysis of ferrous raw materials for cement{译} {译} 水泥用铁质原料化学分析方法 |
China Building Material Industry
Standards method analysis |
English PDF |
| JC/T 312-2021 |
Chemical analysis method of alumite expansive cement{译} {译} 明矾石膨胀水泥化学分析方法 |
China Building Material Industry
Standards method analysis |
English PDF |
| YS/T 3042-2021 |
Method for chemical analysis of cyanide solution - Determination of gold content {译} 氰化液化学分析方法 金量的测定 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| NB/T 10909-2021 |
Wind Energy Resource Analysis and Power Generation Calculation Method in Micro Site Selection {译} 微观选址中风能资源分析及发电量计算方法 |
China Energy Industry
Standards method analysis |
English PDF |
| YB/T 4928-2021 |
Microscopic analysis method of coke pore structure and raw coal lithofacies{译} {译} 焦炭孔隙构造及原料煤岩相 显微分析方法 |
China Metallurgy Industry
Standards method analysis |
English PDF |
| YS/T 1314.7-2021 |
Chemical analysis method of copper smelting silver slag? Part 7: Determination of antimony content? Cerium sulfate titration{译} {译} 铜冶炼分银渣化学分析方法？第7部分：锑含量的测定？硫酸铈滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1314.6-2021 |
Chemical analysis method of copper smelting silver slag? Part 6: Determination of copper content? iodometry{译} {译} 铜冶炼分银渣化学分析方法？第6部分：铜含量的测定？碘量法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1348.7-2021 |
Chemical analysis method of lead smelting silver slag? Part 7: Determination of Arsenic Content Inductively Coupled Plasma Atomic Emission Spectrometry{译} {译} 铅冶炼分银渣化学分析方法？第7部分：砷含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1502-2021 |
Chemical analysis method of ruthenium compounds Determination of platinum, palladium, rhodium, iridium, gold, silver, copper, iron, nickel, magnesium, manganese, lead, zinc, calcium, sodium content Inductively coupled plasma atomic emission spectrometry{译 {译} 钌化合物化学分析方法 铂、钯、铑、铱、金、银、铜、铁、镍、镁、锰、铅、锌、钙、钠含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1495-2021 |
High-purity rhodium chemical analysis method - Determination of impurity element content - Glow discharge mass spectrometry{译} {译} 高纯铑化学分析方法 杂质元素含量的测定 辉光放电质谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1494-2021 |
High-purity gold chemical analysis method - Determination of impurity element content - Glow discharge mass spectrometry{译} {译} 高纯金化学分析方法 杂质元素含量的测定 辉光放电质谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1493-2021 |
High-purity platinum chemical analysis method - Determination of impurity element content - Glow discharge mass spectrometry{译} {译} 高纯铂化学分析方法 杂质元素含量的测定 辉光放电质谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1489.8-2021 |
Methods for chemical analysis of cobalt-chromium-tungsten alloy powders-Part 8: Determination of oxygen content-Pulse heating inert gas fusion-infrared absorption method{译} {译} 钴铬钨系合金粉末化学分析方法 第8部分：氧含量的测定 脉冲加热惰气熔融-红外吸收法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1489.7-2021 |
Methods for chemical analysis of cobalt-chromium-tungsten alloy powders-Part 7: Determination of carbon content-High-frequency combustion infrared absorption method{译} {译} 钴铬钨系合金粉末化学分析方法 第7部分：碳含量的测定 高频燃烧红外吸收法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1489.6-2021 |
Methods for chemical analysis of cobalt-chromium-tungsten alloy powders-Part 6: Determination of iron and manganese content-Inductively coupled plasma atomic emission spectrometry{译} {译} 钴铬钨系合金粉末化学分析方法 第6部分：铁、锰含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1489.5-2021 |
Methods for chemical analysis of cobalt-chromium-tungsten alloy powders-Part 5: Determination of silicon content-Molybdenum blue spectrophotometry{译} {译} 钴铬钨系合金粉末化学分析方法 第5部分：硅含量的测定 钼蓝分光光度法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1489.4-2021 |
