China National Standards

China Test method standard Industry Standards English PDF List

  •  China "Test method standard" Industry Standards English PDF List:
    • Standard  Code Standard Title Standard Class Order
    YY/T 0509-2009 Standard requirements and test methods for bioabsorbable internal fixation plates and screws {译}
    生物可吸收内固定板和螺钉的标准要求和测试方法    		 China Pharmaceutics Industry Standards
    Test method standard
    English PDF
    JC/T 2664-2022 China ISO Standard Sand Grain Size Testing Method {译}
    中国ISO标准砂粒度检测方法    		 China Building Material Industry Standards
    Test method standard
    English PDF
    GA/T 2006-2022 Forensic science Gunpowder-powered non-standard bullet inspection Shooting test method {译}
    法庭科学 火药动力非制式枪弹检验 射击试验法    		 China Security Industry Standards
    Test method standard
    English PDF
    WS/T 798—2022 Qualitative test standard for disinfection effect of disinfectants - Application dilution method{译} {译}
    消毒剂消毒效果定性试验标准 应用稀释法    		 China Hygiene Industry Standards
    Test method standard
    English PDF
    JGJ/T 15-2021 [Standard test method for early presumed concrete strength]
    早期推定混凝土强度试验方法标准    		 China Building & Construction Standards
    Test method standard
    English PDF
    RB/T 037-2020 Guidelines for the Evaluation of Equivalence of Standard Methods for Microbiological Testing of Foods {译}
    食品微生物检测标准方法等效性评估指南    		 China Certification and Accreditation Industry Standards
    Test method standard
    English PDF
    YY/T 0694—2020 Standard test method for elastic recoil of balloon-expandable stents {译}
    球囊扩张支架弹性回缩的标准测试方法    		 China Pharmaceutics Industry Standards
    Test method standard
    English PDF
    NB/SH/T 0606-2019 Standard test method for hydrocarbon types in middle distillates by mass spectrometry
    中间馏分烃类组成的测定 质谱法    		 China SH/T Petrochemical Standards
    Test method standard
    English PDF
    JGJ/T413-2019 Technical standard for testing method and appraisal of adhesion reliability of glass curtain wall
    玻璃幕墙粘结可靠性检测评估技术标准    		 China National Standards
    Test method standard
    English PDF
    NB/SH/T 0842-2017 Standard test method for sulfur in light liquid fuels by monochromatic wavelength dispersive X-ray fluorescence spectrometry
    轻质液体燃料中硫含量的测定 单波长色散X射线荧光光谱法    		 China SH/T Petrochemical Industry Standards
    Test method standard
    English PDF
    SY/T 4112-2017 (Standard Test Method for Automatic Ultrasonic Testing of Butt Weld Seam of Oil and Gas Steel Pipeline)
    石油天然气钢质管道对接环焊缝全自动超声检测试块    		 China Oil & Gas Industry Standards
    Test method standard
    English PDF
    JJF 1607-2016 (Standard Test Method for Permission Assessment of Manufacturing Instruments for Resistance to Voltage Testers)
    耐电压测试仪制造计量器具许可考核必备条件技术规范    		 China Metrological Standards
    Test method standard
    English PDF
    NB/T 34036-2016 (Standard Test Method for Small - Scale Biomass Boilers)
    小型生物质锅炉试验方法    		 China Energy industry Standards
    Test method standard
    English PDF
    JC/T 2357-2016 (Standard Test Method for Performance of Foamed Concrete Products)
    泡沫混凝土制品性能试验方法    		 China Building Materials Standards
    Test method standard
    English PDF
    YY/T 1411-2016 (Standard Test Method for dentistry measures to improve or maintain dental unit treatment water microbial quality assessment)
    牙科学对改善或维持牙科治疗机治疗用水微生物质量的措施进行评估的试验方法    		 China Medicine & Medical Device Standards
    Test method standard
    English PDF
    YY/T 1425-2016 (Injection needle Performance Standard Test Method for Resistance of Materials Protective Clothing)
    防护服材料抗注射针穿刺性能标准试验方法    		 China Medicine & Medical Device Standards
    Test method standard
    English PDF
    HG/T 2780-2016 (Standard Test Method for Low Pressure Activity of Carbon Monoxide Sulfur - Resistant Conversion Catalysts)
    一氧化碳耐硫变换催化剂低压活性试验方法    		 China Chemical Industry Standards
    Test method standard
    English PDF
    NB/SH/T 0919-2015 Standard test method for determination of sulfur compounds in gaseous fuels and natural gas by chromatography and chemiuminescence
    气体燃料和天然气中含硫化合物的测定 气相色谱和化学发光检测法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0918-2015 Standard test method for determination of catalyst acidity by ammonia chemisorption
    固体催化剂酸度的测定 氨化学吸附法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0917-2015 Standard test method for determination of total volatile sulfur in gaseous hydrocarbons and liquefied petroleum gases by ultraviolet fluorescence
    气态烃及液化石油气中总挥发性硫的测定 紫外荧光法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0916-2015 Standard test method for determination of biodiesel (fatty acid methyl esters)content in diesel fuel oil using mid infrared spectroscopy
    柴油燃料中生物柴油（脂肪酸甲酯）含量的测定 红外光谱法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0912-2015 Standard test method for determination of kinematic viscosity at 100℃ of engine test oils
    发动机台架试验油100℃运动黏度测定法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0910-2015 Standard test method for measurement of hindered phenolic antioxidant content in non-zinc turbine oils by linear sweep voltammetry
    无锌涡轮机油中受阻酚型抗氧剂含量测定法 线性扫描伏安法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0909-2015 Standard test method for peel strength of poultry defeathering wax
