Cart:
Keyword:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| HB 8621-2021 |
Test method for extrusion/bypass response of polymer matrix composite laminates for aerospace applications {译} 航空用聚合物基复合材料层合板挤压/旁路响应试验方法 |
China Aviation Industry
Standards Test method by |
 English PDF |
| YD/T 4175-2022 |
Electrical safety technical requirements and test methods for communication equipment powered by 240V/336V DC {译} 采用240V/336V直流供电的通信设备电气安全技术要求和试验方法 |
China Telecommunication Industry
Standards Test method by |
English PDF |
| YD/T 3932-2021 |
LTE/CDMA/TD-SCDMA/WCDMA/GSM(GPRS) multi-mode dual-card multi-standby terminal protocol conformance test method {译} LTE/CDMA/TD-SCDMA/WCDMA/GSM(GPRS)多模双卡多待终端协议一致性测试方法 |
China Telecommunication Industry
Standards Test method by |
English PDF |
| YY/T 0681.4—2021 |
Test methods for sterile medical device packaging - Part 4: Determination of seal leakage of breathable packaging by dye penetration method {译} 无菌医疗器械包装试验方法 第4部分：染色液穿透法测定透气包装的密封泄漏 |
China Pharmaceutics Industry
Standards Test method by |
English PDF |
| YY/T 0681.18-2020 |
Test methods for packaging of sterile medical devices - Part 18: Non-destructive testing of packaging for leaks by the vacuum decay method {译} 无菌医疗器械包装试验方法 第18部分：用真空衰减法无损检验包装泄漏 |
China Pharmaceutics Industry
Standards Test method by |
English PDF |
| NB/SH/T 0606-2019 |
Standard test method for hydrocarbon types in middle distillates by mass spectrometry 中间馏分烃类组成的测定 质谱法 |
China SH/T Petrochemical
Standards Test method by |
English PDF |
| YY/T 0681.17-2019 |
Test methods for packaging of sterile medical devices - Part 17: Microbial barrier testing by aerosol filtration for breathable packaging materials {译} 无菌医疗器械包装试验方法 第17部分：透气包装材料气溶胶过滤法微生物屏障试验 |
China Pharmaceutics Industry
Standards Test method by |
English PDF |
| NB/SH/T 0842-2017 |
Standard test method for sulfur in light liquid fuels by monochromatic wavelength dispersive X-ray fluorescence spectrometry 轻质液体燃料中硫含量的测定 单波长色散X射线荧光光谱法 |
China SH/T Petrochemical Industry
Standards Test method by |
English PDF |
| JGJ/T 378-2016 |
(Technical Specification for Testing Compressive Strength of Concrete by Pulling Method) 拉脱法检测混凝土抗压强度技术规程 |
China Building & Construction
Standards Test method by |
English PDF |
| JG/T 498-2016 |
Test method by using portable devices for determining indoor air pollutions 建筑室内空气污染简便取样仪器检测方法 |
China Building & Construction
Standards Test method by |
English PDF |
| YD/T 3041-2016 |
(LTE / CDMA / TD-SCDMA / WCDMA / GSM (GPRS) multi-mode dual card multi-standby terminal device test method) lte/cdma/td-scdma/wcdma/gsm(gprs)多模双卡多待终端设备测试方法 |
China Telecommunication
Standards Test method by |
English PDF |
| YY/T 1432-2016 |
(Test methods for sealing parameters flexible packaging materials for medical devices is determined by measuring the heat-sealing strength of the sample) 通过测量热封试样的密封强度确定医疗器械软性包装材料的热封参数的试验方法 |
China Medicine & Medical Device
Standards Test method by |
English PDF |
| NB/SH/T 0919-2015 |
Standard test method for determination of sulfur compounds in gaseous fuels and natural gas by chromatography and chemiuminescence 气体燃料和天然气中含硫化合物的测定 气相色谱和化学发光检测法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0918-2015 |
Standard test method for determination of catalyst acidity by ammonia chemisorption 固体催化剂酸度的测定 氨化学吸附法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0917-2015 |
Standard test method for determination of total volatile sulfur in gaseous hydrocarbons and liquefied petroleum gases by ultraviolet fluorescence 气态烃及液化石油气中总挥发性硫的测定 紫外荧光法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0910-2015 |
Standard test method for measurement of hindered phenolic antioxidant content in non-zinc turbine oils by linear sweep voltammetry 无锌涡轮机油中受阻酚型抗氧剂含量测定法 线性扫描伏安法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0908-2015 |
Standard test method for determining stability and compatibility of heavy fuel oils and crude oils by heavy fuel oil stability analyzer (optical detection) 重质燃料油和原油稳定性及相容性的测定 光学检测法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0905-2015 |
Standard test method for color of petroleum products by the automatic tristimulus method 石油产品颜色的测定 自动三刺激值法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0903-2015 |
