Cart:
Keyword:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| KA/T 12—2023 |
Radio wave perspective detection method in mining working face {译} 回采工作面无线电波透视探测方法 |
China Mine safety industry
Standards mining |
 English PDF |
| KA/T 8—2023 |
Technical specifications for long-term observation of groundwater dynamics in mining areas {译} 矿区地下水动态长期观测技术规范 |
China Mine safety industry
Standards mining |
English PDF |
| KA/T 4—2023 |
Test method for coal seam floor mining rupture depth water pressure test {译} 煤层底板采动破裂深度压水试验测试方法 |
China Mine safety industry
Standards mining |
English PDF |
| NB/T 11288-2023 |
Shale oil natural energy failure mining core experimental method {译} 页岩油天然能量衰竭开采岩心实验方法 |
China Energy Industry
Standards mining |
English PDF |
| YY/T 0719.4-2009 |
Ophthalmic optics—Contact lens care products—Part 4: Guidelines for testing antimicrobial preservative effectiveness and determining discard dates {译} 眼科光学 接触镜护理产品 第4部分：抗微生物防腐有效性试验及测定抛弃日期指南 |
China Pharmaceutics Industry
Standards mining |
English PDF |
| NB/T 10761-2021 |
Technical requirements for comprehensive mechanized solid filling and caving cooperative coal mining method in coal mines {译} 煤矿综合机械化固体充填与垮落协同采煤法技术要求 |
China Energy Industry
Standards mining |
English PDF |
| NB/T 10760-2021 |
Safety regulations for ground electrification test of mining equipment {译} 矿用设备地面通电试验安全规程 |
China Energy Industry
Standards mining |
English PDF |
| NB/T 10757-2021 |
mining foam dust suppression device {译} 矿用泡沫降尘装置 |
China Energy Industry
Standards mining |
English PDF |
| NB/T 10743-2021 |
Acceptance specification for fully mechanized mining face {译} 智能化综采工作面验收规范 |
China Energy Industry
Standards mining |
English PDF |
| NB/T 10742-2021 |
Design specification for intelligent fully mechanized mining face {译} 智能化综采工作面设计规范 |
China Energy Industry
Standards mining |
English PDF |
| NB/T 10728-2021 |
Coal mine paste filling technical specification for retaining roadway mining {译} 煤矿膏体充填留巷开采技术规范 |
China Energy Industry
Standards mining |
English PDF |
| NB/T 10727-2021 |
Coal mine paste filling mining technical specification {译} 煤矿膏体充填开采技术规范 |
China Energy Industry
Standards mining |
English PDF |
| NB/T 10718-2021 |
mining Belt Scale {译} 矿用皮带秤 |
China Energy Industry
Standards mining |
English PDF |
| NB/T 10965-2022 |
Technical specification for low-level drainage roadway in coal mining face {译} 采煤工作面低位抽采巷技术规范 |
China Energy Industry
Standards mining |
English PDF |
| NB/T 10963-2022 |
Remanufacturing of mining equipment - Management requirements for the use of personal protective equipment {译} 矿用设备再制造 个体防护装备使用管理要求 |
China Energy Industry
Standards mining |
English PDF |
| NB/T 10961-2022 |
mining equipment remanufacturing process quality management control requirements {译} 矿用设备再制造 过程质量管理控制要求 |
China Energy Industry
Standards mining |
English PDF |
| NB/T 10958-2022 |
General requirements and marking for remanufacturing of mining equipment {译} 矿用设备再制造 通用要求及标识 |
China Energy Industry
Standards mining |
English PDF |
| NB/T 10957-2022 |
mining equipment remanufacturing - technical specification for rough inspection {译} 矿用设备再制造 毛坯检测技术规范 |
China Energy Industry
Standards mining |
English PDF |
| NB/T 10952-2022 |
KCB series mining explosion-proof switched reluctance motor (frame size 280~450) {译} KCB系列矿用隔爆型开关磁阻电动机(机座号 280~450) |
China Energy Industry
Standards mining |
English PDF |
| AQ/T 1122—2023 |
Implementation Rules for Safety Status Evaluation of Coalbed Methane Surface mining Enterprises {译} 煤层气地面开采企业安全现状评价实施细则 |
China Safety Industry
Standards mining |
English PDF |
| AQ/T 1120—2023 |
Implementation Rules for Safety Acceptance Evaluation of Coalbed Methane Surface mining Construction Projects {译} 煤层气地面开采建设项目安全验收评价实施细则 |
China Safety Industry
Standards mining |
English PDF |
| YY/T 0642-2022 |
Ultrasound - Acoustic field characteristics - Test method for determining thermal and mechanical indices of medical diagnostic ultrasound fields {译} 超声 声场特性 确定医用诊断超声场热和机械指数的试验方法 |
China Pharmaceutics Industry
Standards mining |
English PDF |
| NY/T 4130-2022 |
Technical Requirements for Vegetation Restoration of Bio-fences in Grassland mining Dumps {译} 草原矿区排土场植被恢复生物笆技术要求 |
China Agriculture Industry
Standards mining |
