Cart:
 |
China GB Standards list issued in 2012 year |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 9630-2012 |
Dimensions of pot-cores made of magnetic oxides and associated parts 磁性氧化物制成的罐形磁心及其附件的尺寸 |
China National Standards 2012 |
 English PDF |
| GB/T 9532-2012 |
Designations for piezoelectric crystals 压电单晶材料型号命名方法 |
China National Standards 2012 |
English PDF |
| GB/T 9435-2012 |
Useful screen dimensions for color picture tubes 彩色显像管有效屏面尺寸 |
China National Standards 2012 |
English PDF |
| GB/T 7826-2012 |
Analysis techniques for system reliability - Procedure for failure mode and effects analysis（FMEA） 系统可靠性分析技术 失效模式和影响分析（FMEA）程序 |
China National Standards 2012 |
English PDF |
| GB/T 7333-2012 |
Fixed capacitors for use in electronic equipment - Part 2-1: Blank detail specification - Fixed metallized polyethylene-terephthalate film dielectric d.c.capacitors - Assessment levels E and EZ 电子设备用固定电容器 第2-1部分：空白详细规范 金属化聚乙烯对苯二甲酸酯膜介质 直流固定电容器 评定水平E和EZ |
China National Standards 2012 |
English PDF |
| GB/T 6996-2012 |
Test charts of transparencies for television 透射式电视测试图 |
China National Standards 2012 |
English PDF |
| GB/T 6379.3-2012 |
Accuracy(trueness and precision) of measurement methods and results - Part 3：Intermediate measures of the precision of a standard measurement method 测量方法与结果的准确度(正确度与精密度) 第3部分：标准测量方法精密度的中间度量 |
China National Standards 2012 |
English PDF |
| GB/T 5969-2012 |
Fixed capacitors for use in electronic equipment - Part 9-1: Blank detail specification：Fixed capacitor of ceramic dielectric,Class 2 - Assessment level EZ 电子设备用固定电容器 第9-1部分:空白详细规范 2类瓷介固定电容器 评定水平 EZ |
China National Standards 2012 |
English PDF |
| GB/T 5295-2012 |
The spectral response characteristic series of photocathodes 光阴极光谱响应特性系列 |
China National Standards 2012 |
English PDF |
| GB/T 5080.2-2012 |
Reliability testing - Part 2: Design of test cycles 可靠性试验 第2部分：试验周期设计 |
China National Standards 2012 |
English PDF |
| GB/T 5080.1-2012 |
Reliability testing - Part 1: Test conditions and statistical test principles 可靠性试验 第1部分：试验条件和统计检验原理 |
China National Standards 2012 |
English PDF |
| GB/T 4937.4-2012 |
Semiconductor devices - Mechanical and climatic test methods - Part 4: Damp heat, steady state, highly accelerated stress test (HAST) 半导体器件 机械和气候试验方法 第4部分：强加速稳态湿热试验（HAST） |
China National Standards 2012 |
English PDF |
| GB/T 4937.3-2012 |
Semiconductor devices - Mechanical and climatic tests methods - Part 3: External visual examination 半导体器件 机械和气候试验方法 第3部分：外部目检 |
China National Standards 2012 |
English PDF |
| GB/T 4597-2012 |
Vocabulary of electronic tubes 电子管词汇 |
China National Standards 2012 |
English PDF |
| GB/T 3352-2012 |
Synthetic quartz crystal － Specifications and guide to the use 人造石英晶体 规范与使用指南 |
China National Standards 2012 |
English PDF |
| GB/T 28880-2012 |
Non-destructive testing - Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments 无损检测 不用电子测量仪器对脉冲反射式超声检测系统性能特性的评定 |
China National Standards 2012 |
English PDF |
| GB/T 28879-2012 |
Nomenclature of model for electrotechnical instruments 电工仪器仪表产品型号编制方法 |
China National Standards 2012 |
English PDF |
| GB/T 28878.1-2012 |
Specification of the rotating component in space science experiments - Part 1：General requirements of design 空间科学实验转动部件规范 第1部分：设计总则 |
China National Standards 2012 |
English PDF |
| GB/T 28877-2012 |
General requirements for space science experiments 空间科学实验通用要求 |
China National Standards 2012 |
English PDF |
| GB/T 28876.1-2012 |
Flammability of materials in space experimental facilities - Part 1: Requirements 空间实验设备使用材料的可燃性 第1部分：要求 |
China National Standards 2012 |
English PDF |
| GB/T 28875-2012 |
Space science experiment - Requirement for biological samples 空间科学实验 生物样品要求 |
