Cart:
Keyword:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| JB/T 14414-2023 |
Internal combustion engine austempered bainite cylinder liner metallographic examination {译} 内燃机 等温淬火贝氏体气缸套 金相检验 |
China Machinery Industry
Standards All metal |
 English PDF |
| HB 8423.6-2017 |
Metal material grade identification method Part 6: Identification of iron-nickel-based high-temperature alloy grade by looking at the spectrum {译} 金属材料牌号鉴别方法 第6部分：看谱法鉴别铁镍基高温 合金牌号 |
China Aviation Industry
Standards All metal |
English PDF |
| HB 8423.3-2017 |
Methods for identification of metal material grades Part 3: Identification of alloy structural steel grades by looking at spectra {译} 金属材料牌号鉴别方法 第3部分：看谱法鉴别合金结构钢牌号 |
China Aviation Industry
Standards All metal |
English PDF |
| HB 7475-2017 |
Qualification and certification of aviation non-metallic performance testing personnel {译} 航空非金属性能检测人员的资格鉴定与认证 |
China Aviation Industry
Standards All metal |
English PDF |
| HB 7477-2014(2017) |
Qualification and certification of aviation physics and metallurgical inspection personnel {译} 航空物理冶金检测人员的资格鉴定与认证 |
China Aviation Industry
Standards All metal |
English PDF |
| HB 8423.2-2014(2017) |
Methods for identifying metal material brands Part 2: Identifying titanium alloy brands by looking at spectra {译} 金属材料牌号鉴别方法 第2部分：看谱法鉴别钛合金牌号 |
China Aviation Industry
Standards All metal |
English PDF |
| HB 8423.1-2014(2017) |
Identification method of metal material brands Part 1: Identification of aluminum alloy brands by looking at the spectrum {译} 金属材料牌号鉴别方法 第1部分：看谱法鉴别铝合金牌号 |
China Aviation Industry
Standards All metal |
English PDF |
| HB 6577-2014(2017) |
Test method for smoke density of non-metallic materials inside civil aircraft cabins {译} 民用飞机机舱内部非金属材料烟密度试验方法 |
China Aviation Industry
Standards All metal |
English PDF |
| HB 5470-2014(2017) |
Combustion performance requirements for non-metallic materials inside civil aircraft cabins HB 5470-1991 {译} 民用飞机机舱内部非金属材料燃烧性能要求 |
China Aviation Industry
Standards All metal |
English PDF |
| HB 5469-2014(2017) |
Combustion test method for non-metallic materials inside civil aircraft cabin HB 5469-1991 {译} 民用飞机机舱内部非金属材料燃烧试验方法 |
China Aviation Industry
Standards All metal |
English PDF |
| HG/T 3731-2023 |
Non-metallic chemical equipment Glass fiber reinforced polyvinyl chloride composite pipes and fittings {译} 非金属化工设备 玻璃纤 维增强聚氯乙烯复合管 和管件 |
China Chemistry Industry
Standards All metal |
English PDF |
| HG/T 2643-2023 |
Non-metallic chemical equipment Acrylonitrile-butadiene-styrene, polyvinyl chloride, homopolypropylene, polyvinylidene fluoride and glass fiber reinforced polypropylene diaphragm valves {译} 非金属化工设备 丙烯腈-丁二烯-苯乙烯、聚氯乙烯、均聚聚丙烯、聚偏氟乙烯和玻璃纤维增强聚丙烯隔膜阀 |
China Chemistry Industry
Standards All metal |
English PDF |
| HG/T 2737-2023 |
Non-metallic chemical equipment Acrylonitrile-butadiene-styrene, PVC, homopolypropylene, polyvinylidene fluoride and glass fiber reinforced polypropylene ball valves {译} 非金属化工设备 丙烯腈-丁二烯-苯乙烯、聚氯乙 烯、均聚聚丙烯、聚偏氟乙烯和玻璃纤维增强聚丙烯球阀 |
China Chemistry Industry
Standards All metal |
English PDF |
| HB 7399-2022 |
Test method for heat release rate of non-metallic materials inside civil aircraft cabins {译} 民用飞机机舱内部非金属材料热释放速率试验方法 |
China Aviation Industry
Standards All metal |
English PDF |
| HB 7066-2022 |
Method for determination of toxic gases produced by combustion of non-metallic materials inside civil aircraft cabins {译} 民用飞机机舱内部非金属材料燃烧产生毒性气体测定方法 |
China Aviation Industry
Standards All metal |
English PDF |
| YY/T 0512-2009 |
Surgical implants - Metallic materials - Microstructural classification of α+β titanium alloy rods {译} 外科植入物 金属材料 α+β钛合金棒材显微组织的分类 |
China Pharmaceutics Industry
Standards All metal |
English PDF |
| SN/T 5496-2023 |
Evaluation of Fatigue Properties of Metallic Materials Nonlinear Ultrasonic Method {译} 金属材料疲劳特性的评价 非线性超声法 |
China Import&Export Inspection Industry
Standards All metal |
English PDF |
| JC/T 2713-2022 |
Inorganic non-metallic material superfine powder vertical roller mill {译} 无机非金属材料超细粉体立式辊磨机 |
China Building Material Industry
Standards All metal |
English PDF |
| YY 0605.9—2015 |
Surgical implants - Metallic materials - Part 9: Wrought high nitrogen stainless steel {译} 外科植入物 金属材料 第9部分：锻造高氮不锈钢 |
China Pharmaceutics Industry
Standards All metal |
English PDF |
| XB/T 702-2022 |
Electrochemical Performance Test of Rare Earth Hydrogen Storage Alloy Powder for Metal Hydride-Nickel Battery Negative Electrode Three-electrode System Test Method {译} 金属氢化物-镍电池负极用稀土系贮氢合金粉电化学性能的测试 三电极体系测试法 |
China Rare Earth Industry
Standards All metal |
English PDF |
| YS/T 1532-2022 |
Metal Injection Molding of Titanium and Titanium Alloy Shaped Parts {译} 金属注射成形钛及钛合金异形件 |
China Non-ferrous Metal Industry
Standards All metal |
English PDF |
| HG/T 6136-2022 |
Non-metallic chemical equipment Basalt fiber reinforced plastic storage tanks {译} 非金属化工设备 玄武岩纤维增强塑料贮罐 |
China Chemistry Industry
Standards All metal |
English PDF |
| HG/T 6135-2022 |
Non-metallic chemical equipment Basalt fiber reinforced plastic pipes and fittings {译} 非金属化工设备 玄武岩纤维增强塑料管道及管件 |
China Chemistry Industry
Standards All metal |
English PDF |
| SY/T 6662.1-2022 |
