Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
HB 7716.18-2022 |
Spectral analysis method of chemical composition of titanium Alloys Part 18: Determination of lithium and lead content by inductively coupled plasma atomic emission spectrometry {译} 钛合金化学成分光谱分析方法 第 18 部分:电感耦合等离子体原子发射光谱法测定锂、铅含量 |
China Aviation Industry
Standards Alloys |
English PDF |
HB 7716.17-2022 |
Spectral analysis method of chemical composition of titanium Alloys Part 17: Determination of boron content by inductively coupled plasma atomic emission spectrometry {译} 钛合金化学成分光谱分析方法 第 17 部分:电感耦合等离子体原子发射光谱法测定硼含量 |
China Aviation Industry
Standards Alloys |
English PDF |
HB 7716.16-2022 |
Spectral analysis method of chemical composition of titanium Alloys Part 16: Determination of platinum and palladium content by inductively coupled plasma atomic emission spectrometry {译} 钛合金化学成分光谱分析方法 第 16 部分:电感耦合等离子体原子发射光谱法测定铂、钯含量 |
China Aviation Industry
Standards Alloys |
English PDF |
HB 7716.15-2022 |
Spectral analysis method of chemical composition of titanium Alloys Part 15: Determination of tungsten, niobium, tantalum and nickel content by inductively coupled plasma atomic emission spectrometry {译} 钛合金化学成分光谱分析方法 第 15 部分:电感耦合等离子体原子发射光谱法测定钨、铌、钽、镍含量 |
China Aviation Industry
Standards Alloys |
English PDF |
HB 8542-2018 |
Specification for tungsten-based high-density Alloys for aerospace counterweights {译} 航空配重用钨基高密度合金规范 |
China Aviation Industry
Standards Alloys |
English PDF |
HB_Z 419-2017 |
Heat treatment process of titanium and titanium Alloys for civil aircraft {译} 民用飞机用钛及钛合金热处理工艺 |
China Aviation Industry
Standards Alloys |
English PDF |
HB_Z 418.1-2017 |
Heat treatment process of aluminum Alloys for civil aircraft Part 1: Heat treatment process of cast aluminum alloys {译} 民用飞机用铝合金的热处理工艺 第1部分:铸造铝合金热处理工艺 |
China Aviation Industry
Standards Alloys |
English PDF |
HB 8422-2014(2017) |
Electron probe quantitative analysis method of trace elements in Alloys {译} 合金中微量元素电子探针定量分析方法 |
China Aviation Industry
Standards Alloys |
English PDF |
YS/T 1585.4-2022 |
Methods for chemical analysis of silver-tungsten Alloys - Part 4: Determination of carbon content - High-frequency induction furnace combustion infrared absorption method {译} 银钨合金化学分析方法 第4部分:碳含量的测定 高频感应炉燃烧红外吸收法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1585.2-2022 |
Methods for chemical analysis of silver-tungsten Alloys - Part 2: Determination of tungsten content - Cinchonine gravimetric method {译} 银钨合金化学分析方法 第2部分:钨含量的测定 辛可宁重量法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1585.1-2022 |
Methods for chemical analysis of silver-tungsten Alloys - Part 1: Determination of silver content - Potentiometric titration {译} 银钨合金化学分析方法 第1部分:银含量的测定 电位滴定法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1550.5-2022 |
Methods for chemical analysis of beryllium Alloys - Part 5: Determination of oxygen content - Inert gas fusion infrared absorption method {译} 铍合金化学分析方法 第5部分:氧含量的测定 惰气熔融红外吸收法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1550.4-2022 |
Methods for chemical analysis of beryllium Alloys - Part 4: Determination of carbon content - Infrared absorption method {译} 铍合金化学分析方法 第4部分:碳含量的测定 红外吸收法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1550.3-2022 |
Methods for chemical analysis of beryllium Alloys - Part 3: Determination of silicon content - Molybdenum blue spectrophotometric method {译} 铍合金化学分析方法 第3部分:硅含量的测定 钼蓝分光光度法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1550.2-2022 |
