Cart:
Keyword:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| HB 8626-2021 |
Airborne temperature sensor performance test requirements: static indication error, recovery characteristics, dynamic response and temperature measurement deviation {译} 机载温度传感器性能测试要求 静态示值误差、恢复特性、动态响应与测温偏差 |
China Aviation Industry
Standards Performance requirement |
 English PDF |
| HB 8618-2021 |
Performance testing requirements for fiber Bragg grating strain sensors used in aviation {译} 航空用光纤光栅应变传感器性能测试要求 |
China Aviation Industry
Standards Performance requirement |
English PDF |
| HB 8582-2020 |
Low-speed wind tunnel pressure test requirements for airfoil aerodynamic performance {译} 翼型气动性能低速风洞测压试验要求 |
China Aviation Industry
Standards Performance requirement |
English PDF |
| HB 8498-2014(2017) |
Civil aircraft landing gear system performance test verification requirements {译} 民用飞机起落架系统性能试验验证要求 |
China Aviation Industry
Standards Performance requirement |
English PDF |
| HB 5470-2014(2017) |
Combustion Performance requirements for non-metallic materials inside civil aircraft cabins HB 5470-1991 {译} 民用飞机机舱内部非金属材料燃烧性能要求 |
China Aviation Industry
Standards Performance requirement |
English PDF |
| YD/T 1484.1-2023 |
Wireless terminal space radio frequency radiated power and receiver performance measurement methods Part 1: General requirements {译} 无线终端空间射频辐射功率和接收机性能测量方法 第1部分：通用要求 |
China Telecommunication Industry
Standards Performance requirement |
English PDF |
| YY 1277—2023 |
Pressure steam sterilizer biosafety Performance requirements {译} 压力蒸汽灭菌器 生物安全性能要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YC/T 600-2023 |
General Performance requirements for cigarette frame papers {译} 烟用框架纸通用性能要求 |
China Tobacco Industry
Standards Performance requirement |
English PDF |
| YY 0601-2009 |
Medical electrical equipment - Particular requirements for basic safety and main performance of respiratory gas monitors {译} 医用电气设备 呼吸气体监护仪的基本安全和主要性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YD/T 4290-2023 |
5G network management technical requirements Performance measurement data requirements {译} 5G网络管理技术要求 性能测量数据要求 |
China Telecommunication Industry
Standards Performance requirement |
English PDF |
| YD/T 4288-2023 |
5G network management technical requirements Key performance indicators {译} 5G网络管理技术要求 关键性能指标 |
China Telecommunication Industry
Standards Performance requirement |
English PDF |
| GY/T 373-2023 |
High-performance microphone technical requirements and measurement methods {译} 高性能传声器技术要求和测量方法 |
China Radio, Film and TV Industry
Standards Performance requirement |
English PDF |
| YY/T 1302.2—2015 |
Physical and microbiological Performance requirements for ethylene oxide sterilization - Part 2: Microbiological requirements {译} 环氧乙烷灭菌的物理和微生物性能要求 第2部分：微生物要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY/T 1302.1—2015 |
Physical and microbiological Performance requirements for ethylene oxide sterilization - Part 1: Physical requirements {译} 环氧乙烷灭菌的物理和微生物性能要求 第1部分：物理要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.284-2023 |
Medical electrical equipment - Part 2-84: Particular requirements for basic safety and essential performance of ventilators for use in emergency medical service environments {译} 医用电气设备 第2-84部分：紧急医疗服务环境用呼吸机的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.280-2023 |
Medical electrical equipment - Part 2-80: Particular requirements for basic safety and essential performance of respiratory support equipment for respiratory insufficiency {译} 医用电气设备 第2-80部分：用于呼吸功能不全的呼吸支持设备的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.279-2023 |
Medical Electrical Equipment Part 2-79: Particular Requirements for Basic Safety and Essential Performance of Respiratory Support Equipment for Respiratory Impairments {译} 医用电气设备 第2-79部分：用于呼吸功能障碍的呼吸支持设备的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.278-2023 |
Medical electrical equipment - Part 2-78: Particular requirements for the basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or mitigation {译} 医用电气设备 第2-78部分：康复、评定、代偿或缓解用医用机器人的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.256-2023 |
Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for temperature measurement {译} 医用电气设备 第2-56部分：用于体温测量的临床体温计的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.231-2023 |
Medical electrical equipment - Part 2-31: Particular requirements for basic safety and essential performance of external cardiac pacemakers with internal power supply {译} 医用电气设备 第2-31部分：带内部电源的体外心脏起搏器的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| JT/T 1459-2023 |
Performance requirements and test procedures for low-speed following system of commercial vehicles {译} 营运车辆低速跟随系统性能要求和测试规程 |
China Transport Industry
Standards Performance requirement |
English PDF |
| JT/T 1458-2023 |
Performance requirements and detection methods of vehicle-to-road/vehicle-to-vehicle communication (V2X) terminals for operating vehicles {译} 营运车辆车路/车车通信（V2X）终端性能要求和检测方法 |
China Transport Industry
Standards Performance requirement |
English PDF |
| NY/T 4182-2022 |
Technical parameters and Performance requirements of monitoring equipment for crop diseases and insect pests {译} 农作物病虫害监测设备技术参数与性能要求 |
China Agriculture Industry
Standards Performance requirement |
English PDF |
| YY 9706.277-2023 |
Medical electrical equipment - Part 2-77: Particular requirements for basic safety and essential performance of robotically assisted surgical equipment {译} 医用电气设备 第2-77部分：采用机器人技术的辅助手术设备的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.261-2023 |
Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximetry equipment {译} 医用电气设备 第2-61部分:脉搏血氧设备的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.249-2023 |
