Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 14480.3-2020 |
Non-destructive testing Instruments—Equipment for eddy current examination—Part 3: System characteristics and verification 无损检测仪器 涡流检测设备 第3部分：系统性能和检验 |
China National Standards Instrument |
 English PDF |
| GB/T 32065.8-2020 |
Environmental test methods for oceanographic Instruments—Part 8：Change of temperature test 海洋仪器环境试验方法 第8部分：温度变化试验 |
China National Standards Instrument |
English PDF |
| GB/T 32065.19-2020 |
Environmental test methods for oceanographic Instruments—Part 19 : Immersion test 海洋仪器环境试验方法 第19部分：浸渍试验 |
China National Standards Instrument |
English PDF |
| GB/T 32065.10-2020 |
Environmental test methods for oceanographic Instruments—Part 10：Salt fog test 海洋仪器环境试验方法 第10部分：盐雾试验 |
China National Standards Instrument |
English PDF |
| GB/T 21296.5-2020 |
Automatic Instruments for weighing road vehicles in motion—Part 5：Crystal quartz type 动态公路车辆自动衡器 第5部分：石英晶体式 |
China National Standards Instrument |
English PDF |
| GB/T 21296.4-2020 |
Automatic Instruments for weighing road vehicles in motion─Part 4：Bending plate type 动态公路车辆自动衡器 第4部分：弯板式 |
China National Standards Instrument |
English PDF |
| GB/T 21296.3-2020 |
Automatic Instruments for weighing road vehicles in motion—Part 3：Weighing axle loads 动态公路车辆自动衡器 第3部分：轴重式 |
China National Standards Instrument |
English PDF |
| GB/T 21296.2-2020 |
Automatic Instruments for weighing road vehicles in motion—Part 2：Weighing whole loads 动态公路车辆自动衡器 第2部分：整车式 |
China National Standards Instrument |
English PDF |
| GB/T 21296.1-2020 |
Automatic Instruments for weighing road vehicles in motion─Part 1：General technical specification 动态公路车辆自动衡器 第1部分：通用技术规范 |
China National Standards Instrument |
English PDF |
| GB/T 12787-2020 |
Radiation protection Instrumentation—Warning equipment for criticality accidents 辐射防护仪器 临界事故报警设备 |
China National Standards Instrument |
English PDF |
| GB/T 335-2019 |
Non-self-indicating Instrument 非自行指示秤 |
China National Standards Instrument |
English PDF |
| GB/T 19836-2019 |
Instrumentation for elctric vehicles 电动汽车仪表 |
China National Standards Instrument |
English PDF |
| GB 38455-2019 |
Ophthalmic Instruments—Ophthalmometers 眼科仪器 角膜曲率计 |
China National Standards Instrument |
English PDF |
| GB/T 37930-2019 |
Non-destructive testing Instruments—Technical specifications of X-ray real-time imaging system for automobile wheel 无损检测仪器 汽车轮毂X射线实时成像检测仪技术要求 |
China National Standards Instrument |
English PDF |
| GB/T 37929-2019 |
Non-destructive testing Instruments—Testing methods for life of X-ray tubes 无损检测仪器 X射线管寿命试验方法 |
China National Standards Instrument |
English PDF |
| GB/T 26693-2019 |
Timekeeping Instruments—Types，dimensions and nomenclature of watch movements 计时仪器 手表机心的形状、尺寸和名称 |
China National Standards Instrument |
English PDF |
| GB/T 21838.1-2019 |
Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 1:Test method 金属材料 硬度和材料参数的仪器化压入试验 第1部分：试验方法 |
China National Standards Instrument |
English PDF |
| GB/T 19748-2019 |
Metallic materials—Charpy V-notch pendulum impact test—Instrumented test method 金属材料 夏比V型缺口摆锤冲击试验 仪器化试验方法 |
China National Standards Instrument |
English PDF |
| GB/T 18809-2019 |
General specification for air ion measuring Instruments 空气离子测量仪通用规范 |
China National Standards Instrument |
English PDF |
| GB/T 37487-2019 |
Geotechnical engineering Instrument—Inclino meters 岩土工程仪器 测斜仪 |
China National Standards Instrument |
English PDF |
| GB/T 22135-2019 |
Commissioning of electrical,Instrumentation and control systems in the process industry—Specific phases and milestones 流程工业中电气、仪表和控制系统的试车 各特定的阶段和里程碑 |
China National Standards Instrument |
English PDF |
| GB/T 19704-2019 |
Display and record of hydrometrical Instruments 水文仪器显示与记录 |
China National Standards Instrument |
English PDF |