Methods for chemical analysis of beryllium Alloys - Part 2: Determination of silver, cobalt and germanium content - Inductively coupled plasma atomic emission spectrometry {译} 铍合金化学分析方法 第2部分:银、钴和锗含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1550.1-2022 |
Methods for chemical analysis of beryllium Alloys - Part 1: Determination of beryllium content - Potassium fluoride titration {译} 铍合金化学分析方法 第1部分:铍含量的测定 氟化钾滴定法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1563.7-2022 |
Methods for chemical analysis of molybdenum-rhenium Alloys - Part 7: Determination of hydrogen content - Inert gas fusion - infrared absorption method and thermal conductivity method {译} 钼铼合金化学分析方法 第7部分:氢含量的测定 惰性气体熔融-红外吸收法和热导法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1563.2-2022 |
Methods for chemical analysis of molybdenum-rhenium Alloys - Part 2: Determination of molybdenum content - Lead molybdate gravimetric method {译} 钼铼合金化学分析方法 第2部分:钼含量的测定 钼酸铅重量法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1563.1-2022 |
Methods for chemical analysis of molybdenum-rhenium Alloys - Part 1: Determination of rhenium content - Inductively coupled plasma atomic emission spectrometry {译} 钼铼合金化学分析方法 第1部分:铼含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1562.4-2022 |
Methods for chemical analysis of tungsten copper Alloys - Part 4: Determination of carbon content - High frequency combustion infrared absorption method {译} 钨铜合金化学分析方法 第4部分:碳含量的测定 高频燃烧红外吸收法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1562.3-2022 |
Methods for chemical analysis of tungsten-copper Alloys - Part 3: Determination of cobalt, iron, nickel, zinc content - Inductively coupled plasma atomic emission spectrometry {译} 钨铜合金化学分析方法 第3部分:钴、铁、镍、锌含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1562.2-2022 |
Methods for chemical analysis of tungsten-copper Alloys - Part 2: Determination of tungsten content - Cinchonine gravimetric method {译} 钨铜合金化学分析方法 第2部分:钨含量的测定 辛可宁重量法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1562.1-2022 |
Methods for chemical analysis of tungsten-copper Alloys - Part 1: Determination of copper content - Iodometric method and inductively coupled plasma atomic emission spectrometry {译} 钨铜合金化学分析方法 第1部分:铜含量的测定 碘量法和电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1075.13-2022 |
Methods for chemical analysis of vanadium-aluminum and molybdenum-aluminum master Alloys - Part 13: Determination of iron, silicon, molybdenum and chromium content - Inductively coupled plasma atomic emission spectrometry {译} 钒铝、钼铝中间合金化学分析方法 第13部分:铁、硅、钼、铬含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1075.12-2022 |
Methods for chemical analysis of vanadium-aluminum and molybdenum-aluminum master Alloys-Part 12: Determination of phosphorus content-Molybdenum blue spectrophotometric method {译} 钒铝、钼铝中间合金化学分析方法 第12部分:磷含量的测定 钼蓝分光光度法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1075.11-2022 |
Methods for chemical analysis of vanadium-aluminum and molybdenum-aluminum master Alloys—Part 11: Determination of nitrogen content—Inert gas fusion thermal conductivity method {译} 钒铝、钼铝中间合金化学分析方法 第11部分:氮含量的测定 惰性气体熔融热导法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1075.10-2022 |
Methods for chemical analysis of vanadium-aluminum and molybdenum-aluminum master Alloys - Part 10: Determination of sodium content - Flame atomic absorption spectrometry {译} 钒铝、钼铝中间合金化学分析方法 第10部分:钠含量的测定 火焰原子吸收光谱法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1075.9-2022 |