China National Standards 2012 |
English PDF |
| GB/T 28874-2012 |
Specification for level of data products for space science experiments 空间科学实验数据产品分级规范 |
China National Standards 2012 |
English PDF |
| GB/T 28873-2012 |
General guide of environmental scanning electron microscopy for biological effects on topography induced by nanoparticles 纳米颗粒生物形貌效应的环境扫描电子显微镜检测方法通则 |
China National Standards 2012 |
English PDF |
| GB/T 28872-2012 |
Testing method of magnetic lightly-striking mode atomic force microscope for nanotopography of living cells 活细胞样品纳米结构的磁驱动轻敲模式原子力显微镜检测方法 |
China National Standards 2012 |
English PDF |
| GB/T 28871-2012 |
Critical current measurement-DC critical current of Nb3Sn composite superconductors 铌三锡（Nb3Sn）复合超导体的直流临界电流测量 |
China National Standards 2012 |
English PDF |
| GB/T 28869.1-2012 |
Cores made of soft magnetic materials - Measuring methods - Part 1：Generic specification 软磁材料制成的磁心 测量方法 第1部分：通用规范 |
China National Standards 2012 |
English PDF |
| GB/T 28868-2012 |
Dimensions of uncoated ring cores of magnetic oxides 未经涂覆的磁性氧化物环形磁心的尺寸 |
China National Standards 2012 |
English PDF |
| GB/T 28867-2012 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells 含碱性或其它非酸性电解质的蓄电池和蓄电池组 方形密封镉镍单体蓄电池 |
China National Standards 2012 |
English PDF |
| GB/T 28866-2012 |
Characteristic parameters of stand-alone photovoltaic(PV) systems 独立光伏（PV）系统的特性参数 |
China National Standards 2012 |
English PDF |
| GB/T 28864.2-2012 |
Terms and nomenclature for cores made of magnetically soft ferrites - Part 2: Reference of dimensions 软磁铁氧体磁心术语定义 第2部分：尺寸标注 |
China National Standards 2012 |
English PDF |
| GB/T 28864.1-2012 |
Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities 软磁铁氧体磁心术语定义 第1部分：物理缺陷术语 |
China National Standards 2012 |
English PDF |
| GB/T 28863-2012 |
Sampling inspection procedures for commodity applying to the case with prior information of quality 商品质量监督抽样检验程序 具有先验质量信息的情形 |
China National Standards 2012 |
English PDF |
| GB/T 28862-2012 |
Method for processing sample of encapsulating material of powdered epoxy 环氧粉末包封料试样加工方法 |
China National Standards 2012 |
English PDF |
| GB/T 28861-2012 |
Test method for measuring melt fluidity of encapsulating material of powdered epoxy 环氧粉末包封料熔融流动性试验方法 |
China National Standards 2012 |
English PDF |
| GB/T 28860-2012 |
Test method for the determination of get time of encapsulating material of powdered epoxy 环氧粉末包封料胶化时间测定方法 |
China National Standards 2012 |
English PDF |
| GB/T 28859-2012 |
Encapsulating material of powdered epoxy for electronic components 电子元器件用环氧粉末包封料 |
China National Standards 2012 |
English PDF |
| GB/T 28858-2012 |
Encapsulating material of phenolic for electronic components 电子元器件用酚醛包封料 |
China National Standards 2012 |
English PDF |
| GB/T 28857-2012 |
Direct-current linear variable differential transformer (DC-DC LVDT)displacement transducers 直流差动变压器式位移传感器 |
China National Standards 2012 |
English PDF |
| GB/T 28856-2012 |
Silicon piezoresistive pressure-sensitive chip 硅压阻式压力敏感芯片 |
China National Standards 2012 |
English PDF |
| GB/T 28855-2012 |
Silicon-based pressure sensors 硅基压力传感器 |
China National Standards 2012 |
English PDF |
| GB/T 28854-2012 |
Silicon capacitive pressure sensor 硅电容式压力传感器 |
China National Standards 2012 |
English PDF |
| GB/T 28853-2012 |
Thermostatic baths and circulators - Heated circulators 恒温槽与恒温循环装置 高温恒温循环装置 |
China National Standards 2012 |
English PDF |
| GB/T 28852-2012 |
Specifications for climatic chambers for biological applications 生物人工气候试验箱技术条件 |
China National Standards 2012 |
English PDF |
| GB/T 28851-2012 |
Specifications for refrigerated incubators 生化培养箱技术条件 |
China National Standards 2012 |
English PDF |
| GB/T 28850-2012 |
