Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| SY/T 6103-2004 |
Measurement of rock pore structure Method of image analysis 岩石孔隙结构特征的测定 图像分析法 |
China Oil & Gas Industry Standards |
 English PDF |
| SY/T 6058-2004 |
Operation procedures for lifting and laying down of self-electing mast 自升式井架起放作业规程 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5956-2004 |
Technical regulations of drill etring abandonment 钻具报废技术条件 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5955-2004 |
Trajectory quality for directional well 定向井井身轨迹质量 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5954-2004 |
Inspection items and requirements prior to spudding 开钻前验收项目及要求 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5913-2004 |
Rock thin section preparation 岩石制片方法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5904-2004 |
Recommended practice for sizing and selection of electric submersible pump installation 潜油电泵选井原则及选泵设计方法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5615-2004 |
Drawing specification and pattern for oil and gas geology exploration 石油天然气地质编图规范及图式 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5590-2004 |
Evaluation method for profile control agents properties 调剖剂性能评价方法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5587.5-2004 |
Codes for conventional workover job. Part 5: Preparation of well bore for downhole operation 常规修井作业规程 第5部分：井下作业井筒准备 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5587.4-2004 |
Codes for conventional workover job. Part 4: Finding and sealing of casing leak for cased wells 常规修井作业规程 第4部分：找串漏、封串堵漏 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5587.12-2004 |
Codes for conventional workover job. Part 12: Fishing 常规修井作业规程 第12部分：打捞落物 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5360-2004 |
The processing procedure of single well logging data in open hole 裸眼井单井测井数据处理流程 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 10051.1-2004 |
Specification for carbon manganese steel plate with improved toughness for offshore structure 海上结构用改良韧性的碳锰钢板规范 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 10050-2004 |
The specification of environment conditions and environmental loads 环境条件和环境荷载规范 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 10049-2004 |
Recommended practice for fatigue strength analysis of offshore steel structures 海上钢结构疲劳强度分析推荐作法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 0330-2004 |
Recommend practice for movement of in-service pipelines 现役管道的不停输移动推荐作法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 0329-2004 |
Test methods of large oil tank foundations 大型油罐基础检测方法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 0328-2004 |
Standard for the method of the internal girth weld coating with the metal powder jetting under the torch welding 管道焊口内喷焊防腐技术标准 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 0061-2004 |
Technical specification of external protective organic coating for buried steel pipeline 埋地钢质管道外壁有机防腐层技术规范 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 10030-2004 |
Recommended practice for planning, designing, and constructing fixed offshore platforms. Working stress design 海上固定平台规划、设计和建造的推荐作法 工作应力设计法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6580-2004 |
Quantities and units frequently used in oil and gas exploration and development 石油天然气勘探开发常用量和单位 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6582.4-2003 |
The calibration for petroleum nuclear logging tool. Part 4: The calibration for compensated neutron tool 石油核测井仪刻度 第4部分：补偿中子测井仪刻度 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6582.3-2003 |
The calibration for petroleum nuclear logging tool. Part 3: The calibration for compensated density/litho-density tool 石油核测井仪刻度 第3部分：补偿密度/岩性密度测井仪刻度 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6582.2-2003 |
The calibration for petroleum nuclear logging tool. Part 2: The calibration for natural gamma-ray logging tool 石油核测井仪刻度 第2部分：自然伽马测井仪刻度 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6582.1-2003 |
The calibration for petroleum nuclear logging tool. Part 1: General rules 石油核测井仪刻度 第1部分：总则 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6579-2003 |
The calibration method for density tool 密度测井仪校准方法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6574-2003 |
Technical requirement of oil field development project upper evaluation 油田开发新区产能建设项目后评估技术要求 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6572-2003 |
Evaluation methods of resin performance for sand control 防砂用树脂性能评价方法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6570-2003 |
Regulations drafted for the lift technology design of oil-wells 油井举升工艺设计编写规范 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6553-2003 |
Piping inspection code Inspection, repair, alteration, and rerating of in-service piping SYstems 管道检验规范 在用管道系统检验、修理、改造和再定级 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6542-2003 |
Core particle sizer 岩心粒度分析仪 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6541-2003 |
Environmental test and reliability for geophysical exploration instrument 物探仪器环境试验及可靠性要求 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6009.9-2003 |
Test method of samples of geochemical exploration for oil and gas. Part 9: Determination of the gross amount of aromatic hydrocarbons and their ramifications Ultraviolet spectroscopy 油气化探试样测定方法 第9部分：芳烃及其衍生物总量测定 紫外光谱法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6009.8-2003 |