| GB/T 14318-2019 |
Radiation protection Instrumentation—Neutron ambient dose equivalent (rate) meters 辐射防护仪器 中子周围剂量当量（率）仪 |
China National Standards Instrument |
English PDF |
| GB/T 13336-2019 |
The series model of hydrometrical Instruments 水文仪器系列型谱 |
China National Standards Instrument |
English PDF |
| GB/T 11828.1-2019 |
Instruments for stage measurement—Part 1:Float-type stage gauge 水位测量仪器 第1部分：浮子式水位计 |
China National Standards Instrument |
English PDF |
| GB/T 37467-2019 |
Terminology for meteorological Instrument 气象仪器术语 |
China National Standards Instrument |
English PDF |
| GB/T 37367-2019 |
Geotechnical engineering Instrument—Displacement meters 岩土工程仪器 位移计 |
China National Standards Instrument |
English PDF |
| GB/T 20730.2-2019 |
Instruments with analogue inputs and two-or multi-state outputs for use in industrial-process control systems—Part 2:Guidance for inspection and routine testing 工业过程控制系统用模拟输入两位或多位输出仪表 第2部分:检查和例行试验导则 |
China National Standards Instrument |
English PDF |
| GB/T 37600.5-2019 |
National central product classification—Product category core metadata—Part 5:Musical Instrument 全国主要产品分类 产品类别核心元数据 第5部分：乐器 |
China National Standards Instrument |
English PDF |
| GB/T 37338-2019 |
Instrumentation for electric motorcycles and mopeds 电动摩托车和电动轻便摩托车用仪表 |
China National Standards Instrument |
English PDF |
| GB/T 32065.15-2019 |
Environmental test methods for oceanographic Instruments—Part 9:Mould test 海洋仪器环境试验方法 第15部分:水压试验 |
China National Standards Instrument |
English PDF |
| GB/T 32065.14-2019 |
Environmental test methods for oceanographic Instruments—Part 15：Hydrostatic pressure test 海洋仪器环境试验方法 第14部分:振动试验 |
China National Standards Instrument |
English PDF |
| GB/T 32065.9-2019 |
Environmental test methods for oceanographic Instruments—Part 14 : Vibration test 海洋仪器环境试验方法 第9部分:长霉试验 |
China National Standards Instrument |
English PDF |
| GB/T 36937-2018 |
Environmental consciousness design for laboratory Instruments and equipments 实验室仪器及设备环境意识设计 |
China National Standards Instrument |
English PDF |
| GB/T 37161-2018 |
Gears—Evaluation of Instruments for measurement of individual gears 齿轮-齿轮测量仪的评价 |
China National Standards Instrument |
English PDF |
| GB/T 22071.1-2018 |
Test guide for Instrument transformers—Part 1：Current transformers 互感器试验导则-第1部分：电流互感器 |
China National Standards Instrument |
English PDF |
| GB/T 20524-2018 |
Agriculture and forest microclimate measuring Instrument 农林小气候观测仪 |
China National Standards Instrument |
English PDF |
| GB/T 37084-2018 |
General requirement for photoelectric detection Instruments reliability 光电检测仪器可靠性通用要求 |
China National Standards Instrument |
English PDF |
| GB/T 13166-2018 |
Design margin and abuse tests for electronic measuring Instrument 电子测量仪器设计余量与模拟误用试验 |
China National Standards Instrument |
English PDF |
| GB/T 36414-2018 |
Process measurement and control device—Specification for evaluating Instruments fault tolerance performance 工业过程测量和控制 仪表容错性能技术规范 |
China National Standards Instrument |
English PDF |
| GB/T 36411-2018 |
Intelligent pressure Instrument－General technical requirements 智能压力仪表 通用技术条件 |
China National Standards Instrument |
English PDF |
| GB/T 36416.2-2018 |
Testing machine vocabulary—Part 2: Non-destructive testing Instruments 试验机词汇 第2部分：无损检测仪器 |
China National Standards Instrument |
English PDF |
| GB/T 36245-2018 |
Guide for reliability allocation of industrial process measurement and control Instrument 工业过程测量与控制仪表可靠性分配指南 |
China National Standards Instrument |
English PDF |
| GB/T 36377-2018 |
Coding for identification of measuring Instrument 计量器具识别编码 |
China National Standards Instrument |
English PDF |
| GB/T 7341.5-2018 |
Electroacoustics—Audiometric equipment—Part 5: Instruments for the measurement of aural acoustic impedance/admittance 电声学 测听设备 第5部分：耳声阻抗/导纳的测量仪器 |