Standard test method for determination of methanol content in fatty acid methyl esters by gas chromatography 脂肪酸甲酯中甲醇含量的测定 气相色谱法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0902-2015 |
Standard test method for measuring n-heptane induced phase separation of asphaltene-containing heavy fuel oil as separability number by an optical scanning device 含沥青质重质燃料油正庚烷诱导相可分离性值的测定 光学扫描法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0892-2015 |
Standard test method for determination of trace elements in middle distillate fuels by inductively coupled plasma atomic emission spectrometry (ICP-AES) 中间馏分燃料中痕量元素的测定 电感耦合等离子体原子发射光谱法 |
China Energy industry
Standards Test method by |
English PDF |
| YD/T 2865-2015 |
(LTE / TD-SCDMA / WCDMA / GSM (GPRS) multi-mode dual card multi-standby terminal device test method) lte/td-scdma/wcdma/gsm(gprs)多模双卡多待终端设备测试方法 |
China Telecommunication
Standards Test method by |
English PDF |
| YD/T 2863-2015 |
(LTE / WCDMA / GSM (GPRS) multi-mode dual card dual standby terminal device test method) lte/wcdma/gsm(gprs)多模双卡双待终端设备测试方法 |
China Telecommunication
Standards Test method by |
English PDF |
| YD/T 2861-2015 |
(LTE / CDMA / GSM (GPRS) multi-mode dual card multi-standby terminal equipment technical requirements and test methods) lte/cdma/gsm(gprs)多模双卡多待终端设备技术要求及测试方法 |
China Telecommunication
Standards Test method by |
English PDF |
| SJ/T 11498-2015 |
Test method for measuring oxygen contamination in heavily doped silicon substrates by secondary ion mass spectrometry 重掺硅衬底中氧浓度的二次离子质谱测量方法 |
China Electronics
Standards Test method by |
English PDF |
| SJ/T 11493-2015 |
Test method for measuring nitrogen concentration in silicon substrates by secondary ion mass spectrometry 硅衬底中氮浓度的二次离子质谱测量方法 |
China Electronics
Standards Test method by |
English PDF |
| SJ/T 11492-2015 |
Test methods for measurement of composition of gallium arsenide phosphide wafers by photoluminescence 光致发光法测定磷镓砷晶片的组分 |
China Electronics
Standards Test method by |
English PDF |
| SJ/T 11491-2015 |
Test methods for measurement of interstitial oxygen content in silicon by short baseline infrared absorption spectrometry 短基线红外吸收光谱法测量硅中间隙氧含量 |
China Electronics
Standards Test method by |
English PDF |
| SN/T 4108-2015 |
(Test methods pyridine herbicide alachlor water dispersible granules active ingredient content by HPLC) 除草剂啶磺草胺水分散粒剂有效成分含量的检验方法 高效液相色谱法 |
China Import Export Inspection
Standards Test method by |
English PDF |
| FZ/T 01124-2014 |
Textiles. Test method for resistance of fabric to penetration by acids or alkalis solution 纺织品 抗酸碱溶液渗透性能试验方法 |
China Textile & Garment industry
Standards Test method by |
English PDF |
| SY/T 6520-2014 |
Test method for dehydration of crude oil by autoclave 原油脱水试验方法 压力釜法 |
China Oil & Gas Industry
Standards Test method by |
English PDF |
| DL/T 1354-2014 |
The method of flash point of power oil by microscale continuously closed cup tester 电力用油闭口闪点测定 微量常闭法 |
China Electricity & Power
Standards Test method by |
English PDF |
| NB/SH/T 0883-2014 |
Standard test method for determination of ignition delay and derived cetane number of diesel fbel oil by combustion in a constant volanse chamber 柴油着火滞后期和导出十六烷值的测定 等容燃烧室法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0880-2014 |
Standard test method for determination of caldmm, chlorine, copper, magnesium, phospehorus, sulfur, and zinc in unused lubricating ails and additives by wavelength dispersive X-ray fluorescence spectromefry (mathematical correction procedure) 润滑油及添加剂中的钙、氯、铜、镁、磷、硫和锌含量的测定 波长色散X射线荧光光谱法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0879-2014 |
Standard test method for bong point distribution of samples with residues by high temperature gas chromatography 含残渣油样沸程分布的测定 高温气相色谱法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0737-2014 |
Standard test method for elasdc recovery of asphalt materials by ductilometer 沥青弹性恢复测定法 延度仪法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0663-2014 |
Standard test method for determination of alcohols and ethers in gasoline by gas chromatography 汽油中醇类和醚类含量的测定 气相色谱法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0632-2014 |
Standard test method for determining specific heat capacity by differential scamdng calorlmetry 比热容的测定 差示扫描量热法 |
China Energy industry
Standards Test method by |
English PDF |
| YY/T 0681.11-2014 |