Non-metallic composite pipes for the oil and gas industry - Part 1: Steel skeleton reinforced polyethylene composite pipes {译} 石油天然气工业用非金属复合管 第1部分：钢骨架增强聚乙烯复合管 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| YB/T 6072-2022 |
Technical specification for metallurgical dust sludge treatment by rotary hearth furnace {译} 转底炉处理冶金尘泥技术规范 |
China Metallurgy Industry
Standards All metal |
English PDF |
| YB/T 6060-2022 |
Metallurgical lime energy consumption limit per unit product {译} 冶金石灰单位产品能源消耗限额 |
China Metallurgy Industry
Standards All metal |
English PDF |
| YB/T 5293-2022 |
Test method for upsetting of metallic materials {译} 金属材料顶锻试验方法 |
China Metallurgy Industry
Standards All metal |
English PDF |
| YB/T 6034-2022 |
Technical specification for metallurgical rolling mill bearing seat repair {译} 冶金轧机轴承座修复技术规范 |
China Metallurgy Industry
Standards All metal |
English PDF |
| YB/T 6033-2022 |
Technical specification for on-line repair of metallurgical rolling mill stand {译} 冶金轧机机架在线修复技术规范 |
China Metallurgy Industry
Standards All metal |
English PDF |
| YB/T 6050-2022 |
Technical specifications for automatic sampling control system for metallurgical coking, sintering and pelletizing {译} 冶金焦化、烧结、球团配料自动采样控制系统技术规范 |
China Metallurgy Industry
Standards All metal |
English PDF |
| YB/T 6042-2022 |
Technical specifications for the application of lubricating oil (grease) additives for metallurgy {译} 冶金用润滑油（脂）添加剂应用技术规范 |
China Metallurgy Industry
Standards All metal |
English PDF |
| YB/T 6039-2022 |
Determination method of green burning rate and burning rate of metallurgical lime {译} 冶金石灰生烧率和过烧率的测定方法 |
China Metallurgy Industry
Standards All metal |
English PDF |
| JB/T 14396-2022 |
Technical specifications for powder metallurgy sliders for automotive seat adjustment mechanisms {译} 汽车座椅调节机构用粉末冶金滑块技术规范 |
China Machinery Industry
Standards All metal |
English PDF |
| JB/T 14395-2022 |
Technical specifications for powder metallurgy inner and outer rotors for automotive oil pumps {译} 汽车机油泵用粉末冶金内外转子 技术规范 |
China Machinery Industry
Standards All metal |
English PDF |
| JB/T 10767-2022 |
Technical specifications for copper-based wet powder metallurgy friction plates for loaders {译} 装载机铜基湿式粉末冶金摩擦片 技术规范 |
China Machinery Industry
Standards All metal |
English PDF |
| QB/T 5709-2022 |
Biaxially oriented polyester film for metal lamination {译} 金属复合用双向拉伸聚酯薄膜 |
China Light Industry Industry
Standards All metal |
English PDF |
| YD/T 1181.7-2022 |
Characteristics of non-metallic strength members for optical fiber cables - Part 7: Fiber reinforced plastic flexible rods {译} 光缆用非金属加强件的特性 第7部分：纤维增强塑料柔性杆 |
China Telecommunication Industry
Standards All metal |
English PDF |
| JB/T 14246-2022 |
Metallurgical Heavy Duty Diaphragm Coupling {译} 冶金重载膜片联轴器 |
China Machinery Industry
Standards All metal |
English PDF |
| JB/T 14679-2022 |
Technical specifications for powder metallurgy crankshaft bearing caps for automobile engines {译} 汽车发动机用粉末冶金曲轴轴承盖 技术规范 |
China Machinery Industry
Standards All metal |
English PDF |
| JB/T 14678-2022 |
Technical specifications for powder metallurgy toothed belt pulleys for automobile engines {译} 汽车发动机用粉末冶金齿形皮带轮 技术规范 |
China Machinery Industry
Standards All metal |
English PDF |
| JB/T 14677-2022 |
Technical specifications for powder metallurgy high manganese non-magnetic steel balance weights for air-conditioning compressors {译} 空调压缩机用粉末冶金高锰无磁钢平衡块技术规范 |
China Machinery Industry
Standards All metal |
English PDF |
| YY/T 1802-2021 |
Additively manufactured medical products - Evaluation method for metal ion precipitation of 3D printed titanium alloy implants {译} 增材制造医疗产品 3D打印钛合金植入物金属离子析出评价方法 |
China Pharmaceutics Industry
Standards All metal |
English PDF |
| YS/T 1514-2021 |
Specification for steam purification and reuse of zinc hydrometallurgy{译} {译} 锌湿法冶炼蒸汽净化及回用规范 |
China Non-ferrous Metal Industry
Standards All metal |
English PDF |
| YB/T 4920-2021 |
Specification for installation of metallurgical equipment without backing plate {译} 冶金设备无垫板安装规范 |
China Metallurgy Industry
Standards All metal |
English PDF |
| YB/T 4960-2021 |
Technical specification for groundwater extraction from polluted sites in metallurgical enterprises {译} 冶金企业污染场地地下水抽提技术规范 |
China Metallurgy Industry
Standards All metal |
English PDF |
| YB/T 4959-2021 |
Technical specification for cemented backfill of metallurgical mine tailings {译} 冶金矿山尾矿胶结充填技术规范 |
China Metallurgy Industry
Standards All metal |
English PDF |
| XB/T 517-2021 |
Rare earth pyrometallurgical recycling material{译} {译} 稀土火法冶炼回收料 |
China Rare Earth Industry
Standards All metal |
English PDF |
| XB/T 805-2021 |
Green Design Product Evaluation Technical Specifications Rare Earth Pyrometallurgical Products{译} {译} 绿色设计产品评价技术规范 稀土火法冶炼产品 |
China Rare Earth Industry
Standards All metal |
English PDF |
| YB/T 050-2021 |
MHB gearbox for metallurgical equipment {译} 冶金设备用MHB齿轮箱 |
China Metallurgy Industry
Standards All metal |
English PDF |
| YB/T 062-2021 |
Metallurgical Industry Furnace Burner Specifications {译} 冶金工业炉燃烧器技术条件 |
China Metallurgy Industry
Standards All metal |
English PDF |
| YB/T 160-2021 |