English PDF |
| NB/T 10992-2022 |
Wind power generating set - Method for determining the reduction factor of power generation evaluation {译} 风力发电机组 发电量评估折减系数取值方法 |
China Energy Industry
Standards mining |
English PDF |
| JB/T 14273-2021 |
mining excavator - Casting bucket teeth - Technical conditions {译} 矿用挖掘机 铸造斗齿 技术条件 |
China Machinery Industry
Standards mining |
English PDF |
| JB/T 14270-2021 |
mining wear-resistant rubber lining technical conditions {译} 矿用耐磨橡胶衬板 技术条件 |
China Machinery Industry
Standards mining |
English PDF |
| XB/T 803-2021 |
Evaluation Guidelines for Green Factories in Rare Earth mining, Dressing and Smelting Industry{译} {译} 稀土采选冶行业绿色工厂评价导则 |
China Rare Earth Industry
Standards mining |
English PDF |
| YS/T 1426-2021 |
Evaluation guidelines for green factories in non-ferrous metal mining and selection industry{译} {译} 有色金属采选业绿色工厂评价导则 |
China Non-ferrous Metal Industry
Standards mining |
English PDF |
| YS/T 1424-2021 |
Green Factory Evaluation Requirements for Copper mining and Dressing Industry{译} {译} 铜矿采选业绿色工厂评价要求 |
China Non-ferrous Metal Industry
Standards mining |
English PDF |
| YS/T 1423-2021 |
Evaluation requirements for green factories in lead-zinc ore mining and dressing industry{译} {译} 铅锌矿采选业绿色工厂评价要求 |
China Non-ferrous Metal Industry
Standards mining |
English PDF |
| NB/T 10853—2021 |
Technical specification for coalbed methane surface extraction well group in coal mining area{译} {译} 煤矿采动区煤层气地面抽采井群技术规范 |
China Energy Industry
Standards mining |
English PDF |
| NB/T 10852—2021 |
Reserve evaluation of coalbed methane development and area optimization method in stable mining area of coal mine{译} {译} 煤矿采动稳定区煤层气开发储量评估和片区优选方法 |
China Energy Industry
Standards mining |
English PDF |
| JB/T 14028-2021 |
mining polymer filter plate{译} {译} 矿用高分子过滤板 |
China Machinery Industry
Standards mining |
English PDF |
| JB/T 11296-2021 |
Natural stone mining forklift{译} {译} 天然石开采叉装车 |
China Machinery Industry
Standards mining |
English PDF |
| JB/T 14333-2021 |
mining crawler drill expansion pressure relief equipment{译} {译} 矿用履带式钻扩卸压装备 |
China Machinery Industry
Standards mining |
English PDF |
| JB/T 14335-2021 |
mining belt conveyor skid-mounted mobile tail{译} {译} 矿用皮带机撬装式移动机尾 |
China Machinery Industry
Standards mining |
English PDF |
| JB/T 14332-2021 |
mining crawler traction continuous belt changer{译} {译} 矿用履带牵引连续换带机 |
China Machinery Industry
Standards mining |
English PDF |
| JB/T 14334-2021 |
mining belt conveyor buffer bed{译} {译} 矿用皮带机缓冲床 |
China Machinery Industry
Standards mining |
English PDF |
| SL/T 423—2021 |
Technical specifications for the preparation and implementation of supervision and management of river sand mining planning {译} 河道采砂规划编制与实施监督管理技术规范 |
China Water Resources Industry
Standards mining |
English PDF |
| NB/T 10549-2021 |
Detection method for DC resistivity of floor grouting effect of coal mining face {译} 采煤工作面底板注浆效果直流电阻率探测方法 |
China Energy Industry
Standards mining |
English PDF |
| NB/T 10542-2021 |
Geological structure detection method of coal mining face Seismic wave attenuation imaging method {译} 煤矿采煤工作面地质构造探测方法 地震波衰减成像法 |
China Energy Industry
Standards mining |
English PDF |
| NB/T 10533-2021 |
Technical specification for treatment of coal mining subsidence area {译} 采煤沉陷区治理技术规范 |
China Energy Industry
Standards mining |
English PDF |
| NB/T 10524-2021 |
Test method for matching performance of three machines in fully mechanized mining face {译} 综采工作面三机配套性能试验测试方法 |
China Energy Industry
Standards mining |
English PDF |
| MT/T 1194-2020 |
mining general super capacitor electric locomotive {译} 矿用一般型超级电容器电机车 |
China Coal Industry
Standards mining |
English PDF |
| MT/T 1188-2020 |
Comprehensive dust-proof technical specification for fully mechanized mining face {译} 综采工作面综合防尘技术规范 |
China Coal Industry
Standards mining |
English PDF |
| MT/T 1184-2020 |
Safety technical specification for stripping coal mining in open pit coal mines {译} 露天煤矿剥离采煤安全技术规范 |
China Coal Industry
Standards mining |
English PDF |
| HG/T 3050.3-2020 |
Rubber or plastic coated fabrics - Determination of whole roll properties - Part 3: Method for determining thickness {译} 橡胶或塑料涂覆织物 整卷特性的测定 第3部分：测定厚度的方法 |
China Chemistry Industry