Test methods for sterile medical device package. Part 11: Determining integrity of seals for medical packaging by visual inspection 无菌医疗器械包装试验方法 第11部分:目力检测医用包装密封完整性 |
China Medicine & Medical Device
Standards Test method by |
English PDF |
| YD/T 2686-2013 |
Test methods of LTF/CDMA/GSM(GPRS) multimode single-standby user equipment LTE/WCDMA/GSM(GPRS)多模单待终端设备测试方法 |
China Telecommunication
Standards Test method by |
English PDF |
| YD/T 2684-2013 |
Test method for multimode single standby user equipment of LTE/TD-SCDMA/WCDMA/GSM(GPRS) LTE/TD-SCDMA/WCDMA/GSM(GPRS)多模单待终端设备测试方法 |
China Telecommunication
Standards Test method by |
English PDF |
| SN/T 3596-2013 |
Test method for total fluorine in coal by the oxygen bomb combustion-ion selective electrode method 进出口煤炭中总氟含量的测定 氧弹燃烧/离子选择电极法 |
China Import Export Inspection
Standards Test method by |
English PDF |
| YD/T 2599-2013 |
Test method for multimode single standby user equipment of TD-LTE/LTE FDD/TD-SCDMA/WCDMA/GSM(GPRS) TD-LTE/LTE FDD/TD-SCDMA/WCDMA/GSM(GPRS)多模单待终端设备测试方法 |
China Telecommunication
Standards Test method by |
English PDF |
| YD/T 2597-2013 |
Test method for multimode single standby user equipment of TD-LTE/TD-SCDMA/GSM (GPRS) TD-LTE/TD-SCDMA/GSM(GPRS)多模单待终端设备测试方法 |
China Telecommunication
Standards Test method by |
English PDF |
| YD/T 2580-2013 |
LTE FDD/WCDMA/GSM (GPRS) multi-mode single-standby terminal equipment test methods LTE FDD/WCDMA/GSM（GPRS）多模单待终端设备测试方法 |
China Telecommunication
Standards Test method by |
English PDF |
| NB/SH/T 0873-2013 |
Standard test method for determination of oxidation stability of biodiesel and blends with diesel fuel by accelerated oxidation method 生物柴油及其调合燃料氧化安定性的测定 加速氧化法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0870-2013 |
Standard test method for dynamic viscosity and density of liquids by Stabinger viscometer(and the calculation of kinematic viscosity) 石油产品的动力黏度和密度的测定及运动黏度的计算 斯塔宾格黏度计法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0869-2013 |
Standard test method for oil separation from lubricating grease by centrifuging(Koppers method) 润滑脂离心分油测定法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0867-2013 |
Standard test method for determination of soot in diesel engine oils by thermal gravimetric analyzer 柴油机油烟炱含量的测定热重分析法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0865-2013 |
Standard test method for determination of wear metals and contaminants in used lubricating oils by rotating disc electrode atomic emission spectrometry 在用润滑油中磨损金属和污染物元素测定 旋转圆盘电极原子发射光谱法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0864-2013 |
Standard test method for determination of metals in lubricating greases by inductively coupled plasma atomic emission spectrometry 润滑脂中金属元素的测定 电感耦合等离子体发射光谱法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0861-2013 |
Standard test method for pentane insolubles by membrane filtration 戌烷不溶物的测定 膜过滤法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0859-2013 |
Standard test method for the thermal stability of chemicals by thermal analysis 化学物质热稳定性的测定 热分析法 |
China Energy industry
Standards Test method by |
English PDF |
| QC/T 921-2013 |
Specification and test methods of by-pass centrifugal luboil filters for automobiles 汽车用分流离心式机油滤清器技术条件和试验方法 |
China Automobile & Vehicle industry
Standards Test method by |
English PDF |
| YD/T 2520-2013 |
Technical requirements and testing methods for cdma2000 HRPD(cdma2000)/WCDMA(GSM) dual mode single standby digital mobile station cdma2000 hrpd（cdma2000）/wcdma（gsm）双模手动单待数字移动通信终端技术要求与测试方法 |
China Telecommunication
Standards Test method by |
English PDF |
| SN/T 0736.15-2013 |
Test method of import and export fertilizers. Part 15:Simultaneous determination of arsenic and mercury content by microwave-assisted digestion-atomic fluorescence spectrometry 进出口化肥检验方法 第15部分：微波消解-原子荧光光谱法同时测定砷、汞含量 |
China Import Export Inspection
Standards Test method by |
English PDF |
| JJF 1372-2012 |
Calibration Specification for Instrument of Testing Mortar-strength by Penetration Resistance Method 贯入式砂浆强度检测仪校准规范 |
China Metrological
Standards Test method by |
English PDF |
| SN/T 3077.1-2012 |
Test method for flash point by continuously closed cup tester 常闭式闭口杯闪点测定法 |
China Import Export Inspection
Standards Test method by |
English PDF |
| SY/T 0545-2012 |
Determination of thermal property parameters of the wax precipitation in crude oil. Test method by differential scanning calorimetry 原油析蜡热特性参数的测定 差示扫描量热法 |