    家禽拔毛专用蜡剥离强度试验法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0908-2015 Standard test method for determining stability and compatibility of heavy fuel oils and crude oils by heavy fuel oil stability analyzer (optical detection)
    重质燃料油和原油稳定性及相容性的测定 光学检测法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0905-2015 Standard test method for color of petroleum products by the automatic tristimulus method
    石油产品颜色的测定 自动三刺激值法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0903-2015 Standard test method for determination of methanol content in fatty acid methyl esters by gas chromatography
    脂肪酸甲酯中甲醇含量的测定 气相色谱法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0902-2015 Standard test method for measuring n-heptane induced phase separation of asphaltene-containing heavy fuel oil as separability number by an optical scanning device
    含沥青质重质燃料油正庚烷诱导相可分离性值的测定 光学扫描法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0901-2015 Standard test method for determining the glass transition temperatures of mineral oil-Differential scanning calorimetry
    矿物油玻璃化转变温度的测定 差示扫描量热法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0899-2015 Standard test method for measurement of effects of automotive engine oils on fuel economy of passenger cars and light-duty trucks in sequence VIB spark ignition engine
    汽车发动机油节能性能的评定 程序ⅵb法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0898-2015 Standard test method for evaluation of automotive engine oils for inhibition of deposit formation in a spark-ignition internal combustion engine fueled with gasoline and operated under low-temperature, light-duty conditions
    汽车发动机油低温油泥性能的评定 程序ⅴg法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0897-2015 Standard test method for evaluation of automotive engine oils in the sequence IVA spark-ignition engine
    汽车发动机油性能的评定 程序ⅳa法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0896-2015 Standard test method for evaluation of automotive engine oils in the sequence ⅢG spark-ignition engine
    汽车发动机油性能的评定 程序ⅲg法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0892-2015 Standard test method for determination of trace elements in middle distillate fuels by inductively coupled plasma atomic emission spectrometry (ICP-AES)
    中间馏分燃料中痕量元素的测定 电感耦合等离子体原子发射光谱法    		 China Energy industry Standards
    Test method standard
    English PDF
    SN/T 1492-2015 (Assessment method of a single standard material laboratory test results)
    采用标准材料的单个测试结果评估实验室偏倚的方法    		 China Import Export Inspection Standards
    Test method standard
    English PDF
    SJ/T 11531-2015 Wireless technical standards and test methods of read-write device for electronic label
    电子标签读写设备无线技术指标和测试方法    		 China Electronics Standards
    Test method standard
    English PDF
    JC/T 2273-2014 Standard test methods for determination of effective component and harmful substances in silane/siloxane building protecting agents
    硅烷/硅氧烷建筑防护剂中有效成分含量及有害物质测定方法    		 China Building Materials Standards
    Test method standard
    English PDF
    JGJ/T 347-2014 Standard of test methods for thermal environment of building
    建筑热环境测试方法标准    		 China Building & Construction Standards
    Test method standard
    English PDF
    NB/SH/T 0203-2014 Standard test method for measurement of load. carrying capacity of lubricating greease(Timken method)
    润滑脂承载能力的测定 梯姆肯法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0886-2014 Standard test method for pour point of petroleum products (Automatic tilt method)
    石油产品倾点的测定 自动倾斜法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0884-2014 Standard test method for Cummins ISM test
    柴油机油性能的评定 康明斯ISM法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0883-2014 Standard test method for determination of ignition delay and derived cetane number of diesel fbel oil by combustion in a constant volanse chamber
    柴油着火滞后期和导出十六烷值的测定 等容燃烧室法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0882-2014 Standard teat method for determining extreme pressure properties of lubricating oils using SRV test machine
    润滑油极压性能的测定 SRV试验机法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0880-2014 Standard test method for determination of caldmm, chlorine, copper, magnesium, phospehorus, sulfur, and zinc in unused lubricating ails and additives by wavelength dispersive X-ray fluorescence spectromefry (mathematical correction procedure)
    润滑油及添加剂中的钙、氯、铜、镁、磷、硫和锌含量的测定 波长色散X射线荧光光谱法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0879-2014 Standard test method for bong point distribution of samples with residues by high temperature gas chromatography
    含残渣油样沸程分布的测定 高温气相色谱法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0739-2014 Standard test method for viscosity dettrndnadon of asphalt materials at elevated t mperatures using a rotational viscometer
    沥青高温黏度测定法 旋转黏度仪法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0737-2014 Standard test method for elasdc recovery of asphalt materials by ductilometer
    沥青弹性恢复测定法 延度仪法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0723-2014 Standard test method for evaluation of corroesiveness of diesel engine oil at 121℃