Standards mining |
English PDF |
| HG/T 3050.2-2020 |
Rubber or plastic coated fabrics - Determination of whole roll properties - Part 2: Methods for determining total mass per unit area, coating mass per unit area and base fabric mass per unit area {译} 橡胶或塑料涂覆织物 整卷特性的测定 第2部分：测定单位面积的总质量、单位面积的涂覆质量和单位面积的底布质量的方法 |
China Chemistry Industry
Standards mining |
English PDF |
| HG/T 3050.1-2020 |
Rubber or plastic coated fabrics - Determination of whole roll properties - Part 1: Methods for determining length, width and net mass {译} 橡胶或塑料涂覆织物 整卷特性的测定 第1部分：测定长度、宽度和净质量的方法 |
China Chemistry Industry
Standards mining |
English PDF |
| NB/T 10169-2019 |
mining hoist operating parameter tester {译} 矿用提升机运行参数测试仪 |
China Energy Industry
Standards mining |
English PDF |
| NB/T 10165-2019 |
mining intrinsically safe electric ball valve {译} 矿用本质安全型电动球阀 |
China Energy Industry
Standards mining |
English PDF |
| NB/T 10164-2019 |
General technical conditions for mining load cells {译} 矿用称重传感器通用技术条件 |
China Energy Industry
Standards mining |
English PDF |
| NB/T10383-2019 |
mining hydraulic self-moving trackless equipment train {译} 矿用液压自移无轨设备列车 |
China Energy Industry
Standards mining |
English PDF |
| NB/T10375-2019 |
Evaluation specification for green mine construction in underground mining of coal mines {译} 煤矿井工开采绿色矿山建设评价规范 |
China Energy Industry
Standards mining |
English PDF |
| NB/T10374-2019 |
Coal mine underground mining green mine construction technical requirements {译} 煤矿井工开采绿色矿山建设技术要求 |
China Energy Industry
Standards mining |
English PDF |
| NB/T10373-2019 |
Basic requirements for the compilation of green mine construction planning for underground mining in coal mines {译} 煤矿井工开采绿色矿山建设规划编制基本要求 |
China Energy Industry
Standards mining |
English PDF |
| NB/T10369-2019 |
Plastic sheathed thermal insulation steel pipe for mining {译} 矿用塑料护套保温钢管 |
China Energy Industry
Standards mining |
English PDF |
| NB/T 10365-2019 |
Design code for surface vertical wells for gas drainage in coal mining affected areas {译} 煤矿采动影响区瓦斯抽采地面直井设计规范 |
China Energy Industry
Standards mining |
English PDF |
| YY/T 1646-2019 |
Dentistry - Test methods for determining the x-ray resistance of materials {译} 牙科学 测定材料的X射线阻射性试验方法 |
China Pharmaceutics Industry
Standards mining |
English PDF |
| NB/T 34052-2017 |
(mining land reclamation area should be able to divide the inspection standards for non - grain land) 工矿用地复垦区宜能非粮地划分检验标准 |
China Energy industry
Standards mining |
English PDF |
| JJG 395-2016 |
(Determination Procedure of Determining Carbon and Sulfur Sulfur Analyzer) 定碳定硫分析仪检定规程 |
China Metrological
Standards mining |
English PDF |
| HG/T 22815-2016 |
(Code for design of mine water - soluble mining in chemical mine) 化工矿山钻井水溶法采矿设计规范 |
China Chemical Industry
Standards mining |
English PDF |
| JG/T 498-2016 |
Test method by using portable devices for determining indoor air pollutions 建筑室内空气污染简便取样仪器检测方法 |
China Building & Construction
Standards mining |
English PDF |
| HG/T 22805.1-2016 |
(Standardize chemical mining enterprises construction design content and depth? - Professional geological and mining) 化工矿山企业施工图设计内容和深度的规范-地质·采矿专业 |
China Chemical Industry
Standards mining |
English PDF |
| HG/T 22803-2016 |
(Chemical mining Engineering tris (ii) the principle of specification grade ore) 化工矿山工程设计三（二）级矿量原则规范 |
China Chemical Industry
Standards mining |
English PDF |
| SY 6360-2016 |
Oilfield polymer flooding alkali surfactant mining safety procedures 油田注聚合物、碱液、表面活性剂开采安全规程 |
China Oil & Gas Industry
Standards mining |
English PDF |
| XF 1301-2016 |
Rules for determining the cause of fire {译} 火灾原因认定规则 |
China Fire industry
Standards mining |
English PDF |
| NB/T 51046-2016 |
(Comprehensive mechanization mining material with high water bag filled with technical requirements) 综合机械化高水材料袋式充填采煤技术要求 |
China Energy industry
Standards mining |
English PDF |
| NB/SH/T 0908-2015 |
Standard test method for determining stability and compatibility of heavy fuel oils and crude oils by heavy fuel oil stability analyzer (optical detection) 重质燃料油和原油稳定性及相容性的测定 光学检测法 |
China Energy industry
Standards mining |
English PDF |
| NB/SH/T 0901-2015 |
Standard test method for determining the glass transition temperatures of mineral oil-Differential scanning calorimetry 矿物油玻璃化转变温度的测定 差示扫描量热法 |