Methods for chemical analysis of cobalt-chromium-tungsten alloy powders-Part 4: Determination of nickel content-Diacetyl oxime spectrophotometry{译} {译} 钴铬钨系合金粉末化学分析方法 第4部分：镍含量的测定 丁二酮肟分光光度法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1489.3-2021 |
Methods for chemical analysis of cobalt-chromium-tungsten alloy powders - Part 3: Determination of tungsten content - Inductively coupled plasma atomic emission spectrometry{译} {译} 钴铬钨系合金粉末化学分析方法 第3部分：钨含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1489.2-2021 |
Methods for chemical analysis of cobalt-chromium-tungsten alloy powders - Part 2: Determination of chromium content - ammonium ferrous sulfate titration method{译} {译} 钴铬钨系合金粉末化学分析方法 第2部分：铬含量的测定 硫酸亚铁铵滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1489.1-2021 |
Methods for chemical analysis of cobalt chromium tungsten alloy powders - Part 1: Determination of cobalt content - Potentiometric titration method{译} {译} 钴铬钨系合金粉末化学分析方法 第1部分：钴含量的测定 电位滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 426.6-2021 |
Antimony beryllium pellet chemical analysis method? Part 6: Determination of beryllium oxide content? Inductively Coupled Plasma Atomic Emission Spectroscopy{译} {译} 锑铍芯块化学分析方法 ？第6部分:氧化铍含量的测定 ？电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 426.5-2021 |
Antimony beryllium pellet chemical analysis method? Part 5: Determination of silicon content? Inductively Coupled Plasma Atomic Emission Spectroscopy{译} {译} 锑铍芯块化学分析方法 ？第5部分:硅含量的测定 ？电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1476-2021 |
Chemical analysis method of zircon sand? Determination of barium content ? Inductively Coupled Plasma Atomic Emission Spectroscopy{译} {译} 锆英砂化学分析方法 ？钡含量的测定 ？电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1473-2021 |
High-purity molybdenum chemical analysis method? Determination of trace impurity elements ? glow discharge mass spectrometry{译} {译} 高纯钼化学分析方法 ？痕量杂质元素的测定 ？辉光放电质谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1472.6-2021 |
Chemical analysis method of lithium-rich manganese-based cathode materials? Part 6: Determination of sulfate content? ion chromatography{译} {译} 富锂锰基正极材料化学分析方法？ 第6部分：硫酸根含量的测定？ 离子色谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1472.5-2021 |
Chemical analysis method of lithium-rich manganese-based cathode materials? Part 5: Determination of chlorine content Silver chloride turbidimetric method{译} {译} 富锂锰基正极材料化学分析方法？ 第5部分：氯含量的测定 氯化银比浊法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1472.4-2021 |
Chemical analysis method of lithium-rich manganese-based cathode materials? Part 4: Determination of lithium, nickel, cobalt, sodium, potassium, copper, calcium, iron, magnesium, zinc, aluminum, silicon content? Inductively Coupled Plasma Atomic Emission {译} 富锂锰基正极材料化学分析方法？ 第4部分：锂、镍、钴、钠、钾、铜、钙、铁、镁、锌、铝、硅含量的测定？ 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1472.3-2021 |
Chemical analysis method of lithium-rich manganese-based cathode materials? Part 3: Determination of nickel content - dimethylglyoxime gravimetric method{译} {译} 富锂锰基正极材料化学分析方法？ 第3部分：镍含量的测定 丁二酮肟重量法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1472.2-2021 |
Chemical analysis method of lithium-rich manganese-based cathode materials? Part 2: Determination of cobalt content Potentiometric titration{译} {译} 富锂锰基正极材料化学分析方法？ 第2部分：钴含量的测定 电位滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1472.1-2021 |
Chemical analysis method of lithium-rich manganese-based cathode materials? Part 1: Determination of manganese content Potentiometric titration{译} {译} 富锂锰基正极材料化学分析方法？ 第1部分：锰含量的测定 电位滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1467.12-2021 |