Medical electrical equipment - Part 2-49: Particular requirements for basic safety and essential performance of multiparameter patient monitors {译} 医用电气设备 第2-49部分:多参数患者监护仪的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.246-2023 |
Medical electrical equipment - Part 2-46: Particular requirements for basic safety and essential performance of operating tables {译} 医用电气设备 第2-46部分: 手术台的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.230-2023 |
Medical electrical equipment - Part 2-30: Particular requirements for basic safety and essential performance of automatic non-invasive sphygmomanometers {译} 医用电气设备 第2-30部分:自动无创血压计的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| QC/T 1168-2022 |
Performance requirements and bench test methods of electric air compressors for automobiles {译} 汽车用电动空气压缩机性能要求及台架试验方法 |
China Automobile Industry
Standards Performance requirement |
English PDF |
| QC/T 1172-2022 |
Performance requirements and bench test methods for exhaust mufflers used in automotive air brake components {译} 汽车气压制动部件用排气消音器性能要求及台架试验方法 |
China Automobile Industry
Standards Performance requirement |
English PDF |
| YD/T 4156-2022 |
Performance requirements and test methods for chargers for mobile communication handsets {译} 移动通信手持机用充电器的性能要求和试验方法 |
China Telecommunication Industry
Standards Performance requirement |
English PDF |
| YD/T 4155-2022 |
Performance requirements and test methods for lithium-ion battery packs for mobile communication handsets {译} 移动通信手持机用锂离子电池组的性能要求和试验方法 |
China Telecommunication Industry
Standards Performance requirement |
English PDF |
| YD/T 4167.1-2022 |
5G Mobile Network Packet Data Service Charging System Charging Performance Technical Requirements and Test Methods Part 1: NSA Architecture {译} 5G移动网分组数据业务计费系统计费性能技术要求和测试方法 第1部分：NSA架构 |
China Telecommunication Industry
Standards Performance requirement |
English PDF |
| YD/T 2308-2022 |
Transmission Performance requirements and test methods for vehicle-mounted narrowband voice communication equipment {译} 车载窄带语音通信设备传输性能要求和测试方法 |
China Telecommunication Industry
Standards Performance requirement |
English PDF |
| YD/T 4137-2022 |
Functions, Performance requirements and test methods of home 4K high-definition IPTV set-top box WLAN and other same-frequency or similar-frequency wireless transmission based on telecommunication network {译} 基于电信网的家庭4K高清IPTV机顶盒WLAN和其他同频率或相近频率无线传输的功能、性能要求和测试方法 |
China Telecommunication Industry
Standards Performance requirement |
English PDF |
| YD/T 1381-2022 |
IP Network Technical Requirements Network Performance Measurement Methods {译} IP网络技术要求 网络性能测量方法 |
China Telecommunication Industry
Standards Performance requirement |
English PDF |
| YD/T 4089-2022 |
Technical requirements for mobile Internet application (APP) performance management platform {译} 移动互联网应用（APP）性能管理平台技术要求 |
China Telecommunication Industry
Standards Performance requirement |
English PDF |
| JT/T 1447-2022 |
Performance requirements and test procedures for low-speed driving assistance systems of commercial vehicles {译} 营运车辆低速驾驶辅助系统性能要求和测试规程 |
China Transport Industry
Standards Performance requirement |
English PDF |
| JT/T 1446-2022 |
Performance requirements and testing methods of forward collision mitigation system for commercial vehicles {译} 营运车辆前向碰撞减缓系统性能要求和检测方法 |
China Transport Industry
Standards Performance requirement |
English PDF |
| JT/T 1428-2022 |
Performance requirements and test procedures for rear collision warning system of commercial vehicles {译} 营运车辆后向碰撞预警系统性能要求和测试规程 |
China Transport Industry
Standards Performance requirement |
English PDF |
| YY 9706.268-2022 |
Medical electrical equipment - Part 2-68: Particular requirements for basic safety and essential performance of X-ray image-guided radiotherapy equipment for electron accelerators, light ion beam therapy equipment and radionuclide beam therapy equipment {译} 医用电气设备 第2-68部分：电子加速器、轻离子束治疗设备和放射性核素射束治疗设备用的X射线图像引导放射治疗设备的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.264-2022 |
Medical electrical equipment - Part 2-64: Particular requirements for basic safety and essential performance of light ion beam medical electrical equipment {译} 医用电气设备 第2-64部分：轻离子束医用电气设备的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.258-2022 |
Medical electrical equipment - Part 2-58: Particular requirements for basic safety and essential performance of lens extraction and vitrectomy equipment for ophthalmic surgery {译} 医用电气设备 第2-58部分：眼科手术用晶状体摘除及玻璃体切除设备的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YD/T 4016-2022 |
Performance requirements and test methods for Wi-Fi 6 interface of home broadband client intelligent gateway based on public telecommunication network {译} 基于公用电信网的家庭用宽带客户智能网关 Wi-Fi 6接口性能要求和测试方法 |
China Telecommunication Industry
Standards Performance requirement |
English PDF |
| YD/T 4066-2022 |
Mobile terminal image and video anti-shake performance technical requirements and test methods {译} 移动终端图像及视频防抖性能技术要求和测试方法 |
China Telecommunication Industry
Standards Performance requirement |
English PDF |
| JB/T 14264-2022 |
High temperature sodium battery Performance requirements and test methods {译} 高温钠电池性能要求和试验方法 |
China Machinery Industry
Standards Performance requirement |
English PDF |
| YY 9706.274-2022 |
Medical electrical equipment Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidification equipment{译} {译} 医用电气设备 第2-74部分：呼吸湿化设备的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.272-2021 |
