Cart:
Keyword:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| KA/T 7—2023 |
Coal mine water Chemical analysis method {译} 煤矿水化学分析方法 |
China Mine safety industry
Standards Chemical analysis method |
 English PDF |
| JB/T 14411-2023 |
Diesel engine coated molecular sieve SCR catalyst chemical composition analysis method {译} 柴油机 涂覆式分子筛SCR 催化剂 化学成分分析方法 |
China Machinery Industry
Standards Chemical analysis method |
English PDF |
| JB/T 14410-2023 |
Diesel engine coated vanadium-based SCR catalyst chemical composition analysis method {译} 柴油机 涂覆式钒基 SCR催化剂 化学成分分析方法 |
China Machinery Industry
Standards Chemical analysis method |
English PDF |
| HB 7716.18-2022 |
Spectral analysis method of chemical composition of titanium alloys Part 18: Determination of lithium and lead content by inductively coupled plasma atomic emission spectrometry {译} 钛合金化学成分光谱分析方法 第 18 部分：电感耦合等离子体原子发射光谱法测定锂、铅含量 |
China Aviation Industry
Standards Chemical analysis method |
English PDF |
| HB 7716.17-2022 |
Spectral analysis method of chemical composition of titanium alloys Part 17: Determination of boron content by inductively coupled plasma atomic emission spectrometry {译} 钛合金化学成分光谱分析方法 第 17 部分：电感耦合等离子体原子发射光谱法测定硼含量 |
China Aviation Industry
Standards Chemical analysis method |
English PDF |
| HB 7716.16-2022 |
Spectral analysis method of chemical composition of titanium alloys Part 16: Determination of platinum and palladium content by inductively coupled plasma atomic emission spectrometry {译} 钛合金化学成分光谱分析方法 第 16 部分：电感耦合等离子体原子发射光谱法测定铂、钯含量 |
China Aviation Industry
Standards Chemical analysis method |
English PDF |
| HB 7716.15-2022 |
Spectral analysis method of chemical composition of titanium alloys Part 15: Determination of tungsten, niobium, tantalum and nickel content by inductively coupled plasma atomic emission spectrometry {译} 钛合金化学成分光谱分析方法 第 15 部分：电感耦合等离子体原子发射光谱法测定钨、铌、钽、镍含量 |
China Aviation Industry
Standards Chemical analysis method |
English PDF |
| HG/T 6150-2023 |
X-ray fluorescence spectrometry method for chemical composition analysis of lubricating oil hydroisomerization catalyst {译} 润滑油加氢异构催化剂化学成分分析方法 X射线荧光光谱法 |
China Chemistry Industry
Standards Chemical analysis method |
English PDF |
| JC/T 753-2022 |
Chemical analysis method of siliceous glass raw material {译} 硅质玻璃原料化学分析方法 |
China Building Material Industry
Standards Chemical analysis method |
English PDF |
| FZ/T 01162—2022 |
Textiles - Quantitative chemical analysis - Mixtures of polyethylene fibers with certain other fibers (paraffin oil method) {译} 纺织品 定量化学分析 聚乙烯纤维与某些其他纤维的混合物（石蜡油法） |
China Textile Industry
Standards Chemical analysis method |
English PDF |
| FZ/T 01159—2022 |
Textiles - quantitative chemical analysis - mixture of silk and wool or other animal hair fibers (hydrochloric acid method) {译} 纺织品 定量化学分析 蚕丝与羊毛或其他动物毛纤维的混合物（盐酸法） |
China Textile Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1512.10-2022 |
Methods for chemical analysis of copper smelting dust - Part 10: Determination of copper, lead, zinc, bismuth, arsenic, indium, silver, cadmium, antimony, calcium, magnesium and iron - Inductively coupled plasma atomic emission spectrometry {译} 铜冶炼烟尘化学分析方法 第10部分：铜、铅、锌、铋、砷、铟、银、镉、锑、钙、镁和铁含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1585.4-2022 |
Methods for chemical analysis of silver-tungsten alloys - Part 4: Determination of carbon content - High-frequency induction furnace combustion infrared absorption method {译} 银钨合金化学分析方法 第4部分：碳含量的测定 高频感应炉燃烧红外吸收法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1585.3-2022 |
Silver-tungsten alloy Chemical analysis methods - Part 3: Determination of cobalt, chromium, copper, magnesium, iron, potassium, sodium, tin, nickel, silicon, zinc content - Inductively coupled plasma atomic emission spectrometry {译} 银钨合金化学分析方法 第3部分：钴、铬、铜、镁、铁、钾、钠、锡、镍、硅、锌含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1585.2-2022 |
Methods for chemical analysis of silver-tungsten alloys - Part 2: Determination of tungsten content - Cinchonine gravimetric method {译} 银钨合金化学分析方法 第2部分：钨含量的测定 辛可宁重量法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1585.1-2022 |
Methods for chemical analysis of silver-tungsten alloys - Part 1: Determination of silver content - Potentiometric titration {译} 银钨合金化学分析方法 第1部分：银含量的测定 电位滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 341.7-2022 |
Methods for chemical analysis of nickel concentrates - Part 7: Determination of silver content - Flame atomic absorption spectrometry {译} 镍精矿化学分析方法 第7部分：银含量的测定 火焰原子吸收光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 341.6-2022 |
Methods for chemical analysis of nickel concentrates - Part 6: Determination of gold, platinum and palladium content - Fire assay for gold enrichment - inductively coupled plasma atomic emission spectrometry {译} 镍精矿化学分析方法 第6部分：金、铂和钯含量的测定 火试金富集-电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1582.3-2022 |
Methods for chemical analysis of crude antimony - Part 3: Determination of arsenic, lead, copper, selenium and iron content - Inductively coupled plasma atomic emission spectrometry {译} 粗锑化学分析方法 第3部分：砷、铅、铜、硒和铁含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1582.2-2022 |
Methods for chemical analysis of crude antimony - Part 2: Determination of gold content - Fire test gold gravimetric method {译} 粗锑化学分析方法 第2部分：金含量的测定 火试金重量法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1582.1-2022 |
Methods for chemical analysis of crude antimony - Part 1: Determination of antimony content - Cerium sulfate titration method {译} 粗锑化学分析方法 第1部分：锑含量的测定 硫酸铈滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 536.14-2022 |
Methods for chemical analysis of bismuth - Part 14: Determination of copper, lead, zinc, iron, silver, arsenic, tellurium and antimony - Inductively coupled plasma atomic emission spectrometry {译} 铋化学分析方法 第14部分：铜、铅、锌、铁、银、砷、碲和锑含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 424.5-2022 |
Methods for chemical analysis of titanium diboride powder - Part 5: Determination of oxygen content - Pulse heating inert gas fusion - infrared absorption method {译} 二硼化钛粉化学分析方法 第5部分：氧含量的测定 脉冲加热惰气熔融-红外吸收法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 424.4-2022 |
Methods for chemical analysis of titanium diboride powder - Part 4: Determination of carbon content - High frequency combustion infrared absorption method {译} 二硼化钛粉化学分析方法 第4部分：碳含量的测定 高频燃烧红外吸收法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 424.3-2022 |