China Energy industry
Standards mining |
English PDF |
| FZ/T 70007-2015 |
Method of test for determining the underarm seam strength of knitted garments 针织上衣腋下接缝强力试验方法 |
China Textile & Garment industry
Standards mining |
English PDF |
| SJ/T 11501-2015 |
Test method for determining crystal type of monocrystalline silicon carbide 碳化硅单晶晶型的测试方法 |
China Electronics
Standards mining |
English PDF |
| SJ/T 11488-2015 |
Test method for measuring resistivity, hall coefficient and determining hall mobility in semi-insulating GaAs single crystals 半绝缘砷化镓电阻率、霍尔系数和迁移率测试方法 |
China Electronics
Standards mining |
English PDF |
| JT/T 975-2015 |
Test-tube for determining density of asphalt 沥青比重瓶 |
China Highway & Transportation
Standards mining |
English PDF |
| NB/T 51035-2015 |
(Coal mining face groove wave seismic exploration methods) 回采工作面煤层槽波地震探测方法 |
China Energy industry
Standards mining |
English PDF |
| NB/T 51028-2015 |
(Coal mining industry construction design specifications) 煤炭工业矿井施工组织设计规范 |
China Energy industry
Standards mining |
English PDF |
| NB/T 10018-2015 |
Method of determining low-rank coal gas content 低煤阶煤层含气量测定方法 |
China Energy industry
Standards mining |
English PDF |
| AQ/T 4261-2015 |
Codes for status quo assessment for occupational hazard in the asbestos mining 石棉矿山职业病危害现状评价细则 |
China Safety & Security
Standards mining |
English PDF |
| AQ/T 4260-2015 |
Codes for effect-assessment for occupational hazard control in construction project of asbestos mining 石棉矿山建设项目职业病危害控制效果评价细则 |
China Safety & Security
Standards mining |
English PDF |
| AQ/T 4259-2015 |
Codes for pre-assessment for occupational hazard in construction project of asbestos mining 石棉矿山建设项目职业病危害预评价细则 |
China Safety & Security
Standards mining |
English PDF |
| AQ/T 4252-2015 |
Specification for prevention and control of occupational detriment in gold mining enterprises 黄金开采企业职业危害防护规范 |
China Safety & Security
Standards mining |
English PDF |
| HG/T 22802-2014 |
Code on content and depth for general planning of mining area of chemical mine 化工矿山矿区总体规划内容和深度的规范 |
China Chemical Industry
Standards mining |
English PDF |
| NB/T 51020-2014 |
Specification of powered support used in coal mining by solid backflling 煤矿用固体充填液压支架技术条件 |
China Energy industry
Standards mining |
English PDF |
| NB/SH/T 0882-2014 |
Standard teat method for determining extreme pressure properties of lubricating oils using SRV test machine 润滑油极压性能的测定 SRV试验机法 |
China Energy industry
Standards mining |
English PDF |
| NB/SH/T 0632-2014 |
Standard test method for determining specific heat capacity by differential scamdng calorlmetry 比热容的测定 差示扫描量热法 |
China Energy industry
Standards mining |
English PDF |
| YY/T 0918-2014 |
Test method for determining bacterial retention of membrane/ filter assembly utilized for infusion liquid filtration 药液过滤膜、药液过滤器细菌截留试验方法 |
China Medicine & Medical Device
Standards mining |
English PDF |
| YY/T 0681.11-2014 |
Test methods for sterile medical device package. Part 11: Determining integrity of seals for medical packaging by visual inspection 无菌医疗器械包装试验方法 第11部分:目力检测医用包装密封完整性 |
China Medicine & Medical Device
Standards mining |
English PDF |
| AQ/T 4240-2014 |
(Iron ore mining industry occupational health management specification) 铁矿采选业职业健康管理技术规范 |
China Safety & Security
Standards mining |
English PDF |
| YY/T 0642-2014 |
Ultrasound sound field characteristics -- Test methods for determining the thermal and mechanical indices of medical diagnostic ultrasound fields{译} {译} 超声声场特性 确定医用诊断超声场热和机械指数的试验方法 |
China Pharmaceutics Industry
Standards mining |
English PDF |
| JJG 1093-2013 |
Detectors of mining Carbon Monoxide 矿用一氧化碳检测报警器检定规程 |
China Metrological
Standards mining |
English PDF |
| YD/T 2611-2013 |
Methods for the determining of FSS interference and locating of interference source for GEO satellite 对地静止轨道卫星固定业务干扰判定及干扰源定位方法 |
China Telecommunication
Standards mining |
English PDF |
| JJF 1429-2013 |
Calibration Specification for Infrared Mammary Gland Examining Equipments 红外乳腺检查仪校准规范 |
China Metrological
Standards mining |
English PDF |
| SN/T 3613-2013 |
Test method for determining total volatile organic compounds from furniture 家具中总挥发性有机化合物的检测方法 |