Test method of samples of geochemical exploration for oil and gas. Part 8: Determination of the polynuclear aromatic hydrocarbons. Fluorometry 油气化探试样测定方法 第8部分：稠环芳烃测定荧光法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6009.7-2003 |
Test method of samples of geochemical exploration for oil and gas. Part 7: Determination of thermal released mercury 油气化探试样测定方法 第7部分：热释汞测定 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6009.6-2003 |
Test method of samples of geochemical exploration for oil and gas. Part 6: Determination of alterative carbonate (△C) 油气化探试样测定方法 第6部分：蚀变碳酸盐(△C)测定 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6009.5-2003 |
Test method of samples of geochemical exploration for oil and gas. Part 5: Determination of free hydrocarbons. Gas chromatography 油气化探试样测定方法 第5部分：游离烃测定气相色谱法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6009.4-2003 |
Test method of samples of geochemical exploration for oil and gas. Part 4: Determination of thermal released hydrocarbons Gas chromatography 油气化探试样测定方法 第4部分：热释烃测定气相色谱法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6009.3-2003 |
Test method of samples of geochemical exploration for oil and gas Part 3: Determination of light hydrocarbons in head space. Gas chromatography 油气化探试样测定方法 第3部分：顶空间轻烃测定气相色谱法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6009.2-2003 |
Test method of samples of geochemical exploration for oil and gas. Part 2: Determination of soluble hydrocarbons. Gas chromatography 油气化探试样测定方法 第2部分：溶解烃测定气相色谱法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6009.1-2003 |
Test method of samples of geochemical exploration for oil and gas. Part 1: Determination of acidolysis hydrocarbons. Gas chromatography 油气化探试样测定方法 第1部分：酸解烃测定气相色谱法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5842-2003 |
Technical requirements of compiling the development plan of sandstone oil field development geology and reservoir engineering 砂岩油田开发方案编制技术要求开发地质油藏工程部分 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5810-2003 |
Design and downhole operation of continuous gas lift 连续气举采油井设计及施工作业 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5792-2003 |
Technical demands on whisper operation and well completion 侧钻井施工作业及完井工艺要求 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5678-2003 |
The rules for checking and accepting completed well 钻井液净化系统卧式离心机 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5478-2003 |
The division of diagenetic stages in carbonate rocks 碳酸盐岩成岩阶段划分 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5477-2003 |
The division of diagenetic stages in clastic rocks 碎屑岩成岩阶段划分 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5044-2003 |
Beam pumping units 游梁式抽油机 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 10047-2003 |
Specifications for environmental protection design of offshore oil/gas field development 海上油(气)田开发工程环境保护设计规范 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 10045-2003 |
Application of safety instrumented SYstems for the process industries 工业生产过程中安全仪表系统的应用 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6540-2002 |
Lab testing method of drilling and completion fluids damaging oil formation 钻井液完井液损害油层室内评价方法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6539-2002 |
The checking items and technical specifications for BOX seismic data acquisition SYstem BOX地震数据采集系统检验项目及技术指标 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6535-2002 |
The underground storage well for high-compression gas 高压气地下储气井 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6532-2002 |
The calibration method for induced polarization instrument 激发极化仪校准方法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6531-2002 |
Longitudinal electric resistance welded steel pipes for pump barrel 油井泵体用直缝电阻焊钢管 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6528-2002 |
Test method of the rock dielectric constant 岩样介电常数测量方法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6526-2002 |
Measuring method of dynamic reaction rate for hydrochloric acid with carbonate rock 盐酸与碳酸盐岩动态反应速率测定方法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6525-2002 |
Recommended practice for water drainage and gas production by foaming method 泡沫排水采气推荐作法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5946-2002 |
Potassium polyacrylamide for drilling fluid 钻井液用聚丙烯酰胺钾盐 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5849-2002 |
The method for economic effect evaluation of removing plugging by chemicals in production and injection well 油水井化学剂解堵经济效果评价方法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5790-2002 |
Process of casing reformation and strengthening seal 套管整形与密封加固工艺作法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5298-2002 |
Marine loading arms 港口装卸用输油臂 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5092-2002 |
Sufonated lignite for drilling fluid(SMC) 钻井液用磺化褐煤SMC |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 10044-2002 |
Sizing, selection and installation of pressure-relieving devices in refineries 炼油厂压力泄放装置的尺寸确定、选择和安装的推荐作法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 10043-2002 |
Guide for pressure. relieving and depressuring SYstems 泄压和减压系统指南 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 10042-2002 |
Recommended Practice for design and installation of offshore production platform piping SYstems 海上生产平台管道系统设计和安装的推荐作法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 10028-2002 |