China Oil & Gas Industry
Standards Test method by |
English PDF |
| DL 5270-2012 |
Test code for density and moisture by nuclear methods 核子法密度及含水量测试规程 |
China Electricity & Power
Standards Test method by |
English PDF |
| HG/T 3101-2011 |
Vulcanized rubber. Test method of the relative hysteresis and useful elasticity by elongation 硫化橡胶伸张时的有效弹性和滞后损失试验方法 |
China Chemical Industry
Standards Test method by |
English PDF |
| SN/T 2995-2011 |
Standard test method for determination of free and total glycerin in B-100 biodiesel methyl esters by gas chromatography b-100生物柴油脂肪酸甲酯中游离甘油和总甘油测定标准试验方法 气相色谱法 |
China Import Export Inspection
Standards Test method by |
English PDF |
| SY/T 6010-2011 |
Test method for fluid inclusion in sedimentary basins by microthermometry 沉积盆地流体包裹体显微测温方法 |
China Oil & Gas Industry
Standards Test method by |
English PDF |
| SN/T 2931-2011 |
Standard test method for naphthalene hydrocarbons in aviation turbine fuels by ultraviolet spectrophotometry 航空涡轮燃料中萘系烃标准试验方法 紫外分光光度法 |
China Import Export Inspection
Standards Test method by |
English PDF |
| SN/T 0736.14-2011 |
Test method of import and export fertilizers. Part 14:Determination of trace inorganic anions by ion chromatography method 进出口化肥检验方法 第14部分：离子色谱法测定微量无机阴离子 |
China Import Export Inspection
Standards Test method by |
English PDF |
| SN/T 2820-2011 |
Food contact materials for export. Polymers. Test methods for overall migration into aqueous food simulants by cell 食品接触材料 高分子材料 水基食品模拟物中总迁移量的试验方法 测试池法 |
China Import Export Inspection
Standards Test method by |
English PDF |
| SN/T 2817-2011 |
Food contact materials for export. Polymers. Test methods for overall migration into olive oil simulant by cell 食品接触材料 高分子材料 橄榄油模拟物中总迁移量的试验方法 测试池法 |
China Import Export Inspection
Standards Test method by |
English PDF |
| SN/T 1072-2011 |
Test method for proximate analysis of coal for import and export by instrumental procedures 进出口煤的工业分析方法 仪器法 |
China Import Export Inspection
Standards Test method by |
English PDF |
| JGJ/T 234-2011 |
Technical specification for compressive strength of masonry mortar bed testing by selective pressing method 择压法检测砌筑砂浆抗压强度技术规程 |
China Building & Construction
Standards Test method by |
English PDF |
| NB/SH/T 0059-2010 |
Standard test method for evaporation loss of lubricating oils by the Noack method 润滑油蒸发损失的测定 诺亚克法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0842-2010 |
Standard test method for fulfur in gasoline and diesel fuel by monochromatic wavelength dispersive X-ray fluorescence spectrometry 汽油和柴油中硫含量的测定 单波长色散x射线荧光光谱法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0704-2010 |
Standard test method for nitrogen in petroleum and petroleum products by boat-inlet chemiluminescence 石油和石油产品中氮含量的测定 舟进样化学发光法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0474-2010 |
Standard test method for gasoline diluent in used gasoline engine oils by gas chromatography 在用汽油机油中的稀释汽油含量的测定 气相色谱法 |
China Energy industry
Standards Test method by |
English PDF |
| YY/T 0815-2010 |
Standard test method for measurement of enthalpy of fusion, percent crystallinity, and melting point of ultra-high-molecular weight polyethylene by means of differential scanning calorimetry 差示扫描量热法测定超高分子量聚乙烯熔化焓、结晶度和熔点 |
China Medicine & Medical Device
Standards Test method by |
English PDF |
| YY/T 0814-2010 |
Standard test method for evaluating trans-vinylene yield in irradiated ultra-high-molecular-weight polyethylene fabricated forms intended for surgical implants by infrared spectroscopy 红外光谱法评价外科植入物用辐射后超高分子量聚乙烯制品中反式亚乙烯基含量的标准测试方法 |
China Medicine & Medical Device
Standards Test method by |
English PDF |
| YY/T 0681.5-2010 |
Test methods for sterile medical device package. Part 5: Detecting gross leaks in medical packaging by internal pressurization (bubble test) 无菌医疗器械包装试验方法 第5部分：内压法检测粗大泄漏（气泡法） |
China Medicine & Medical Device
Standards Test method by |
English PDF |
| YY/T 0681.4-2010 |
Test methods for sterile medical device package. Part 4: Detecting seal leaks in porous packages by dye penetration 无菌医疗器械包装试验方法 第4部分：染色液穿透法测定透气包装的密封泄漏 |
China Medicine & Medical Device
Standards Test method by |
English PDF |
| JC/T 2026-2010 |
Test method for fluorescent decay time of scintillators excited by pulsed X-ray 脉冲x射线激发闪烁体荧光衰减时间测试方法 |