China National Standards Instrument |
English PDF |
| GB/T 35964-2018 |
Securities and related financial Instruments－Classification of financial instruments(CFI code) 证券及相关金融工具 金融工具分类（CFI编码） |
China National Standards Instrument |
English PDF |
| GB/T 36053-2018 |
Evaluation of thickness, density and interface width of thin films by X-ray reflectometry—Instrumental requirements, alignment and positioning, data collection, data analysis and reporting X射线反射法测量薄膜的厚度、密度和界面宽度 仪器要求、准直和定位、数据采集、数据分析和报告 |
China National Standards Instrument |
English PDF |
| GB/T 35993-2018 |
Grain and oil machinery -Glutomatic Instruments 粮油机械 面筋测定仪 |
China National Standards Instrument |
English PDF |
| GB/T 1043.2-2018 |
Plastics—Determination of charpy impact properties—Part 2:Instrumented impact test 塑料 简支梁冲击性能的测定 第2部分：仪器化冲击试验 |
China National Standards Instrument |
English PDF |
| GB/T 36071-2018 |
Non-destructive testing Instruments—technical requirements of X-ray real-time imaging system 无损检测仪器 X射线实时成像系统检测仪技术要求 |
China National Standards Instrument |
English PDF |
| GB/T 6113.402-2018 |
Specification for radio disturbance and immunity measuring apparatus and methods—Part 4-2:Uncertainties, statistics and limit modelling—Measurement Instrumentation uncertainty 无线电骚扰和抗扰度测量设备和测量方法规范 第4-2部分: 不确定度、统计学和限值建模 测量设备和设施的不确定度 |
China National Standards Instrument |
English PDF |
| GB/T 36015-2018 |
Non-destructive testing Instruments—Performance and testintg rules of industrial digital X-ray imaging system 无损检测仪器 工业X射线数字成像装置性能和检测规则 |
China National Standards Instrument |
English PDF |
| GB/T 36017-2018 |
Non-destructive testing Instruments—X-ray fluorescence analysis tube 无损检测仪器 X射线荧光分析管 |
China National Standards Instrument |
English PDF |
| GB/T 20840.6-2017 |
Instrument transformers—Part 6:Additional general requirements for low-power instrument transformers 互感器 第6部分：低功率互感器的补充通用技术要求 |
China National Standards Instrument |
English PDF |
| GB/T 20840.9-2017 |
Instrument transformers—Part 9:Digital interface for instruments transformers 互感器 第9部分：互感器的数字接口 |
China National Standards Instrument |
English PDF |
| GB/T 7723-2017 |
Fixed location electronic weighing Instrument 固定式电子衡器 |
China National Standards Instrument |
English PDF |
| GB/T 34850-2017 |
Weighing Instruments for mining car in motion 动态（矿用）轻轨衡 |
China National Standards Instrument |
English PDF |
| GB/T 24149.2-2017 |
Plastics―Polypropylene(PP) compound for automobile―Part 2: Instrument panel 塑料 汽车用聚丙烯（PP）专用料 第2部分：仪表板 |
China National Standards Instrument |
English PDF |
| GB/T 34790-2017 |
Inspenction of grain and oils—Determination of water activity of grains—Instrumental method 粮油检验 粮食籽粒水分活度的测定 仪器法 |
China National Standards Instrument |
English PDF |
| GB/T 34807-2017 |
General technical specifications for inspection and test of geotechnical engineering Instruments & equipment 岩土工程仪器设备的检验测试通用技术规范 |
China National Standards Instrument |
English PDF |
| GB/T 34839-2017 |
Timekeeping Instruments—Designs and dimensions of crowns and sealed tubes 计时仪器 柄头和密封管的设计和尺寸 |
China National Standards Instrument |
English PDF |
| GB/T 34837-2017 |
Classification, terminology and numbering for parts and assemblies of the time measuring Instruments—Quartz wrist watch movements 计时仪器零部件分类、名称和编号 石英手表机心 |
China National Standards Instrument |
English PDF |
| GB/T 34838-2017 |
General technical specifications of equipment and installation for electronic musical Instruments teaching system 电鸣乐器教学系统配备及安装通用技术规范 |
China National Standards Instrument |
English PDF |
| GB/T 19705-2017 |
Signals and interfaces for hydrometry Instruments 水文仪器信号与接口 |
China National Standards Instrument |
English PDF |
| GB/T 15966-2017 |
Primary parameters and general technical conditions for hydrologic Instruments 水文仪器基本参数及通用技术条件 |