Methods for chemical analysis of hafnium - Part 12: Determination of trace impurity elements{译} {译} 铪化学分析方法 第12部分：痕量杂质元素的测定 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1467.11-2021 |
Methods for chemical analysis of hafnium - Part 11: Determination of carbon content{译} {译} 铪化学分析方法 第11部分：碳量的测定 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1467.10-2021 |
Methods for chemical analysis of hafnium - Part 10: Determination of oxygen and nitrogen content{译} {译} 铪化学分析方法 第10部分：氧量、氮量的测定 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1467.9-2021 |
Methods for chemical analysis of hafnium - Part 9: Determination of hydrogen content{译} {译} 铪化学分析方法 第9部分：氢量的测定 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1467.8-2021 |
Methods for chemical analysis of hafnium - Part 8: Determination of sodium content{译} {译} 铪化学分析方法 第8部分：钠量的测定 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1467.7-2021 |
Methods for chemical analysis of hafnium - Part 7: Determination of silicon content{译} {译} 铪化学分析方法 第7部分：硅量的测定 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1467.6-2021 |
Methods for chemical analysis of hafnium - Part 6: Determination of phosphorus content{译} {译} 铪化学分析方法 第6部分：磷量的测定 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1467.5-2021 |
Methods for chemical analysis of hafnium - Part 5: Determination of cadmium{译} {译} 铪化学分析方法 第5部分：镉量的测定 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1467.4-2021 |
Methods for chemical analysis of hafnium - Part 4: Determination of chlorine content{译} {译} 铪化学分析方法 第4部分：氯量的测定 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1467.3-2021 |
Methods for chemical analysis of hafnium - Part 3: Determination of boron content{译} {译} 铪化学分析方法 第3部分：硼量的测定 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1467.2-2021 |
Methods for chemical analysis of hafnium - Part 2: Determination of the amount of uranium{译} {译} 铪化学分析方法 第2部分：铀量的测定 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1467.1-2021 |
Methods for chemical analysis of hafnium - Part 1: Determination of lead content{译} {译} 铪化学分析方法 第1部分：铅量的测定 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1466-2021 |
Sampling method for chemical composition analysis of zirconium and zirconium alloys{译} {译} 锆及锆合金化学成分分析取制样方法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1464-2021 |
Methods for chemical analysis of niobium-tungsten alloys - Determination of tungsten, molybdenum, zirconium, tantalum, silicon, iron, aluminum, titanium and copper{译} {译} 铌钨合金化学分析方法 钨、钼、锆、钽、硅、铁、铝、钛、铜量的测定 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 461.11-2021 |
Methods for chemical analysis of mixed lead-zinc concentrates - Part 11: Determination of arsenic, bismuth, cadmium, cobalt, copper, nickel and antimony content - Inductively coupled plasma atomic emission spectrometry{译} {译} 混合铅锌精矿化学分析方法 第11部分：砷、铋、镉、钴、铜、镍和锑含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1345.7-2021 |
Chemical analysis methods for high bismuth and lead - Part 7: Determination of copper, iron, nickel, cadmium, arsenic, antimony and bismuth content - Inductively coupled plasma atomic emission spectrometry{译} {译} 高铋铅化学分析方法 第7部分：铜、铁、镍、镉、砷、锑、铋含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1462.5-2021 |
Methods for chemical analysis of crude tin - Part 5: Determination of antimony content - Flame atomic absorption spectrometry and cerium sulfate titration{译} {译} 粗锡化学分析方法 第5部分：锑含量的测定 火焰原子吸收光谱法和硫酸铈滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1462.4-2021 |
Methods for chemical analysis of crude tin - Part 4: Determination of bismuth content - Flame atomic absorption spectrometry and Na2EDTA titration{译} {译} 粗锡化学分析方法 第4部分：铋含量的测定 火焰原子吸收光谱法和Na2EDTA滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1462.3-2021 |