Methods for chemical analysis of vanadium-aluminum and molybdenum-aluminum master Alloys - Part 9: Determination of chlorine content - silver chloride spectrophotometric method {译} 钒铝、钼铝中间合金化学分析方法 第9部分:氯含量的测定 氯化银分光光度法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1537.1-2022 |
Methods for chemical analysis of lithium boron Alloys - Part 1: Determination of lithium content - Lithium sulfate weighing method {译} 锂硼合金化学分析方法 第1部分:锂含量的测定 硫酸锂称量法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 482-2022 |
Methods of analysis of copper and copper Alloys - spark discharge atomic emission spectrometry {译} 铜及铜合金分析方法 火花放电原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YB/T 4174.3-2022 |
Analytical methods of silicon-calcium Alloys - Part 3: Determination of calcium oxide content - Potentiometric titration {译} 硅钙合金分析方法 第3部分:氧化钙含量的测定 电位滴定法 |
China Metallurgy Industry
Standards Alloys |
English PDF |
YB/T 4174.1-2022 |
Analytical methods for silicon-calcium Alloys - Part 1: Determination of aluminum content - Inductively coupled plasma atomic emission spectrometry {译} 硅钙合金分析方法 第1部分:铝含量的测定 电感耦合等离子体原子发射光谱法 |
China Metallurgy Industry
Standards Alloys |
English PDF |
YB/T 4908.6-2021 |
Vanadium aluminum Alloys - Determination of oxygen and nitrogen content - Inert gas fusion infrared absorption method and thermal conductivity method {译} 钒铝合金 氧、氮含量的测定 惰性气体熔融红外吸收法和热导法 |
China Metallurgy Industry
Standards Alloys |
English PDF |
YB/T 4908.5-2021 |
Vanadium aluminum Alloys - Determination of carbon and sulfur content - High frequency induction combustion - infrared absorption method {译} 钒铝合金 碳、硫含量的测定 高频感应燃烧-红外吸收法 |
China Metallurgy Industry
Standards Alloys |
English PDF |
YB/T 4908.4-2021 |
Vanadium aluminium Alloys - Determination of hydrogen content - Inert gas fusion infrared absorption method or thermal conductivity method {译} 钒铝合金 氢含量的测定 惰性气体熔融红外吸收法或热导法 |
China Metallurgy Industry
Standards Alloys |
English PDF |
YB/T 4908.3-2021 |
Vanadium-aluminum Alloys - Determination of aluminum content - Barium salt strong base separation - EDTA titration method {译} 钒铝合金 铝含量的测定 钡盐强碱分离-EDTA滴定法 |
China Metallurgy Industry
Standards Alloys |
English PDF |
YB/T 4908.2-2021 |
Vanadium-aluminum Alloys - Determination of silicon, iron, phosphorus, boron, chromium, nickel, tungsten, copper, manganese, molybdenum content - Inductively coupled plasma atomic emission spectrometry {译} 钒铝合金 硅、铁、磷、硼、铬、镍、钨、铜、锰、钼含量的测定 电感耦合等离子体原子发射光谱法 |
China Metallurgy Industry
Standards Alloys |
English PDF |
YB/T 4908.1-2021 |
Vanadium aluminum Alloys - Determination of vanadium content - Ammonium persulfate oxidation - ferrous ammonium sulfate titration method {译} 钒铝合金 钒含量的测定 过硫酸铵氧化-硫酸亚铁铵滴定法 |
China Metallurgy Industry
Standards Alloys |
English PDF |
YB/T 4907-2021 |
Ferromanganese, manganese-silicon Alloys and metal manganese - Determination of manganese, silicon, iron and phosphorus content - Wavelength dispersive X-ray fluorescence spectrometry {译} 锰铁、锰硅合金和金属锰 锰、硅、铁、磷含量的测定 波长色散X射线荧光光谱法 |
China Metallurgy Industry
Standards Alloys |
English PDF |
YS/T 1466-2021 |
Sampling method for chemical composition analysis of zirconium and zirconium Alloys{译} {译} 锆及锆合金化学成分分析取制样方法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1464-2021 |
Methods for chemical analysis of niobium-tungsten Alloys - Determination of tungsten, molybdenum, zirconium, tantalum, silicon, iron, aluminum, titanium and copper{译} {译} 铌钨合金化学分析方法 钨、钼、锆、钽、硅、铁、铝、钛、铜量的测定 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
SN/T 5351-2021 |