China Building Materials
Standards Test method by |
English PDF |
| SN/T 2735-2010 |
Food contact materials. Polymers. Test methods for overall migration into olive oil food simulants by pouch 食品接触材料 高分子材料 橄榄油模拟物中总迁移量的试验方法 袋装法 |
China Import Export Inspection
Standards Test method by |
English PDF |
| NB/SH/T 0207-2010 |
Standard test method for water in insulating liquids by coulometric Karl Fischer titration 绝缘液中水含量的测定 卡尔·费休电量滴定法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0834-2010 |
Standard test method for determination of moderately high temperature piston deposits by thermooxidation engine oil simulation test (TEOST MHT) 发动机油适度高温活塞沉积物的测定 热氧化模拟试验法（teostmht） |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0831-2010 |
Test method for determination of fatty acid methyl esters and linolenic acid methyl ester contents in biodiesel by gas chromatograph 生物柴油中脂肪酸甲酯及亚麻酸甲酯含量的测定 气相色谱法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0829-2010 |
Standard test method for boiling range distribution of petroleum distillates in boiling range from 174 Celsius to 700 Celsius by gas chromatography 沸程范围 174℃～700℃石油馏分沸程分布的测定 气相色谱法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0828-2010 |
Standard test method for determination of silicon and other elements in engine coolant by inductively coupled plasma-atomic emission spectroscopy 发动机冷却液中硅与其它元素含量的测定 电感耦合等离子体原子发射光谱法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0827-2010 |
Standard test method for sulfur compounds in light petroleum liquids by gas chromatograph and sulfur ive detection 轻质石油馏发中含硫化合物的测定 气相色谱和硫选择性检测器法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0826-2010 |
Standard test method for estimation of engine oil volatility by capillary gas chromatography 发动机油挥发度的测定 毛细管气相色谱法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0825-2010 |
Standard test method for determination of oxidation stability of fatty acid methyl ester by accelerated oxidation test 脂肪酸甲酯氧化安定性的测定 如速氧化法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0824-2010 |
Standard test method for determination of additive elements in lubricating oils by inductively coupled plasma atomic emission spectrometry 润滑油中添加剂元素含量的测定 电感耦合等离子体原子发射光谱法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0822-2010 |
Standard test method for determination of phosphorus, sulfur, clacium, and zinc in lubrication oils by energy dispersive X-ray fluorescence spectroscopy 润滑油中磷、硫、钙和锌含量的测定 能量色散x射线荧光光谱法 |
China Energy industry
Standards Test method by |
English PDF |
| NB/SH/T 0816-2010 |
Standard test method for resistance of crumb rubber-modified asphalt by ball penetration tool 橡胶沥青弹性恢复率的测定 球入度法 |
China Energy industry
Standards Test method by |
English PDF |
| SN/T 2334-2009 |
Food contact materials. Polymers materials. Test methods for overall migration into olive oil by total immersion 食品接触材料 高分子材料 橄榄油中总迁移量的试验方法 全浸没法 |
China Import Export Inspection
Standards Test method by |
English PDF |
| SN/T 2335-2009 |
Food contact materials. Polymer materials. Test methods for overall migration into aqueous food stimulants by total immersion 食品接触材料 高分子材料 水性食品模拟物中总迁移量的试验方法 全浸没法 |
China Import Export Inspection
Standards Test method by |
English PDF |
| YY/T 0729.2-2009 |
Test methods for bonding properties of tissue adhesives. Part 2: Strength in T-peel by tension loading 组织粘合剂粘接性能试验方法 第2部分：t-剥离拉伸承载强度 |
China Medicine & Medical Device
Standards Test method by |
English PDF |
| YY/T 0698.7-2009 |
Packaging materials for terminal sterilized medical devices. Part 7: Adhesive coated paper for the manufacture of sealable packs for medical use for sterilization by ethylene oxide or irradiation. Requirements and test methods 最终灭菌医疗器械包装材料 第7部分：环氧乙烷或辐射灭菌屏障系统生产用可密封涂胶纸 要求和试验方法 |
China Medicine & Medical Device
Standards Test method by |
English PDF |
| YY/T 0729.1-2009 |
Test methods for boning properties of tissue adhesives. Part 1: Strength in lap-shear by tension loading 组织粘合剂粘接性能试验方法 第1部分：搭接-剪切拉伸承载强度 |
China Medicine & Medical Device
Standards Test method by |
English PDF |
| YY/T 0698.6-2009 |
Packaging materials for terminal sterilized medical devices. Part 6: Paper for manufacture of sterile barrier systems intended for sterilization by low temperature sterilization processes or irradiation. Requirements and test methods 最终灭菌医疗器械包装材料 第6部分：用于低温灭菌过程或辐射灭菌的无菌屏障系统生产用纸 要求和试验方法 |