Methods for chemical analysis of crude tin - Part 3: Determination of copper content - Flame atomic absorption spectrometry and iodometry{译} {译} 粗锡化学分析方法 第3部分：铜含量的测定 火焰原子吸收光谱法和碘量法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1462.2-2021 |
Methods for chemical analysis of crude tin - Part 2: Determination of lead content - Flame atomic absorption spectrometry and Na2EDTA titration{译} {译} 粗锡化学分析方法 第2部分：铅含量的测定 火焰原子吸收光谱法和Na2EDTA滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1462.1-2021 |
Methods for chemical analysis of crude tin - Part 1: Determination of tin content - Potassium iodate titration method{译} {译} 粗锡化学分析方法 第1部分：锡含量的测定 碘酸钾滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1461-2021 |
Bismuth yellow chemical analysis method? Determination of bismuth content by Na2EDTA volumetric method{译} {译} 铋黄化学分析方法？铋含量的测定 Na2EDTA容量法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 96-2021 |
Analysis and sampling method of gold and silver in bulk flotation copper concentrate{译} {译} 散装浮选铜精矿中金、银分析取制样方法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1161.4-2021 |
Methods of analysis for pseudo-boehmite - Part 4: Determination of sodium oxide content{译} {译} 拟薄水铝石分析方法 第4部分：氧化钠含量的测定 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1445.5-2021 |
Methods for chemical analysis of nickel-cobalt-aluminum three-element composite hydroxides-Part 5: Determination of sulfate ion content-Barium sulfate turbidimetric method{译} {译} 镍钴铝三元素复合氢氧化物化学分析方法 第5部分：硫酸根离子含量的测定 硫酸钡比浊法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1445.4-2021 |
Methods for chemical analysis of nickel-cobalt-aluminum tri-element composite hydroxides-Part 4: Determination of chloride ion content-Silver chloride turbidimetric method{译} {译} 镍钴铝三元素复合氢氧化物化学分析方法 第4部分：氯离子含量的测定 氯化银比浊法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1445.3-2021 |
Methods for chemical analysis of nickel-cobalt-aluminum three-element composite hydroxides-Part 3: Determination of aluminum, copper, iron, zinc, calcium, magnesium, sodium and manganese content-Inductively coupled plasma atomic emission spectrometry{译} {译} 镍钴铝三元素复合氢氧化物化学分析方法 第3部分：铝、铜、铁、锌、钙、镁、钠、锰含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1445.2-2021 |
Methods for chemical analysis of nickel-cobalt-aluminum tri-element composite hydroxides-Part 2: Determination of cobalt content Potentiometric titration method{译} {译} 镍钴铝三元素复合氢氧化物化学分析方法 第2部分：钴含量的测定 电位滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1445.1-2021 |
Methods for chemical analysis of nickel-cobalt-aluminum tri-element composite hydroxides-Part 1: Determination of nickel content-Diacetyl oxime gravimetric method{译} {译} 镍钴铝三元素复合氢氧化物化学分析方法 第1部分：镍含量的测定 丁二酮肟重量法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| HG/T 5910-2021 |
Analysis method of chemical composition of bimetal supported polyether polyol synthesis catalyst{译} {译} 双金属负载型聚醚多元醇合成催化剂化学成分分析方法 |
China Chemistry Industry
Standards method analysis |
English PDF |
| HG/T 5909-2021 |
Analysis method of chemical composition of meropenem synthesis catalyst{译} {译} 美罗培南合成催化剂化学成分分析方法 |
China Chemistry Industry
Standards method analysis |
English PDF |
| YS/T 1509.3-2021 |
Chemical analysis method of silicon carbon composite anode material? Part 3: Determination of iron, nickel, zirconium, calcium, lead, aluminium, hafnium content? Inductively Coupled Plasma Atomic Emission Spectroscopy{译} {译} 硅碳复合负极材料化学分析方法？第3部分：铁、镍、锆、钙、铅、铝、铪含量的测定？电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1509.2-2021 |
Methods for chemical analysis of silicon-carbon composite anode materials - Part 2: Determination of carbon content - High frequency heating infrared absorption method{译} {译} 硅碳复合负极材料化学分析方法 第2部分：碳含量的测定 高频加热红外吸收法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1509.1-2021 |