Methods for chemical analysis of titanium diboride powder - Part 3: Determination of iron content - 1,10-phenanthroline spectrophotometric method {译} 二硼化钛粉化学分析方法 第3部分：铁含量的测定 1,10-邻二氮杂菲分光光度法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 424.2-2022 |
Methods for chemical analysis of titanium diboride powder - Part 2: Determination of total boron content - Neutralization titration {译} 二硼化钛粉化学分析方法 第2部分：总硼含量的测定 中和滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 424.1-2022 |
Methods for chemical analysis of titanium diboride powder - Part 1: Determination of titanium content - Iron ammonium sulfate titration method {译} 二硼化钛粉化学分析方法 第1部分：钛含量的测定 硫酸铁铵滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1057.5-2022 |
Cobalt tetroxide Chemical analysis method - Part 5: Determination of carbon content - High frequency combustion - infrared absorption spectrometry {译} 四氧化三钴化学分析方法 第5部分：碳含量的测定 高频燃烧-红外吸收光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1057.4-2022 |
Methods for chemical analysis of cobalt tetroxide - Part 4: Determination of potassium and sodium content - Flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectrometry {译} 四氧化三钴化学分析方法 第4部分：钾和钠含量的测定 火焰原子吸收光谱法和电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1057.3-2022 |
Methods for chemical analysis of cobalt tetroxide - Part 3: Determination of silicon content - Inductively coupled plasma atomic emission spectrometry {译} 四氧化三钴化学分析方法 第3部分：硅含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1569.6-2022 |
Lithium nickel manganese oxide Chemical analysis methods - Part 6: Determination of potassium, sodium, calcium, iron, copper, chromium and cadmium content - Inductively coupled plasma atomic emission spectrometry {译} 镍锰酸锂化学分析方法 第6部分：钾、钠、钙、铁、铜、铬和镉含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1569.5-2022 |
Lithium nickel manganese oxide Chemical analysis method - Part 5: Determination of chloride ion content - Ion selective electrode method {译} 镍锰酸锂化学分析方法 第5部分：氯离子含量的测定 离子选择性电极法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1569.4-2022 |
Lithium nickel manganese oxide Chemical analysis method - Part 4: Determination of sulfate content - Ion chromatography {译} 镍锰酸锂化学分析方法 第4部分：硫酸根含量的测定 离子色谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1569.3-2022 |
Lithium nickel manganese oxide Chemical analysis methods - Part 3: Determination of lithium content - Flame atomic absorption spectrometry {译} 镍锰酸锂化学分析方法 第3部分：锂含量的测定 火焰原子吸收光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1569.2-2022 |
Lithium nickel manganese oxide Chemical analysis methods - Part 2: Determination of manganese content - Potentiometric titration {译} 镍锰酸锂化学分析方法 第2部分：锰含量的测定 电位滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1569.1-2022 |
Lithium nickel manganese oxide Chemical analysis method - Part 1: Determination of nickel content - Diacetyl diacetyl oxime gravimetric method {译} 镍锰酸锂化学分析方法 第1部分：镍含量的测定 丁二酮肟重量法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1550.5-2022 |
Methods for chemical analysis of beryllium alloys - Part 5: Determination of oxygen content - Inert gas fusion infrared absorption method {译} 铍合金化学分析方法 第5部分：氧含量的测定 惰气熔融红外吸收法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1550.4-2022 |
Methods for chemical analysis of beryllium alloys - Part 4: Determination of carbon content - Infrared absorption method {译} 铍合金化学分析方法 第4部分：碳含量的测定 红外吸收法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1550.3-2022 |
Methods for chemical analysis of beryllium alloys - Part 3: Determination of silicon content - Molybdenum blue spectrophotometric method {译} 铍合金化学分析方法 第3部分：硅含量的测定 钼蓝分光光度法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1550.2-2022 |
Methods for chemical analysis of beryllium alloys - Part 2: Determination of silver, cobalt and germanium content - Inductively coupled plasma atomic emission spectrometry {译} 铍合金化学分析方法 第2部分：银、钴和锗含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1550.1-2022 |
Methods for chemical analysis of beryllium alloys - Part 1: Determination of beryllium content - Potassium fluoride titration {译} 铍合金化学分析方法 第1部分：铍含量的测定 氟化钾滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1563.7-2022 |
Methods for chemical analysis of molybdenum-rhenium alloys - Part 7: Determination of hydrogen content - Inert gas fusion - infrared absorption method and thermal conductivity method {译} 钼铼合金化学分析方法 第7部分：氢含量的测定 惰性气体熔融-红外吸收法和热导法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1563.6-2022 |
Molybdenum-rhenium alloy Chemical analysis methods - Part 6: Determination of oxygen and nitrogen content - Inert gas fusion - infrared absorption method and thermal conductivity method {译} 钼铼合金化学分析方法 第6部分：氧和氮含量的测定 惰性气体熔融-红外吸收法和热导法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1563.5-2022 |
Molybdenum-rhenium alloy Chemical analysis method - Part 5: Determination of carbon and sulfur content - High frequency combustion infrared absorption method {译} 钼铼合金化学分析方法 第5部分：碳和硫含量的测定 高频燃烧红外吸收法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1563.4-2022 |
Molybdenum-rhenium alloy Chemical analysis methods - Part 4: Determination of aluminum, calcium, copper, iron, magnesium, manganese, nickel, tin, tungsten content - Inductively coupled plasma mass spectrometry {译} 钼铼合金化学分析方法 第4部分：铝、钙、铜、铁、镁、锰、镍、锡、钨含量的测定 电感耦合等离子体质谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1563.3-2022 |
Molybdenum-rhenium alloy Chemical analysis methods - Part 3: Determination of aluminum, calcium, copper, iron, magnesium, manganese, silicon, titanium content - Inductively coupled plasma atomic emission spectrometry {译} 钼铼合金化学分析方法 第3部分：铝、钙、铜、铁、镁、锰、硅、钛含量的测定 电感耦合等离子原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1563.2-2022 |
Methods for chemical analysis of molybdenum-rhenium alloys - Part 2: Determination of molybdenum content - Lead molybdate gravimetric method {译} 钼铼合金化学分析方法 第2部分：钼含量的测定 钼酸铅重量法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1563.1-2022 |
Methods for chemical analysis of molybdenum-rhenium alloys - Part 1: Determination of rhenium content - Inductively coupled plasma atomic emission spectrometry {译} 钼铼合金化学分析方法 第1部分：铼含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1562.4-2022 |