China Medicine & Medical Device
Standards Test method by |
English PDF |
| SN/T 2199-2008 |
Food contact materials. Plastics. Test methods for overall migration into aqueous food simulants. By article filling 食品接触材料 塑料 水状食品模拟物总迁移量试验方法 填充法 |
China Import Export Inspection
Standards Test method by |
English PDF |
| YY/T 0700-2008 |
Clothing for protection against contact with blood and body fluids. Determination of the resistance of protective clothing materials to penetration by blood and body fluids. Test method using synthetic blood 血液和体液防护装备 防护服材料抗血液和体液穿透性能测试 合成血试验方法 |
China Medicine & Medical Device
Standards Test method by |
English PDF |
| YY/T 0691-2008 |
Clothing for protection against infectious agents. Medical face masks. Test method for resistance against penetration by synthetic blood (fixed volume, horizontally projected) 传染性病原体防护装备 医用面罩抗合成血穿透性试验方法（固定体积、水平喷射） |
China Medicine & Medical Device
Standards Test method by |
English PDF |
| YY/T 0689-2008 |
Clothing for protection against contact with blood and body fluids. Determination of resistance of protective clothing materials to penetration by blood-borne pathogens. Test method using Phi-X174 bacteriophage 血液和体液防护装备 防护服材料抗血液传播病原体穿透性能测试phi-x174噬菌体试验方法 |
China Medicine & Medical Device
Standards Test method by |
English PDF |
| YD/T 1816-2008 |
The Limit Requirement and Test Method of the Acoustic Noise Emitted by the Telecommunication Equipment 电信设备噪声限值要求和测量方法 |
China Telecommunication
Standards Test method by |
English PDF |
| SY/T 0522-2008 |
Determination of wax appearance temperature in crude petroleum. Test method by rotational viscometer 原油析蜡点测定 旋转粘度计法 |
China Oil & Gas Industry
Standards Test method by |
English PDF |
| SY/T 0521-2008 |
Determination of wax appearance temperature in crude petroleum. Test method by microscopic observation 原油析蜡点测定 显微观测法 |
China Oil & Gas Industry
Standards Test method by |
English PDF |
| YY/T 0641-2008 |
Standard Test Method for Transformation Temperature Of Nickel. Titanium Alloys by Thermal Analysis 热分析法测量niti合金相变温度的标准方法 |
China Medicine & Medical Device
Standards Test method by |
English PDF |
| SH/T 0605-2008 |
Standard test method for determination of molybdenum in lubricant and additive by atomic absorption spectrometry (AAS) 润滑油及添加剂中钼含量的测定 原子吸收光谱法 |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SN/T 1667.3-2007 |
Methods for the test of import and export mechanical and electrical commodity. Part 3: Measurement of standby power for household electrical appliances 进出口机电产品检测方法 第3部分:家用电器待机功率的测量 |
China Import Export Inspection
Standards Test method by |
English PDF |
| QB/T 2918-2007 |
Case and bag. Test method for impact resistance by means of falling weight 箱包 落锤冲击试验方法 |
China Light Industry
Standards Test method by |
English PDF |
| SH/T 0796-2007 |
Test method for determination of free and total glycerine in B-100 biodiesel methyl esters by gas chromatography B-100生物柴油脂肪酸甲酯中游离甘油和总甘油含量测定法（气相色谱法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0793-2007 |
Standard test method for aromatic carbon contents of hydrocarbon oils by high resolution nuclear magnetic resonance spectroscopy 烃类油品中芳碳含量测定法（高分辨核磁共振法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0792-2007 |
Standard test method for 2, 6-di-tert-butyl-p-cresol and 2, 6-di-tert-butyl phenol in electrical insulating oil by infrared absorption 电器绝缘油中2，6-二叔丁基对甲酚和2，6-二叔丁基苯酚含量测定法（红外吸收光谱法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0790-2007 |
Standard test method for oxidation induction time of lubricating greases by pressure differential scanning calorimetry 润滑脂氧化诱导期测定法（压力差示扫描量热法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0657-2007 |
Standard test method for trace nitrogenin liquid petroleum hydrocarbons by syringe/inlet oxidative combustion and chemiluminescence detection 液态石油烃中痕量氮的测定 氧化燃烧和化学发光法 |
China Petrochemical Industry
Standards Test method by |
English PDF |
| HG/T 3839-2006 |
Testing methods for shear strength of plastics by punch tool 塑料剪切强度试验方法 穿孔法 |
China Chemical Industry
Standards Test method by |
English PDF |
| DL/T 1030-2006 |
Test methods for proximate analysis of coal by automatic instrumental procedures 煤的工业分析 自动仪器法 |
China Electricity & Power
Standards Test method by |
English PDF |
| JJG(JT)072-2006 |
Testing apparatus for asphalt content by burning method |