China Import Export Inspection
Standards mining |
English PDF |
| JJG 1087-2013 |
Verification Regulation of Oxygen Alarm Detectors for mining 矿用氧气检测报警器检定规程 |
China Metrological
Standards mining |
English PDF |
| HJ 652-2013 |
Compiling guideline of eco-environmental protection and reclamation plan for mining(On trial) 矿山生态环境保护与恢复治理方案（规划）编制规范（试行） |
China Environmental Protection Industry
Standards mining |
English PDF |
| HJ 651-2013 |
Technical specification of eco-environmental protection and reclamation for mining(On trial) 矿山生态环境保护与恢复治理技术规范（试行） |
China Environmental Protection Industry
Standards mining |
English PDF |
| NB/SH/T 0588-2013 |
Standard test method for determining the volume contraction of petroleum waxes 石油蜡体积收缩率测定法 |
China Energy industry
Standards mining |
English PDF |
| JT/T 849-2013 |
Bituminous material determining ductility 沥青延度试验仪 |
China Highway & Transportation
Standards mining |
English PDF |
| DL/T 1204-2013 |
Standard practice for determining the coefficient of thermal expansion of mineral insulating oils 矿物绝缘油热膨胀系数测定法 |
China Electricity & Power
Standards mining |
English PDF |
| SN/T 3511-2013 |
Determination of mercury in minerals. General rules of direct mercury determining with solid injection method 矿物中汞的测定 固体进样直接测汞法通则 |
China Import Export Inspection
Standards mining |
English PDF |
| HJ 672-2013 |
(Acceptance of completed construction projects technical specifications - coal mining) |
China Environmental Protection Industry
Standards mining |
English PDF |
| HG/T 2805-2012 |
Solid woven fire resistant conveyor belts for underground mining 煤矿井下用织物整芯阻燃输送带 |
China Chemical Industry
Standards mining |
English PDF |
| SY/T 6892-2012 |
Methods of determining the particulate matter in natural gas pipeline 天然气管道内粉尘检测方法 |
China Oil & Gas Industry
Standards mining |
English PDF |
| SY/T 6101-2012 |
Technical requirements for determining phase behaviors of gas condensate reservoirs 凝析气藏相态特征确定技术要求 |
China Oil & Gas Industry
Standards mining |
English PDF |
| SY/T 5124-2012 |
Method of determining microscopically the reflectance of vitrinite in sedimentary 沉积岩中镜质体反射率测定方法 |
China Oil & Gas Industry
Standards mining |
English PDF |
| HG/T 4301-2012 |
Test method for determining resistance of rubber to fungi 橡胶防霉性能测试方法 |
China Chemical Industry
Standards mining |
English PDF |
| NB/T 51002-2012 |
Solid filling mechanized mining methods 综合机械化固体充填采煤方法 |
China Energy industry
Standards mining |
English PDF |
| DL/T 985-2012 |
Guide for determining energy efficiency for distribution transformers 配电变压器能效技术经济评价导则 |
China Electricity & Power
Standards mining |
English PDF |
| SN/T 3010-2011 |
Determination of mercury in paint. Method of direct determining of mercury with solid and liquid injection 涂料中汞含量的测定 固液进样直接测汞法 |
China Import Export Inspection
Standards mining |
English PDF |
| SN/T 2389.6-2011 |
Rules for the weight survey of import and export commodities by volume. Part 6: Determining the fullness of pipelines between vessels and shore tanks 进出口商品容器计重规程 第6部分： 岸船间管线充满度的判定 |
China Import Export Inspection
Standards mining |
English PDF |
| NB/SH/T 0852-2010 |
Standard test method for determining the viscosity-temperature relationship of used and soot-containing engine oils at low temperature 在用油和含烟炱的发动机油在低温下的黏温关系测定 |
China Energy industry
Standards mining |
English PDF |
| NB/SH/T 0848-2010 |
Standard test method for determining the apparent viscosity of polyethylene wax 聚乙烯蜡表观黏度测定法 |
China Energy industry
Standards mining |
English PDF |
| SN/T 2704.4-2010 |
Cutting fluid and machining process waste fluid. Part 4: Determination of mercury. Direct mercury determining method 切削液和机床排泄物 第4部分：汞的测定 测汞仪法 |
China Import Export Inspection
Standards mining |
English PDF |
| AQ 2027-2010 |
Safety testing specification of in-service mining dump trucks for metal and nonmetal opencast mines 金属非金属露天矿山在用矿用自卸汽车安全检验规范 |
China Safety & Security
Standards mining |
English PDF |
| JJF 1247-2010 |
Calibration specification for weighing instruments for mining car in motion 动态（矿用）轻轨衡校准规范 |
China Metrological
Standards mining |
English PDF |
| JC/T 668-2009 |
Method for determining residue water-extractable sulfate in cement mortar 水泥胶砂中剩余三氧化硫含量的测定方法 |