Medical electrical equipment Part 2-72: Particular requirements for basic safety and essential performance of domestic ventilators used by ventilator-dependent patients {译} 医用电气设备 第2-72部分：依赖呼吸机患者使用的家用呼吸机的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.270-2021 |
Medical electrical equipment Part 2-70: Particular requirements for basic safety and essential performance of sleep apnea therapy equipment {译} 医用电气设备 第2-70部分：睡眠呼吸暂停治疗设备的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.252-2021 |
Medical electrical equipment - Part 2-52: Particular requirements for basic safety and essential performance of medical beds {译} 医用电气设备 第2-52部分:医用病床的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.247-2021 |
Medical electrical equipment Part 2-47: Particular requirements for basic safety and essential performance of Holter monitoring systems {译} 医用电气设备 第2-47部分：动态心电图系统的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.234-2021 |
Medical electrical equipment - Part 2-34: Particular requirements for basic safety and essential performance of invasive blood pressure monitoring equipment {译} 医用电气设备 第2-34部分:有创血压监护设备的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.221-2021 |
Medical electrical equipment - Part 2-21: Particular requirements for basic safety and essential performance of radiant warmers for infants {译} 医用电气设备 第2-21部分：婴儿辐射保暖台的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YD/T 2869.1-2021 |
Terminal MIMO antenna Performance requirements and measurement methods Part 1: LTE wireless terminals {译} 终端MIMO天线性能要求和测量方法 第1部分：LTE无线终端 |
China Telecommunication Industry
Standards Performance requirement |
English PDF |
| YY 9706.269-2021 |
Medical electrical equipment Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrators {译} 医用电气设备 第2-69部分：氧气浓缩器的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.262-2021 |
Medical electrical equipment Part 2-62: Particular requirements for basic safety and essential performance of high-intensity ultrasound therapy (HITU) equipment {译} 医用电气设备 第2-62部分：高强度超声治疗（HITU）设备的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.257-2021 |
Medical electrical equipment Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment for therapeutic, diagnostic, monitoring and plastic/medical cosmetic use {译} 医用电气设备 第2-57部分：治疗、诊断、监测和整形/医疗美容使用的非激光光源设备基本安全和基本性能的专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.250-2021 |
Medical electrical equipment - Part 2-50: Particular requirements for basic safety and essential performance of infant phototherapy equipment {译} 医用电气设备 第2-50部分:婴儿光治疗设备的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.240-2021 |
Medical electrical equipment - Part 2-40: Particular requirements for basic safety and basic performance of electromyography and evoked response equipment {译} 医用电气设备 第2-40部分：肌电及诱发反应设备的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.235-2021 |
Medical electrical equipment - Part 2-35: Particular requirements for basic safety and essential performance of medical blanket, pad or mattress heating equipment {译} 医用电气设备 第2-35部分：医用毯、垫或床垫式加热设备的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.233-2021 |
Medical electrical equipment - Part 2-33: Particular requirements for basic safety and essential performance of magnetic resonance equipment for medical diagnostic use {译} 医用电气设备 第2-33部分：医疗诊断用磁共振设备的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.220-2021 |
Medical electrical equipment - Part 2-20: Particular requirements for basic safety and essential performance of infant transport incubators {译} 医用电气设备 第2-20部分:婴儿转运培养箱的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.210-2021 |
Medical electrical equipment - Part 2-10: Particular requirements for basic safety and essential performance of nerve and muscle stimulators {译} 医用电气设备 第2-10部分：神经和肌肉刺激器的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.112-2021 |
Medical electrical equipment Part 1-12: General requirements for basic safety and essential performance Collateral standard: Requirements for medical electrical equipment and medical electrical systems intended for use in emergency medical services enviro {译} 医用电气设备 第1-12部分：基本安全和基本性能的通用要求 并列标准：预期在紧急医疗服务环境中使用的医用电气设备和医用电气系统的要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.111-2021 |
Medical Electrical Equipment Part 1-11: General Requirements for Basic Safety and Essential Performance Collateral Standard: Requirements for Medical Electrical Equipment and Medical Electrical Systems for Use in Home Care Environments {译} 医用电气设备 第1-11部分：基本安全和基本性能的通用要求 并列标准：在家庭护理环境中使用的医用电气设备和医用电气系统的要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY/T 9706.110-2021 |
Medical Electrical Equipment Part 1-10: General Requirements for Basic Safety and Essential Performance Collateral Standard: Requirements for the Development of Physiological Closed-Loop Controllers {译} 医用电气设备 第1-10部分：基本安全和基本性能的通用要求 并列标准：生理闭环控制器开发要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.108-2021 |
Medical Electrical Equipment Part 1-8: General Requirements for Basic Safety and Essential Performance Collateral Standard: General Requirements, Tests and Guidelines for Alarm Systems in Medical Electrical Equipment and Medical Electrical Systems {译} 医用电气设备 第1-8部分：基本安全和基本性能的通用要求 并列标准：通用要求,医用电气设备和医用电气系统中报警系统的测试和指南 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY/T 9706.106-2021 |
Medical electrical equipment Part 1-6: General requirements for basic safety and essential performance Collateral standard: Availability {译} 医用电气设备 第1-6部分：基本安全和基本性能的通用要求 并列标准：可用性 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| YY 9706.102-2021 |
Medical Electrical Equipment Part 1-2: General Requirements for Basic Safety and Essential Performance Collateral Standard: Electromagnetic Compatibility Requirements and Tests {译} 医用电气设备 第1-2部分：基本安全和基本性能的通用要求 并列标准：电磁兼容 要求和试验 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| JT/T 1374—2021 |