    柴油机油在 121℃下腐蚀性能评定法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0663-2014 Standard test method for determination of alcohols and ethers in gasoline by gas chromatography
    汽油中醇类和醚类含量的测定 气相色谱法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0632-2014 Standard test method for determining specific heat capacity by differential scamdng calorlmetry
    比热容的测定 差示扫描量热法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0517-2014 Standard test method for evaluation of moisture eorrosion resistance of automotive gear lubricants
    车辆齿轮油防锈性能的评定 L-33-1法    		 China Energy industry Standards
    Test method standard
    English PDF
    YY/T 0960-2014 Spinal implants. Standard test method for measuring load induced subsidence of intervertebral body fusion device under static axial compression
    脊柱植入物 椎间融合器静态轴向压缩沉陷试验方法    		 China Medicine & Medical Device Standards
    Test method standard
    English PDF
    JGJ/T 27-2014 Standard for test methods of welded joint of reinforcing steel bars
    钢筋焊接接头试验方法标准    		 China Building & Construction Standards
    Test method standard
    English PDF
    JGJ/T 324-2014 Standard for test method of building curtain wall engineering
    建筑幕墙工程检测方法标准    		 China Building & Construction Standards
    Test method standard
    English PDF
    SY/T 6954-2013 Standard test method for high temperature oxidation kinetic parameters for heavy oil. Thermogravimetric method
    稠油高温氧化动力学参数测定方法 热重法    		 China Oil & Gas Industry Standards
    Test method standard
    English PDF
    SJ/T 10015-2013 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
    10kHz～200kHz音叉石英晶体元件的测试方法和标准值    		 China Electronics Standards
    Test method standard
    English PDF
    NB/SH/T 0415-2013 Standard test method for ultraviolet absorbance and absorptivity of petroleum products
    石油产品紫外吸光度和吸光系数测定法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0408-2013 Standard test method for surface wax on waxed paper or paperboard
    蜡纸或纸板表面蜡量测定法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0407-2013 Standard test method for water soluble acids and alkalis of petroleum waxes
    石油蜡水溶性酸或碱试验法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0306-2013 Standard test method for evaluating the scuffing load capacity of oils (FZG visual method)
    润滑油承载能力的评定FZG目测法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0876-2013 Standard test method for trace ethylene glycol in used engine oil
    在用发动机油中微量乙二醇的测定 气相色谱法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0873-2013 Standard test method for determination of oxidation stability of biodiesel and blends with diesel fuel by accelerated oxidation method
    生物柴油及其调合燃料氧化安定性的测定 加速氧化法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0872-2013 Standard test method for determination of shear stability of lubricating grease in presence of water(water stability test)
    水存在下润滑脂剪切稳定性测定法 水稳定性试验    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0870-2013 Standard test method for dynamic viscosity and density of liquids by Stabinger viscometer(and the calculation of kinematic viscosity)
    石油产品的动力黏度和密度的测定及运动黏度的计算 斯塔宾格黏度计法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0869-2013 Standard test method for oil separation from lubricating grease by centrifuging(Koppers method)
    润滑脂离心分油测定法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0867-2013 Standard test method for determination of soot in diesel engine oils by thermal gravimetric analyzer
    柴油机油烟炱含量的测定热重分析法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0865-2013 Standard test method for determination of wear metals and contaminants in used lubricating oils by rotating disc electrode atomic emission spectrometry
    在用润滑油中磨损金属和污染物元素测定 旋转圆盘电极原子发射光谱法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0864-2013 Standard test method for determination of metals in lubricating greases by inductively coupled plasma atomic emission spectrometry
    润滑脂中金属元素的测定 电感耦合等离子体发射光谱法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0862-2013 Standard test method for determination of yield stress and apparent viscosity of used engine oils at low temperature
    用过发动机油低温下屈服应力和表观黏度测定法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0861-2013 Standard test method for pentane insolubles by membrane filtration
    戌烷不溶物的测定 膜过滤法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0859-2013 Standard test method for the thermal stability of chemicals by thermal analysis
    化学物质热稳定性的测定 热分析法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0856-2013 Standard test method for evaluating the high temperature detergency of diesel engine oils for agriculture use
    农用柴油机油高温清净性评定法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0690-2013 Standard test method for middle distillate fuel storage stabilit at 43 Celsius
    中间馏分燃料油在43℃贮存安定性测定法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0588-2013 Standard test method for determining the volume contraction of petroleum waxes
    石油蜡体积收缩率测定法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0562-2013 Standard test method for determination of yield stress and apparent viscosity of engine oils at low temperature
    低温下发动机油屈服应力和表现黏度测定法    		 China Energy industry Standards
    Test method standard