China Building Materials
Standards mining |
English PDF |
| JC/T 601-2009 |
Methods for determining air content in cement mortar 水泥胶砂含气量测定方法 |
China Building Materials
Standards mining |
English PDF |
| JC/T 313-2009 |
Test method for determining expannsive ratio of expansive cement 膨胀水泥膨胀率试验方法 |
China Building Materials
Standards mining |
English PDF |
| JC/T 2000-2009 |
Apparatus for determining physical performance of oil well cement 油井水泥物理性能检测仪器 |
China Building Materials
Standards mining |
English PDF |
| JT/T 754-2009 |
Le Chatelier, Tester for determining expansion of Le Chatelier needles 雷氏夹及雷氏夹膨胀测定仪 |
China Highway & Transportation
Standards mining |
English PDF |
| JT/T 753-2009 |
Le Chatelier for determining of hydraulic cement 李氏密度瓶 |
China Highway & Transportation
Standards mining |
English PDF |
| YY 0719.4-2009 |
Ophthalmic optics-contact lens care products. Part 4: Antimicrobial preservative efficacy testing and determining discard date 眼科光学 接触镜护理产品 第4部分：抗微生物防腐有效性试验及测定抛弃日期指南 |
China Medicine & Medical Device
Standards mining |
English PDF |
| HJ 463-2009 |
Technical guidelines for plan enironment impact assessment. Coal industry mining area plan 规划环境影响评价技术导则 煤炭工业矿区总体规划 |
China Environmental Protection Industry
Standards mining |
English PDF |
| HJ 446-2008 |
Cleaner production standard. Coal mining and processing industry 清洁生产标准 煤炭采选业 |
China Environmental Protection Industry
Standards mining |
English PDF |
| AQ 1066-2008 |
The direct method of determining coalbed gas content in the mine 煤层瓦斯含量井下直接测定方法 |
China Safety & Security
Standards mining |
English PDF |
| YY 0324-2008 |
Infrared examining equipment for mammary gland 红外乳腺检查仪 |
China Medicine & Medical Device
Standards mining |
English PDF |
| JC/T 1086-2008 |
The method for determining the chloride diffusion coefficient for cement 水泥氯离子扩散系数检验方法 |
China Building Materials
Standards mining |
English PDF |
| JJF 1208-2008 |
Calibration Specification for Apparatus for Determining Penetration of Bituminous Materials 沥青针入度仪校准规范 |
China Metrological
Standards mining |
English PDF |
| AQ 1043-2007 |
mining Products Safety Label 矿用产品安全标志标识 |
China Safety & Security
Standards mining |
English PDF |
| SH/T 0784-2006 |
Standard test method for determining extreme pressure properties of lubricating grease using a high-frequency, linear-oscillation (SRV) test machine 润滑脂极压性能测定法（高频线性振动试验机法） |
China Petrochemical Industry
Standards mining |
English PDF |
| HJ/T 294-2006 |
Cleaner production standard. Iron ore mining and mineral processing industry 清洁生产标准 铁矿采选业 |
China Environmental Protection Industry
Standards mining |
English PDF |
| FZ/T 70005-2006 |
Test method for determining the stretch and growth properties of wool textile fabrics 毛纺织品伸长和回复性试验方法 |
China Textile & Garment industry
Standards mining |
English PDF |
| FZ/T 20023-2006 |
Test method for determining the dimensional change in woven wool fabrics during steaming. Hoffman method 毛机织物经汽蒸后尺寸变化率的测定 霍夫曼法 |
China Textile & Garment industry
Standards mining |
English PDF |
| FZ/T 20019-2006 |
Test method for determining the seam slippage of wool woven fabrics 毛机织物脱缝程度试验方法 |
China Textile & Garment industry
Standards mining |
English PDF |
| FZ/T 20011-2006 |
Test method for determining the angle of spirality in knitted wool garments 毛针织成衣扭斜角试验方法 |
China Textile & Garment industry
Standards mining |
English PDF |
| JC/T 962-2005 |
Tester for determining expansive of Le Chatelier needles 雷氏夹膨胀测定仪 |
China Building Materials
Standards mining |
English PDF |
| JC/T 954-2005 |
Le Chatelier for determining soundness of cement paste 水泥安定性试验用雷氏夹 |
China Building Materials
Standards mining |
English PDF |
| JC/T 727-2005 |
Apparatus for determining normal consistency and setting time of cement paste 水泥净浆标准稠度与凝结时间测定仪 |
China Building Materials
Standards mining |
English PDF |
| DL/T 933-2005 |
Test methods for determining the performance of cooling tower of transfer packing, drift eliminator and sprayer 冷却塔淋水填料、除水器、喷溅装置性能试验方法 |
China Electricity & Power
Standards mining |
English PDF |
| SH/T 0777-2005 |
Determining the rheological properties of asphalt bindder using a dynamic shear rheometer (DSR) 沥青流变性质测定法（DSR法） |
China Petrochemical Industry