Performance requirements and test procedures for curve speed warning system for commercial vehicles {译} 营运车辆弯道速度预警系统性能要求和测试规程 |
China Transport Industry
Standards Performance requirement |
English PDF |
| YY 9706.241- 2020 |
Medical electrical equipment - Part 2-41: Particular requirements for basic safety and essential performance of surgical shadowless and diagnostic lamps {译} 医用电气设备 第2-41部分：手术无影灯和诊断用照明灯的基本安全和基本性能专用要求 |
China Pharmaceutics Industry
Standards Performance requirement |
English PDF |
| JB/T 13866-2020 |
Performance requirements and test methods for steering mechanism of three-wheeled vehicles {译} 三轮汽车转向操纵机构性能要求及试验方法 |
China Machinery Industry
Standards Performance requirement |
English PDF |
| JB/T 13864-2020 |
Three-wheeled vehicles - Braking Performance requirements and test methods {译} 三轮汽车 制动性能要求及试验方法 |
China Machinery Industry
Standards Performance requirement |
English PDF |
| JB/T 13862-2020 |
Three-wheeled vehicles - requirements and test methods for gliding performance {译} 三轮汽车 滑行性能要求及试验方法 |
China Machinery Industry
Standards Performance requirement |
English PDF |
| YD/T 3787-2020 |
Performance requirements and test methods of WLAN interface for home broadband customer gateway based on public telecommunication network {译} 基于公用电信网的家庭用宽带客户网关 WLAN接口性能要求和测试方法 |
China Telecommunication Industry
Standards Performance requirement |
English PDF |
| JT/T 1358—2020 |
Performance requirements and test methods for passenger car lane keeping assist systems {译} 客车车道保持辅助系统性能要求和试验方法 |
China Transport Industry
Standards Performance requirement |
English PDF |
| CY/T 224—2020 |
Bonding Performance requirements and testing methods of adhesives for folding cartons {译} 折叠纸盒用胶黏剂粘结性能要求及检验方法 |
China Publication Industry
Standards Performance requirement |
English PDF |
| SY/T 6544-2017 |
(Oil well cement slurry Performance requirements) 油井水泥浆性能要求 |
China Oil & Gas Industry
Standards Performance requirement |
English PDF |
| QC/T 1067.1-2017 |
(Connectors for automotive wiring harnesses and electrical equipment - Part 1: Definitions, test methods and general Performance requirements) 汽车电线束和电气设备用连接器 第1部分：定义、试验方法和一般性能要求 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QC/T 1066-2017 |
(Performance requirements and bench test method for cable assembly for car parking brake) 汽车驻车制动用拉索总成性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| SJ/T 11588-2016 |
(BDS / GPS integrated RF and baseband module Performance requirements and test methods) bds/gps射频与基带一体化模块性能要求与测试方法 |
China Electronics
Standards Performance requirement |
English PDF |
| JT/T 616-2016 |
(Rural roads construction and operation of bus performance General requirements) 乡村公路营运客车结构和性能通用要求 |
China Highway & Transportation
Standards Performance requirement |
English PDF |
| QC/T 307-2016 |
(Automobile vacuum booster Performance requirements and test methods of) 汽车用真空助力器性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QC/T 29078-2016 |
(Automotive air compressor Performance requirements and test methods of) 汽车用空气压缩机性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QC/T 1046-2016 |
(Post retarder Performance requirements and test methods of commercial vehicles) 商用车辆后置液力缓速器性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| YY/T 1441-2016 |
(Performance evaluation of in vitro diagnostic medical devices General requirements) 体外诊断医疗器械性能评估通用要求 |
China Medicine & Medical Device
Standards Performance requirement |
English PDF |
| YY/T 0506.2-2016 |
(Patients, staff and equipment with the surgical drapes, gowns and clean air suits - Part 2: Performance requirements and test methods) 病人、医护人员和器械用手术单、手术衣和洁净服 第2部分：性能要求和试验方法 |
China Medicine & Medical Device
Standards Performance requirement |
English PDF |
| QC/T 1028-2016 |
Performance requirements and test methods of vehicle vacuum check valve 汽车真空单向阀性能要求及试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QB/T 2511-2016 |
Single-ended metal halide lamps (Sc13-NaI series) with LC peak lead ballasts. Performance requirements 单端金属卤化物灯(钪钠系列)用lc顶峰超前式镇流器 性能要求 |
China Light Industry
Standards Performance requirement |
English PDF |
| SJ/T 11537-2015 |
High performance computer-Cluster-Technical requirement for monitoring system 高性能计算机 机群监控系统技术要求 |
China Electronics
Standards Performance requirement |
English PDF |
| SJ/T 11536.1-2015 |
High performance computer-Blade server - Part 1: Technical requirement for management module 高性能计算机 刀片服务器 第1部分：管理模块技术要求 |
China Electronics
Standards Performance requirement |
English PDF |
| QC/T 648-2015 |
Performance requirements and bench test methods of automotive steering tie rod assy 汽车转向拉杆总成性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QC/T 1019-2015 |
Performance requirements and bench test methods of automobile gear shifting control device 汽车变速换档操纵装置性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QB/T 4886-2015 |
Footwear. Performance requirement for sole flexing resistance at low-temperature 鞋类 鞋底低温耐折性能要求 |
China Light Industry
Standards Performance requirement |
English PDF |
| YD/T 2980-2015 |
(Fixed network voice service billing system metering performance technical requirements and test methods based on IMS) 基于ims的固定网语音业务计费系统计费性能技术要求和检测方法 |
China Telecommunication
Standards Performance requirement |
English PDF |
| TB/T 3418-2015 |
(Diner structural performance design requirements) 餐车结构性能设计要求 |
China Railway & Train
Standards Performance requirement |
English PDF |
| QC/T 200-2015 |