Thermostatic baths and circulators - Heated liquid baths 恒温槽与恒温循环装置 高温恒温槽 |
China National Standards 2012 |
English PDF |
| GB/T 28849-2012 |
SX series experimental box-shape resistance furnace SX系列实验用箱式电阻炉 |
China National Standards 2012 |
English PDF |
| GB/T 28848-2012 |
Intelligent gas flow meter 智能气体流量计 |
China National Standards 2012 |
English PDF |
| GB/T 28847.3-2012 |
Building automation and control systems - Part 3：Function 建筑自动化和控制系统 第3部分：功能 |
China National Standards 2012 |
English PDF |
| GB/T 28847.2-2012 |
Building automation and control systems - Part 2：Hardware 建筑自动化和控制系统 第2部分：硬件 |
China National Standards 2012 |
English PDF |
| GB/T 28847.1-2012 |
Building automation and control systems - Part 1：Summarize 建筑自动化和控制系统 第1部分：概述 |
China National Standards 2012 |
English PDF |
| GB/T 2828.1-2012 |
Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection 计数抽样检验程序 第1部分：按接收质量限(AQL)检索的逐批检验抽样计划 |
China National Standards 2012 |
English PDF |
| GB/T 26831.3-2012 |
Society energy metering for reading system specification - Part 3: Dedicated application layer 社区能源计量抄收系统规范 第3部分：专用应用层 |
China National Standards 2012 |
English PDF |
| GB/T 26831.2-2012 |
Society energy metering for reading system specification - Part 2: Physical and link layer 社区能源计量抄收系统规范 第2部分：物理层与链路层 |
China National Standards 2012 |
English PDF |
| GB/T 19114.44-2012 |
Industrial automation systems and integration - Industrial manufacturing management data - Part 44: Information modelling for shop floor data acquisition 工业自动化系统与集成 工业制造管理数据 第44部分：车间级数据采集的信息建模 |
China National Standards 2012 |
English PDF |
| GB/T 18910.61-2012 |
Liquid crystal display devices - Part 6-1: Measuring methods for liquid crystal display devices - Photoelectric parameter 液晶显示器件 第6-1部分：液晶显示器件测试方法 光电参数 |
China National Standards 2012 |
English PDF |
| GB/T 18910.11-2012 |
Liquid crystal display devices - Part 1-1: Terminology and symbols 液晶显示器件 第1-1部分：术语和符号 |
China National Standards 2012 |
English PDF |
| GB/T 18216.5-2012 |
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth 交流1000V和直流1500V以下低压配电系统电气安全 防护措施的试验、测量或监控设备 第5部分：对地阻抗 |
China National Standards 2012 |
English PDF |
| GB/T 18216.4-2012 |
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding 交流1000V和直流1500V以下低压配电系统电气安全 防护措施的试验、测量或监控设备 第4部分：接地电阻和等电位接地电阻 |
China National Standards 2012 |
English PDF |
| GB/T 18216.3-2012 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance 交流1000V和直流1500V以下低压配电系统电气安全 防护措施的试验、测量或监控设备 第3部分：环路阻抗 |
China National Standards 2012 |
English PDF |
| GB/T 18216.2-2012 |
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance 交流1000V和直流1500V以下低压配电系统电气安全 防护措施的试验、测量或监控设备 第2部分：绝缘电阻 |
China National Standards 2012 |
English PDF |
| GB/T 18216.1-2012 |
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements 交流1000V和直流1500V以下低压配电系统电气安全 防护措施的试验、测量或监控设备 第1部分：通用要求 |
China National Standards 2012 |
English PDF |
| GB/T 17249.3-2012 |
Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 3: Sound propagation and noise prediction in workrooms 声学 低噪声工作场所设计指南 第3部分：工作间内的声传播和噪声预测 |
China National Standards 2012 |
English PDF |
| GB/T 17207-2012 |
Fixed capacitors for use in electronic equipment - Part 18-1: Blank detail specification - Fixed aluminium electrolytic surface mount - Capacitors with solid(MnO2) electrolyte - Assessment level EZ 电子设备用固定电容器 第18-1部分：空白详细规范 表面安装固体(MnO2)电解质铝固定电容器 评定水平EZ |
China National Standards 2012 |
English PDF |
| GB/T 16608.55-2012 |
Electromechanical all-or-nothing relays - Part 55: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 11mm×7,5mm (max)base 有或无机电继电器 第55部分：空白详细规范 电信用有质量评定的有或无机电继电器 两组转换触点，11mm×7.5mm(最大)底座 |
China National Standards 2012 |
English PDF |
| GB/T 16608.54-2012 |