Methods for chemical analysis of tungsten copper alloys - Part 4: Determination of carbon content - High frequency combustion infrared absorption method {译} 钨铜合金化学分析方法 第4部分：碳含量的测定 高频燃烧红外吸收法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1562.3-2022 |
Methods for chemical analysis of tungsten-copper alloys - Part 3: Determination of cobalt, iron, nickel, zinc content - Inductively coupled plasma atomic emission spectrometry {译} 钨铜合金化学分析方法 第3部分：钴、铁、镍、锌含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1562.2-2022 |
Methods for chemical analysis of tungsten-copper alloys - Part 2: Determination of tungsten content - Cinchonine gravimetric method {译} 钨铜合金化学分析方法 第2部分：钨含量的测定 辛可宁重量法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1562.1-2022 |
Methods for chemical analysis of tungsten-copper alloys - Part 1: Determination of copper content - Iodometric method and inductively coupled plasma atomic emission spectrometry {译} 钨铜合金化学分析方法 第1部分：铜含量的测定 碘量法和电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1531-2022 |
Rhodium carbon Chemical analysis method - Determination of rhodium content - Inductively coupled plasma atomic emission spectrometry {译} 铑炭化学分析方法 铑含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1075.13-2022 |
Methods for chemical analysis of vanadium-aluminum and molybdenum-aluminum master alloys - Part 13: Determination of iron, silicon, molybdenum and chromium content - Inductively coupled plasma atomic emission spectrometry {译} 钒铝、钼铝中间合金化学分析方法 第13部分：铁、硅、钼、铬含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1075.12-2022 |
Methods for chemical analysis of vanadium-aluminum and molybdenum-aluminum master alloys-Part 12: Determination of phosphorus content-Molybdenum blue spectrophotometric method {译} 钒铝、钼铝中间合金化学分析方法 第12部分：磷含量的测定 钼蓝分光光度法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1075.11-2022 |
Methods for chemical analysis of vanadium-aluminum and molybdenum-aluminum master alloys—Part 11: Determination of nitrogen content—Inert gas fusion thermal conductivity method {译} 钒铝、钼铝中间合金化学分析方法 第11部分：氮含量的测定 惰性气体熔融热导法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1075.10-2022 |
Methods for chemical analysis of vanadium-aluminum and molybdenum-aluminum master alloys - Part 10: Determination of sodium content - Flame atomic absorption spectrometry {译} 钒铝、钼铝中间合金化学分析方法 第10部分：钠含量的测定 火焰原子吸收光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1075.9-2022 |
Methods for chemical analysis of vanadium-aluminum and molybdenum-aluminum master alloys - Part 9: Determination of chlorine content - silver chloride spectrophotometric method {译} 钒铝、钼铝中间合金化学分析方法 第9部分：氯含量的测定 氯化银分光光度法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1537.1-2022 |
Methods for chemical analysis of lithium boron alloys - Part 1: Determination of lithium content - Lithium sulfate weighing method {译} 锂硼合金化学分析方法 第1部分：锂含量的测定 硫酸锂称量法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1530-2022 |
High purity tin Chemical analysis method - Determination of impurity element content - Glow discharge mass spectrometry {译} 高纯锡化学分析方法 杂质元素含量的测定 辉光放电质谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1525-2022 |
Nickel-platinum alloy Chemical analysis method Determination of oxygen and nitrogen content Pulse-infrared absorption method and thermal conductivity detection method {译} 镍铂合金化学分析方法 氧和氮含量测定 脉冲-红外吸收法和热导检测法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1171.13-2021 |
Methods for chemical analysis of recycled zinc raw materials - Part 13: Determination of thallium content - Inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry{译} {译} 再生锌原料化学分析方法 第13部分：铊含量的测定 电感耦合等离子体质谱法和电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1171.12-2021 |
Methods for chemical analysis of recycled zinc raw materials - Part 12: Determination of indium content - Flame atomic absorption spectrometry{译} {译} 再生锌原料化学分析方法 第12部分：铟含量的测定 火焰原子吸收光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1512.9-2021 |
Methods for chemical analysis of copper smelting smoke and dust - Part 9: Determination of antimony content - Flame atomic absorption spectrometry{译} {译} 铜冶炼烟尘化学分析方法 第9部分：锑含量的测定 火焰原子吸收光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1512.8-2021 |
Methods for chemical analysis of copper smelting fumes - Part 8: Determination of silver and gold content - Flame atomic absorption spectrometry and fire assay{译} {译} 铜冶炼烟尘化学分析方法 第8部分：银和金含量的测定 火焰原子吸收光谱法和火试金法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1512.7-2021 |
Methods for chemical analysis of copper smelting smoke and dust - Part 7: Determination of cadmium content - Flame atomic absorption spectrometry and titration{译} {译} 铜冶炼烟尘化学分析方法 第7部分：镉含量的测定 火焰原子吸收光谱法和滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1512.6-2021 |
Methods for chemical analysis of copper smelting smoke and dust - Part 6: Determination of indium content - Flame atomic absorption spectrometry{译} {译} 铜冶炼烟尘化学分析方法 第6部分：铟含量的测定 火焰原子吸收光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1512.5-2021 |
Methods for chemical analysis of copper smelting dust - Part 5: Determination of arsenic content - Ferrous ammonium sulfate titration method{译} {译} 铜冶炼烟尘化学分析方法 第5部分：砷含量的测定 硫酸亚铁铵滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1512.4-2021 |
Methods for chemical analysis of copper smelting smoke and dust - Part 4: Determination of bismuth content - Flame atomic absorption spectrometry and Na2EDTA titration{译} {译} 铜冶炼烟尘化学分析方法 第4部分：铋含量的测定 火焰原子吸收光谱法和Na2EDTA滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1512.3-2021 |
Methods for chemical analysis of copper smelting smoke and dust - Part 3: Determination of zinc content - Flame atomic absorption spectrometry and Na2EDTA titration{译} {译} 铜冶炼烟尘化学分析方法 第3部分：锌含量的测定 火焰原子吸收光谱法和Na2EDTA滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1512.2-2021 |
Methods for chemical analysis of copper smelting smoke and dust - Part 2: Determination of lead content - Flame atomic absorption spectrometry and Na2EDTA titration{译} {译} 铜冶炼烟尘化学分析方法 第2部分：铅含量的测定 火焰原子吸收光谱法和Na2EDTA滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1512.1-2021 |
Methods for chemical analysis of copper smelting smoke and dust - Part 1: Determination of copper content - Flame atomic absorption spectrometry and iodometric method{译} {译} 铜冶炼烟尘化学分析方法 第1部分：铜含量的测定 火焰原子吸收光谱法和碘量法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 739.4-2021 |