Metallurgical industry furnace burner performance test method {译} 冶金工业炉燃烧器性能试验方法 |
China Metallurgy Industry
Standards All metal |
English PDF |
| YB/T 4122.2-2021 |
Microcomputer Relay Protection for Metallurgical Enterprises Part 2: Inspection Regulations {译} 冶金企业微机继电保护第2部分：检验规程 |
China Metallurgy Industry
Standards All metal |
English PDF |
| YB/T 4122.1-2021 |
Microcomputer Relay Protection for Metallurgical Enterprises Part 1: Operational Technical Management Regulations {译} 冶金企业微机继电保护第1部分：运行技术管理规程 |
China Metallurgy Industry
Standards All metal |
English PDF |
| YB/T 028-2021 |
Hydraulic cylinder for metallurgical equipment {译} 冶金设备用液压缸 |
China Metallurgy Industry
Standards All metal |
English PDF |
| YB/T 4914-2021 |
General technical conditions for remanufacturing of metallurgical roll surfacing {译} 冶金轧辊堆焊再制造通用技术条件 |
China Metallurgy Industry
Standards All metal |
English PDF |
| YB/T 4907-2021 |
Ferromanganese, manganese-silicon alloys and metal manganese - Determination of manganese, silicon, iron and phosphorus content - Wavelength dispersive X-ray fluorescence spectrometry {译} 锰铁、锰硅合金和金属锰 锰、硅、铁、磷含量的测定 波长色散X射线荧光光谱法 |
China Metallurgy Industry
Standards All metal |
English PDF |
| YS/T 1415-2021 |
Determination of acidity in hydrometallurgical zinc leachate - complexation masking - neutralization titration method {译} 湿法炼锌浸出液中酸度的测定 络合掩蔽—中和滴定法 |
China Non-ferrous Metal Industry
Standards All metal |
English PDF |
| YS/T 1410-2021 |
Technical specification for waste heat recovery and utilization of heavy non-ferrous metallurgical furnaces and kilns {译} 重有色冶金炉窑余热回收利用技术规范 |
China Non-ferrous Metal Industry
Standards All metal |
English PDF |
| JC/T 2009-2021 |
Non-metallic additives for friction materials{译} {译} 摩擦材料用非金属添加物 |
China Building Material Industry
Standards All metal |
English PDF |
| YD/T 1181.2-2021 |
Characteristics of non-metallic strength members for optical cables - Part 2: Aramid yarns {译} 光缆用非金属加强件的特性 第2部分：芳纶纱 |
China Telecommunication Industry
Standards All metal |
English PDF |
| TB/T 3139-2021 |
Limits of non-metallic materials and indoor air harmful substances for rolling stock {译} 机车车辆非金属材料及室内空气有害物质限量 |
China Railway Transport Industry
Standards All metal |
English PDF |
| YS/T 3041.3-2021 |
Calibration method for determination of silver in metallic ores, concentrates and corresponding materials by fire assay method - Part 3: Slag recovery and ash blowing calibration method {译} 火试金法测定金属矿石、精 矿及相应物料中银量的校正 方法 第 3 部分：熔渣回收 和灰吹校准法 |
China Non-ferrous Metal Industry
Standards All metal |
English PDF |
| YS/T 3041.2-2021 |
Fire assay method for determination of silver content in metallic ores, concentrates and related materials--Part 2: Slag and ash recovery method {译} 火试金法测定金属矿石、精 矿及相应物料中银量的校正 方法 第 2 部分：熔渣和灰 皿回收法 |
China Non-ferrous Metal Industry
Standards All metal |
English PDF |
| YB/T 4936-2021 |
Determination of content of ferromanganese, manganese silicon alloy, metal manganese and copper dicyclohexanone oxalyl dihydrazone spectrophotometry and flame atomic absorption spectrometry{译} {译} 锰铁、锰硅合金、金属锰 铜含量的测定 双环己酮草酰二腙分光光度法和火焰原子吸收光谱法 |
China Metallurgy Industry
Standards All metal |
English PDF |
| YB/T 4935-2021 |
Determination of ferromanganese, manganese-silicon alloy, metal manganese-aluminum content by chrome azure S spectrophotometry{译} {译} 锰铁、锰硅合金、金属锰 铝含量的测定 铬天青S分光光度法 |
China Metallurgy Industry
Standards All metal |
English PDF |
| YS/T 1501-2021 |
Method for metallographic examination of cuprous oxide of copper-containing precious metal materials{译} {译} 含铜贵金属材料氧化亚铜金相检验方法 |
China Non-ferrous Metal Industry
Standards All metal |
English PDF |
| YS/T 1483-2021 |
Sintered metallic porous materials - Determination of sulfidation corrosion properties{译} {译} 烧结金属多孔材料 硫化腐蚀性能的测定 |
China Non-ferrous Metal Industry
Standards All metal |
English PDF |
| YS/T 1482-2021 |
Sintered metallic porous materials - Determination of the strength of tubular compacts{译} {译} 烧结金属多孔材料 管状压坯强度的测定 |
China Non-ferrous Metal Industry
Standards All metal |
English PDF |
| YS/T 1480-2021 |
Nickel-aluminum intermetallic compound sintered porous material tubular filter element{译} {译} 镍铝金属间化合物烧结多孔材料管状过滤元件 |
China Non-ferrous Metal Industry
Standards All metal |
English PDF |
| YB/T 4975-2021 |
Technical specification for energy saving of water turbines in cooling towers of circulating water systems for metallurgical use{译} {译} 冶金用循环水系统冷却塔水轮机节能技术规范 |
China Metallurgy Industry
Standards All metal |
English PDF |
| JB/T 13967-2020 |
Sintered powder metallurgy hollow camshaft Specifications {译} 烧结式粉末冶金中空凸轮轴 技术条件 |
China Machinery Industry
Standards All metal |
English PDF |
| JB/T 10737-2020 |
Internal combustion engine - Powder metallurgy valve seat - Specifications {译} 内燃机 粉末冶金气门座 技术条件 |
China Machinery Industry
Standards All metal |
English PDF |
| SN/T 3011.1-2020 |
Identification of Phases of Imported Solid Waste of Metallic Minerals by X-ray Diffraction Part 1: General Principles {译} X射线衍射法鉴别金属矿产类进口固体废物物相 第1部分：通则 |
China Import&Export Inspection Industry
Standards All metal |
English PDF |
| SL/T 780—2020 |
Safety technical regulations for the fabrication and installation of metal structures in water conservancy and hydropower projects {译} 水利水电工程金属结构制作与安装安全技术规程 |