Electromechanical all-or-nothing relays - Part 54: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15mm×7,5mm base 有或无机电继电器 第54部分：空白详细规范 电信用有质量评定的有或无机电继电器 两组转换触点，15mm×7.5mm底座 |
China National Standards 2012 |
English PDF |
| GB/T 16608.53-2012 |
Electromechanical all-or-nothing relays - Part 53: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 14mm×9mm base 有或无机电继电器 第53部分：空白详细规范 电信用有质量评定的有或无机电继电器 两组转换触点，14mm×9mm底座 |
China National Standards 2012 |
English PDF |
| GB/T 16608.52-2012 |
Electromechanical all-or-nothing relays - Part 52: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 20mm×10mm base 有或无机电继电器 第52部分：空白详细规范 电信用有质量评定的有或无机电继电器 两组转换触点，20mm×10mm底座 |
China National Standards 2012 |
English PDF |
| GB/T 16608.51-2012 |
Electromechanical all-or-nothing relays - Part 51: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Non-standardized types and construction 有或无机电继电器 第51部分：空白详细规范 电信用有质量评定的有或无机电继电器 非标准类型和结构 |
China National Standards 2012 |
English PDF |
| GB/T 16608.50-2012 |
Electromechanical all-or-nothing relays - Part 50: Sectional specification - Electromechanical all-or-nothing telecom relays of assessed quality 有或无机电继电器 第50部分：分规范 电信用有质量评定的有或无机电继电器 |
China National Standards 2012 |
English PDF |
| GB/T 15862-2012 |
General specification of ion implantation equipment 离子注入机通用规范 |
China National Standards 2012 |
English PDF |
| GB/T 15861-2012 |
General specification of ion beam etching system 离子束蚀刻机通用规范 |
China National Standards 2012 |
English PDF |
| GB/T 15566.11-2012 |
Guidance system for public information - Setting principles and requirement - Part 11: Vehicle parking lot 公共信息导向系统 设置原则与要求 第11部分：机动车停车场 |
China National Standards 2012 |
English PDF |
| GB/T 15490-2012 |
General specification for solid state lasers 固体激光器总规范 |
China National Standards 2012 |
English PDF |
| GB/T 15290-2012 |
Generic specification of power supply transformers and filter chokes for use in electronic equipment 电子设备用电源变压器和滤波扼流圈总技术条件 |
China National Standards 2012 |
English PDF |
| GB/T 12859.2-2012 |
Piezoelectric ceramic resonators - A specification in the IEC quality assessment System for electronic components (IECQ) - Part 2: Sectional specification-Qualification approval 电子元器件质量评定体系规范 压电陶瓷谐振器 第2部分：分规范- 鉴定批准 |
China National Standards 2012 |
English PDF |
| GB/T 12859.201-2012 |
Piezoelectric ceramic resonators - A specification in the quality assessment System for electronic components - Part 2-1: Blank detail specification-Assessment level E 电子元器件质量评定体系规范 压电陶瓷谐振器 第2-1部分：空白详细规范-评定水平E |
China National Standards 2012 |
English PDF |
| GB/T 12859.1-2012 |
Piezoelectric ceramic resonators - A specification in the IEC quality assessment System for electronic components(IECQ) - Part 1: Generic specification-Qualification approval 电子元器件质量评定体系规范 压电陶瓷谐振器 第1部分：总规范- 鉴定批准 |
China National Standards 2012 |
English PDF |
| GB/T 12798-2012 |
Axial lead cores made of magnetic oxides or iron powder 磁性氧化物或铁粉制成的轴向引线磁心 |
China National Standards 2012 |
English PDF |
| GB/T 12796.1-2012 |
Permanent ferrite magnets - Part 1: Generic specification 永磁铁氧体磁体 第1部分：总规范 |
China National Standards 2012 |
English PDF |
| GB/T 12274.1-2012 |
Quartz crystal controlled oscillators of assessed quality - Part 1: Generic specification 有质量评定的石英晶体振荡器 第1部分：总规范 |
China National Standards 2012 |
English PDF |
| GB/T 12273.501-2012 |
Quartz crystal units A specification in the quality assessment system for electronic components Part 5.1: Blank detail specification- qualification approval 石英晶体元件 电子元器件质量评定体系规范 第5.1部分：空白详细规范 鉴定批准 |
China National Standards 2012 |
English PDF |
| GB/T 12083-2012 |
Power supply series for gas laser 气体激光器电源系列 |
China National Standards 2012 |
English PDF |
| GB/T 12079-2012 |