Determination of hydrogen in aluminium and aluminium Alloys - Inert gas fusion - infrared absorption method{译} {译} 铝和铝合金中氢的测定 惰性气体熔融-红外吸收法 |
China Import&Export Inspection Industry
Standards Alloys |
English PDF |
NB/T 47019.9-2021 |
Specifications for ordering tubes for boilers and heat exchangers - Part 9: Nickel and nickel Alloys {译} 锅炉、热交换器用管订货技术条件 第9部分:镍和镍合金 |
China Energy Industry
Standards Alloys |
English PDF |
NB/T 47019.8-2021 |
Specifications for ordering tubes for boilers and heat exchangers - Part 8: Titanium and titanium Alloys {译} 锅炉、热交换器用管订货技术条件 第8部分:钛和钛合金 |
China Energy Industry
Standards Alloys |
English PDF |
NB/T 47019.7-2021 |
Specifications for ordering tubes for boilers and heat exchangers - Part 7: Copper and copper Alloys {译} 锅炉、热交换器用管订货技术条件 第7部分:铜和铜合金 |
China Energy Industry
Standards Alloys |
English PDF |
JB/T 13636-2020 |
Thermal bimetallic component Alloys - Specifications {译} 热双金属组元合金 技术条件 |
China Machinery Industry
Standards Alloys |
English PDF |
YS/T 806-2020 |
Methods for chemical analysis of aluminum and aluminum Alloys - Determination of element content - X-ray fluorescence spectrometry {译} 铝及铝合金化学分析方法 元素含量的测定 X射线荧光光谱法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1382-2020 |
Method for chemical analysis of silver-copper-phosphorus Alloys-Determination of phosphorus content-Phosphorus molybdenum yellow spectrophotometry {译} 银铜磷合金化学分析方法 磷含量的测定 磷钼黄分光光度法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1370-2020 |
Titanium-tin master Alloys for titanium alloys {译} 钛合金用钛锡中间合金 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 1369-2020 |
Nickel-Molybdenum Master Alloys for Titanium Alloys {译} 钛合金用镍钼中间合金 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 347-2020 |
Method for determination of average grain size of copper and copper Alloys {译} 铜及铜合金平均晶粒度测定方法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 668-2020 |
Sampling method for physical and chemical testing of copper and copper Alloys {译} 铜及铜合金理化检测取样方法 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
YS/T 491-2020 |
Flux for aluminium and aluminium Alloys {译} 铝及铝合金用熔剂 |
China Non-ferrous Metal Industry
Standards Alloys |
English PDF |
XB/T 629.2-2020 |
Methods for chemical analysis of rare earth-aluminum master Alloys-Part 2: Determination of the total amount of rare earths {译} 稀土铝中间合金化学分析方法 第2部分:稀土总量的测定 |
China Rare Earth Industry
Standards Alloys |
English PDF |
XB/T 629.1-2020 |
Methods for chemical analysis of rare earth aluminum master Alloys - Part 1: Determination of rare earth elements {译} 稀土铝中间合金化学分析方法 第1部分:稀土元素量的测定 |
China Rare Earth Industry
Standards Alloys |
English PDF |
SJ/T 1542-2020 |
Methods for chemical analysis of nickel and nickel Alloys for electrical vacuum devices {译} 电真空器件用镍及镍合金化学分析方法 |
China Electronics Industry
Standards Alloys |
English PDF |
SJ/T 1543-2020 |
Spectral analysis method of nickel and nickel Alloys for electric vacuum devices {译} 电真空器件用镍及镍合金光谱分析方法 |
China Electronics Industry
Standards Alloys |
English PDF |
HG/T 20223-2017 |
(Technical specification for welding and brazing of copper and copper Alloys) 铜及铜合金焊接及钎焊技术规程 |
China Chemical Industry
Standards Alloys |
English PDF |
NB/T 20006.39-2017 |
(Steel Alloys for PWR nuclear power plants - Part 39: Steel rods for integrated jack - up assemblies) 压水堆核电厂用合金钢 第39部分:一体化堆顶组件用钢棒 |
China Energy industry
Standards Alloys |
English PDF |
NB/T 20006.38-2017 |
(Hydraulic steel Alloys for pressurized water reactors - Part 38: 19MnNiMo forgings for core fillers) 压水堆核电厂用合金钢 第38部分:堆芯补水箱用19mnnimo锻件 |