Performance requirements and test methods of reservoir for air brake equipment of automobile and trailer 汽车和挂车气压制动装置用储气筒性能要求及试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QB/T 4861-2015 |
Performance requirements for footwear accessory 鞋类附件性能要求 |
China Light Industry
Standards Performance requirement |
English PDF |
| QB/T 4832-2015 |
Technical requirements and test methods of humidity retention performance of household refrigerator 家用电冰箱保湿性能技术要求及试验方法 |
China Light Industry
Standards Performance requirement |
English PDF |
| YD/T 2869.1-2015 |
(MIMO terminal antenna Performance requirements and measuring methods - Part 1: LTE wireless terminal) 终端mimo天线性能要求和测量方法 第1部分：lte无线终端 |
China Telecommunication
Standards Performance requirement |
English PDF |
| YD/T 1328-2015 |
(Digital cellular mobile communication network voice service billing system metering performance technical requirements and test methods) 数字蜂窝移动通信网语音业务计费系统计费性能技术要求和检测方法 |
China Telecommunication
Standards Performance requirement |
English PDF |
| YD/T 1684-2015 |
(Billing service billing system technical requirements and test methods performance digital cellular mobile communications network to the point of the short message) 数字蜂窝移动通信网点对点短消息业务计费系统计费性能技术要求和检测方法 |
China Telecommunication
Standards Performance requirement |
English PDF |
| QC/T 1000.2-2015 |
Performance requirements and test methods of non-woven on automotive filter. Part 2: Non-woven of filters for air filter 汽车滤清器用非织布性能要求和测试方法 第2部分：空气滤清器用 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QC/T 1000.1-2015 |
Performance requirements and test methods of non-woven on automotive filter. Part 1: Non-woven of filters for passenger compartment 汽车滤清器用非织布性能要求和测试方法 第1部分：乘驾室空气滤清器用 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| YD/T 2789.2-2015 |
(Digital cellular mobile telecommunication network packet data service billing system metering performance technical requirements and test methods - Part 2: CDMA network) 数字蜂窝移动通信网分组数据业务计费系统计费性能技术要求和检测方法 第2部分：cdma网络 |
China Telecommunication
Standards Performance requirement |
English PDF |
| YD/T 2789.1-2015 |
(Digital cellular mobile telecommunication network packet data service billing system metering performance technical requirements and test methods - Part 1: TD-SCDMA / WCDMA / GSM network) 数字蜂窝移动通信网分组数据业务计费系统计费性能技术要求和检测方法 第1部分：td-scdma/wcdma/gsm网络 |
China Telecommunication
Standards Performance requirement |
English PDF |
| YD/T 1171-2015 |
(IP network technology requirements of network performance parameters and indicators) ip网络技术要求 网络性能参数与指标 |
China Telecommunication
Standards Performance requirement |
English PDF |
| YD/T 1154-2015 |
(Single-channel fiber amplifier Performance requirements and test methods erbium-doped) 单波道用掺铒光纤放大器性能要求和试验方法 |
China Telecommunication
Standards Performance requirement |
English PDF |
| YY/T 1302.2-2015 |
Physical requirements and microbiological performance of ethylene oxide sterilization. Part 2: Microbiological aspects 环氧乙烷灭菌的物理和微生物性能要求 第2部分：微生物要求 |
China Medicine & Medical Device
Standards Performance requirement |
English PDF |
| QC/T 1025-2016 |
Performance requirements and bench test methods of automatic transmission oil pump 自动变速器油泵性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| SN/T 4036.4-2014 |
(General technical requirements for the import and export of toys - Part 4: Electrical and radiation performance) 进出口玩具通用技术要求 第4部分：电及辐射性能 |
China Import Export Inspection
Standards Performance requirement |
English PDF |
| QC/T 987-2014 |
Performance requirements and test methods for safety belts retractor of motor vehicles 汽车安全带卷收器性能要求和试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| YD/T 1538-2014 |
(Digital mobile terminal technology audio Performance requirements and test methods) 数字移动终端音频性能技术要求及测试方法 |
China Telecommunication
Standards Performance requirement |
English PDF |
| QC/T 593-2014 |
Performance requirements and bench test methods of automobile hydraulic proportional valve 汽车液压比例阀性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| YY 0885-2013 |
Medical electrical equipment-Part 2: Particular requirements for the safety, including essential performance of ambulatory electrocardiographic systems 医用电气设备 第2部分：动态心电图系统安全和基本性能专用要求 |
China Medicine & Medical Device
Standards Performance requirement |
English PDF |
| YY 0600.4-2013 |
Lung ventilators for medical use-Particular requirements for basic safety and essential performance. Part 4: Coperator-powered resuscitators 医用呼吸机基本安全和主要性能专用要求 第4部分：人工复苏器 |
China Medicine & Medical Device
Standards Performance requirement |
English PDF |
| QC/T 961-2013 |
Performance requirements and bench test methods of hydraulic brake system plastic reservoir assembly 液压制动系统塑料储液罐性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QC/T 959-2013 |
Performance requirements and bench test methods of mechanical parking-brake control lever assembly 机械式驻车制动操纵杆总成性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QC/T 958-2013 |
Performance requirements and bench test methods of automobile vacuum pump 汽车真空泵性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QC/T 950-2013 |
Performance requirement and test of heating car cushion 汽车座椅加热垫技术要求和试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QC/T 592-2013 |
Performance requirements and Bench test methods for Hydraulic brake caliper assembly 液压制动钳总成性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| YD/T 1883-2013 |
Technical requirements and testing methods for charging performance of voice service of the fixed soft switch network 固定软交换网语音业务计费技术要求和检测方法 |
China Telecommunication
Standards Performance requirement |
English PDF |
| SJ/T 9148-2013 |