China Water Resources Industry
Standards All metal |
English PDF |
| JB/T 13636-2020 |
Thermal bimetallic component alloys - Specifications {译} 热双金属组元合金 技术条件 |
China Machinery Industry
Standards All metal |
English PDF |
| JB/T 11629-2020 |
YZPE series hoisting and metallurgical electromagnetic brake variable frequency speed regulation three-phase asynchronous motor technical conditions {译} YZPE系列起重及冶金用电磁制动变频调速三相异步电动机 技术条件 |
China Machinery Industry
Standards All metal |
English PDF |
| JB/T 10469.3-2020 |
Metallurgical equipment - Pneumatic disc brakes - Part 3: Water-cooled type {译} 冶金设备 气动盘式制动器 第3部分：水冷却型 |
China Machinery Industry
Standards All metal |
English PDF |
| JB/T 10469.2-2020 |
Metallurgical equipment - Pneumatic disc brakes - Part 2: Normally closed {译} 冶金设备 气动盘式制动器 第2部分：常闭型 |
China Machinery Industry
Standards All metal |
English PDF |
| JB/T 10469.1-2020 |
Metallurgical equipment - Pneumatic disc brakes - Part 1: Normally open {译} 冶金设备 气动盘式制动器 第1部分：常开型 |
China Machinery Industry
Standards All metal |
English PDF |
| JB/T 5870-2020 |
Technical conditions of YZR series high-voltage wound rotor three-phase asynchronous motors for lifting and metallurgy (frame size 560～710) {译} YZR系列起重及冶金用高压绕线转子三相异步电动机 技术条件（机座号560～710） |
China Machinery Industry
Standards All metal |
English PDF |
| JB/T 5175-2020 |
Diesel engine fuel injection pump, fuel injector assembly Metallographic inspection of main parts {译} 柴油机喷油泵、喷油器总成 主要零件金相检验 |
China Machinery Industry
Standards All metal |
English PDF |
| HJ1119-2020 |
Technical Specifications for Pollution Discharge Permit Application and Issuance Manufacture of Graphite and Other Non-metallic Mineral Products {译} 排污许可证申请与核发技术规范 石墨及其他非金属矿物制品制造 |
China Environment Industry
Standards All metal |
English PDF |
| YY/T 1706.1-2020 |
Surgical implants - Plasma sprayed pure titanium coating for metallic surgical implants - Part 1: General requirements {译} 外科植入物 金属外科植入物等离子喷涂纯钛涂层 第1部分：通用要求 |
China Pharmaceutics Industry
Standards All metal |
English PDF |
| HG/T 5763-2020 |
Determination of Metal Elements in Metallocene Polyolefin Catalysts Inductively Coupled Plasma Emission Spectrometry {译} 茂金属聚烯烃催化剂中金属元素的测定 电感耦合等离子体发射光谱法 |
China Chemistry Industry
Standards All metal |
English PDF |
| JC/T 2053-2020 |
Non-metallic packing {译} 非金属密封填料 |
China Building Material Industry
Standards All metal |
English PDF |
| YS/T 1393-2020 |
Precious Metal Medallion Blanks {译} 贵金属纪念章坯 |
China Non-ferrous Metal Industry
Standards All metal |
English PDF |
| YS/T 1375-2020 |
Powder metallurgy iron-based copper infiltration sintered parts {译} 粉末冶金铁基渗铜烧结件 |
China Non-ferrous Metal Industry
Standards All metal |
English PDF |
| YS/T 1349-2020 |
Copper-steel clad bimetallic plate for bearings {译} 轴承用铜钢复合双金属板 |
China Non-ferrous Metal Industry
Standards All metal |
English PDF |
| SJ/T 10874-2020 |
Detail specification for electronic components - Metallized polyethylene terephthalate film dielectric DC fixed capacitors, type CL21 - Evaluation level EZ {译} 电子元器件详细规范 CL21型金属化聚乙烯对苯二甲酸酯膜介质直流固定电容器 评定水平EZ |
China Electronics Industry
Standards All metal |
English PDF |
| YS/T 3036—2020 |
Technical specification for metal balance in gold beneficiation and metallurgy - Roasting process of gold concentrate {译} 黄金选冶金属平衡技术规范 金精矿焙烧工艺 |
China Non-ferrous Metal Industry
Standards All metal |
English PDF |
| SY/T 6662.2-2020 |
Non-metallic composite pipes for oil and gas industry - Part 2: Flexible composite high-pressure delivery pipes {译} 石油天然气工业用非金属复合管 第2部分：柔性复合高压输送管 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| SY/T 7464-2020 |
Technical standard for welding and non-destructive testing of corrosion-resistant alloy bimetallic clad pipes {译} 耐腐蚀合金双金属复合管焊接及无损检测技术标准 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| NB/T 10452-2026 |
Insulating liquid Epoxidized soybean oil for metallized film capacitors{译} {译} 绝缘液体 金属化薄膜电容器用环氧大豆油 |
China Energy Industry
Standards All metal |
English PDF |
| JB/T 6289-2019 |
Internal combustion engine Cast aluminum piston Metallographic inspection {译} 内燃机 铸造铝活塞 金相检验 |
China Machinery Industry
Standards All metal |
English PDF |
| SY/T 4214-2017 |
(Oil and gas construction project construction quality acceptance standard oil and gas field non-metallic pipeline project...) 石油天然气建设工程施工质量验收规范 油气田非金属管道工程 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| NB/T 47056-2017 |
(Test Method for Metallic and Fracture of Welded Joints of Boiler Compression Elements) 锅炉受压元件焊接接头金相和断口检验方法 |
China Energy industry
Standards All metal |
English PDF |
| SY/T 7353-2016 |
(Metallic components and components - Technical specification for heat - permeable zinc protective coatings) 金属构件及组件热渗锌防护层技术规范 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| SY/T 6770.5-2016 |
(Specification for acceptance of non - metallic pipes - Part 5: Fiber reinforced thermoplastics composite continuous tubes) 非金属管材质量验收规范 第 5 部分：纤维增强热塑性塑料复合连续管 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| SY/T 6769.5-2016 |