    English PDF
    JC/T 478.2-2013 Standard test methods for building lime. Part 2: Methods for chemical analysis
    建筑石灰试验方法 第2部分：化学分析方法    		 China Building Materials Standards
    Test method standard
    English PDF
    JC/T 478.1-2013 Standard test methods for building lime. Part 1: Methods for phisical testing
    建筑石灰试验方法 第1部分：物理试验方法    		 China Building Materials Standards
    Test method standard
    English PDF
    YD/T 1576.1-2013 Test method of mobile station for 800MHz/2GHz cdma2000 digital cellular mobile telecommunication network. Part 1: Minimum standard, function and performance
    800mhz/2ghz cdma2000数字蜂窝移动通信网设备测试方法 移动台（含机卡一体） 第1部分：基本无线指标、功能和性能    		 China Telecommunication Standards
    Test method standard
    English PDF
    JC/T 2123-2012 Test method for standard measurement of demould time for refractory castable
    耐火浇注料标准脱模时间试验方法    		 China Building Materials Standards
    Test method standard
    English PDF
    SY/T 0085-2012 Standard test method for outdoor weathering exposure of pipeline coatings
    管道防腐层自然气候暴露试验方法    		 China Oil & Gas Industry Standards
    Test method standard
    English PDF
    SY/T 0073-2012 Standard test method for evaluating pipeline coating patch materials
    管道防腐层补伤材料评价试验方法    		 China Oil & Gas Industry Standards
    Test method standard
    English PDF
    SY/T 0041-2012 Standard test method for apparent shear strength of coatings to metal
    防腐涂料与金属粘结的剪切强度试验方法    		 China Oil & Gas Industry Standards
    Test method standard
    English PDF
    DL/T 1151.22-2012 Analytical methods of scale and corrosion products in power plants. Part 22: Standard test methods of X-ray fluorescence spectrometry and X-ray diffraction
    火力发电厂垢和腐蚀产物分析方法 第22部分：x-射线荧光光谱和x-射线衍射分析    		 China Electricity & Power Standards
    Test method standard
    English PDF
    NB/T 20133.5-2012 Specifications for protective coatings used in pressurized water reactor nuclear power plants. Part 5: Standard test method for chemical resistance
    压水堆核电厂设施设备防护涂层规范 第5部分：涂层系统耐化学介质的测定    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/T 20133.3-2012 Specifications for protective coatings used in pressurized water reactor nuclear power plants. Part 3: Standard test method for effects of gamma radiation
    压水堆核电厂设施设备防护涂层规范 第3部分：涂层系统受γ射线辐照影响的试验方法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/T 20133.2-2012 Specifications for protective coatings used in pressurized water reactor nuclear power plants. Part 2: Standard test method for evaluating coatings at simulated design basis accident(DBA)conditions
    压水堆核电厂设施设备防护涂层规范 第2部分：涂层系统在模拟设计基准事故条件下的评价试验方法    		 China Energy industry Standards
    Test method standard
    English PDF
    SY/T 0084-2012 Standard test methods for ring bendabity of pipeline coatings
    管道防腐层环状弯曲性能试验方法    		 China Oil & Gas Industry Standards
    Test method standard
    English PDF
    SY/T 0072-2012 Standard test method for cathodic disbonding of pipeline coatings subjected to elevated temperature
    管道防腐层高温阴极剥离试验方法    		 China Oil & Gas Industry Standards
    Test method standard
    English PDF
    YY/T 0867-2011 Standard test method for electrostatic decay time of nonwoven fabrics
    非织造布静电衰减时间的测试方法    		 China Medicine & Medical Device Standards
    Test method standard
    English PDF
    YY/T 0857-2011 Standard test methods for spinal implant constructs in a vertebrectomy model
    椎体切除模型中脊柱植入物试验方法    		 China Medicine & Medical Device Standards
    Test method standard
    English PDF
    SN/T 3017-2011 Standard test method for pour point of petroleum products. Automatic air pressure method
    石油产品倾点试验方法 自动气压法    		 China Import Export Inspection Standards
    Test method standard
    English PDF
    SN/T 2995-2011 Standard test method for determination of free and total glycerin in B-100 biodiesel methyl esters by gas chromatography
    b-100生物柴油脂肪酸甲酯中游离甘油和总甘油测定标准试验方法 气相色谱法    		 China Import Export Inspection Standards
    Test method standard
    English PDF
    SN/T 2298.5-2011 Inspection and quarantine general standard for imported solid wastes as raw materials. Part 5: Test method of corrosivity
    进口可用作原料的固体废物检验检疫通用标准 第5部分：腐蚀性检验方法    		 China Import Export Inspection Standards
    Test method standard
    English PDF
    AQ/T 1084-2011 Testing method and judgment standard of explosion hazard for mixed gases in coal mine disaster circumstance
    煤矿灾变环境混合气体测试方法与爆炸危险性判定规则    		 China Safety & Security Standards
    Test method standard
    English PDF
    SN/T 2931-2011 Standard test method for naphthalene hydrocarbons in aviation turbine fuels by ultraviolet spectrophotometry
    航空涡轮燃料中萘系烃标准试验方法 紫外分光光度法    		 China Import Export Inspection Standards
    Test method standard
    English PDF
    NB/SH/T 0401-2010 Standard test method for blocking and picking points of petroleum wax
    石油蜡粘点和结点测定法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0324-2010 Standard test method for oil separation from lubricating grease (Conical sieve method)
    润滑脂分油的测定 锥网法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0059-2010 Standard test method for evaporation loss of lubricating oils by the Noack method