Methods for chemical analysis of aluminium electrolytes - Part 4: Determination of alumina content - Gravimetric method {译} 铝电解质化学分析方法 第4部分：氧化铝含量的测定 重量法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 581.15-2021 |
Methods for chemical analysis and determination of physical properties of aluminium fluoride - Part 15: Determination of free alumina content {译} 氟化铝化学分析方法和物理性能测定方法 第15部分：游离氧化铝含量的测定 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 581.3-2021 |
Aluminum fluoride Chemical analysis method and physical property determination method? Part 3: Determination of fluorine content {译} 氟化铝化学分析方法和物理性能测定方法？第3部分：氟含量的测定 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 575.28-2021 |
Methods for chemical analysis of bauxite ores - Part 28: Determination of lithium oxide content - Flame atomic absorption spectrometry {译} 铝土矿石化学分析方法 第28部分：氧化锂含量的测定 火焰原子吸收光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 575.23-2021 |
Methods for chemical analysis of bauxite ores - Part 23: Determination of elemental content - X-ray fluorescence spectrometry {译} 铝土矿石化学分析方法 第23部分：元素含量的测定 X射线荧光光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 575.22-2021 |
Methods of chemical analysis of bauxite ores - Part 22: Determination of moisture content - gravimetric method {译} 铝土矿石化学分析方法 第22部分：湿存水含量的测定 重量法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 575.20-2021 |
Methods for chemical analysis of bauxite ores - Part 20: Preparation of pre-dried samples {译} 铝土矿石化学分析方法 第20部分：预先干燥试样的制备 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 575.19-2021 |
Methods for chemical analysis of bauxite ores - Part 19: Determination of loss on ignition - Gravimetric method {译} 铝土矿石化学分析方法 第19部分：灼减量的测定 重量法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 474-2021 |
High-purity gallium Chemical analysis method Determination of trace elements Inductively coupled plasma mass spectrometry {译} 高纯镓化学分析方法 痕量元素的测定 电感耦合等离子体质谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1416-2021 |
Methods for chemical analysis of nickelous oxide - Determination of copper, iron, zinc, calcium, magnesium, sodium, cobalt, cadmium, manganese and sulfur content - Inductively coupled plasma atomic emission spectrometry {译} 氧化亚镍化学分析方法 铜、铁、锌、钙、镁、钠、钴、镉、锰和硫含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| JC/T 1088-2021 |
Chemical analysis method of Phosphorus Slag in Granulated Electric Furnace{译} {译} 粒化电炉磷渣化学分析方法 |
China Building Material Industry
Standards Chemical analysis method |
English PDF |
| JC/T 911-2021 |
Chemical analysis method of fluorite for building materials{译} {译} 建材用萤石化学分析方法 |
China Building Material Industry
Standards Chemical analysis method |
English PDF |
| JC/T 874-2021 |
Method for chemical analysis of siliceous raw materials for cement{译} {译} 水泥用硅质原料化学分析方法 |
China Building Material Industry
Standards Chemical analysis method |
English PDF |
| JC/T 850-2021 |
Method for chemical analysis of ferrous raw materials for cement{译} {译} 水泥用铁质原料化学分析方法 |
China Building Material Industry
Standards Chemical analysis method |
English PDF |
| JC/T 312-2021 |
Chemical analysis method of alumite expansive cement{译} {译} 明矾石膨胀水泥化学分析方法 |
China Building Material Industry
Standards Chemical analysis method |
English PDF |
| YS/T 3042-2021 |
Method for chemical analysis of cyanide solution - Determination of gold content {译} 氰化液化学分析方法 金量的测定 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1314.7-2021 |
Chemical analysis method of copper smelting silver slag? Part 7: Determination of antimony content? Cerium sulfate titration{译} {译} 铜冶炼分银渣化学分析方法？第7部分：锑含量的测定？硫酸铈滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1314.6-2021 |
Chemical analysis method of copper smelting silver slag? Part 6: Determination of copper content? iodometry{译} {译} 铜冶炼分银渣化学分析方法？第6部分：铜含量的测定？碘量法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1348.7-2021 |
Chemical analysis method of lead smelting silver slag? Part 7: Determination of Arsenic Content Inductively Coupled Plasma Atomic Emission Spectrometry{译} {译} 铅冶炼分银渣化学分析方法？第7部分：砷含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1502-2021 |
Chemical analysis method of ruthenium compounds Determination of platinum, palladium, rhodium, iridium, gold, silver, copper, iron, nickel, magnesium, manganese, lead, zinc, calcium, sodium content Inductively coupled plasma atomic emission spectrometry{译 {译} 钌化合物化学分析方法 铂、钯、铑、铱、金、银、铜、铁、镍、镁、锰、铅、锌、钙、钠含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1495-2021 |
High-purity rhodium Chemical analysis method - Determination of impurity element content - Glow discharge mass spectrometry{译} {译} 高纯铑化学分析方法 杂质元素含量的测定 辉光放电质谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1494-2021 |
High-purity gold Chemical analysis method - Determination of impurity element content - Glow discharge mass spectrometry{译} {译} 高纯金化学分析方法 杂质元素含量的测定 辉光放电质谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1493-2021 |
High-purity platinum Chemical analysis method - Determination of impurity element content - Glow discharge mass spectrometry{译} {译} 高纯铂化学分析方法 杂质元素含量的测定 辉光放电质谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1489.8-2021 |
Methods for chemical analysis of cobalt-chromium-tungsten alloy powders-Part 8: Determination of oxygen content-Pulse heating inert gas fusion-infrared absorption method{译} {译} 钴铬钨系合金粉末化学分析方法 第8部分：氧含量的测定 脉冲加热惰气熔融-红外吸收法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1489.7-2021 |
Methods for chemical analysis of cobalt-chromium-tungsten alloy powders-Part 7: Determination of carbon content-High-frequency combustion infrared absorption method{译} {译} 钴铬钨系合金粉末化学分析方法 第7部分：碳含量的测定 高频燃烧红外吸收法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1489.6-2021 |
Methods for chemical analysis of cobalt-chromium-tungsten alloy powders-Part 6: Determination of iron and manganese content-Inductively coupled plasma atomic emission spectrometry{译} {译} 钴铬钨系合金粉末化学分析方法 第6部分：铁、锰含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1489.5-2021 |
Methods for chemical analysis of cobalt-chromium-tungsten alloy powders-Part 5: Determination of silicon content-Molybdenum blue spectrophotometry{译} {译} 钴铬钨系合金粉末化学分析方法 第5部分：硅含量的测定 钼蓝分光光度法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1489.4-2021 |