Electroacoustics. Instruments for measurement of aircraft noise-Performance requirements for systems to measure on-third-octave band sound pressure levels in noise certification of transport-category aeroplanes 电声学 飞机噪声测量仪器 运输机噪声评定用1/3倍频程声压级测量系统的性能要求 |
China Electronics
Standards Performance requirement |
English PDF |
| QC/T 649-2013 |
Motor vehicles. Steering control mechanism. Performance requirements and test methods 汽车转向操纵机构性能要求及试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QC/T 647-2013 |
Motor vehicles. Steering universal joint. Performance requirements and test methods 汽车转向万向节总成性能要求及试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QC/T 305-2013 |
Motor vehicles. Hydraulic power steering control valve. Performance requirements and test methods 汽车液压动力转向控制阀总成性能要求与试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QB/T 4355-2012 |
Self-ballasted fluorescent double-end Performance requirements 自镇流双端荧光灯 性能要求 |
China Light Industry
Standards Performance requirement |
English PDF |
| QB/T 2224-2012 |
Footwear. Performance requirement for uppers low-temperature flexing resistance 鞋类 帮面低温耐折性能要求 |
China Light Industry
Standards Performance requirement |
English PDF |
| YY 0854.2-2011 |
Performance requirements for pure cotton nonwoven surgical compresses. Part 2: Finished compress 全棉非织造布外科敷料性能要求 第2部分：成品敷料 |
China Medicine & Medical Device
Standards Performance requirement |
English PDF |
| YY 0854.1-2011 |
Performance requirements for pure cotton nonwoven surgical sompresses. Part 1: Nonwovens used in the manufacture of surgical compresses 全棉非织造布外科敷料性能要求 第1部分：敷料生产用非织造布 |
China Medicine & Medical Device
Standards Performance requirement |
English PDF |
| YY 0600.5-2011 |
Lung ventilators for medical use. Particular requirements for basic safety and essential performance. Part 5: Gas-powered emergency resuscitators 医用呼吸机 基本安全和主要性能专用要求 第5部分：气动急救复苏器 |
China Medicine & Medical Device
Standards Performance requirement |
English PDF |
| QB/T 4096.24-2011 |
Performance of room heaters for household and similar purposes. Part 24: Particular requirements for liquid-filled radiators 家用和类似用途室内加热器的性能 第24部分：充液式散热器的特殊要求 |
China Light Industry
Standards Performance requirement |
English PDF |
| QB/T 4096.23-2011 |
Performance of room heaters for household and similar purposes. Part 23: Particular requirements for visibly glowing radiant heaters 家用和类似用途室内加热器的性能 第23部分：可见灼热辐射式加热器的特殊要求 |
China Light Industry
Standards Performance requirement |
English PDF |
| QB/T 4096.22-2011 |
Performance of room heaters for household and similar purposes. Part 22: Particular requirements for fan heaters 家用和类似用途室内加热器的性能 第22部分：风扇式加热器的特殊要求 |
China Light Industry
Standards Performance requirement |
English PDF |
| QB/T 4096.21-2011 |
Performance of room heaters for household and similar purposes. Part 21: Particular requirements for convector heaters 家用和类似用途室内加热器的性能 第21部分：对流式加热器的特殊要求 |
China Light Industry
Standards Performance requirement |
English PDF |
| AQ 5212-2011 |
Test requirements and methods for safety performance of ventilation and purification equipment 通风净化设备安全性能检测要求及方法 |
China Safety & Security
Standards Performance requirement |
English PDF |
| QC/T 259-2011 |
Performance requirements and test methods of joint between rim and disc 车轮轮辋与轮辐焊接强度要求及试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| YD/T 2308-2011 |
Transmission Performance requirements and test methods for narrowband voice communication devices in vehicle 车载窄带语音通信设备传输性能要求和测试方法 |
China Telecommunication
Standards Performance requirement |
English PDF |
| YD/T 1686-2011 |
Speech quality and transmission Performance requirements and testing methods for IP telephony equipment ip电话终端设备语音质量及传输性能技术要求和测试方法 |
China Telecommunication
Standards Performance requirement |
English PDF |
| YD/T 2327-2011 |
Technical requirements and testing methods for charging performance of ADSL system adsl系统计费技术要求和检测方法 |
China Telecommunication
Standards Performance requirement |
English PDF |
| DL/T 320-2010 |
Performance requirements of personal arc protective equipment 个人电弧防护用品通用技术要求 |
China Electricity & Power
Standards Performance requirement |
English PDF |
| YD/T 2068.2-2010 |
2GHz TD-SCDMA digital cellular mobile telecommunication network TD-MBMS management technical requirement (Phase 1). Part 2: Performance network resource model 2ghz td-scdma数字蜂窝移动通信网多媒体广播系统（td-mbms）网络管理技术要求（第一阶段） 第2部分: 性能网络资源模型 |
China Telecommunication
Standards Performance requirement |
English PDF |
| SJ/T 11431-2010 |
Performance requirements and test methods for antenna of global positioning system (GPS) receiver gps接收机天线性能要求及测试方法 |
China Electronics
Standards Performance requirement |
English PDF |
| SJ/T 11428-2010 |
Performance requirements and test methods for GPS receivers OEM board gps接收机oem板性能要求及测试方法 |
China Electronics
Standards Performance requirement |
English PDF |
| SJ/T 11426-2010 |
Performance requirements and test methods for GPS receivers RF module gps接收机射频模块性能要求及测试方法 |
China Electronics
Standards Performance requirement |
English PDF |
| YY/T 0817-2010 |
Physical Performance requirements and test methods for enteral feeding catheters with a retention balloon 带定位球囊的肠营养导管物理性能要求及试验方法 |
China Medicine & Medical Device
Standards Performance requirement |
English PDF |
| YY 0784-2010 |
Medical electrical equipment. Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use 医用电气设备——医用脉搏血氧仪设备基本安全和主要性能专用要求 |
China Medicine & Medical Device
Standards Performance requirement |
English PDF |
| YY 0783-2010 |
Medical electrical equipment. Part 2-34:Particular requirements for the safety, including essential performance, of invasive blood pressure monitoring equipments 医用电气设备 第2-34部分：有创血压检测设备的安全和基本性能专用要求 |