(Specification for design, construction and acceptance of non - metallic pipes - Part 5: Fiber reinforced thermoplastics composite continuous tubes) 非金属管道设计、施工及验收规范第 5 部分：纤维增强热塑性塑料复合连续管 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| SY/T 6662.8-2016 |
(Non - metallic composite pipes for industrial use in oil and gas industry - Part 8: Ceramic lined pipes and fittings) 石油天然气工业用非金属复合管 第8部分：陶瓷内衬管及管件 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| SY/T 4132-2016 |
(Code for construction of bimetallic composite steel pipe in oil and gas field) 油气田集输双金属复合钢管施工技术规范 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| NB/T 42084-2016 |
(Lifting and metallurgical three - phase asynchronous motor energy efficiency limit and energy efficiency rating) 起重及冶金用三相异步电动机能效限定值及能效等级 |
China Energy industry
Standards All metal |
English PDF |
| JG/T 499-2016 |
(Non - metallic Venetian blinds for shade) 建筑用遮阳非金属百叶帘 |
China Building & Construction
Standards All metal |
English PDF |
| SJ/T 11614-2016 |
(Electric vehicle drive motor system with a metallized film capacitors Specification) 电动汽车驱动电机系统用金属化薄膜电容器规范 |
China Electronics
Standards All metal |
English PDF |
| SJ/T 11200-2016 |
(Environmental testing Part 2-58: Tests - Test Td: surface mount components solderability, dissolution of metallization layers and resistance to soldering heat resistance test method) 环境试验 2-58部分：试验 试验td：表面组装元器件可焊性、金属化层耐溶蚀性和耐焊接热的试验方法 |
China Electronics
Standards All metal |
English PDF |
| SJ/T 11666.11-2016 |
(Manufacturing Execution Systems (MES) - Part 11: metallurgical industry manufacturing execution system software functions) 制造执行系统（mes）规范 第11部分：冶金行业制造执行系统软件功能 |
China Electronics
Standards All metal |
English PDF |
| JJG 2067-2016 |
Verification Scheme of Measuring Instruments for Metallic Rockwell Hardness 金属洛氏硬度计量器具检定系统表 |
China Metrological
Standards All metal |
English PDF |
| YY 0605.12-2016 |
Implants for surgery-Metallic materials - Part 12: Wrought cobalt-chromium-molybdenum alloy 外科植入物金属材料 第12部分：锻造钴-铬-钼合金 |
China Medicine & Medical Device
Standards All metal |
English PDF |
| QB/T 2511-2016 |
Single-ended metal halide lamps (Sc13-NaI series) with LC peak lead ballasts. Performance requirements 单端金属卤化物灯(钪钠系列)用lc顶峰超前式镇流器 性能要求 |
China Light Industry
Standards All metal |
English PDF |
| SY/T 6662.7-2016 |
Non-metallic composite pipes for petroleum and natural gas industries. Part 7: thermoplastics lined FRP composite pipes 石油天然气工业用非金属复合管 第7部分:热塑性塑料内衬玻璃钢复合管 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| YY/T 0294.1-2016 |
(Surgical instruments - Metallic materials - Part 1: Steel) |
China Medicine & Medical Device
Standards All metal |
English PDF |
| FZ/T 63029-2015 |
Polyester metallic film ribbon 涤纶金银丝织带 |
China Textile & Garment industry
Standards All metal |
English PDF |
| FZ/T 63026-2015 |
Polyester metallic yarn 涤纶金银丝（线） |
China Textile & Garment industry
Standards All metal |
English PDF |
| HG/T 2456.4-2015 |
Aluminum pigments for paints. Part 4: Vacuum metallized aluminum paste 涂料用铝颜料 第4部分：真空镀铝悬浮液 |
China Chemical Industry
Standards All metal |
English PDF |
| JC/T 2313-2015 |
Nitrogen leakage test machine for nonmetallic sealing material 非金属密封材料用氮气泄漏率试验机 |
China Building Materials
Standards All metal |
English PDF |
| JC/T 2312-2015 |
Creep relaxation test machine for nonmetallic sealing material 非金属密封材料用蠕变松弛率试验机 |
China Building Materials
Standards All metal |
English PDF |
| JC/T 2311-2015 |
Compressibility and recovery testing machine for non-metallic sealing material 非金属密封材料用压缩回弹试验机 |
China Building Materials
Standards All metal |
English PDF |
| SN/T 3701.13-2015 |
(Import of used machinery and electronic products testing technology requirements - Part 13: Non-metallic processing Cutting Machine) 进口旧机电产品检验技术要求 第13部分：非金属加工切削机床 |
China Import Export Inspection
Standards All metal |
English PDF |
| YD/T 1181.4-2015 |
(Non-metallic strength members of the cable properties - Part 4: glass fiber) 光缆用非金属加强件的特性 第4部分：玻纤纱 |
China Telecommunication
Standards All metal |
English PDF |
| YD/T 1181.1-2015 |
(Non-metallic strength members of the cable properties - Part 1: Glass fiber reinforced plastic rods) 光缆用非金属加强件的特性 第1部分：玻璃纤维增强塑料杆 |
China Telecommunication
Standards All metal |
English PDF |
| SJ/T 10465-2015 |
Metallized polyester film for capacitors 电容器用金属化聚酯薄膜 |
China Electronics
Standards All metal |
English PDF |
| SJ/T 10464-2015 |
Metallized polypropylene film for capacitors 电容器用金属化聚丙烯薄膜 |
China Electronics
Standards All metal |
English PDF |
| DL/T 715-2015 |
Selection guide for the metallic material of fossil power plants 火力发电厂金属材料选用导则 |
China Electricity & Power
Standards All metal |
English PDF |
| DL/T 1425-2015 |
The technical codes of anti-corrosion protection for metallic material in the transformer substation 变电站金属材料腐蚀防护技术导则 |
China Electricity & Power
Standards All metal |
English PDF |
| YY 0605.9-2015 |
Implants for surgery. Metallic materials. Part 9: Wrought high nitrogen stainless steel 外科植入物 金属材料 第9部分：锻造高氮不锈钢 |
China Medicine & Medical Device
Standards All metal |
English PDF |
| SY/T 6662.6-2014 |
Non-metallic composite pipes for petroleum and natural gas industries. Part 6: Flexible coiled composite pipes and end fittings used in the well 石油天然气工业用非金属复合管 第6部分：井下用柔性复合连续管及接头 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| SY/T 6662.5-2014 |