    润滑油蒸发损失的测定 诺亚克法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0852-2010 Standard test method for determining the viscosity-temperature relationship of used and soot-containing engine oils at low temperature
    在用油和含烟炱的发动机油在低温下的黏温关系测定    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0848-2010 Standard test method for determining the apparent viscosity of polyethylene wax
    聚乙烯蜡表观黏度测定法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0847-2010 Standard test method for measuring friction and wear properties of extreme pressure (EP) lubricating oils using SRV test machine
    极压润滑油摩擦磨损性能的测定 srv试验机法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0844-2010 Standard test method for corrosiveness and oxidation stability of turbine oils
    涡轮机油腐蚀性和氧化安定性测定法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0842-2010 Standard test method for fulfur in gasoline and diesel fuel by monochromatic wavelength dispersive X-ray fluorescence spectrometry
    汽油和柴油中硫含量的测定 单波长色散x射线荧光光谱法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0841-2010 Standard dynamometer test method for measuring fuel economy improvement for gasoline engines
    汽油发动机燃油经济性评定法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0839-2010 Standard test method for low-temperature torque of grease-lubricated wheel bearings
    汽车轮毂轴承润滑脂低温转矩测定法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0704-2010 Standard test method for nitrogen in petroleum and petroleum products by boat-inlet chemiluminescence
    石油和石油产品中氮含量的测定 舟进样化学发光法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0556-2010 Standard test method for solvent extractables in petroleum waxes
    石油蜡溶剂抽出物测定法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0474-2010 Standard test method for gasoline diluent in used gasoline engine oils by gas chromatography
    在用汽油机油中的稀释汽油含量的测定 气相色谱法    		 China Energy industry Standards
    Test method standard
    English PDF
    YY/T 0815-2010 Standard test method for measurement of enthalpy of fusion, percent crystallinity, and melting point of ultra-high-molecular weight polyethylene by means of differential scanning calorimetry
    差示扫描量热法测定超高分子量聚乙烯熔化焓、结晶度和熔点    		 China Medicine & Medical Device Standards
    Test method standard
    English PDF
    YY/T 0814-2010 Standard test method for evaluating trans-vinylene yield in irradiated ultra-high-molecular-weight polyethylene fabricated forms intended for surgical implants by infrared spectroscopy
    红外光谱法评价外科植入物用辐射后超高分子量聚乙烯制品中反式亚乙烯基含量的标准测试方法    		 China Medicine & Medical Device Standards
    Test method standard
    English PDF
    YY/T 0813-2010 Standard test method for in situ determination of network parameters of crosslinked ultra high molecular weight polyethylene (UHMWPE)
    交联超高分子量聚乙烯（uhmwpe）分子网状结构参数的原位测定标准方法    		 China Medicine & Medical Device Standards
    Test method standard
    English PDF
    YY/T 0808-2010 Standard test methods for in vitro pulsatile durability testing of vascular stents
    血管支架体外脉动耐久性标准测试方法    		 China Medicine & Medical Device Standards
    Test method standard
    English PDF
    JC/T 749-2010 Standard methods of testing rubber gasket ring of prestressed and self-stressing concrete pipe
    预应力与自应力混凝土管用橡胶密封圈试验方法    		 China Building Materials Standards
    Test method standard
    English PDF
    QB/T 1322-2010 Standard test method for plasticity index of ceramic clay
    陶瓷泥料可塑性指数测定方法    		 China Light Industry Standards
    Test method standard
    English PDF
    NB/SH/T 0207-2010 Standard test method for water in insulating liquids by coulometric Karl Fischer titration
    绝缘液中水含量的测定 卡尔·费休电量滴定法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0835-2010 Standard test method for calculation of viscosity-gravity constant (VGC) of petroleum oils
    石油馏分黏重常数（vgc）计算法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0834-2010 Standard test method for determination of moderately high temperature piston deposits by thermooxidation engine oil simulation test (TEOST MHT)
    发动机油适度高温活塞沉积物的测定 热氧化模拟试验法（teostmht）    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0830-2010 Standard test method for indicating wear characteristics of non. Petroleum and petroleum hydraulic fluids in a constant volume vane pump
    非石油基和石油基液压油磨损特性叶片泵测定法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0829-2010 Standard test method for boiling range distribution of petroleum distillates in boiling range from 174 Celsius to 700 Celsius by gas chromatography
    沸程范围 174℃～700℃石油馏分沸程分布的测定 气相色谱法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0828-2010 Standard test method for determination of silicon and other elements in engine coolant by inductively coupled plasma-atomic emission spectroscopy
    发动机冷却液中硅与其它元素含量的测定 电感耦合等离子体原子发射光谱法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0827-2010 Standard test method for sulfur compounds in light petroleum liquids by gas chromatograph and sulfur ive detection
    轻质石油馏发中含硫化合物的测定 气相色谱和硫选择性检测器法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0826-2010 Standard test method for estimation of engine oil volatility by capillary gas chromatography
    发动机油挥发度的测定 毛细管气相色谱法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0825-2010 Standard test method for determination of oxidation stability of fatty acid methyl ester by accelerated oxidation test