Methods for chemical analysis of silicon-carbon composite anode materials - Part 1: Determination of silicon content - gravimetric and spectrophotometric methods{译} {译} 硅碳复合负极材料化学分析方法 第1部分：硅含量的测定 重量法和分光光度法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1506-2021 |
High-purity iridium chemical analysis method? Determination of impurity element content? glow discharge mass spectrometry{译} {译} 高纯铱化学分析方法？杂质元素含量的测定？辉光放电质谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1505-2021 |
High-purity ruthenium chemical analysis method? Determination of impurity element content? glow discharge mass spectrometry{译} {译} 高纯钌化学分析方法？杂质元素含量的测定？辉光放电质谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1504-2021 |
High-purity palladium chemical analysis method? Determination of impurity element content? glow discharge mass spectrometry{译} {译} 高纯钯化学分析方法？杂质元素含量的测定？辉光放电质谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 445.18-2021 |
What is the chemical analysis method of silver concentrate? Part 18: Determination of iron content? Na2EDTA titration{译} {译} 银精矿化学分析方法？第18部分：铁含量的测定？Na2EDTA 滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 445.17-2021 |
What is the chemical analysis method of silver concentrate? Part 17: Determination of silica content? Molybdenum Blue Spectrophotometry{译} {译} 银精矿化学分析方法？第17部分：二氧化硅含量的测定？钼蓝分光光度法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1314.8-2021 |
Chemical analysis method of copper smelting silver slag? Part 8: Determination of bismuth content? Na2EDTA titration{译} {译} 铜冶炼分银渣化学分析方法？第8部分：铋含量的测定？Na2EDTA滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| SN/T 5290-2021 |
Quantitative chemical analysis of the mixture of feather down and polyester fiber for import and export - Sodium hypochlorite method{译} {译} 进出口羽毛绒与聚酯纤维混合物成分定量化学分析 次氯酸钠法 |
China Import&Export Inspection Industry
Standards method analysis |
English PDF |
| SY/T 5162-2021 |
Scanning Electron Microscope Analysis Method of Rock Samples{译} {译} 岩石样品扫描电子显微镜分析方法 |
China Oil & Gas Industry
Standards method analysis |
English PDF |
| SY/T 5121-2021 |
Infrared spectroscopy analysis method of organic matter in rock and crude oil{译} {译} 岩石中有机质及原油红外光谱分析方法 |
China Oil & Gas Industry
Standards method analysis |
English PDF |
| SN/T 5239-2020 |
Import and export of textiles Quantitative analysis of fibers Microprojector method Kapok/cotton blended products? {译} 进出口纺织品 纤维定量分析 显微投影仪法 木棉/棉混纺产品？ |
China Import&Export Inspection Industry
Standards method analysis |
English PDF |
| SN/T 3896.8-2020 |
Textiles for import and export - Quantitative analysis of fibers - Near infrared method - Part 8: Mixtures of cotton and polyamide {译} 进出口纺织品 纤维定量分析 近红外法 第8部分：棉与聚酰胺的混合物 |
China Import&Export Inspection Industry
Standards method analysis |
English PDF |
| SN/T 3896.7-2020 |
Textiles for import and export - Quantitative analysis of fibers - Near infrared method - Part 7: Mixtures of polyester fibers and polyamide fibers {译} 进出口纺织品 纤维定量分析 近红外法 第7部分：聚酯纤维与聚酰胺纤维的混合物 |
China Import&Export Inspection Industry
Standards method analysis |
English PDF |
| MT/T 1183-2020 |
Slope stability analysis and rock movement monitoring method in open pit mine {译} 露天矿边坡稳定性分析及岩移监测方法 |
China Coal Industry
Standards method analysis |
English PDF |
| YY/T 1714-2020 |
Standard method for finite element analysis of non-assembled metal hip femoral stems {译} 非组合式金属髋关节股骨柄有限元分析标准方法 |
China Pharmaceutics Industry
Standards method analysis |
English PDF |
| YS/T 1348.6-2020 |