China National Standards Instrument |
English PDF |
| GB/T 34578-2017 |
Technical requirements for operation,maintenance and test of Instrumentation and actuating equipment in thermal power plant 火力发电厂热工仪表与执行装置运行维护与试验技术规程 |
China National Standards Instrument |
English PDF |
| GB/T 34634-2017 |
Geometrical product specifications (GPS)—Measurement of linear sizes (500 mm-10000 mm) of plain workpiece—Choice of measuring Instrument 产品几何技术规范(GPS) 光滑工件尺寸(500mm～10000mm)测量 计量器具选择 |
China National Standards Instrument |
English PDF |
| GB/T 7676.1-2017 |
Direct acting indicating analogue electrical measuring Instruments and their accessories—Part 1：Definitions and general requirements common to all parts 直接作用模拟指示电测量仪表及其附件 第1部分：定义和通用要求 |
China National Standards Instrument |
English PDF |
| GB/T 7676.3-2017 |
Direct acting indicating analogue electrical measuring Instruments and their accessories—Part 3：Special requirements for wattmeters and varmeters 直接作用模拟指示电测量仪表及其附件 第3部分：功率表和无功功率表的特殊要求 |
China National Standards Instrument |
English PDF |
| GB/T 7676.2-2017 |
Direct acting indicating analogue electrical measuring Instruments and their accessories—Part 2：Special requirements for ammeters and voltmeters 直接作用模拟指示电测量仪表及其附件 第2部分：电流表和电压表的特殊要求 |
China National Standards Instrument |
English PDF |
| GB/T 7676.6-2017 |
Direct acting indicating analogue electrical measuring Instruments and their accessories—Part 6：Special requirements for ohmmeters(impedance meters ) and conductance meters 直接作用模拟指示电测量仪表及其附件 第6部分：电阻表（阻抗表）和电导表的特殊要求 |
China National Standards Instrument |
English PDF |
| GB/T 7676.5-2017 |
Direct acting indicating analogue electrical measuring Instruments and their accessories—Part 5：Special requirements for phase meters, power factor meters and synchroscopes 直接作用模拟指示电测量仪表及其附件 第5部分：相位表、功率因数表和同步指示器的特殊要求 |
China National Standards Instrument |
English PDF |
| GB/T 7676.8-2017 |
Direct acting indicating analogue electrical measuring Instruments and their accessories—Part 8：Special requirements for accessories 直接作用模拟指示电测量仪表及其附件 第8部分：附件的特殊要求 |
China National Standards Instrument |
English PDF |
| GB/T 7676.9-2017 |
Direct acting indicating analogue electrical measuring Instruments and their accessories—Part 9：Recommended test methods 直接作用模拟指示电测量仪表及其附件 第9部分：推荐的试验方法 |
China National Standards Instrument |
English PDF |
| GB/T 7676.4-2017 |
Direct acting indicating analogue electrical measuring Instruments and their accessories—Part 4：Special requirements for frequency meters 直接作用模拟指示电测量仪表及其附件 第4部分：频率表的特殊要求 |
China National Standards Instrument |
English PDF |
| GB/T 7676.7-2017 |
Direct acting indicating analogue electrical measuring Instruments and their accessories—Part 7：Special requirements for multi-function instruments 直接作用模拟指示电测量仪表及其附件 第7部分：多功能仪表的特殊要求 |
China National Standards Instrument |
English PDF |
| GB/T 34049-2017 |
Intelligent flow Instruments—General technical requirements 智能流量仪表 通用技术条件 |
China National Standards Instrument |
English PDF |
| GB/T 34050-2017 |
Intelligent temperature measuring Instruments—General technical requirements 智能温度仪表 通用技术条件 |
China National Standards Instrument |
English PDF |
| GB/T 34138-2017 |
Radiation protection Instrumentation—Environmental, electromagnetic and mechanical performance requirements 辐射防护仪器 环境、电磁和机械性能要求 |
China National Standards Instrument |
English PDF |
| GB/T 34140-2017 |
Radiation protection Instrumentation—Highly sensitive hand-held instruments for neutron detection of radioactive material 辐射防护仪器 用于放射性物质中子探测的高灵敏手持式仪器 |
China National Standards Instrument |
English PDF |
| GB/T 34142-2017 |
Radiation protection Instrumentation—Highly sensitive hand-held instruments for photon detection of radioactive material 辐射防护仪器 用于放射性物质光子探测的高灵敏手持式仪器 |
China National Standards Instrument |