    脂肪酸甲酯氧化安定性的测定 如速氧化法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0824-2010 Standard test method for determination of additive elements in lubricating oils by inductively coupled plasma atomic emission spectrometry
    润滑油中添加剂元素含量的测定 电感耦合等离子体原子发射光谱法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0823-2010 Standard test method for corrosion-preventive properties of lubricating greases in presence of dilute synthetic sea water environments
    润滑脂在稀释合成海水中防腐蚀性试验法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0822-2010 Standard test method for determination of phosphorus, sulfur, clacium, and zinc in lubrication oils by energy dispersive X-ray fluorescence spectroscopy
    润滑油中磷、硫、钙和锌含量的测定 能量色散x射线荧光光谱法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0817-2010 Standard test method for density of semi-solid and solid asphalt. Nickel crucible method
    半固体和固体沥青密度的测定 镍坩埚法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0816-2010 Standard test method for resistance of crumb rubber-modified asphalt by ball penetration tool
    橡胶沥青弹性恢复率的测定 球入度法    		 China Energy industry Standards
    Test method standard
    English PDF
    NB/SH/T 0809-2010 Standard test method for acid number (empirical) of synthetic and natural waxes
    天然蜡和合成蜡酸值测定法    		 China Energy industry Standards
    Test method standard
    English PDF
    YY/T 0509-2009 Standard specification and test methods for bioabsorbable plates and screws for internal fixation implants
    生物可吸收内固定板和螺钉的标准要求和测试方法    		 China Medicine & Medical Device Standards
    Test method standard
    English PDF
    HG/T 3128-2009 Standard test methods for sieve analysis of porcelain enamel
    搪玻璃釉粗细度测试方法    		 China Chemical Industry Standards
    Test method standard
    English PDF
    DL/T 1116-2009 Standard test method for efficacy of microbicides used in cooling water system
    循环冷却水用杀菌剂性能评价    		 China Electricity & Power Standards
    Test method standard
    English PDF
    YY/T 0695-2008 Standard test method for conducting cyclic potentiodynamic polarization measurements to determine the corrosion susceptibility of small lmplant devices
    小型植入器械腐蚀敏感性的循环动电位极化标准测试方法    		 China Medicine & Medical Device Standards
    Test method standard
    English PDF
    YY/T 0694-2008 Standard test method for measuring intrinsic elastic recoil of balloon-expandable stents
    球囊扩张支架弹性回缩的标准测试方法    		 China Medicine & Medical Device Standards
    Test method standard
    English PDF
    YY/T 0641-2008 Standard Test Method for Transformation Temperature Of Nickel. Titanium Alloys by Thermal Analysis
    热分析法测量niti合金相变温度的标准方法    		 China Medicine & Medical Device Standards
    Test method standard
    English PDF
    YY/T 0606.13-2008 Tissue engineered medical product. Part 13: Standard test method for automated enumeration of cell suspensions
    组织工程医疗产品 第13部分：细胞自动计数法    		 China Medicine & Medical Device Standards
    Test method standard
    English PDF
    SH/T 0605-2008 Standard test method for determination of molybdenum in lubricant and additive by atomic absorption spectrometry (AAS)
    润滑油及添加剂中钼含量的测定 原子吸收光谱法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0565-2008 Standard test method for determination of the sludging and corrosion tendencies of inhibited mineral oils
    加抑制剂矿物油的油泥和腐蚀趋势测定法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0428-2008 Standard test method for life of lubricating greases in ball bearings at elevated temperatures
    高温下润滑脂在球轴承中的寿命测定法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    HG/T 4065-2008 Standard Test Method for Determination of the Odor of Adhesivess
    胶粘剂气味评价方法    		 China Chemical Industry Standards
    Test method standard
    English PDF
    SH/T 0801-2007 Standard test method for determination of homogeneity and miscibility in automotive engine oils
    发动机油均匀性和混合性测定法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0800-2007 Standard test method for dropping point of waxes
    蜡滴点测定法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0797-2007 Standard test method for determination of benzene in spark-ignition engine fuels using mid infrared spectroscopy
    点燃式发动机燃料中苯含量的测定 中红外光谱法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0794-2007 Standard test method for vapor pressure of petroleum products (mini method)
    石油产品蒸气压的测定 微量法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0793-2007 Standard test method for aromatic carbon contents of hydrocarbon oils by high resolution nuclear magnetic resonance spectroscopy
    烃类油品中芳碳含量测定法（高分辨核磁共振法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0792-2007 Standard test method for 2, 6-di-tert-butyl-p-cresol and 2, 6-di-tert-butyl phenol in electrical insulating oil by infrared absorption
    电器绝缘油中2，6-二叔丁基对甲酚和2，6-二叔丁基苯酚含量测定法（红外吸收光谱法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0791-2007 Standard test method for measuring the effect on filterability of engine oils after treatment with various amounts of water and a long(6-h) heating time
    发动机油过滤性能测定法（经水处理及长时间加热）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0790-2007 Standard test method for oxidation induction time of lubricating greases by pressure differential scanning calorimetry