Standards mining |
English PDF |
| SH/T 0776-2005 |
Standard test method for determining the fracture properties of asphalt binder in direct tension (DT) 沥青断裂性能测定法（DT法） |
China Petrochemical Industry
Standards mining |
English PDF |
| SH/T 0775-2005 |
Standard test method for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR) 沥青弯曲蠕变劲度测定法（BBR法） |
China Petrochemical Industry
Standards mining |
English PDF |
| HJ/T 241-2005 |
Principles and methods for determining the exhaust smoke emission limits of compression ignition engines in the vehicle loading and deceleration method {译} 确定压燃式发动机在用汽车加载减速法排气烟度排放限值的原则和方法 |
China Environment Industry
Standards mining |
English PDF |
| HJ/T 240-2005 |
Principles and methods for determining the emission limits of exhaust pollutants by the simple working condition method of ignition engines in use {译} 确定点燃式发动机在用汽车简易工况法排气污染物排放限值的原则和方法 |
China Environment Industry
Standards mining |
English PDF |
| HG/T 3716-2003 |
Hot-met adhesives. Determining the open time 热熔胶粘剂开放时间的测定 |
China Chemical Industry
Standards mining |
English PDF |
| QC/T 651-2000 |
mining dump truck vehicle product quality inspection and assessment method 矿用自卸汽车整车产品质量检验评定方法 |
China Automobile & Vehicle industry
Standards mining |
English PDF |
| SH/T 0691-2000 |
Standard test method for determining the effect of lubricants on swelling property of synthetic rubbers 润滑剂的合成橡胶溶胀性测定法 |
China Petrochemical Industry
Standards mining |
English PDF |
| HG/T 3010-1999 |
Methods for Determining the Scratch Resistance of Processed Photographic Film 已加工照相胶片抗划伤能力的测定 |
China Chemical Industry
Standards mining |
English PDF |
| JG/T 21-1999 |
Test methods for determining the performance of air cooling and air heating coils 空气冷却器与空气加热器性能试验方法 |
China Building & Construction
Standards mining |
English PDF |
| QC/T 251-1998 |
(mining dump truck emergency steering performance requirements) 矿用自卸汽车应急转向性能要求 |
China Automobile & Vehicle industry
Standards mining |
English PDF |
| QC/T 250-1998 |
(mining dump truck braking performance test test methods) 矿用自卸汽车试验方法 制动性能试验 |
China Automobile & Vehicle industry
Standards mining |
English PDF |
| HG/T 22811-1998 |
(Chemical mining machinery design specifications) 化工矿山机械设计规范 |
China Chemical Industry
Standards mining |
English PDF |
| HG/T 22813-1998 |
(Chemical process design specification aftermarket mining machine) 化工矿山机汽修工艺设计规范 |
China Chemical Industry
Standards mining |
English PDF |
| HG/T 22810-1997 |
(Chemical Mine open pit mining design specifications) 化工矿山露天采矿设计规范 |
China Chemical Industry
Standards mining |
English PDF |
| HG/T 22809-1997 |
(Chemical mine underground mining design specifications) 化工矿山地下采矿设计规范 |
China Chemical Industry
Standards mining |
English PDF |
| SY/T 5734-1995 |
(Sub-mining, dispensing well downhole packer seal inspection test procedures) 分采、分注井井下封隔器验封测试规程 |
China Oil & Gas Industry
Standards mining |
English PDF |
| YD/T 756-1995 |
Examining procedures for standardization of new products for posts and communications industry 邮电工业新产品标准化审查细则 |
China Telecommunication
Standards mining |
English PDF |
| SJ/T 10626-1995 |
Method for determining impurities in gold wire for semiconductor lead bonding by ICP-AES 键合金丝中杂质素的ｉｃｐ－ａｅｓ测定方法 |
China Electronics
Standards mining |
English PDF |
| QC/T 203-1995 |
(mining dump truck cab noise measurement methods and limits) 矿用自卸汽车驾驶室噪声 测量方法及限值 |
China Automobile & Vehicle industry
Standards mining |
English PDF |
| QC/T 202-1995 |
(Test methods for mining dump truck towing performance test) 矿用自卸汽车试验方法 牵引性能试验 |
China Automobile & Vehicle industry
Standards mining |
English PDF |
| JCJ 07-1994 |
(Building materials and mining engineering construction and acceptance) 建材矿山工程施工及验收规范 |
China Urban Construction industry
Standards mining |
English PDF |
| JCJ 07-1994 |
(Building materials and mining engineering construction and acceptance) 建材矿山工程施工及验收规范 |
China Building Materials
Standards mining |
English PDF |
| QC/T 76.7-1993 |
(Test methods for mining dump truck emergency steering capability test) 矿用自卸汽车试验方法 应急转向能力试验 |
China Automobile & Vehicle industry
Standards mining |
English PDF |
| QC/T 76.6-1993 |
(Test methods for mining dump truck fuel consumption test) 矿用自卸汽车试验方法 燃料消耗量试验 |