Non-metallic composite pipes for petroleum and natural gas industries. Part 5: Reinforced ultra-high molecular weight polyethylene coiled composite pipes and end fittings 石油天然气工业用非金属复合管 第5部分：增强超高分子量聚乙烯复合连续管及接头 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| SY/T 6662.4-2014 |
Non-metallic composite pipes for petroleum and natural gas industries. Part 4: Steel skeleton reinforced thermoplastic resin coiled composite pipes and end fittings 石油天然气工业用非金属复合管 第4部分：钢骨架增强热塑性塑料复合连续管及接头 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| NB/T 20322-2014 |
Commimioning test and operation criteria for cathodic protection system of buried metallic structure applied in nuclear power plants 压水堆核电厂埋地金属构筑物阴极保护系统调试运行准则 |
China Energy industry
Standards All metal |
English PDF |
| NB/T 20274-2014 |
Design specification for cathodic protection of buried metallic structure applied in nuclear power plants 核电厂埋地金属构筑物阴极保护设计规范 |
China Energy industry
Standards All metal |
English PDF |
| YY/T 0966-2014 |
Implants for surgery. Metallic materials. Unalloyed tantalum 外科植入物 金属材料 纯钽 |
China Medicine & Medical Device
Standards All metal |
English PDF |
| YY/T 0119.5-2014 |
Spinal implants. Components used in the surgical fixation of the spinal skeletal system. Part 5:Test method for measure the static and fatigue bending strength of metallic screws 脊柱植入物 脊柱内固定系统部件 第5部分:金属脊柱螺钉静态和疲劳弯曲强度测定试验方法 |
China Medicine & Medical Device
Standards All metal |
English PDF |
| YY/T 0119.4-2014 |
Spinal implants. Components used in the surgical fixation of the spinal skeletal system. Part4:Metallic spinal rods 脊柱植入物 脊柱内固定系统部件 第4部分:金属脊柱棒 |
China Medicine & Medical Device
Standards All metal |
English PDF |
| YY/T 0119.3-2014 |
Spinal implants. Components used in the surgical fixation of the spinal skeletal system. Part 3:Metallic spinal plates 脊柱植入物 脊柱内固定系统部件 第3部分:金属脊柱板 |
China Medicine & Medical Device
Standards All metal |
English PDF |
| YY/T 0119.2-2014 |
Spinal implants. Components uesd in the surgical fixation of the spinal skeletal system. Part 2:Metallic spinal screws 脊柱植入物 脊柱内固定系统部件 第2部分:金属脊柱螺钉 |
China Medicine & Medical Device
Standards All metal |
English PDF |
| YB/T 5293-2014 |
Metallic materials-Forging test 金属材料 顶锻试验方法 |
China GB-National
Standards All metal |
English PDF |
| QC/T 968-2014 |
Determination methods of platinum, palladium and rhodium contents in metallic catalytic converters 金属催化转化器中铂、钯、铑含量的测定方法 |
China Automobile & Vehicle industry
Standards All metal |
English PDF |
| SN/T 2876.3-2014 |
Technical requirements for the inspection of metallurgical industry complete set of equipment for import and export . Part 3:Metal casting equipment 进出口冶金工业成套设备检验技术要求 第3部分：金属铸造设备 |
China Import Export Inspection
Standards All metal |
English PDF |
| YY/T 0119.5-2014 |
Spinal implants - Components of spinal internal fixation systems - Part 5: Test methods for the determination of static and fatigue bending strength of metallic spinal screws{译} {译} 脊柱植入物 脊柱内固定系统部件 第5部分：金属脊柱螺钉静态和疲劳弯曲强度测定试验方法 |
China Pharmaceutics Industry
Standards All metal |
English PDF |
| SN/T 2876.2-2013 |
Technical requirements for the inspection of metallurgical industry complete set of equipment for import and export. Part 2: Metal smelting equipment 进出口冶金工业成套设备检验技术要求 第2部分:金属冶炼设备 |
China Import Export Inspection
Standards All metal |
English PDF |
| JJG 113-2013 |
Verification Regulation of Metallic Rockwell Hardness Reference Blocks (Scales A, B, C, D, E, F, G, H, K, N, T) 标准金属洛氏硬度块(A,B,C,D,E,F,G,H,K,N,T标尺)检定规程 |
China Metrological
Standards All metal |
English PDF |
| JJG 112-2013 |
Verification Regulation of Metallic Rockwell Hardness Testing Machines (Scales A, B, C, D, E, F, G, H, K, N, T) 金属洛氏硬度计(A,B,C,D,E,F,G,H,K,N,T标尺)检定规程 |
China Metrological
Standards All metal |
English PDF |
| SH/T 3613-2013 |
Technical specification for construction of nonmetallic piping in petrochemical industry 石油化工非金属管道工程施工技术规程 |
China Petrochemical Industry
Standards All metal |
English PDF |
| SH/T 3403-2013 |
Metallic ring joint gaskets for steel pipe flanges in petrochemical industry 石油化工钢制管法兰用金属环垫 |
China Petrochemical Industry
Standards All metal |
English PDF |
| SH/T 3401-2013 |
Nonmetallic flat gaskets for steel pipe flanges in petrochemical industry 石油化工钢制管法兰用非金属平垫片 |
China Petrochemical Industry
Standards All metal |
English PDF |
| SN/T 3653-2013 |
Food contact materials. Inorganic nonmetallic materials. Determination of fluoride release from water simulants. Ion chromatography 食品接触材料 无机非金属材料 水模拟物中氟离子的测定 离子色谱法 |
China Import Export Inspection
Standards All metal |
English PDF |
| NB/T 20005.15-2013 |
Carbon steel and low alloy steel for pressurized water reactor nuclear power plants. Part 15: Fittings welded with the addition of filler metal for use in class 2 and 3 auxiliary piping 压水堆核电厂用碳钢和低合金钢 第15部分：用填充金属焊接的2、3级管件 |
China Energy industry
Standards All metal |
English PDF |
| NB/T 20005.10-2013 |
Carbon steel and low alloy steel for pressurized water reactor nuclear power plants. Part 10: Class 2 and 3 steel pipes welded with the addition of filler metal 压水堆核电厂用碳钢和低合金钢 第10部分：用填充金属焊接的2、3级钢管 |