English PDF |
| GB/T 33886-2017 |
Non-destructive testing Instruments—Industrial electronic endoscopic detector 无损检测仪器 工业电子内窥镜检测仪 |
China National Standards Instrument |
English PDF |
| GB/T 33887-2017 |
Non-destructive testing Instruments—Industrial optical fiber endoscope detector 无损检测仪器 工业光纤内窥镜检测仪 |
China National Standards Instrument |
English PDF |
| GB/T 33889-2017 |
Nondestructive testing Instrument—Specification for eddy current-magnetic flux leakage integrated instrument 无损检测仪器 涡流-漏磁综合检测仪技术规则 |
China National Standards Instrument |
English PDF |
| GB/T 33888-2017 |
Non-destructive testing Instruments—Characterization and verification of ultrasonic thickness measuring equipment 无损检测仪器 超声测厚仪特性与验证 |
China National Standards Instrument |
English PDF |
| GB/T 33900-2017 |
Application attribute protocol for Instrument of industrial internet of things 工业物联网仪表应用属性协议 |
China National Standards Instrument |
English PDF |
| GB/T 33899-2017 |
Interoperating protocol for Instrument of industrial internet of things 工业物联网仪表互操作协议 |
China National Standards Instrument |
English PDF |
| GB/T 33904-2017 |
Service protocol for Instrument of industrial internet of things 工业物联网仪表服务协议 |
China National Standards Instrument |
English PDF |
| GB/T 33901-2017 |
Identifier protocol for Instrument of industrial internet of things 工业物联网仪表身份标识协议 |
China National Standards Instrument |
English PDF |
| GB/T 17626.7-2017 |
Electromagnetic compatibility—Testing and measurement techniques—General guide on harmonics and interharmonics measurements and Instrumentation, for power supply systems and equipment connected thereto 电磁兼容 试验和测量技术 供电系统及所连设备谐波、间谐波的测量和测量仪器导则 |
China National Standards Instrument |
English PDF |
| GB/T 33951-2017 |
Copper alloy rod and wire for precision telecommunications equipment and Instrument 精密仪器仪表和电讯器材用铜合金棒线 |
China National Standards Instrument |
English PDF |
| GB/T 33885-2017 |
Non-destructive testing Instruments—General requirements for sampling,routine inspection and type inspection 无损检测仪器 抽样、出厂检验、型式检验基本要求 |
China National Standards Instrument |
English PDF |
| GB/T 33726-2017 |
Musical Instrument’s Chinese generic name 乐器中文通用名称 |
China National Standards Instrument |
English PDF |
| GB/T 33722-2017 |
Chinese generic name of timbre and musical style of electrophones musical Instruments 电鸣乐器音色与音乐风格中文通用名称 |
China National Standards Instrument |
English PDF |
| GB/T 33723-2017 |
Grade requirements of subjective evaluator for the acoustic quality of musical Instrument 乐器声学品质主观评价人员等级规范 |
China National Standards Instrument |
English PDF |
| GB/T 33596-2017 |
Electrical installations in ships—Insulating and sheathing materials for shipboard and offshore units, power, control, Instrumentation and telecommunication cables 船舶电气装置 船用和海上设施用电力、控制、仪表和通信电缆绝缘和护套材料 |
China National Standards Instrument |
English PDF |
| GB/T 33523.701-2017 |
Geometrical product specifications (GPS)—Surface texture: Areal— Part 701: Calibration and measurement standards for contact (stylus) Instruments 产品几何技术规范(GPS) 表面结构 区域法 第701部分：接触（触针）式仪器的校准与测量标准 |
China National Standards Instrument |
English PDF |
| GB/T 33523.601-2017 |
Geometrical product specifications (GPS)—Surface texture: Areal—Part 601: Nominal characteristics of contact (stylus) Instruments 产品几何技术规范(GPS) 表面结构 区域法 第601部分：接触(触针)式仪器的标称特性 |
China National Standards Instrument |
English PDF |
| GB/T 22071.2-2017 |
Test guide for Instrument transformers—Part 2: Inductive voltage transformers 互感器试验导则 第2部分：电磁式电压互感器 |
China National Standards Instrument |
English PDF |
| GB/T 7721-2017 |
Continuous totalizing automatic weighing Instruments(belt weighers) 连续累计自动衡器（皮带秤） |
China National Standards Instrument |
English PDF |
| Find out:630Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 |
+86-755-25831330