Methods for chemical analysis of lead smelting silver slag - Part 6: Determination of lead, copper, antimony and bismuth content - Inductively coupled plasma atomic emission spectrometry {译} 铅冶炼分银渣化学分析方法 第6部分：铅、铜、锑和铋含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1348.5-2020 |
Methods for chemical analysis of lead smelting silver slag - Part 5: Determination of bismuth content - Flame atomic absorption spectrometry and Na2EDTA titration {译} 铅冶炼分银渣化学分析方法 第5部分：铋含量的测定 火焰原子吸收光谱法和Na2EDTA滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1348.4-2020 |
Methods for chemical analysis of lead smelting silver slag - Part 4: Determination of antimony content - Flame atomic absorption spectrometry and cerium sulfate titration {译} 铅冶炼分银渣化学分析方法 第4部分：锑含量的测定 火焰原子吸收光谱法和硫酸铈滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1348.3-2020 |
Methods for chemical analysis of lead smelting silver slag - Part 3: Determination of copper content - Flame atomic absorption spectrometry and iodometric method {译} 铅冶炼分银渣化学分析方法 第3部分：铜含量的测定 火焰原子吸收光谱法和碘量法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1348.2-2020 |
Methods for chemical analysis of lead smelting silver slag - Part 2: Determination of lead content - Flame atomic absorption spectrometry and Na2EDTA titration {译} 铅冶炼分银渣化学分析方法 第2部分：铅含量的测定 火焰原子吸收光谱法和Na2EDTA滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1348.1-2020 |
Methods for chemical analysis of silver slag from lead smelting - Part 1: Determination of gold and silver content - Fire assay method {译} 铅冶炼分银渣化学分析方法 第1部分：金和银含量的测定 火试金法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1347-2020 |
Methods for chemical analysis of high-purity hafnium-Determination of trace impurity elements-Glow discharge mass spectrometry {译} 高纯铪化学分析方法 痕量杂质元素含量的测定 辉光放电质谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 833-2020 |
Ammonium rhenate chemical analysis method Determination of beryllium, magnesium, aluminum, potassium, calcium, titanium, chromium, manganese, iron, cobalt, copper, zinc, molybdenum, lead, tungsten, sodium, tin, nickel, silicon content Inductively coupled {译} 铼酸铵化学分析方法 铍、镁、铝、钾、钙、钛、铬、锰、铁、钴、铜、锌、钼、铅、钨、钠、锡、镍、硅量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1047.13-2020 |
Methods for chemical analysis of copper magnetite - Part 13: Determination of mercury content - Direct determination by solid injection and cold atomic absorption spectrometry {译} 铜磁铁矿化学分析方法 第13部分：汞含量的测定 固体进样直接测定法和冷原子吸收光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1047.12-2020 |
Methods for chemical analysis of copper magnetite - Part 12: Determination of sulfur content - Inductively coupled plasma atomic emission spectrometry {译} 铜磁铁矿化学分析方法 第12部分：硫含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1346-2020 |
Method for chemical analysis of copper and arsenic filter cakes - Determination of rhenium content - Inductively coupled plasma atomic emission spectrometry {译} 铜砷滤饼化学分析方法 铼含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 341.5-2020 |
Methods for chemical analysis of nickel concentrates - Part 5: Determination of copper, lead, zinc, magnesium, cadmium and arsenic content - Inductively coupled plasma atomic emission spectrometry {译} 镍精矿化学分析方法 第5部分： 铜、铅、锌、镁、镉和砷含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1345.6-2020 |
Chemical analysis methods for high bismuth and lead - Part 6: Determination of tin content - Potassium iodate titration method {译} 高铋铅化学分析方法 第6部分：锡含量的测定 碘酸钾滴定法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| YS/T 1345.5-2020 |
Methods for chemical analysis of high bismuth and lead - Part 5: Determination of copper content - Flame atomic absorption spectrometry {译} 高铋铅化学分析方法 第5部分：铜含量的测定 火焰原子吸收光谱法 |
China Non-ferrous Metal Industry
Standards method analysis |
English PDF |
| Find out:432Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
