China National Standards

China di GB Standards English PDF List


GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards;  We provide Chinese GB standards and English version GB standards  Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services.
  •  China "di" GB Standards English PDF List:
    • Standard  Code Standard Title Standard Class Order
    GB/T 20200-2006 Sodium alpha-olefin sulfonate
    α-烯基磺酸钠    		 China National Standards
    di
    English PDF
    GB/T 20199-2006 Surface active agents - Technical alkane sulfonates - Determination of alkane monosulfonates content by direct two-phase titration
    表面活性剂-工业烷烃磺酸盐-烷烃单磺酸盐含量的测定（直接两相滴定法）    		 China National Standards
    di
    English PDF
    GB/T 20198-2006 Surface active agents - Detergents - Anionic-active matter hydrolyzable under alkaline conditions - Determination of hydrolyzable and non-hydrolyzable anionic-active matter
    表面活性剂和洗涤剂-在碱性条件下可水解的阴离子活性物-可水解和不可水解阴离子活性物的测定    		 China National Standards
    di
    English PDF
    GB/T 5836.2-2006 Unplasticized poly(vinyl chloride) (PVC-U) fittings for soil and waste inside buildings
    建筑排水用硬聚氯乙烯（PVC-U）管件    		 China National Standards
    di
    English PDF
    GB/T 5836.1-2006 Unplasticized poly (vinyl chloride) (PVC-U) pipes for soil and waste discharge inside buildings
    建筑排水用硬聚氯乙烯(PVC-U)管材    		 China National Standards
    di
    English PDF
    GB/T 20207.2-2006 Acrylonitrile-butadiene-styrene (ABS) pressure piping systems-Part 2: fittings
    丙烯腈-丁二烯-苯乙烯（ABS）压力管道系统 第2部分：管件    		 China National Standards
    di
    English PDF
    GB/T 20207.1-2006 Acrylonitrile-butadiene-styrene (ABS) pressure piping systems--Part 1: Pipes
    丙烯腈-丁二烯-苯乙烯（ABS）压力管道系统 第1部分：管材    		 China National Standards
    di
    English PDF
    GB/T 6113.402-2006 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
    无线电骚扰和抗扰度测量设备和测量方法规范 第4-2部分：不确定度、统计学和限值建模 测量设备和设施的不确定度    		 China National Standards
    di
    English PDF
    GB/T 20148-2006 Spatial distribution of daylight-CIE standard general sky
    日光的空间分布 CIE一般标准天空    		 China National Standards
    di
    English PDF
    GB/T 15152-2006 Methods of judging degradation for interference to mobile radiocommunication in the presence of impulsive noise
    脉冲噪声干扰引起移动通信性能降级的评定方法    		 China National Standards
    di
    English PDF
    GB/T 12190-2006 Method for measuring the shielding effectiveness of electromagnetic shielding enclosures
    电磁屏蔽室屏蔽效能的测量方法    		 China National Standards
    di
    English PDF
    GB/T 20140-2006 Dynamic characteristic and vibration measurement method of turbo-generators on stator windings and evaluation criteria
    透平型发电机定子绕组端部动态特性和振动试验方法及评定    		 China National Standards
    di
    English PDF
    GB/T 20139-2006 Electrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS
    电气绝缘结构-对已确定等级的散绕绕组绝缘结构进行组分调整的热评定方法    		 China National Standards
    di
    English PDF
    GB/T 5687.11-2006 Ferrochromium-Determination of titanium content-diantipyrylmethane spectrophotometric method
    铬铁 钛含量的测定 二安替比林甲烷分光光度法    		 China National Standards
    di
    English PDF
    GB/T 4241-2006 Stainless steel wire rods for welding
    焊接用不锈钢盘条    		 China National Standards
    di
    English PDF
    GB/T 20127.9-2006 Steel and alloy - Determination of trace element contents Part 9: Determination of scandium content by inductively coupled plasma atomic emission spectrometric method
    钢铁及合金 痕量元素的测定 第9部分：电感耦合等离子体发射光谱法测定钪含量    		 China National Standards
    di
    English PDF
    GB/T 20127.13-2006 Steel and alloy - Determination of trace element contents Part 13: Determination of tin content by iodide extraction-phenylfluorone photometric method
    钢铁及合金 痕量元素的测定 第13部分：碘化物萃取-苯基荧光酮光度法测定锡含量    		 China National Standards
    di
    English PDF
    GB/T 20127.11-2006 Steel and alloy - Determination of trace element contents Part 11: Determination of indium and thallium content by inductively coupled plasma-mass spectrometric method