Specification for drawings of offshore oil development engineering 海洋石油工程制图规范 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 10009-2002 |
Supplement 1 to recommended practice for planning, designing and constructing fixed offshore platform. Load and resistance factor design 海上固定平台规划、设计和建造的推荐作法—荷载抗力系数设计法（增补1） |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 0042-2002 |
Calculation standard of economic appraisals for corrosion control project 防腐蚀工程经济计算方法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5161-2002 |
Determination of some metal elements in rocks by atomic absorption spectrometry 岩石中金属元素原子吸收光谱测定方法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 10041-2002 |
Recommended practice for classification of locations for electrical installations at petroleum facilities classified as class I, division 1 and division 2 石油设施电气设备安装一级一类和二类区域划分的推荐作法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 10038-2002 |
Recommended practice for planning, designing, and construcing heliports for fixed offshore platforms 海上固定平台直升机场规划、设计和建造的推荐作法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 0325-2001 |
Steel pipelines crossing railroads and highways 钢质管道穿越铁路和公路推荐做法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6512-2000 |
Technical requirement of drawing up a feasible EOR project chemical flooding 三次采油可行性方案编制技术要求 化学驱部分 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5516-2000 |
Chemical analysis method for carbonate rocks 碳酸盐岩化学分析方法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5387-2000 |
Technological requirement of geology for conventional oil reservoir production test 常规原油油藏试采地质技术要求 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5270-2000 |
Technical regulation of design for high pressure water injection fittings 高压注水管路配件设计技术规定 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 0095-2000 |
Test method for laboratory evaluation of magnesium sacrificial anode test specimens for underground applications 埋地镁牺牲阳极试样试验室评价的试验方法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 0065-2000 |
Standard test method for abrasion resistance of pipeline coatings (Drum) 管道防腐层耐磨性能试验方法（滚筒法） |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 0064-2000 |
Standard test method for water penetration into pipeline coatings 管道防腐层水渗透性试验方法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 0062-2000 |
Standard test method for penetration resistance of pipeline coatings (Blunt rod) 管道防腐层针入度试验方法（钝杆法） |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6497-2000 |
Universal couplings for oil drilling rig 石油钻机用万向联轴器 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6493-2000 |
Specification for value transfer in nuclear well logging tools 核测井仪器量值传递规程 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6492-2000 |
Specification for acoustic logging calibration device 声速测井仪器刻度装置技术规范 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6489-2000 |
Specification for horizontal well log processing and interpretation 水平井测井资料处理解释规范 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6488-2000 |
Specification for electric/sonic image processing and interpretation 电、声成像测井资料处理解释规范 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6486-2000 |
Recommended opertional method for preventing of clay-swelling and fine-migration in acidizing of water injection well 注水井酸化中粘土防膨与微粒防运移工艺规范 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6485-2000 |
Specification for oil production engineering project in polymer flooding 聚合物驱采油工程方案设计编写规范 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6482-2000 |
Data transmission cable tester 数传电缆测试仪 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 6481-2000 |
Pressure-volume-temperature (PVT) cell 原油高压物性分析仪 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5497-2000 |
Materials and equipment classification and code for the petroleum industry 石油工业物资分类与代码 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 5276-2000 |
Test method for flexural strength, compression strength and air permeability of chemical sand consolidation in man-made core 化学防砂人工岩心抗折强度、抗压强度及气体渗透率的测定 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 0323-2000 |
Code for construction and acceptance of glass fiber reinforced thermosetting resin pressure pipelines 玻璃纤维增强热固性树脂压力管道施工及验收规范 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 10036-2001 |
Specification for Compiling the Design Documents of Offshore Oil Development Engineering 海洋石油工程设计文件编制规程 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 10006-2000 |
Specification for Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service 海上井口地面安全阀和水下安全阀规范 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 10002-2000 |
Specification for the Fabrication of Structural Steel Pipe 结构钢管制造规范 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 10034-2000 |
Recommended Practice for Fire Prevention and Control on Open Type Offshore Production Platforms 敞开式海上生产平台防火与消防的推荐作法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 10033-2000 |
Recommended Practice for Analysis, Design, Installation and Testing of Basic Surface SYstems for Offshore Production Platforms 海上生产平台基本上部设施安全系统的分析、设计、安装和测试的推荐作法 |
China Oil & Gas Industry Standards |
English PDF |
| SY/T 10032-2000 |
Rules For Building and Classing Single Point Moorings 单点系泊装置建造与人级规范 |
China Oil & Gas Industry Standards |
English PDF |
| Find out:2392Items | To Page of: First -Previous-Next -Last | [14] [15] [16] [17] [18] [19] [20] |
+86-755-25831330