China Metrological
Standards Test method by |
English PDF |
| JJG 072-2006 |
Testing apparatus for asphalt content by burning method |
China Metrological
Standards Test method by |
English PDF |
| SH/T 0768-2005 |
Test method of flash point by continuously closed cup tester 闪点测定法（常闭式闭口杯法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0606-2005 |
Standard test method for hydrocarbon types in middle distillates by mass spectrometry 中间馏分烃类组成测定法（质谱法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0181-2005 |
Standard test method for naphthalene hydrocarbons in jet fuels by ultraviolet spectrophotometry 喷气燃料中萘系烃含量测定法（紫外分光光度法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SY/T 4107-2005 |
Standard test methods for measurement of dry film thickness of mult-coating system by destructive means 复合防腐涂层各层厚度破坏性测量方法 |
China Oil & Gas Industry
Standards Test method by |
English PDF |
| SH/T 0753-2005 |
Standard test method for determination of chemical group composition in lube base oil by thin-layer chromatography 润滑油基础油化学族组成测定法 |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0751-2005 |
Standard test method for measuring viscosity at high temperature and high shear rate by tapered-plug viscometer 高温和高剪切速率下粘度测定法（锥形塞粘度计法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0750-2005 |
Standard test method for determination of high temperature deposits by thermo-oxidation engine oil simulation test 发动机油高温氧化沉积物测定法（热氧化模拟试验法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0749-2004 |
Standard test method for determination of additive elements in both lubricating oils and additives by inductively coupled plasma atomic emission spectrometry 润滑油及添加剂中添加元素含量测定法（电感耦合等离子体发射光谱法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0742-2004 |
Standard test method for sulfur in gasoline by energy-dispersive X-ray fluorescence spectrometry 汽油中硫含量测定法（能量色散X射线荧光光谱法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0733-2004 |
Test method for flash point by tag closed cup tester 闪点测定法（泰克闭口杯法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0731-2004 |
Standard test method for evaporation loss of lubricating oils by thermogravimetric analyzer (TGA) Noack method 润滑油蒸发损失测定法（热重诺亚克法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0729-2004 |
Test method for calculation of carbon distribution and structural group analysis of petroleum oils by the n-d-M method 石油馏分的碳分布和结构族组成计算方法（n-d-M法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| QB/T 2578-2002 |
Standard test method for chemical composition of ceramic materials by spectrophotometry 陶瓷原料化学成分光度分析方法 |
China Light Industry
Standards Test method by |
English PDF |
| SH/T 0720-2002 |
Standard test method for determination of oxygenates in gasoline by gas chromatography and oxygen selective flame ionization detection 汽油中含氧化合物测定法（气相色谱及氧选择性火焰离子化检测器法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0719-2002 |
Standard test method for oxidation induction time of lubricating oils by pressure differential scanning calorimetry (PDSC) 润滑油氧化诱导期测定法（压力差示扫描量热法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0716-2002 |
Test method for fretting wear protection by lubricating greases 润滑脂抗微动磨损性能测定法 |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0715-2002 |
Standard test methods for determination of nickel, vanadium, and iron in crude oils and residual fuels by inductively coupled plasma (ICP) atomic emission spectrometry 原油和残渣燃料油中镍、钒、铁含量测定法（电感耦合等离子体发射光谱法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0714-2002 |
Standard test method for detailed analysis of petroleum naphthas through n-nounane by capillary gas chromatography 石脑油中单体烃组成测定法（毛细管气相色谱法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0713-2002 |
Standard test method for determination of benzene and toluene in finished motor and aviation gasoline by gas chromatography 车用汽油和航空汽油中苯和甲苯含量的测定（气相色谱法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0712-2002 |
Standard test method for iron in gasoline by atomic absorption spectroscopy 汽油中铁含量测定法（原子吸收光谱法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0711-2002 |
Standard test method for manganese in gasoline by atomic absorption spectroscopy 汽油中锰含量测定法（原子吸收光谱法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0068-2002 |