China Energy industry
Standards All metal |
English PDF |
| NB/SH/T 0866-2013 |
Wax for self-healing type metallized capacitor 自愈式金属化电容器用蜡 |
China Energy industry
Standards All metal |
English PDF |
| JJG 944-2013 |
Verification Regulation of Metallic Webster Hardness Testing Machines 金属韦氏硬度计检定规程 |
China Metrological
Standards All metal |
English PDF |
| QC/T 625-2013 |
Metallic coatings and conversion coatings for automobile 汽车用涂镀层和化学处理层 |
China Automobile & Vehicle industry
Standards All metal |
English PDF |
| SN/T 3553-2013 |
Codes of heavy metal and pesticide residues test for ballast water on international ships 国际航行船舶压舱水重金属及农药残留检测规程 |
China Import Export Inspection
Standards All metal |
English PDF |
| SN/T 3546-2013 |
Food contact materials. Metal materials. Determination of free formaldehyde of epoxy resin coatings for inner wall of food container. High performance liquid chromatography 食品接触材料 金属材料 食品容器内壁环氧树脂涂料中游离甲醛的测定 液相色谱法 |
China Import Export Inspection
Standards All metal |
English PDF |
| JC/T 2142-2012 |
Magnesium oxide ceramic for metallurgy 金属冶炼用氧化镁陶瓷 |
China Building Materials
Standards All metal |
English PDF |
| SN/T 3389-2012 |
Food contact materials. Polymeric coatings on metal substrates. Guide to the selection of conditions and test methods for overall migration 食品接触材料 金属基聚合物涂层 总迁移试验条件和方法选择指南 |
China Import Export Inspection
Standards All metal |
English PDF |
| SY/T 6769.4-2012 |
Specifications for the design, construction and acceptance of non-metallic pipelines. Part 4: Steel skeleton reinforced thermoplastic resin coiled composite pipes 非金属管道设计、施工及验收规范 第4部分：钢骨架增强塑料复合连续管 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| NB/T 47024-2012 |
Nonmetallic gaskets 非金属软垫片 |
China Energy industry
Standards All metal |
English PDF |
| HG/T 4374-2012 |
Specification for metallic tower packings 金属塔填料技术条件 |
China Chemical Industry
Standards All metal |
English PDF |
| SY/T 6662.3-2012 |
Non-metallic composite pipes for petroleum and natural gas industries. Part 3: Reinforced MC nylon pipes and nylon-steel composite pipes 石油天然气工业用非金属复合管 第3部分：增强mc尼龙管和尼龙-钢复合管 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| SY/T 6662.2-2012 |
Non-metallic composite pipe for petroleum and natural gas industries. Part 2: Flexible composite pipe for high pressure transmission 石油天然气工业用非金属复合管 第2部分：柔性复合高压输送管 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| SY/T 6662.1-2012 |
Non-metallic composite pipe for petroleum and natural gas industries. Part 1: Steel skeleton reinforced polythene composite pipes 石油天然气工业用非金属复合管 第1部分：钢骨架增强聚乙烯复合管 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| DL/T 1162-2012 |
Method for steam oxidation test of metallic materials for fossil power plants 火电厂金属材料高温蒸汽氧化试验方法 |
China Electricity & Power
Standards All metal |
English PDF |
| SB/T 10721-2012 |
Metallic materials of electronic commerce platform construction and management specification 金属材料电子商务平台建设与管理规范 |
China Commerce
Standards All metal |
English PDF |
| SN/T 0367-2012 |
Rules for the inspection of precious metals and their alloys for import and export 进出口贵金属及其合金检验规程 |
China Import Export Inspection
Standards All metal |
English PDF |
| SY/T 6078-2012 |
Labour quota for fabrication and installation engineering of vertical metal tank 金属立式储罐制作安装工程劳动定额 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| YY/T 0859-2011 |
Standard guide for finite element analysis (FEA) of metallic vascular stents subjected to uniform radial loading 均匀径向载荷下金属血管支架有限元分析方法指南 |
China Medicine & Medical Device
Standards All metal |
English PDF |
| YY/T 0856-2011 |
Implants for orthosynthesis. Metallic angled fixation device 骨接合植入物 金属角度固定器 |
China Medicine & Medical Device
Standards All metal |
English PDF |
| YY/T 0591-2011 |
Implants for orthosynthesis. Metallic lockable intramedullary nail 骨接合植入物 金属带锁髓内钉 |
China Medicine & Medical Device
Standards All metal |
English PDF |
| QC/T 888-2011 |
All-metal hexagon collar weld nuts. Prevailing torque type 焊接六角凸缘锁紧螺母 |
China Automobile & Vehicle industry
Standards All metal |
English PDF |
| JC/T 2053-2011 |
Nonmetallic sealing packing 非金属密封填料 |
China Building Materials
Standards All metal |
English PDF |
| NB/T 20036.3-2011 |
Qualification of active mechanical equipment used in nuclear power plants. Part 3: Qualification of nonmetallic parts 核电厂能动机械设备鉴定 第3部分:非金属物项鉴定 |
China Energy industry
Standards All metal |
English PDF |
| QB/T 4188-2011 |
Precious metal alloy coatings jeweller. General technical requirements of plating 贵金属覆盖层饰品 电镀通用技术条件 |
China Light Industry
Standards All metal |
English PDF |
| QB/T 4187-2011 |
Precious metal alloy coatings jewellery. General technical requirements of assembly 贵金属覆盖层饰品 装配通用技术条件 |
China Light Industry
Standards All metal |
English PDF |
| QB/T 4186-2011 |
Precious metal alloy coatings jewellery. General technical requirements of casting 贵金属覆盖层饰品 铸造通用技术条件 |
China Light Industry
Standards All metal |
English PDF |
| QB/T 4160-2011 |
Watches with jewels and precious metal alloys 使用宝石和贵金属的手表 |
China Light Industry
Standards All metal |