    钢铁及合金 痕量元素的测定 第11部分：电感耦合等离子体质谱法测定铟和铊含量    		 China National Standards
    di
    English PDF
    GB/T 20130-2006 Self-shielding electron beam sterilizing facility
    自屏蔽电子束消毒灭菌装置    		 China National Standards
    di
    English PDF
    GB/T 10263-2006 Environmental conditions and test procedures for nuclear radiation detectors
    核辐射探测器环境条件与试验方法    		 China National Standards
    di
    English PDF
    GB 10621-2006 Food additive liquid carbon dioxide
    食品添加剂 液体二氧化碳    		 China National Standards
    di
    English PDF
    GB/T 9841-2006 Feed additive Vitamin B12 powder (cyanocobalamin cobione)
    饲料添加剂 维生素B12(氰钴胺)粉剂    		 China National Standards
    di
    English PDF
    GB/T 7303-2006 Feed additive vitamin C　（L－Ascorbic acid）
    饲料添加剂 维生素C(L-抗坏血酸)    		 China National Standards
    di
    English PDF
    GB/T 20195-2006 Animal feeding stuffs - Preparation of test samples
    动物饲料　试样的制备    		 China National Standards
    di
    English PDF
    GB/T 20194-2006 Animal feeding stuffs - Determination of starch content - Polarimetric method
    饲料中淀粉含量的测定　旋光法    		 China National Standards
    di
    English PDF
    GB/T 20117-2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Sample preparation for the determination of particle size distribution of ceramic powders
    精细陶瓷粉体颗粒尺寸分布测试用样品的制备    		 China National Standards
    di
    English PDF
    GB/T 10700-2006 Test methods for elastic moduli of fine ceramics (advanced ceramics, advanced technical ceramics) - Bending method
    精细陶瓷弹性模量试验方法 弯曲法    		 China National Standards
    di
    English PDF
    GB/T 20109-2006 Fresh air dehumidifiers
    全新风除湿机    		 China National Standards
    di
    English PDF
    GB/T 20108-2006 Low temperature unitary air conditioners
    低温单元式空调机    		 China National Standards
    di
    English PDF
    GB/T 10044-2006 Welding electrodes and rods for cast iron
    铸铁焊条及焊丝    		 China National Standards
    di
    English PDF
    GB/T 20106-2006 General principles of stipulating the assessment indicator frame of cleaner production for industries
    工业清洁生产评价指标体系编制通则    		 China National Standards
    di
    English PDF
    GB/T 17948.3-2006 Functional evaluation of insulation systems for rotating electrical machines - Test procedures for form-wound windings - Thermal evaluation and classification of insulation sysyems used in machines up to and including 50MVA and 15kV
    旋转电机绝缘结构功能性评定 成型绕组试验规程 50MVA、15kV及以下电机绝缘结构热评定和分级    		 China National Standards
    di
    English PDF
    GB/T 17948.2-2006 Functional evaluation of insulation systems for rotating electrical machines - Test procedures for wire-wound windings - Classification of changes and insulation component substitutions
    旋转电机绝缘结构功能性评定 散绕绕组试验规程 变更和绝缘组分替代的分级    		 China National Standards
    di
    English PDF
    GB/T 1409-2006 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including meter wavelengths
    测量电气绝缘材料在工频、音频、高频(包括米波波长在内)下电容率和介质损耗因数的推荐方法    		 China National Standards
    di
    English PDF
    GB/T 3871.5-2006 Agricultural tractors - Test procedures - Part 5: Turning and clearance diameters
    农业拖拉机　试验规程　第5部分：转向圆和通过圆直径    		 China National Standards
    di
    English PDF
    GB/T 3810.2-2006 Test methods of ceramic tiles Part 2: Determination of dimensions and surface quality
    陶瓷砖试验方法 第2部分:尺寸和表面质量的检验    		 China National Standards
    di
    English PDF
    GB/T 3810.16-2006 Test methods of ceramic tiles Part 16: Determination of small colour differences
    陶瓷砖试验方法 第16部分:小色差的测定    		 China National Standards
    di
    English PDF
    GB/T 20102-2006 Test method for determining tensile breaking strength of glass fiber reinforcing mesh, after exposure to a sodium hydroxide sulution
    玻璃纤维网布耐碱性试验方法 氢氧化钠溶液浸泡法    		 China National Standards
    di
    English PDF
    GB/T 8845-2006 Terminology of stamping dies