Methods for chemical analysis of cobalt-chromium-tungsten alloy powders-Part 4: Determination of nickel content-Diacetyl oxime spectrophotometry{译} {译} 钴铬钨系合金粉末化学分析方法 第4部分：镍含量的测定 丁二酮肟分光光度法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1489.3-2021 |
Methods for chemical analysis of cobalt-chromium-tungsten alloy powders - Part 3: Determination of tungsten content - Inductively coupled plasma atomic emission spectrometry{译} {译} 钴铬钨系合金粉末化学分析方法 第3部分：钨含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1489.2-2021 |
Methods for chemical analysis of cobalt-chromium-tungsten alloy powders - Part 2: Determination of chromium content - ammonium ferrous sulfate titration method{译} {译} 钴铬钨系合金粉末化学分析方法 第2部分：铬含量的测定 硫酸亚铁铵滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1489.1-2021 |
Methods for chemical analysis of cobalt chromium tungsten alloy powders - Part 1: Determination of cobalt content - Potentiometric titration method{译} {译} 钴铬钨系合金粉末化学分析方法 第1部分：钴含量的测定 电位滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 426.6-2021 |
Antimony beryllium pellet Chemical analysis method? Part 6: Determination of beryllium oxide content? Inductively Coupled Plasma Atomic Emission Spectroscopy{译} {译} 锑铍芯块化学分析方法 ？第6部分:氧化铍含量的测定 ？电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 426.5-2021 |
Antimony beryllium pellet Chemical analysis method? Part 5: Determination of silicon content? Inductively Coupled Plasma Atomic Emission Spectroscopy{译} {译} 锑铍芯块化学分析方法 ？第5部分:硅含量的测定 ？电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1476-2021 |
Chemical analysis method of zircon sand? Determination of barium content ? Inductively Coupled Plasma Atomic Emission Spectroscopy{译} {译} 锆英砂化学分析方法 ？钡含量的测定 ？电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1473-2021 |
High-purity molybdenum Chemical analysis method? Determination of trace impurity elements ? glow discharge mass spectrometry{译} {译} 高纯钼化学分析方法 ？痕量杂质元素的测定 ？辉光放电质谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1472.6-2021 |
Chemical analysis method of lithium-rich manganese-based cathode materials? Part 6: Determination of sulfate content? ion chromatography{译} {译} 富锂锰基正极材料化学分析方法？ 第6部分：硫酸根含量的测定？ 离子色谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1472.5-2021 |
Chemical analysis method of lithium-rich manganese-based cathode materials? Part 5: Determination of chlorine content Silver chloride turbidimetric method{译} {译} 富锂锰基正极材料化学分析方法？ 第5部分：氯含量的测定 氯化银比浊法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1472.4-2021 |
Chemical analysis method of lithium-rich manganese-based cathode materials? Part 4: Determination of lithium, nickel, cobalt, sodium, potassium, copper, calcium, iron, magnesium, zinc, aluminum, silicon content? Inductively Coupled Plasma Atomic Emission {译} 富锂锰基正极材料化学分析方法？ 第4部分：锂、镍、钴、钠、钾、铜、钙、铁、镁、锌、铝、硅含量的测定？ 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1472.3-2021 |
Chemical analysis method of lithium-rich manganese-based cathode materials? Part 3: Determination of nickel content - dimethylglyoxime gravimetric method{译} {译} 富锂锰基正极材料化学分析方法？ 第3部分：镍含量的测定 丁二酮肟重量法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1472.2-2021 |
Chemical analysis method of lithium-rich manganese-based cathode materials? Part 2: Determination of cobalt content Potentiometric titration{译} {译} 富锂锰基正极材料化学分析方法？ 第2部分：钴含量的测定 电位滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1472.1-2021 |
Chemical analysis method of lithium-rich manganese-based cathode materials? Part 1: Determination of manganese content Potentiometric titration{译} {译} 富锂锰基正极材料化学分析方法？ 第1部分：锰含量的测定 电位滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1467.12-2021 |
Methods for chemical analysis of hafnium - Part 12: Determination of trace impurity elements{译} {译} 铪化学分析方法 第12部分：痕量杂质元素的测定 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1467.11-2021 |
Methods for chemical analysis of hafnium - Part 11: Determination of carbon content{译} {译} 铪化学分析方法 第11部分：碳量的测定 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1467.10-2021 |
Methods for chemical analysis of hafnium - Part 10: Determination of oxygen and nitrogen content{译} {译} 铪化学分析方法 第10部分：氧量、氮量的测定 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1467.9-2021 |
Methods for chemical analysis of hafnium - Part 9: Determination of hydrogen content{译} {译} 铪化学分析方法 第9部分：氢量的测定 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1467.8-2021 |
Methods for chemical analysis of hafnium - Part 8: Determination of sodium content{译} {译} 铪化学分析方法 第8部分：钠量的测定 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1467.7-2021 |
Methods for chemical analysis of hafnium - Part 7: Determination of silicon content{译} {译} 铪化学分析方法 第7部分：硅量的测定 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1467.6-2021 |
Methods for chemical analysis of hafnium - Part 6: Determination of phosphorus content{译} {译} 铪化学分析方法 第6部分：磷量的测定 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1467.5-2021 |
Methods for chemical analysis of hafnium - Part 5: Determination of cadmium{译} {译} 铪化学分析方法 第5部分：镉量的测定 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1467.4-2021 |
Methods for chemical analysis of hafnium - Part 4: Determination of chlorine content{译} {译} 铪化学分析方法 第4部分：氯量的测定 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1467.3-2021 |
Methods for chemical analysis of hafnium - Part 3: Determination of boron content{译} {译} 铪化学分析方法 第3部分：硼量的测定 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1467.2-2021 |
Methods for chemical analysis of hafnium - Part 2: Determination of the amount of uranium{译} {译} 铪化学分析方法 第2部分：铀量的测定 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1467.1-2021 |
Methods for chemical analysis of hafnium - Part 1: Determination of lead content{译} {译} 铪化学分析方法 第1部分：铅量的测定 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1466-2021 |
Sampling method for chemical composition analysis of zirconium and zirconium alloys{译} {译} 锆及锆合金化学成分分析取制样方法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1464-2021 |
Methods for chemical analysis of niobium-tungsten alloys - Determination of tungsten, molybdenum, zirconium, tantalum, silicon, iron, aluminum, titanium and copper{译} {译} 铌钨合金化学分析方法 钨、钼、锆、钽、硅、铁、铝、钛、铜量的测定 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 461.11-2021 |