English PDF |
| SH/T 3161-2011 |
Technical specification of nonmetallic piping in petrochemical engineering 石油化工非金属管道技术规范 |
China Petrochemical Industry
Standards All metal |
English PDF |
| SH 3012-2011 |
Specification for design of metallic piping layout in petrochemical engineering 石油化工金属管道布置设计规范 |
China Petrochemical Industry
Standards All metal |
English PDF |
| CJJ/T 154-2011 |
Technical specification for metallic pipeline engineering of building water supply 建筑给水金属管道工程技术规程 |
China Urban Construction industry
Standards All metal |
English PDF |
| YY/T 0812-2010 |
Implants for surgery. Metallic implantable strands and cables 外科植入物 金属缆线和缆索 |
China Medicine & Medical Device
Standards All metal |
English PDF |
| YY/T 0809.2-2010 |
Implants for surgery. Partial and total hip joint prostheses. Part 2: Articulating surfaces made of metallic, ceramic and plastics materials 外科植入物 部分和全髋关节假体 第2部分：金属、陶瓷及塑料关节面 |
China Medicine & Medical Device
Standards All metal |
English PDF |
| JC/T 2010-2010 |
Metal and metallic mineral fillings for friction materials 摩擦材料用金属及金属矿物填料 |
China Building Materials
Standards All metal |
English PDF |
| JC/T 2009-2010 |
Non-metallic mineral fillings for friction materials 摩擦材料用非金属添加物 |
China Building Materials
Standards All metal |
English PDF |
| JC/T 2004-2010 |
Metallic fiber for friction materials 摩擦材料用金属纤维 |
China Building Materials
Standards All metal |
English PDF |
| SN/T 3009-2011 |
Identification of seawater corrosion on metallic surface by SEM 金属表面海水腐蚀扫描电镜鉴定方法 |
China Import Export Inspection
Standards All metal |
English PDF |
| TB/T 3239-2010 |
Metallographic examination graph spectrum of widmanstatten structure in microalloying steel used for railway 铁路用微合金化钢魏氏组织金相检验图谱 |
China Railway & Train
Standards All metal |
English PDF |
| SY/T 6770.3-2010 |
Quality acceptance code of non-metalic pipe. Part 3: Anticorrosion plastic alloy composite pipe 非金属管材质量验收规范 第3部分：塑料合金防腐蚀复合管 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| SY/T 6769.3-2010 |
Specifications for the design, construction and acceptance of non-metallic pipelines. Part 3: Anticorrosion plastic alloy composite pipes 非金属管道设计、施工及验收规范 第3部分：塑料合金防腐蚀复合管 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| SY/T 6769.2-2010 |
Specifications for the design, construction and acceptance of non-metallic pipelines. Part 2: Steel framed polyethylene composite pipes 非金属管道设计、施工及验收规范 第2部分：钢骨架聚乙烯塑料复合管 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| SY/T 6769.1-2010 |
Specifications for the design, construction and acceptance of non-metallic pipelines. Part 1: High pressure fiberglass reinforced plastic linepipes 非金属管道设计、施工及验收规范 第1部分：高压玻璃纤维管线管 |
China Oil & Gas Industry
Standards All metal |
English PDF |
| DL/T 1105.4-2010 |
The technical guideline of non-destructive inspection for fillet welds of small diameter nozzle stubs on boiler headers in power stations. Part 4: Magnetic memory metal diagnostic technique 电站锅炉集箱小口径接管座角焊缝 无损检测技术导则 第4部分：磁记忆检测 |
China Electricity & Power
Standards All metal |
English PDF |
| SN/T 2399-2010 |
Evaluation method for antimicrobial metallic materials 抗菌金属材料评价方法 |
China Import Export Inspection
Standards All metal |
English PDF |
| YY/T 0528-2009 |
Dental metallic materials. Corrosion test methods 牙科金属材料 腐蚀试验方法 |
China Medicine & Medical Device
Standards All metal |
English PDF |
| YY/T 0512-2009 |
Implants for surgery. Metallic materials. Classification of microstructures for alpha + beta titanium alloy bars 外科植入物 金属材料 α+β钛合金棒材显微组织的分类 |
China Medicine & Medical Device
Standards All metal |
English PDF |
| YY 0341-2009 |
General technological requirements for non-active metallic surgical implants for osteosynthesis 骨接合用无源外科金属植入物通用技术条件 |
China Medicine & Medical Device
Standards All metal |
English PDF |
| TB/T 3212.3-2009 |
Metallographic atlas for metallographic microstructure examination of low alloy cast steel for rolling stock. Part 31:Grades E cast steel 机车车辆用低合金铸钢金相组织检验图谱 第3部分：e级铸钢 |
China Railway & Train
Standards All metal |
English PDF |
| TB/T 3212.2-2009 |
Metallographic atlas for metallographic microstructure examination of low alloy cast steel for rolling stock. Part 2: Grades C cast steel 机车车辆用低合金铸钢金相组织检验图谱 第2部分：c级铸钢 |
China Railway & Train
Standards All metal |
English PDF |
| TB/T 3212.1-2009 |
Metallographic atlas for metallographic microstructure examination of low alloy cast steel for rolling stock. Part 1: Grades B and B+ cast steel 机车车辆用低合金铸钢金相组织检验图谱 第1部分：b级铸钢、b+级铸钢 |
China Railway & Train
Standards All metal |
English PDF |
| HG/T 20633-2009 |
Metallic ring joint gaskets for use with steel pipe flanges (Class designated) 钢制管法兰用金属环形垫（Class系列） |
China Chemical Industry
Standards All metal |
English PDF |
| HG/T 20627-2009 |
Non-metallic flat gaskets for use with steel pipe flanges (Class designated) 钢制管法兰非金属平垫片（Class系列） |
China Chemical Industry
Standards All metal |
English PDF |
| HG/T 20612-2009 |
Metallic ring joint gaskets for use with steel pipe flanges (PN designated) 钢制管法兰用金属环形垫（PN系列） |
China Chemical Industry
Standards All metal |
English PDF |
| Find out:274Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