    冲模术语    		 China National Standards
    di
    English PDF
    GB/T 20064.2-2006 Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement
    往复式内燃机 手柄起动装置 第2部分：脱开角试验方法    		 China National Standards
    di
    English PDF
    GB/T 14662-2006 Specification of stamping dies
    冲模技术条件    		 China National Standards
    di
    English PDF
    GB/T 20063.9-2006 Graphical symbols for diagrams -Part 9: Pumps, compressors and fans
    简图用图形符号 第9部分：泵、压缩机与鼓风机    		 China National Standards
    di
    English PDF
    GB/T 20063.8-2006 Graphical symbols for diagrams -Part 8: Valves and dampers
    简图用图形符号 第8部分：阀与阻尼器    		 China National Standards
    di
    English PDF
    GB/T 20063.7-2006 Graphical symbols for diagrams -Part 7: Basic mechanical components
    简图用图形符号 第7部分：基本机械构件    		 China National Standards
    di
    English PDF
    GB/T 20063.6-2006 Graphical symbols for diagrams -Part 6: Measurement and control functions
    简图用图形符号 第6部分：测量与控制功能    		 China National Standards
    di
    English PDF
    GB/T 20063.5-2006 Graphical symbols for diagrams -Part 5: Measurement and control devices
    简图用图形符号 第5部分：测量与控制装置    		 China National Standards
    di
    English PDF
    GB/T 20063.4-2006 Graphical symbols for diagrams -Part 4: Actuators and related devices
    简图用图形符号 第4部分：调节器及其相关设备    		 China National Standards
    di
    English PDF
    GB/T 20063.3-2006 Graphical symbols for diagrams -Part 3: Connections and related devices
    简图用图形符号 第3部分：连接件与有关装置    		 China National Standards
    di
    English PDF
    GB/T 20063.2-2006 Graphical symbols for diagrams -Part 2: Symbols having general application
    简图用图形符号 第2部分：符号的一般应用    		 China National Standards
    di
    English PDF
    GB/T 20063.12-2006 Graphical symbols for diagrams -Part 12: Devices for separating purification and mixing
    简图用图形符号 第12部分：分离、净化和混合的装置    		 China National Standards
    di
    English PDF
    GB/T 20063.1-2006 Graphical symbols for diagrams -Part 1: General information and indexes
    简图用图形符号 第1部分：通用信息与索引    		 China National Standards
    di
    English PDF
    GB/T 20063.11-2006 Graphical symbols for diagrams -Part 11: Devices for heat transfer and heat engines
    简图用图形符号 第11部分：热交换器和热发动机器件    		 China National Standards
    di
    English PDF
    GB/T 20063.10-2006 Graphical symbols for diagrams -Part 10: Fluid power converters
    简图用图形符号 第10部分：流动功率转换器    		 China National Standards
    di
    English PDF
    GB/T 20100-2006 Stainless steel fiber sintering medium
    不锈钢纤维烧结滤毡    		 China National Standards
    di
    English PDF
    GB/T 20099-2006 Sample preparation - dispersing procedures for powders in liquids
    样品制备-粉末在液体中的分散方法    		 China National Standards
    di
    English PDF
    GB/T 20067-2006 Large diameter steel wire ropes
    粗直径钢丝绳    		 China National Standards
    di
    English PDF
    GB/T 15445.2-2006 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
    粒度分析结果的表述 第2部分：由粒度分布计算平均粒径/直径和各次矩    		 China National Standards
    di
    English PDF
    GB/T 15629.1103-2006 Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Specification
    信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第11部分：无线局域网媒体访问控制和物理层规范：附加管理域操作规范    		 China National Standards
    di
    English PDF
    GB 15629.1104-2006 Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Further Higher
    信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第11部分：无线局域网媒体访问控制和物理层规范：2.4GHz频段更高数据速率扩展规范    		 China National Standards
    di
    English PDF
    GB 15629.1101-2006 Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: High-Speed Phy
    信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第11部分：无线局域网媒体访问控制和物理层规范：5.8GHz频段高速物理层扩展规范    		 China National Standards
    di
    English PDF
    GB/T 5289.3-2006 Test conditions for boring and milling machines with horizontal spindle - Testing of the accuracy - Part 3: Floor type machines with detached, stationary work-holding table