    润滑脂氧化诱导期测定法（压力差示扫描量热法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0657-2007 Standard test method for trace nitrogenin liquid petroleum hydrocarbons by syringe/inlet oxidative combustion and chemiluminescence detection
    液态石油烃中痕量氮的测定 氧化燃烧和化学发光法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0398-2007 Standard test method for molecular weight of petroleum wax and petrolatum
    石油蜡和石油脂分子量测定法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0103-2007 Standard test method for shear stability of polymer containing fluids using a European diesel injector apparatus
    含聚合物油剪切安定性的测定 柴油喷嘴法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0018-2007 Standard test method for apparent viscosity of petroleum waxes compounded with additives (hot melts)
    含添加剂石油蜡（热熔胶）表观粘度测定法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0429-2007 Standard test method for elastomer compatibility of lubricating greases and fluids
    润滑脂和液体润滑剂与橡胶相容性测定法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    HG/T 3924-2007 Standard test method for performance of boiler water treatment chemicals. Dynamic simulation method
    锅炉水处理药剂性能评价方法 动态法    		 China Chemical Industry Standards
    Test method standard
    English PDF
    SH/T 0788-2006 Standard test method for evaluation of automotive engine oils in the sequence Ⅷ spark-ignition engine (CLR oil test engine)
    内燃机油高温氧化和轴瓦腐蚀评定法（程序Ⅷ法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0787-2006 Standard test method for indicating wear characteristics of petroleum hydraulic fluids in a high pressure constant volume vane pump
    石油基液压油高压叶片泵磨损特性测定法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0786-2006 Standard test method for evaluation of engine oils in diesel four-stroke cycle supercharged 1M-PC single cylinder oil test engine
    柴油机油清静性评定法（开特皮勒1M-PC法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0784-2006 Standard test method for determining extreme pressure properties of lubricating grease using a high-frequency, linear-oscillation (SRV) test machine
    润滑脂极压性能测定法（高频线性振动试验机法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    JGJ 52-2006 Standard for technical requirements and test method of sand and crushed stone (or gravel) for ordinary concrete
    普通混凝土用砂、石质量及检验方法标准    		 China JG - Building Industry Standards
    Test method standard
    English PDF
    SH/T 0773-2005 Standard test method for life performance of automotive wheel bearing grease
    汽车轮毂轴承润滑脂寿命特性测定法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0772-2005 Standard test method for measuring the effect on filterability of engine oils after treatment with water and dry ice and a short heating time
    发动机油过滤性能测定法（经水和干冰处理及短时间加热）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0770-2005 Standard test method for freezing point of aviation fuels (Automatic phase transition method)
    航空燃料冰点测定法（自动相转换法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0769-2005 Standard test method for determination of vapor pressure of petroleum products, hydrocarbon, and hydrocarbon-oxygenate mixtures (Triple expansion method)
    石油产品、烃类及烃类-含氧化合物混合物蒸气压测定法（三级膨胀法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0606-2005 Standard test method for hydrocarbon types in middle distillates by mass spectrometry
    中间馏分烃类组成测定法（质谱法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0181-2005 Standard test method for naphthalene hydrocarbons in jet fuels by ultraviolet spectrophotometry
    喷气燃料中萘系烃含量测定法（紫外分光光度法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SY/T 4107-2005 Standard test methods for measurement of dry film thickness of mult-coating system by destructive means
    复合防腐涂层各层厚度破坏性测量方法    		 China Oil & Gas Industry Standards
    Test method standard
    English PDF
    SH/T 0763-2005 Standard test method for evaluation of rust preventive characteristics of automotive engine oils (Ball rust test method)
    汽油机油防锈性评定法（BRT法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0761-2005 Standard test method for evaluation of diesel engine oils in T-9 diesel engine
    柴油机油性能评定法（MACK T-9法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0760-2005 Standard test method for evaluation of diesel engine oils in T-8 diesel engine
    柴油机油性能评定法（MACK T-8法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0757-2005 Standard dynamometer test method for measuring the energy conserving quality of engine oils
    内燃机油节能性能评定法（程序Ⅵ法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0756-2005 Standard test method for evaluating the thermal stability of manual transmission lubricants in a cyclic durability test
    手动变速箱油热安定性评定法（循环耐久试验法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0755-2005 Standard test method for evaluation of the thermal and oxidative stability of lubricating oil used for manual transmissions and final drive axles
    手动变速箱油和后桥用油的热氧化安定性评定法（L-60-1法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0754-2005 Standard test method for evaluation of corrosiveness of diesel engine oil at 135 Celsius
    柴油机油在135℃下腐蚀性能评定法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0753-2005 Standard test method for determination of chemical group composition in lube base oil by thin-layer chromatography