China Energy industry
Standards Alloys |
English PDF |
NB/T 20006.37-2017 |
(Steel Alloys for PWR nuclear power plants - Part 37: Reactor pressure vessels Non-core areas with 19MnNiMo forgings) 压水堆核电厂用合金钢 第37部分:反应堆压力容器非堆芯区用19mnnimo锻件 |
China Energy industry
Standards Alloys |
English PDF |
NB/T 20006.36-2017 |
(Hydraulic steel Alloys for pressurized water reactors - Part 36: Reactor pressure vessel core area with 19MnNiMo forgings) 压水堆核电厂用合金钢 第36部分:反应堆压力容器堆芯区用19mnnimo锻件 |
China Energy industry
Standards Alloys |
English PDF |
QB/T 4741-2014 |
Aluminium Alloys hanger 铝合金衣架 |
China Light Industry
Standards Alloys |
English PDF |
SN/T 3910-2014 |
(Sponge titanium, titanium and titanium Alloys - Inductively coupled plasma manganese, chromium, nickel, aluminum, molybdenum, tin, vanadium, copper emission spectrometry) 海绵钛、钛及钛合金中锰、铬、镍、铝、钼、锡、钒、铜的测定 电感耦合等离子体发射光谱法 |
China Import Export Inspection
Standards Alloys |
English PDF |
SN/T 0367-2012 |
Rules for the inspection of precious metals and their Alloys for import and export 进出口贵金属及其合金检验规程 |
China Import Export Inspection
Standards Alloys |
English PDF |
QB/T 4160-2011 |
Watches with jewels and precious metal Alloys 使用宝石和贵金属的手表 |
China Light Industry
Standards Alloys |
English PDF |
SN/T 2786-2011 |
Method for analysis of magnesium and magnesium Alloys. Optical emission spectrometry 镁及镁合金光电发射光谱分析法 |
China Import Export Inspection
Standards Alloys |
English PDF |
YY 1026-2009 |
Dentistry. Mercury and Alloys for dental amalsam 牙科学 汞及银合金粉 |
China Medicine & Medical Device
Standards Alloys |
English PDF |
DL/T 1114-2009 |
Steel-work corrosion and protection-test methods for thermal spraying(Zinc, aluminium and their Alloys) 钢结构腐蚀防护热喷涂(锌、铝及合金涂层)及其试验方法 |
China Electricity & Power
Standards Alloys |
English PDF |
YY 0626-2008 |
Dental casting Alloys with noble metal content of at least 25% but less than 75% 贵金属含量25%~75%的牙科铸造合金 |
China Medicine & Medical Device
Standards Alloys |
English PDF |
YY 0620-2008 |
Dentistry. Casting gold Alloys 牙科学铸造金合金 |
China Medicine & Medical Device
Standards Alloys |
English PDF |
YY/T 0641-2008 |
Standard Test Method for Transformation Temperature Of Nickel. Titanium Alloys by Thermal Analysis 热分析法测量niti合金相变温度的标准方法 |
China Medicine & Medical Device
Standards Alloys |
English PDF |
SJ 20892-2003 |
Specification for anodic coatings for aluminum and aluminum Alloys 铝和铝合金阳极氧化膜规范 |
China Electronics
Standards Alloys |
English PDF |
SJ 20813-2002 |
Specification for chemical conversion on aluminum and aluminum Alloys 铝和铝合金化学转化膜规范 |
China Electronics
Standards Alloys |
English PDF |
QC/T 516-1999 |
(Automotive engine shaft Waxi Ji and metallurgical standard lead-based Alloys) 汽车发动机轴瓦锡基和铅基合金 金相标准 |
China Automobile & Vehicle industry
Standards Alloys |
English PDF |
SJ/T 10379-1993 |
Method for the determination of thorium dioxide in thorium tungsten Alloys 钨钍合金中二氧化钍的测定方法 |
China Electronics
Standards Alloys |
English PDF |
HGJ 223-1992 |
Technical specification for welding copper and copper Alloys 铜及铜合金焊接及钎焊接技术规程 |
China Chemical Industry
Standards Alloys |
English PDF |
HGJ 222-1992 |
Technical specification for welding aluminium and aluminium Alloys 铝及铝合金焊接技术规程 |
China Chemical Industry
Standards Alloys |
English PDF |
QB/T 3833-1999 |
Testing method of the oxidation treatment coatings of the aluminum and aluminum Alloys for the light industrial pro 轻工产品铝或铝合金氧化处理层的测试方法 |
China Light Industry
Standards Alloys |
English PDF |
Find out:79Items | To Page of: First -Previous-Next -Last | 1 |