Methods for chemical analysis of mixed lead-zinc concentrates - Part 11: Determination of arsenic, bismuth, cadmium, cobalt, copper, nickel and antimony content - Inductively coupled plasma atomic emission spectrometry{译} {译} 混合铅锌精矿化学分析方法 第11部分：砷、铋、镉、钴、铜、镍和锑含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1345.7-2021 |
Chemical analysis methods for high bismuth and lead - Part 7: Determination of copper, iron, nickel, cadmium, arsenic, antimony and bismuth content - Inductively coupled plasma atomic emission spectrometry{译} {译} 高铋铅化学分析方法 第7部分：铜、铁、镍、镉、砷、锑、铋含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1462.5-2021 |
Methods for chemical analysis of crude tin - Part 5: Determination of antimony content - Flame atomic absorption spectrometry and cerium sulfate titration{译} {译} 粗锡化学分析方法 第5部分：锑含量的测定 火焰原子吸收光谱法和硫酸铈滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1462.4-2021 |
Methods for chemical analysis of crude tin - Part 4: Determination of bismuth content - Flame atomic absorption spectrometry and Na2EDTA titration{译} {译} 粗锡化学分析方法 第4部分：铋含量的测定 火焰原子吸收光谱法和Na2EDTA滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1462.3-2021 |
Methods for chemical analysis of crude tin - Part 3: Determination of copper content - Flame atomic absorption spectrometry and iodometry{译} {译} 粗锡化学分析方法 第3部分：铜含量的测定 火焰原子吸收光谱法和碘量法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1462.2-2021 |
Methods for chemical analysis of crude tin - Part 2: Determination of lead content - Flame atomic absorption spectrometry and Na2EDTA titration{译} {译} 粗锡化学分析方法 第2部分：铅含量的测定 火焰原子吸收光谱法和Na2EDTA滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1462.1-2021 |
Methods for chemical analysis of crude tin - Part 1: Determination of tin content - Potassium iodate titration method{译} {译} 粗锡化学分析方法 第1部分：锡含量的测定 碘酸钾滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1461-2021 |
Bismuth yellow Chemical analysis method? Determination of bismuth content by Na2EDTA volumetric method{译} {译} 铋黄化学分析方法？铋含量的测定 Na2EDTA容量法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1445.5-2021 |
Methods for chemical analysis of nickel-cobalt-aluminum three-element composite hydroxides-Part 5: Determination of sulfate ion content-Barium sulfate turbidimetric method{译} {译} 镍钴铝三元素复合氢氧化物化学分析方法 第5部分：硫酸根离子含量的测定 硫酸钡比浊法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1445.4-2021 |
Methods for chemical analysis of nickel-cobalt-aluminum tri-element composite hydroxides-Part 4: Determination of chloride ion content-Silver chloride turbidimetric method{译} {译} 镍钴铝三元素复合氢氧化物化学分析方法 第4部分：氯离子含量的测定 氯化银比浊法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1445.3-2021 |
Methods for chemical analysis of nickel-cobalt-aluminum three-element composite hydroxides-Part 3: Determination of aluminum, copper, iron, zinc, calcium, magnesium, sodium and manganese content-Inductively coupled plasma atomic emission spectrometry{译} {译} 镍钴铝三元素复合氢氧化物化学分析方法 第3部分：铝、铜、铁、锌、钙、镁、钠、锰含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1445.2-2021 |
Methods for chemical analysis of nickel-cobalt-aluminum tri-element composite hydroxides-Part 2: Determination of cobalt content Potentiometric titration method{译} {译} 镍钴铝三元素复合氢氧化物化学分析方法 第2部分：钴含量的测定 电位滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1445.1-2021 |
Methods for chemical analysis of nickel-cobalt-aluminum tri-element composite hydroxides-Part 1: Determination of nickel content-Diacetyl oxime gravimetric method{译} {译} 镍钴铝三元素复合氢氧化物化学分析方法 第1部分：镍含量的测定 丁二酮肟重量法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| HG/T 5910-2021 |
Analysis method of chemical composition of bimetal supported polyether polyol synthesis catalyst{译} {译} 双金属负载型聚醚多元醇合成催化剂化学成分分析方法 |
China Chemistry Industry
Standards Chemical analysis method |
English PDF |
| HG/T 5909-2021 |
Analysis method of chemical composition of meropenem synthesis catalyst{译} {译} 美罗培南合成催化剂化学成分分析方法 |
China Chemistry Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1509.3-2021 |
Chemical analysis method of silicon carbon composite anode material? Part 3: Determination of iron, nickel, zirconium, calcium, lead, aluminium, hafnium content? Inductively Coupled Plasma Atomic Emission Spectroscopy{译} {译} 硅碳复合负极材料化学分析方法？第3部分：铁、镍、锆、钙、铅、铝、铪含量的测定？电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1509.2-2021 |
Methods for chemical analysis of silicon-carbon composite anode materials - Part 2: Determination of carbon content - High frequency heating infrared absorption method{译} {译} 硅碳复合负极材料化学分析方法 第2部分：碳含量的测定 高频加热红外吸收法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1509.1-2021 |
Methods for chemical analysis of silicon-carbon composite anode materials - Part 1: Determination of silicon content - gravimetric and spectrophotometric methods{译} {译} 硅碳复合负极材料化学分析方法 第1部分：硅含量的测定 重量法和分光光度法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1506-2021 |
High-purity iridium Chemical analysis method? Determination of impurity element content? glow discharge mass spectrometry{译} {译} 高纯铱化学分析方法？杂质元素含量的测定？辉光放电质谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1505-2021 |
High-purity ruthenium Chemical analysis method? Determination of impurity element content? glow discharge mass spectrometry{译} {译} 高纯钌化学分析方法？杂质元素含量的测定？辉光放电质谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1504-2021 |
High-purity palladium Chemical analysis method? Determination of impurity element content? glow discharge mass spectrometry{译} {译} 高纯钯化学分析方法？杂质元素含量的测定？辉光放电质谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 445.18-2021 |
What is the Chemical analysis method of silver concentrate? Part 18: Determination of iron content? Na2EDTA titration{译} {译} 银精矿化学分析方法？第18部分：铁含量的测定？Na2EDTA 滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 445.17-2021 |
What is the Chemical analysis method of silver concentrate? Part 17: Determination of silica content? Molybdenum Blue Spectrophotometry{译} {译} 银精矿化学分析方法？第17部分：二氧化硅含量的测定？钼蓝分光光度法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1314.8-2021 |
Chemical analysis method of copper smelting silver slag? Part 8: Determination of bismuth content? Na2EDTA titration{译} {译} 铜冶炼分银渣化学分析方法？第8部分：铋含量的测定？Na2EDTA滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| SN/T 5290-2021 |
Quantitative chemical analysis of the mixture of feather down and polyester fiber for import and export - Sodium hypochlorite method{译} {译} 进出口羽毛绒与聚酯纤维混合物成分定量化学分析 次氯酸钠法 |
China Import&Export Inspection Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1348.6-2020 |