Standard test method for density or relative density of coolant concentrates and engine coolants by the hydrometer 发动机冷却液及其浓缩液密度或相对密度测定法（密度计法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0705-2001 |
Standard test method for determination of vanadium in heavy oils by spectrophotometry 重质燃料油中钒含量测定法(分光光度法) |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0703-2001 |
Standard test method for measuring apparent viscosity at high-temperature and high-shear rate by multicell capillary viscometer 润滑油在高温高剪切速率条件下表观粘度测定法 |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0696-2000 |
Standard test method for nickel and vanadium in FCC equilibrium catalysts by hydrofluoric/sulfuric acid decomposition and atomic spectroscopic analysis FCC平衡催化剂中镍和钒测定法(氢氟酸/硫酸分解-原子光谱分析法) |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0695-2000 |
Standard test method for engine oil volatility by gas chromatography 发动机油挥发度测定法(气相色谱法) |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0693-2000 |
Standard test method for determination of benzene, boluene, ethylbenzene, p/m-xylene, o-xylene, C9 and heavier aromatics, and total aromatics in finished gasoline by gas chromatography 汽油中芳烃含量测定法（气相色谱法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0689-2000 |
Standard test method for determination of total sulfur in light hydrocarbons, motor fuels and oils by ultraviolet fluorescence 轻质烃及发动机燃料和其它油品的总硫含量测定法（紫外荧光法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0687-2000 |
Standard test method for measurement of lubricity of aviation turbine fuels by the ball-on-cylinder lubricity evaluator (BOCLE) 航空涡轮燃料润滑性测定法（球柱润滑性评定仪法） |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0684-1999 |
Standard test method for palladium in molecular sieve catalysts and in aluminum oxide base catalysts by atomic absorption spectrometry 分子筛和氧化铝基催化剂中钯含量测定法(原子吸收光谱法) |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0663-1998 |
Standard test method for determination of certain alcohols and ethers in gasoline by gas chromatography 汽油中某些醇类和醚类测定法(气相色谱法) |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0659-1998 |
Standard test method for hydrocarbon types analysis of gas-oil saturates fractions by high ionizing voltage mass spectrometry 瓦斯油中饱和烃馏分的烃类测定法(质谱法) |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0658-1998 |
Standard test method for hydrogen content of jet fuels by low resolution nuclear magnetic resonance spectrometry 喷气燃料氢含量测定法(低分辨核磁共振法) |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SJ 20714-1998 |
Test method for sub-surface damage of gallium arsenide polished wafer by X-ray double crystal diffraction 砷化镓抛光片亚损伤层的x射线双晶衍射试验方法 |
China Electronics
Standards Test method by |
English PDF |
| SH/T 0651-1997 |
Standard test method for tin in reforming catalysts by atomic absorption spectrometry 重整催化剂锡含量测定法(原子吸收光谱法) |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SH/T 0650-1997 |
Standard test method for rust protection by metal preservatives in the humidity cabinet 金属保护剂防锈性能试验法( 潮湿箱法) |
China Petrochemical Industry
Standards Test method by |
English PDF |
| SJ/T 11033-1996 |
Test method for density of electronic glass by the sink -- float comparator 电子玻璃密度的测试方法 浮沉法 |
China Electronics
Standards Test method by |
English PDF |
| SJ/T 10482-1994 |
Test method for characterizing semiconductor deep levels by transient capacitance techniques 半导体中深能级的瞬态电容测试方法 |
China Electronics
Standards Test method by |
English PDF |
| SJ/T 10146-1991 |
Specification for solderability test instrument by solder bath method 焊槽法可焊性测试仪技术条件 |
China Electronics
Standards Test method by |
English PDF |
| SJ/T 10145-1991 |
Specification for solderability test instrument by wetting balance method 润湿秤量法可焊性测试仪技术条件 |
China Electronics
Standards Test method by |
English PDF |
| SJ/T 10144-1991 |
Specification for solderability test instrument by globule method 焊球法可焊性测试仪技术条件 |
China Electronics
Standards Test method by |
English PDF |
| JJG(EJ)11-1991 |
(Determination of α by 2π multi-wire proportional counter, β plane source emission rate test method) |
China Metrological
Standards Test method by |
English PDF |
| HG/T 3101-1985 |
Vulcanized rubber-Test method of the relative hysteresis and useful elasticity by elongation |
China Chemical Industry
Standards Test method by |
English PDF |
| Find out:159Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