Measurements of the photoelectric properties for X-ray tubes X射线管光电性能测试方法 |
China National Standards 2012 |
English PDF |
| GB/T 12078-2012 |
General specification for X-ray tubes X 射线管总规范 |
China National Standards 2012 |
English PDF |
| GB/T 15566.9-2012 |
Public information guidance system - Setting principles and requirements - Part 9: Tourist attraction 公共信息导向系统 设置原则与要求 第9部分：旅游景区 |
China National Standards 2012 |
English PDF |
| GB/T 10190-2012 |
Fixed capacitors for use in electronic equipment - Part 16: Sectional specification：Fixed metallized polypropylene film dielectric d.c.capacitors 电子设备用固定电容器 第16部分: 分规范 金属化聚丙烯膜介质直流固定电容器 |
China National Standards 2012 |
English PDF |
| GB/T 10186-2012 |
Fixed capacitors for use in electronic equipment - Part 7-1: Blank detail spicification - Fixed polystyrene film dielectric metal foil d.c. capacitors - Assessment level E 电子设备用固定电容器 第7-1部分：空白详细规范 金属箔式聚苯乙烯膜介质直流固定电容器 评定水平E |
China National Standards 2012 |
English PDF |
| GB/T 10185-2012 |
Fixed capacitors for use in electric equipment - Part 7: Sectional specification Fixed polystyrene film dielectric metal foil d.c. capacitors 电子设备用固定电容器 第7部分：分规范 金属箔式聚苯乙烯膜介质直流固定电容器 |
China National Standards 2012 |
English PDF |
| GB/T 28926-2012 |
Information technology - Radio frequency identification - Conformance test methods for air interface at 2.45GHz 信息技术 射频识别 2.45GHz空中接口符合性测试方法 |
China National Standards 2012 |
English PDF |
| GB/T 28925-2012 |
Information technology - Radio frequency identification - Air interface protocol at 2.45 GHz 信息技术 射频识别 2.45GHz空中接口协议 |
China National Standards 2012 |
English PDF |
| GB/Z 28828-2012 |
Information security technology - Guideline for personal information protection within information system for public and commercial services 信息安全技术 公共及商用服务信息系统个人信息保护指南 |
China National Standards 2012 |
English PDF |
| GB/Z 28820.3-2012 |
Long-term radiation ageing in polymers - Part 3: Procedures for in-service monitoring of low-voltage cable materials 聚合物长期辐射老化 第3部分：低压电缆材料在役监测程序 |
China National Standards 2012 |
English PDF |
| GB/Z 28820.2-2012 |
Long-term radiation ageing in polymers - Part 2: Procedures for predicting ageing at low dose rates 聚合物长期辐射老化 第2部分：预测低剂量率下老化的程序 |
China National Standards 2012 |
English PDF |
| GB/Z 28820.1-2012 |
Long-term radiation ageing in polymers - Part 1: Techniques for monitoring diffusion-limited oxidation 聚合物长期辐射老化 第1部分：监测扩散限制氧化的技术 |
China National Standards 2012 |
English PDF |
| GB/Z 28818-2012 |
Selection guide for polymeric materials for outdoor use under HV stress 高电压下户外用聚合物材料的选用导则 |
China National Standards 2012 |
English PDF |
| GB/T 9536-2012 |
Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification 电气和电子设备用机电开关 第1部分：总规范 |
China National Standards 2012 |
English PDF |
| GB/T 8905-2012 |
The guide for management and measuring SF6 gas in electrical equipment 六氟化硫电气设备中气体管理和检测导则 |
China National Standards 2012 |
English PDF |
| GB/Z 25842.2-2012 |
Low-voltage switchgear and controlgear - Over-current protective devices - Part 2: Selectivity under over-current conditions 低压开关设备和控制设备 过电流保护电器 第2部分：过电流条件下的选择性 |
China National Standards 2012 |
English PDF |
| GB/T 4798.9-2012 |
Classification of environmental conditions - Classification of groups of environmental parameters and their severities - Microclimates inside products 环境条件分类 环境参数组分类及其严酷程度分级 产品内部的微气候 |
China National Standards 2012 |
English PDF |
| GB/T 4798.6-2012 |
Classification of environmental conditions - Classification of groups of environmental parameters and their severities - Ship evironment 环境条件分类 环境参数组分类及其严酷程度分级 船用 |
China National Standards 2012 |
English PDF |
| Find out:2222Items | To Page of: First -Previous-Next -Last | [7] [8] [9] [10] [11] [12] [13] |
+86-755-25831330