Methods for chemical analysis of lead smelting silver slag - Part 6: Determination of lead, copper, antimony and bismuth content - Inductively coupled plasma atomic emission spectrometry {译} 铅冶炼分银渣化学分析方法 第6部分：铅、铜、锑和铋含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1348.5-2020 |
Methods for chemical analysis of lead smelting silver slag - Part 5: Determination of bismuth content - Flame atomic absorption spectrometry and Na2EDTA titration {译} 铅冶炼分银渣化学分析方法 第5部分：铋含量的测定 火焰原子吸收光谱法和Na2EDTA滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1348.4-2020 |
Methods for chemical analysis of lead smelting silver slag - Part 4: Determination of antimony content - Flame atomic absorption spectrometry and cerium sulfate titration {译} 铅冶炼分银渣化学分析方法 第4部分：锑含量的测定 火焰原子吸收光谱法和硫酸铈滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1348.3-2020 |
Methods for chemical analysis of lead smelting silver slag - Part 3: Determination of copper content - Flame atomic absorption spectrometry and iodometric method {译} 铅冶炼分银渣化学分析方法 第3部分：铜含量的测定 火焰原子吸收光谱法和碘量法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1348.2-2020 |
Methods for chemical analysis of lead smelting silver slag - Part 2: Determination of lead content - Flame atomic absorption spectrometry and Na2EDTA titration {译} 铅冶炼分银渣化学分析方法 第2部分：铅含量的测定 火焰原子吸收光谱法和Na2EDTA滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1348.1-2020 |
Methods for chemical analysis of silver slag from lead smelting - Part 1: Determination of gold and silver content - Fire assay method {译} 铅冶炼分银渣化学分析方法 第1部分：金和银含量的测定 火试金法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1347-2020 |
Methods for chemical analysis of high-purity hafnium-Determination of trace impurity elements-Glow discharge mass spectrometry {译} 高纯铪化学分析方法 痕量杂质元素含量的测定 辉光放电质谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 833-2020 |
Ammonium rhenate Chemical analysis method Determination of beryllium, magnesium, aluminum, potassium, calcium, titanium, chromium, manganese, iron, cobalt, copper, zinc, molybdenum, lead, tungsten, sodium, tin, nickel, silicon content Inductively coupled {译} 铼酸铵化学分析方法 铍、镁、铝、钾、钙、钛、铬、锰、铁、钴、铜、锌、钼、铅、钨、钠、锡、镍、硅量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1047.13-2020 |
Methods for chemical analysis of copper magnetite - Part 13: Determination of mercury content - Direct determination by solid injection and cold atomic absorption spectrometry {译} 铜磁铁矿化学分析方法 第13部分：汞含量的测定 固体进样直接测定法和冷原子吸收光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1047.12-2020 |
Methods for chemical analysis of copper magnetite - Part 12: Determination of sulfur content - Inductively coupled plasma atomic emission spectrometry {译} 铜磁铁矿化学分析方法 第12部分：硫含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1346-2020 |
Method for chemical analysis of copper and arsenic filter cakes - Determination of rhenium content - Inductively coupled plasma atomic emission spectrometry {译} 铜砷滤饼化学分析方法 铼含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 341.5-2020 |
Methods for chemical analysis of nickel concentrates - Part 5: Determination of copper, lead, zinc, magnesium, cadmium and arsenic content - Inductively coupled plasma atomic emission spectrometry {译} 镍精矿化学分析方法 第5部分： 铜、铅、锌、镁、镉和砷含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1345.6-2020 |
Chemical analysis methods for high bismuth and lead - Part 6: Determination of tin content - Potassium iodate titration method {译} 高铋铅化学分析方法 第6部分：锡含量的测定 碘酸钾滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1345.5-2020 |
Methods for chemical analysis of high bismuth and lead - Part 5: Determination of copper content - Flame atomic absorption spectrometry {译} 高铋铅化学分析方法 第5部分：铜含量的测定 火焰原子吸收光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1345.4-2020 |
Methods for chemical analysis of high bismuth and lead - Part 4: Determination of antimony content - Flame atomic absorption spectrometry and cerium sulfate titration {译} 高铋铅化学分析方法 第4部分：锑含量的测定 火焰原子吸收光谱法和硫酸铈滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1345.3-2020 |
Methods for chemical analysis of high bismuth and lead - Part 3: Determination of gold and silver content - Fire assay gravimetric method {译} 高铋铅化学分析方法 第3部分：金和银含量的测定 火试金重量法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1345.2-2020 |
Chemical analysis methods for high bismuth and lead - Part 2: Determination of bismuth content - Na2EDTA titration method {译} 高铋铅化学分析方法 第2部分：铋含量的测定 Na2EDTA滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1345.1-2020 |
Methods for chemical analysis of high bismuth and lead - Part 1: Determination of lead content - Na2EDTA titration method {译} 高铋铅化学分析方法 第1部分：铅含量的测定 Na2EDTA滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1344.3-2020 |
Chemical analysis method of tin-doped indium oxide powder-Part 3: Phase analysis X-ray diffraction analysis method {译} 掺锡氧化铟粉化学分析方法 第3部分：物相分析 X射线衍射分析法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1344.2-2020 |
Methods for chemical analysis of tin-doped indium oxide powder - Part 2: Determination of silicon content - Molybdenum blue photometric method {译} 掺锡氧化铟粉化学分析方法 第2部分：硅含量的测定 钼蓝光度法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1344.1-2020 |
Methods for chemical analysis of tin-doped indium oxide powder - Part 1: Determination of iron, aluminum, lead, nickel, copper, cadmium, chromium and thallium content - Inductively coupled plasma atomic emission spectrometry {译} 掺锡氧化铟粉化学分析方法 第1部分：铁、铝、铅、镍、铜、镉、铬和铊含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 252.8-2020 |
Methods for chemical analysis of high nickel sulfonium - Part 8: Determination of gold, platinum and palladium content - gold enrichment by fire assay - inductively coupled plasma atomic emission spectrometry {译} 高镍锍化学分析方法 第8部分：金、铂和钯含量的测定 火试金富集-电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 252.7-2020 |
Methods for chemical analysis of high nickel sulfonium - Part 7: Determination of silver content - Flame atomic absorption spectrometry {译} 高镍锍化学分析方法 第7部分：银含量的测定 火焰原子吸收光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 252.6-2020 |
Methods for chemical analysis of high nickel mattes - Part 6: Determination of lead, zinc and arsenic content - Inductively coupled plasma atomic emission spectrometry {译} 高镍锍化学分析方法 第6部分：铅、锌和砷含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1057.2-2020 |