    润滑油基础油化学族组成测定法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0751-2005 Standard test method for measuring viscosity at high temperature and high shear rate by tapered-plug viscometer
    高温和高剪切速率下粘度测定法（锥形塞粘度计法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0750-2005 Standard test method for determination of high temperature deposits by thermo-oxidation engine oil simulation test
    发动机油高温氧化沉积物测定法（热氧化模拟试验法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0776-2005 Standard test method for determining the fracture properties of asphalt binder in direct tension (DT)
    沥青断裂性能测定法（DT法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0775-2005 Standard test method for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR)
    沥青弯曲蠕变劲度测定法（BBR法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0099.3-2005 Standard test method for particle charge of cationic emulsified asphalt
    乳化沥青颗粒电荷试验法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0099.18-2005 Standard test method for density of emulsified asphalt
    乳化沥青密度测定法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0099.14-2005 Standard test method for the identification of cationic slow-setting cationic emulsified asphalt
    慢凝型阳离子乳化沥青鉴定方法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0099.13-2005 Standard test method for the identification test for rapid-setting cationic emulsified asphalt
    快凝型阳离子乳化沥青鉴定方法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    QB/T 2739-2005 Preparations of standard volumetric solutions of general test methods for washing products
    洗涤用品常用试验方法 滴定分析（容量分析）用试验溶液的制备    		 China Light Industry Standards
    Test method standard
    English PDF
    SH/T 0749-2004 Standard test method for determination of additive elements in both lubricating oils and additives by inductively coupled plasma atomic emission spectrometry
    润滑油及添加剂中添加元素含量测定法（电感耦合等离子体发射光谱法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0414-2004 Standard test method for odor of petroleum wax
    石油蜡嗅味试验法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0742-2004 Standard test method for sulfur in gasoline by energy-dispersive X-ray fluorescence spectrometry
    汽油中硫含量测定法（能量色散X射线荧光光谱法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    JC/T 603-2004 Standard test method for drying shinkage of mortar
    水泥胶砂缩试验方法    		 China Building Materials Standards
    Test method standard
    English PDF
    SH/T 0732-2004 Standard test method for low temperature, low shear rate, viscosity/temperature dependence of lubricating oils using a temperature-scanning technique
    润滑油低温低剪切速率下粘度与温度关系测定法（温度扫描法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0731-2004 Standard test method for evaporation loss of lubricating oils by thermogravimetric analyzer (TGA) Noack method
    润滑油蒸发损失测定法（热重诺亚克法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0175-2004 Standard test method for oxidation stability of distillate fuel oil (accelerated method)
    馏分燃料油氧化安定性测定法（加速法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0740-2003 Standard test method for separation of polymer modified asphalt
    聚合物改性沥青离析试验法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0738-2003 Standard test method for solubility of polymer-modified asphalt materials in 1, 1, 1-trichloroethane
    聚合物改性沥青1.1.1-三氯乙烷溶解度测定法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0736-2003 Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test)
    沥青旋转薄膜烘箱试验法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0735-2003 Standard test method for toughness and tenacity of bitumen
    沥青粘韧性试验法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0725-2002 Standard test method for carbon-type composition of insulating oils of petroleum origin
    石油基绝缘油碳型组成计算法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    QB/T 2578-2002 Standard test method for chemical composition of ceramic materials by spectrophotometry
    陶瓷原料化学成分光度分析方法    		 China Light Industry Standards
    Test method standard
    English PDF
    SH/T 0722-2002 Standard test method for high temperature foaming characteristics of lubricating oils
    润滑油高温泡沫特性测定法    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0721-2002 Standard test method for measuring friction and wear properties of lubricating grease using a high-frequency, linear-oscillation (SRV) test machine
    润滑脂摩擦磨损性能测定法（高频线性振动试验机法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0720-2002 Standard test method for determination of oxygenates in gasoline by gas chromatography and oxygen selective flame ionization detection
    汽油中含氧化合物测定法（气相色谱及氧选择性火焰离子化检测器法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF
    SH/T 0719-2002 Standard test method for oxidation induction time of lubricating oils by pressure differential scanning calorimetry (PDSC)
    润滑油氧化诱导期测定法（压力差示扫描量热法）    		 China Petrochemical Industry Standards
    Test method standard
    English PDF

    Find out:256Items   |  To Page of: First -Previous-Next -Last  | 1 2

    　

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2025 All Rights Reserved

    		- Since 2001 -
     Focus on China Standards & Compliance Services

    www.gbstandards.org
    China National Standards