China Medicine & Medical Device
Standards Performance requirement |
English PDF |
| YY 0782-2010 |
Medical electrical equipment. Part 2-51:Particular requirements for safety, including essential performance, of recording and analysing single channel and multichannel of electrocardiographs 医用电气设备 第2-51部分：记录和分析型单道和多道心电图机安全和基本性能专用要求 |
China Medicine & Medical Device
Standards Performance requirement |
English PDF |
| QB/T 4096-2010 |
Performance of room heaters for household and similar purposes. Part 1: General requirements 家用和类似用途室内加热器的性能 第1部分：通用要求 |
China Light Industry
Standards Performance requirement |
English PDF |
| SY/T 6544-2010 |
Performance requirements for oil well cement slurries 油井水泥浆性能要求 |
China Oil & Gas Industry
Standards Performance requirement |
English PDF |
| QB/T 4057-2010 |
LEDs for general lighting. Performance requirements 普通照明用发光二极管 性能要求 |
China Light Industry
Standards Performance requirement |
English PDF |
| YY 0601-2009 |
Medical electrical equipment. Particular requirements for basic safety and essential performance of respiratory gas monitors 医用电气设备 呼吸气体监护仪的基本安全和主要性能专用要求 |
China Medicine & Medical Device
Standards Performance requirement |
English PDF |
| YY/T 0754-2009 |
Particular requirements of the safety and essential performance for blood pressure transmission tubes for use with invasive blood pressure monitoring equipment 有创血压监护设备用血压传输管路安全和性能专用要求 |
China Medicine & Medical Device
Standards Performance requirement |
English PDF |
| YY/T 0749-2009 |
Ultrasonics. Hand-held probe Doppler foetal heartbeat detectors. Performance requirements and methods of measurement and reporting 超声 手持探头式多普勒胎儿心率检测仪 性能要求及测量和报告方法 |
China Medicine & Medical Device
Standards Performance requirement |
English PDF |
| XF 817-2009 |
Performance requirements and test methods for sprayed inorganic fiber fireproofing materials {译} 喷射无机纤维防火材料的性能要求及试验方法 |
China Fire industry
Standards Performance requirement |
English PDF |
| YY 0667-2008 |
Medical electrical equipment. Part 2-30:Particular requirements for the safety, including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment 医用电气设备 第2部分:自动循环无创血压监护设备的安全和基本性能专用要求 |
China Medicine & Medical Device
Standards Performance requirement |
English PDF |
| SN/T 2128-2008 |
Test methods and requirements of retroreflective performance for import and export retroreflective fabric 进出口逆反射面料逆反射性能的试验方法和要求 |
China Import Export Inspection
Standards Performance requirement |
English PDF |
| YD/T 1794-2008 |
Network Management Technical Requirements for 2GHz WCDMA Digital Cellular Mobile Communication Network Performance Criteria of Element Management System (EMS) ltf-N 2ghz wcdma数字蜂窝移动通信网网络管理技术要求 网元管理系统(ems)北向接口性能指标 |
China Telecommunication
Standards Performance requirement |
English PDF |
| QB/T 2987-2008 |
Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000V (generally called neon-transformers). Performance requirements 空载输出电压超过1000V的管形放电灯用变压器（霓虹灯变压器） 性能要求 |
China Light Industry
Standards Performance requirement |
English PDF |
| QC/T 79.2-2008 |
Road vehicles. Coiled tube assemblies for air brake connection between towing and towed vehicles. Part 2: Performance requirements 道路车辆 牵引车和挂车之间气制动连接用螺旋管总成 第2部分：性能要求 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QC/T 564-2008 |
Performance requirements and bench test methods for passenger car brake 乘用车制动器性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QC/T 311-2008 |
Performance requirements and bench test methods of automobile brake master cylinder 汽车液压制动主缸 性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QC/T 790-2007 |
Performance requirements and bench test methods for brake chamber 制动气室性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QC/T 789-2007 |
Performance requirements and bench test methods of automobile electric vortex retarder assembly 汽车电涡流缓速器总成性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QC/T 788-2007 |
Performance requirements and bench test methods of automobile pedal device 汽车踏板装置性能要求及台架试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QB/T 2878-2007 |
Auxiliaries for lamps. D.C.or A.C supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)-Performance requirements 灯用附件 放电灯(荧光灯除外)用直流或交流电子镇流器 性能要求 |
China Light Industry
Standards Performance requirement |
English PDF |
| DL/T 1070-2007 |
Qualification test methods and requirements for tree retardant performance of medium voltage XLPE power cables 中压交联电缆抗水树性能鉴定试验方法和要求 |
China Electricity & Power
Standards Performance requirement |
English PDF |
| JT/T 696-2007 |
Performance requirement for SW SSB station of ships sailing in Changjiang River 长江船用短波单边带电台性能要求 |
China Highway & Transportation
Standards Performance requirement |
English PDF |
| JT/T 681.1-2007 |
Navigation radar on inland waterway vessels. Part 1: Performance requirements 内河船舶导航雷达 第1部分:性能要求 |
China Highway & Transportation
Standards Performance requirement |
English PDF |
| YY 0600.3-2007 |
Lung ventilators for medical use. Particular requirements for basic safety and essential performance. Part 3: Emergency and transport ventilators 医用呼吸机 基本安全和主要性能专用要求 第3部分：急救和转运用呼吸机 |
China Medicine & Medical Device
Standards Performance requirement |
English PDF |
| YY 0600.2-2007 |
Lung ventilators for medical use. Particular requirements for basic safety and essential performance. Part 2: Home care ventilators for ventilator-dependent patients 医用呼吸机 基本安全和主要性能专用要求 第2部分：依赖呼吸机患者使用的家用呼吸机 |
China Medicine & Medical Device
Standards Performance requirement |
English PDF |
| YY 0600.1-2007 |