Methods for chemical analysis of cobalt tetroxide - Part 2: Determination of chloride ion content - Ion selective electrode method {译} 四氧化三钴化学分析方法 第2部分：氯离子含量的测定 离子选择性电极法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 806-2020 |
Methods for chemical analysis of aluminum and aluminum alloys - Determination of element content - X-ray fluorescence spectrometry {译} 铝及铝合金化学分析方法 元素含量的测定 X射线荧光光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| HG/T 5762-2020 |
Analysis method of chemical composition of chromium-based ethylene polymerization catalyst {译} 铬系乙烯聚合催化剂化学成分分析方法 |
China Chemistry Industry
Standards Chemical analysis method |
English PDF |
| HG/T 5757-2020 |
Analysis method of chemical composition of aluminum-based hydrogenation catalyst {译} 铝基加氢催化剂化学成分分析方法 |
China Chemistry Industry
Standards Chemical analysis method |
English PDF |
| HG/T 5756-2020 |
Analysis method of chemical composition of catalyst for selective hydrogenation of benzene to cyclohexene {译} 苯选择性加氢制环己烯催化剂化学成分分析方法 |
China Chemistry Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1396.2-2020 |
Methods for chemical analysis of platinum dichlorotetrammine - Part 2: Determination of magnesium, calcium, iron, nickel, copper, rhodium, palladium, silver, iridium, gold and lead content - Inductively coupled plasma atomic emission spectrometry {译} 二氯四氨铂化学分析方法 第2部分：镁、钙、铁、镍、铜、铑、钯、银、铱、金、铅含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1396.1-2020 |
Methods for chemical analysis of dichlorotetraammine platinum - Part 1: Determination of platinum content - gravimetric method {译} 二氯四氨铂化学分析方法 第1部分：铂含量的测定 重量法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1395.2-2020 |
Methods for chemical analysis of palladium dichlorodiamine-Part 2: Determination of silver, gold, platinum, rhodium, iridium, lead, nickel, copper, iron, tin, chromium content-Inductively coupled plasma atomic emission spectrometry {译} 二氯二氨钯化学分析方法 第2部分：银、金、铂、铑、铱、铅、镍、铜、铁、锡、铬含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1395.1-2020 |
Methods for chemical analysis of dichlorodiamine palladium - Part 1: Determination of palladium content - Hydrazine hydrate reduction gravimetric method {译} 二氯二氨钯化学分析方法 第1部分：钯含量的测定 水合肼还原重量法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 832-2020 |
Method for chemical analysis of spent catalysts for butanol-octanol-Determination of rhodium content-Inductively coupled plasma atomic emission spectrometry {译} 丁辛醇废催化剂化学分析方法 铑含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 955.3-2020 |
Methods for chemical analysis of crude silver - Part 3: Determination of gold content - Gold enrichment by fire assay - Inductively coupled plasma atomic emission spectrometry {译} 粗银化学分析方法 第3部分：金含量的测定 火试金富集-电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 445.16-2020 |
Methods for chemical analysis of silver concentrates - Part 16: Determination of fluorine and chlorine content - Ion chromatography {译} 银精矿化学分析方法 第16部分：氟和氯含量的测定 离子色谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1382-2020 |
Method for chemical analysis of silver-copper-phosphorus alloys-Determination of phosphorus content-Phosphorus molybdenum yellow spectrophotometry {译} 银铜磷合金化学分析方法 磷含量的测定 磷钼黄分光光度法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1381-2020 |
Methods for chemical analysis of rhodium compounds - Determination of arsenic content - Atomic fluorescence spectrometry {译} 铑化合物化学分析方法 砷含量的测定 原子荧光光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1380-2020 |
Methods for chemical analysis of rhodium compounds - Determination of chloride and nitrate ions - Ion chromatography {译} 铑化合物化学分析方法 氯离子、硝酸根离子含量的测定 离子色谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1379-2020 |
Chemical analysis method of pure platinum Determination of palladium, rhodium, iridium, ruthenium, gold, silver, aluminum, bismuth, chromium, copper, iron, nickel, lead, magnesium, manganese, tin, zinc, silicon content Inductively coupled plasma atomic em {译} 纯铂化学分析方法 钯、铑、铱、钌、金、银、铝、铋、铬、铜、铁、镍、铅、镁、锰、锡、锌、硅含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1378-2020 |
Chemical analysis method of pure palladium Determination of platinum, rhodium, iridium, ruthenium, gold, silver, aluminum, bismuth, chromium, copper, iron, nickel, lead, magnesium, manganese, tin, zinc, silicon content Inductively coupled plasma atomic em {译} 纯钯化学分析方法 铂、铑、铱、钌、金、银、铝、铋、铬、铜、铁、镍、铅、镁、锰、锡、锌、硅含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 1363-2020 |
Chemical analysis method of tellurium dioxide - Determination of copper, silver, magnesium, nickel, zinc, calcium, iron, bismuth, selenium, lead, sodium, antimony and arsenic content - Inductively coupled plasma atomic emission spectrometry {译} 二氧化碲化学分析方法 铜、银、镁、镍、锌、钙、铁、铋、硒、铅、钠、锑和砷含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 739.3-2020 |
Methods for chemical analysis of aluminum electrolytes - Part 3: Determination of sodium, calcium, magnesium, potassium and lithium elements - Inductively coupled plasma atomic emission spectrometry {译} 铝电解质化学分析方法 第3部分：钠、钙、镁、钾、锂元素含量的测定 电感耦合等离子体原子发射光谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 739.2-2020 |
Methods for chemical analysis of aluminium electrolytes - Part 2: Determination of molecular ratios - Aluminium trichloride titration method {译} 铝电解质化学分析方法 第2部分：分子比的测定 三氯化铝滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 535.11-2020 |
Methods for chemical analysis of sodium fluoride - Part 11: Determination of sodium fluorosilicate content - Acid-base titration {译} 氟化钠化学分析方法 第11部分：氟硅酸钠含量的测定 酸碱滴定法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 575.26-2020 |
Methods for chemical analysis of bauxite ores - Part 26: Determination of sulfate content - barium sulfate gravimetric method {译} 铝土矿石化学分析方法 第26部分：硫酸根含量的测定 硫酸钡重量法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 870-2020 |
Methods for chemical analysis of pure aluminum - Determination of trace impurity elements - Inductively coupled plasma mass spectrometry {译} 纯铝化学分析方法 痕量杂质元素含量的测定 电感耦合等离子体质谱法 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| YS/T 575.21-2020 |
Methods for chemical analysis of bauxite ores - Part 21: Determination of organic carbon content {译} 铝土矿石化学分析方法 第21部分：有机碳含量的测定 |
China Non-ferrous Metal Industry
Standards Chemical analysis method |
English PDF |
| Find out:286Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