    卧式铣镗床检验条件 精度检验 第3部分:带分离式工件夹持固定工作台的落地式机床    		 China National Standards
    di
    English PDF
    GB/T 3932.2-2006 Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Part 2: Machines with vertical spindle
    床身铣床检验条件 精度检验 第2部分:立式铣床    		 China National Standards
    di
    English PDF
    GB/T 3932.1-2006 Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Part 1: Machines with horizontal spindle
    床身铣床检验条件 精度检验 第1部分:卧式铣床    		 China National Standards
    di
    English PDF
    GB/T 20088-2006 Machinery for agriculture - Trailed units of shallow tillage equipment - Main dimensions and attachment points
    农业机械 浅耕机具的牵引装置 主要尺寸和连接点    		 China National Standards
    di
    English PDF
    GB/T 20087-2006 Equipment for working the soil - Rotary cultivator blades - Fixing dimensions
    土壤耕作机械 旋转式中耕机刀片 安装尺寸    		 China National Standards
    di
    English PDF
    GB/T 20084-2006 Equipment for crop protection - Sprayers - Connection threading
    植物保护机械 喷雾机 连接螺纹    		 China National Standards
    di
    English PDF
    GB/T 2546.1-2006 Plastics―Polypropylene(PP) moulding and extrusion materials―Part 1: Designation system and basis for specifications
    塑料 聚丙烯（PP〕模塑和挤出材料 第1部分：命名系统和分类基础    		 China National Standards
    di
    English PDF
    GB/T 20436-2006 dimethylsiloxane cyclics mixture
    二甲基硅氧烷混合环体    		 China National Standards
    di
    English PDF
    GB/T 20417.2-2006 Plastics―Acrylonitrile-butadiene-styrene(ABS)moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties
    塑料 丙烯腈-丁二烯-苯乙烯 (ABS) 模塑和挤出材料 第2部分:试样制备和性能测定    		 China National Standards
    di
    English PDF
    GB/T 1845.2-2006 Plastics―Polyethylene(PE) moulding and extrusion materials―Part 2: Preparation of test specimens and determination of properties
    塑料 聚乙烯 (PE) 模塑和挤出材料 第2部分: 试样制备和性能测定    		 China National Standards
    di
    English PDF
    GB/T 8655-2006 Styrene - butadiene rubber (SBR) 1500
    苯乙烯-丁二烯橡胶 (SBR) 1500    		 China National Standards
    di
    English PDF
    GB/T 8929-2006 Crude petroleum - Determination of water - distillation method
    原油水含量的测定 蒸馏法    		 China National Standards
    di
    English PDF
    GB 50371-2006 Code for sound reinforcement system design of auditorium
    厅堂扩声系统设计规范    		 China National Standards
    di
    English PDF
    GB/T 4607-2006 Road vehicles - 90 semi-trailer fifth wheel coupling pin - Basic and mounting/interchangeability dimensions
    道路车辆 半挂车牵引座90号牵引销的基本尺寸和安装、互换性尺寸    		 China National Standards
    di
    English PDF
    GB/T 4606-2006 Road vehicles - 50 semi-trailer fifth wheel coupling pin - Basic and mounting/interchangeability dimensions
    道路车辆 半挂车牵引座50号牵引销的基本尺寸和安装、互换性尺寸    		 China National Standards
    di
    English PDF
    GB/T 5801-2006 Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 - Boundary dimensions and tolerances
    滚动轴承 48、49和69尺寸系列滚针轴承 外形尺寸和公差    		 China National Standards
    di
    English PDF
    GB/T 273.2-2006 Rolling bearings - Thrust bearings - Boundary dimensions, general plan
    滚动轴承 推力轴承 外形尺寸总方案    		 China National Standards
    di
    English PDF
    GB/T 20058-2006 Rolling bearings ― Single-row angular contact ball bearings ― Chamfer dimensions for outer ring non-thrust side
    滚动轴承 单列角接触球轴承 外圈非推力端倒角尺寸    		 China National Standards
    di
    English PDF
    GB 20179-2006 Safety of woodworking machines - Circular saw benches (with or without travelling table) and dimension saw
    木工机床安全 手动进给圆锯机和带移动工作台锯板机    		 China National Standards
    di
    English PDF
    GB/T 20170.1-2006 Test methods for physical characters of rare earth metals and their compounds Determination for particle size distribution of rare earth compounds
    稀土金属及其化合物物理性能测试方法 稀土化合物粒度分布的测定    		 China National Standards
    di
    English PDF
    GB/T 20040-2005 Product of geographical indication -- Fangzheng rice
    地理标志产品 方正大米    		 China National Standards
    di
    English PDF