Lung ventilators for medical use. Particular requirements for basic safety and essential performance. Part 1: Home-care ventilatory support devices 医用呼吸机 基本安全和主要性能专用要求 第1部分：家用呼吸支持设备 |
China Medicine & Medical Device
Standards Performance requirement |
English PDF |
| YD/T 1431-2006 |
Technical requirement and testing methods for the charging performance of exchange. mobile intelligent network part 在用局用交换设备计费技术要求和检测方法——移动通信网智能网部分 |
China Telecommunication
Standards Performance requirement |
English PDF |
| YY 0331-2006 |
Performance requirements and test methods for absorbent cotton gauze and absorbent cotton and viscose gauze 脱脂棉纱布、脱脂棉粘胶混纺纱布的性能要求和试验方法 |
China Medicine & Medical Device
Standards Performance requirement |
English PDF |
| YD/T 1429-2006 |
Performance requirements and Testing Methods for Lightning Protection system of Running Telecommunication Stations/Sites 通信局(站)在用防雷系统的技术要求和检测方法 |
China Telecommunication
Standards Performance requirement |
English PDF |
| YD/T 1381-2005 |
IP network technical requirement. network performance testing methods ip网络技术要求——网络性能测量方法 |
China Telecommunication
Standards Performance requirement |
English PDF |
| QC/T 243-2004 |
Performance requirements and test methods of automobile wheeldisc base planeness 汽车车轮安装平面度要求及检验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| SN/T 1409-2004 |
Rules for the inspection of the Performance requirements of mill rolls for import and export 进出口冶金轧辊检验规程 |
China Import Export Inspection
Standards Performance requirement |
English PDF |
| YD/T 1300-2004 |
Technical requirements of SDH network performance. Error for path, multiplex and regenerator sections 同步数字体系(sdh)网络性能技术要求——通道、复用段和再生段误码 |
China Telecommunication
Standards Performance requirement |
English PDF |
| XF 495-2004 |
Performance requirements and test methods for flame retardant floor coverings {译} 阻燃铺地材料性能要求和试验方法 |
China Fire industry
Standards Performance requirement |
English PDF |
| SJ 20856-2002 |
Requirements of interoperability and performance for HF single-tone modem 高频串行调制解调器互操作和性能要求 |
China Electronics
Standards Performance requirement |
English PDF |
| SN/T 1163.2-2002 |
Import and export of GSM cellular phone Performance requirements for the inspection of 进出口gsm蜂窝电话性能要求检验规程 |
China Import Export Inspection
Standards Performance requirement |
English PDF |
| YD/T 1235.1-2002 |
Performance requirements for surge protective devices connected to low-voltage distribution systems of telecommunication stations/sites 通信局(站)低压配电系统用电涌保护器技术要求 |
China Telecommunication
Standards Performance requirement |
English PDF |
| QC/T 417.2-2001 |
Car wiring harness connector of the second part of the test methods and general Performance requirements (motorcycle parts) 车用电线束插接器 第2部分 试验方法和一般性能要求（摩托车部分） |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QC/T 417.1-2001 |
Vehicle wiring harness connector Part 1 Definitions, test methods and general Performance requirements (auto parts) 车用电线束插接器 第1部分 定义，试验方法和一般性能要求（汽车部分） |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| YD/T 1091-2000 |
Technical requirements and test methods of interface and transmission performance for 56kbit/s modem 56kbit/s调制解调器接口及传输性能技术要求和测试方法 |
China Telecommunication
Standards Performance requirement |
English PDF |
| QC/T 650-2000 |
Automotive the Steering Rod Ball pin Performance requirements and test methods 汽车转向拉杆球头销性能要求及试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QC/T 656-2000 |
Performance requirements of automotive air conditioning and refrigeration device 汽车空调制冷装置性能要求 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QC/T 291-1999 |
(Automotive mechanical Performance requirements of actuator) 汽车机械式分动器性能要求 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| QC/T 251-1998 |
(Mining dump truck emergency steering Performance requirements) 矿用自卸汽车应急转向性能要求 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| SJ/T 11193-1998 |
Multimedia Performance requirement for microcomputer 微型数字电子计算机多媒体性能规范 |
China Electronics
Standards Performance requirement |
English PDF |
| FZ/T 90090-1997 |
Textile machinery. Guide rollers for dyeing and finishing machinery. Main dimensions and working Performance requirements 纺织机械 染整机械导布辊 主要尺寸、技术要求 |
China Textile & Garment industry
Standards Performance requirement |
English PDF |
| QC/T 216-1996 |
(Performance requirements and test methods for automobile carpet) 汽车用地毯的性能要求和试验方法 |
China Automobile & Vehicle industry
Standards Performance requirement |
English PDF |
| SJ/T 10917-1996 |
Performance requirements for camera tube yoke assemblies 摄像管线圈组件技术要求 |
China Electronics
Standards Performance requirement |
English PDF |
| SJ/T 10914-1996 |
Performance requirements for meteorogical facsimile (analogue) 气象图传真机（模拟）技术要求 |
China Electronics
Standards Performance requirement |
English PDF |
| SJ/T 10721-1996 |
Performance requirements and methods of measurement for mobile station of public mobile communication system 公用移动通讯系统移动台技术要求和测量方法 |
China Electronics
Standards Performance requirement |
English PDF |
| SJ/T 10665-1995 |
Performance requirements and methods of measurement for base station of public mobile communication system 公用移动通信系统基地台技术要求和测量方法 |
China Electronics
Standards Performance requirement |
English PDF |
| SJ/T 10440-1993 |
Performance requirements for selective calling equipments used in mobile services 移动通信选择呼叫设备技术要求 |
China Electronics
Standards Performance requirement |
English PDF |
| SJ 20353-1993 |
General Performance requirements of electrical assembly for airborne reader 机载雷达电气装配通用技术要求 |
China Electronics
Standards Performance requirement |
English PDF |
| Find out:217Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