China Automobile & Vehicle industry
Standards mining |
English PDF |
| QC/T 76.5-1993 |
(Test methods for mining dump truck constant power test) 矿用自卸汽车试验方法 恒功试验 |
China Automobile & Vehicle industry
Standards mining |
English PDF |
| QC/T 76.4-1993 |
(Test methods for mining dump truck automatic transmission speed or speed test) 矿用自卸汽车试验方法 自动换档转速或车速试验 |
China Automobile & Vehicle industry
Standards mining |
English PDF |
| QC/T 76.3-1993 |
(Test methods for mining dump truck climbing ability test) 矿用自卸汽车试验方法 爬坡能力试验 |
China Automobile & Vehicle industry
Standards mining |
English PDF |
| QC/T 76.2-1993 |
(Test methods for mining dump truck driverseat reference point R measurement methods) 矿用自卸汽车试验方法 驾驶员座位基准点R测量方法 |
China Automobile & Vehicle industry
Standards mining |
English PDF |
| QC/T 76.11-1993 |
(mining dump truck reliability test using the test method) 矿用自卸汽车试验方法 使用可靠性试验 |
China Automobile & Vehicle industry
Standards mining |
English PDF |
| HG/T 2538-1993 |
Method for determining tensile properties of polyester films used for tapes 磁带用聚酯薄膜拉伸性能测量方法 |
China Chemical Industry
Standards mining |
English PDF |
| JJG 805-1993 |
Verification Regulation of Pretensioned Examining Tool with Pulley 滑轮式预加张力检具 |
China Metrological
Standards mining |
English PDF |
| HG/T 22805.9-1993 |
(Provisions of chemical mining enterprise construction design content and depth - heating, ventilation Professional) 化工矿山企业施工图设计内容和深度的规定——采暖通风专业 |
China Chemical Industry
Standards mining |
English PDF |
| HG/T 22805.8-1993 |
(Chemical mining enterprise construction design content and depth requirement - thermal engineering) 化工矿山企业施工图设计内容和深度的规定——热工专业 |
China Chemical Industry
Standards mining |
English PDF |
| HG/T 22805.7-1993 |
(Provisions of chemical mining enterprise construction design content and depth - the structure of professional) 化工矿山企业施工图设计内容和深度的规定——结构专业 |
China Chemical Industry
Standards mining |
English PDF |
| HG/T 22805.6-1993 |
(Provisions of chemical mining enterprise construction design content and depth - building professionals) 化工矿山企业施工图设计内容和深度的规定——建筑专业 |
China Chemical Industry
Standards mining |
English PDF |
| HG/T 22805.5-1993 |
(Chemical mining enterprise construction design content and depth requirement - General Plan Transportation Professional) 化工矿山企业施工图设计内容和深度的规定——总图运输专业 |
China Chemical Industry
Standards mining |
English PDF |
| HG/T 22805.4-1993 |
(Provisions of chemical mining enterprise construction design content and depth - tailings professional) 化工矿山企业施工图设计内容和深度的规定——尾矿专业 |
China Chemical Industry
Standards mining |
English PDF |
| HG/T 22805.3-1993 |
(Provisions of chemical mining enterprise construction design content and depth - mine Professional) 化工矿山企业施工图设计内容和深度的规定——矿山专业 |
China Chemical Industry
Standards mining |
English PDF |
| HG/T 22805.14-1993 |
(Provisions of chemical mining enterprise construction design content and depth - machine repair professional) 化工矿山企业施工图设计内容和深度的规定——机修专业 |
China Chemical Industry
Standards mining |
English PDF |
| HG/T 22805.13-1993 |
(Chemical mining enterprise construction design content and depth requirement - controlled professional) 化工矿山企业施工图设计内容和深度的规定——自控专业 |
China Chemical Industry
Standards mining |
English PDF |
| HG/T 22805.12-1993 |
(Provisions of the construction design of chemical mining enterprise content and depth - Telecom Professional) 化工矿山企业施工图设计内容和深度的规定——电信专业 |
China Chemical Industry
Standards mining |
English PDF |
| HG/T 22805.11-1993 |
(Provisions of chemical mining enterprise construction design content and depth - electrical engineering) 化工矿山企业施工图设计内容和深度的规定——电气专业 |
China Chemical Industry
Standards mining |
English PDF |
| HG/T 22805.10-1993 |
(Provisions of chemical mining enterprise construction design content and depth - water supply and drainage) 化工矿山企业施工图设计内容和深度的规定——给排水专业 |
China Chemical Industry
Standards mining |
English PDF |
| HG/T 2401-1992 |
(mining boots) |
China Chemical Industry
Standards mining |
English PDF |
| DL 418-1991 |
Method for determining breakdown voltage of insulating liquid from impact of thunder and lightning 绝缘液体雷电冲击击穿电压测定法 |
China Electricity & Power
Standards mining |
English PDF |
| Find out:185Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