    GB/T 19960.1-2005 Wind turbine generator system Part 1: Technology condition
    风力发电机组 第1部分：通用技术条件    		 China National Standards
    di
    English PDF
    GB 50364-2005 Technical code for solar water heating system of civil buildings
    民用建筑太阳能热水系统应用技术规范    		 China National Standards
    di
    English PDF
    GB 20007-2005 Safety of woodworking machines -- Single spindle moulding machines
    木工机床安全 单轴铣床    		 China National Standards
    di
    English PDF
    GB 19999-2005 Safety of woodworking machines -- Four-side Moulding Machines and four-side planing machies
    木工机床安全 四面铣床和四面刨床    		 China National Standards
    di
    English PDF
    GB 19998-2005 Electrolytic machine tools -- Techincal requirements for safefuarding
    电解加工机床 安全防护技术要求    		 China National Standards
    di
    English PDF
    GB 50368-2005 Residential building code
    住宅建筑规范    		 China National Standards
    di
    English PDF
    GB 50365-2005 Code for operation and management of central air conditioning system
    空调通风系统运行管理规范    		 China National Standards
    di
    English PDF
    GB/T 50362-2005 Technical standard for performance assessment of residential buildings
    住宅性能评定技术标准    		 China National Standards
    di
    English PDF
    GB/T 14233.2-2005 Infusion,transfusion,injection equipment for medical use -- Part 2: Biological test methods
    医用输液、输血、注射器具检验方法 第2部分：生物学试验方法    		 China National Standards
    di
    English PDF
    GB/T 19961-2005 Product of designations of origin or geographical indication---Jiannanchun liquor
    地理标志产品 剑南春酒    		 China National Standards
    di
    English PDF
    GB/T 19959-2005 product of geographical indication-yangzhou lacquerware
    地理标志产品 扬州漆器    		 China National Standards
    di
    English PDF
    GB/T 19958-2005 Product of designations of origin or geographical indication━━Anshan Nanguo-pear
    地理标志产品 鞍山南果梨    		 China National Standards
    di
    English PDF
    GB/T 19957-2005 Product of designations of origin or geographical indication---Sozhou Yang-Chen Lake Da-Zha Crab
    地理标志产品 阳澄湖大闸蟹    		 China National Standards
    di
    English PDF
    GB/T 5530-2005 Animal and vegetable fats and oils-Determination of acid value and acidity
    动植物油脂 酸值和酸度测定    		 China National Standards
    di
    English PDF
    GB/T 19969-2005 Information technology -- 130 mm optical disk cartridges for information interchange -- Capacity : 2.6 Gbytes per cartridge
    信息技术 信息交换用130mm盒式光盘 容量：每盒2.6G字节    		 China National Standards
    di
    English PDF
    GB/T 7742.1-2005 Textiles-Bursting properties of fabrics-Part1:Hydraulic method for determination of bursting strength and bursting distension
    纺织品 织物胀破性能 第1部分:胀破强力和胀破扩张度的测定 液压法    		 China National Standards
    di
    English PDF
    GB/T 11045.14-2005 Textiles-Tests for colour fastness-Miscellaneous tests part14:Colour fastness to acid chlorination of wool:sodium dichloroisocyanurate
    纺织品 色牢度试验 其他实验第14部分:毛纺织品耐二氯异氰尿酸钠酸性氯化色牢度    		 China National Standards
    di
    English PDF
    GB/T 19974-2005 Sterilization of health care products -- General requirement for characterization of a sterilizing agent and the development ,validation and routine control of a sterilization process for medical devices
    医疗保健产品灭菌 灭菌因子的特性及医疗器械灭菌工艺的设定、确认和常规控制的通用要求    		 China National Standards
    di
    English PDF
    GB/T 19973.2-2005 Sterilization of medical devices -- Microbiological methods -- Part 2: Test of sterility performed in the validation of a sterilization process
    医用器材的灭菌 微生物学方法 第二部分：确认灭菌过程的无菌试验    		 China National Standards
    di
    English PDF

    Find out:13747Items   |  To Page of: First -Previous-Next -Last  | [107] [108] [109] [110] [111] [112] [113]

    　

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2025 All Rights Reserved

    		- Since 2001 -
     Focus on China Standards & Compliance Services

    www.gbstandards.org
    China National Standards