Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 22789.1-2008 |
Plastics - Unplasticized poly(vinyl chloride)sheets - Types, Dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm 硬质聚氯乙烯板材 分类、尺寸和性能 第1部分：厚度1mm以上板材 |
China National Standards Dimension |
 English PDF |
| GB/T 19148.4-2008 |
Types and Dimensions of lampholders - Part 4: Miscellaneous lampholders 灯座的型式和尺寸 第4部分：杂类灯座 |
China National Standards Dimension |
English PDF |
| GB/T 22636-2008 |
Door leaves - Dimensions, rectangularity and flatness - Test method 门扇 尺寸、直角度和平面度检测方法 |
China National Standards Dimension |
English PDF |
| GB/T 7025.2-2008 |
Lifts - Main specifications and the Dimensions arrangements for its cars, wells and machine rooms - Part 2: Lifts of class Ⅳ 电梯主参数及轿厢、井道、机房的型式与尺寸 第2部分：Ⅳ类电梯 |
China National Standards Dimension |
English PDF |
| GB/T 7025.1-2008 |
Lifts - Main specifications and the Dimensions, arrangements for its cars, wells and machine rooms - Part 1: Lifts of classesⅠ、Ⅱ、Ⅲ、Ⅵ 电梯主参数及轿厢、井道、机房的型式与尺寸 第1部分：Ⅰ、Ⅱ、Ⅲ、Ⅵ类电梯 |
China National Standards Dimension |
English PDF |
| GB/T 5359.3-2008 |
Term for motorcycles and mopeds - Part 3: Dimensions of vehicle with two and three wheels 摩托车和轻便摩托车术语 第3部分：两轮车和三轮车尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 22552-2008 |
Caravans - Masses and Dimensions - Vocabulary 旅居挂车 质量和尺寸 术语及其定义 |
China National Standards Dimension |
English PDF |
| GB/T 19290.3-2008 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2-1: Sectional specification - Interface co-ordination Dimensions for the 25 mm equipment practice - Detail specification - Dimensions for cabinets and r 发展中的电子设备构体机械结构模数序列 第2-1部分：分规范 25mm设备构体的接口协调尺寸 详细规范 机柜和机架的尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 17164-2008 |
Glossary of terms used in Dimensional measuring instruments - Product terms 几何量测量器具术语 产品术语 |
China National Standards Dimension |
English PDF |
| GB/T 17163-2008 |
Glossary of terms used in Dimensional measuring instruments - General terms 几何量测量器具术语 基本术语 |
China National Standards Dimension |
English PDF |
| GB/T 10920-2008 |
Types and Dimensions of screw thread gauge and plain limit gauge 螺纹量规和光滑极限量规 型式与尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 11977-2008 |
Functions and Dimensions series of bathrooms in housing 住宅卫生间功能及尺寸系列 |
China National Standards Dimension |
English PDF |
| GB/T 6135.4-2008 |
Parallel shank twist drills - Part 4: The types and Dimensions for extra long parallel shank twist drills 直柄麻花钻 第4部分：直柄超长麻花钻的型式和尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 6135.3-2008 |
Parallel shank twist drills - Part 3: The types and Dimensions for parallel shank long series twist drills 直柄麻花钻 第3部分：直柄长麻花钻的型式和尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 6135.2-2008 |
Parallel shank twist drills - Part 2: The types and Dimensions for parallel shank stub series twisl drills and parallel shank jobber series twist drills 直柄麻花钻 第2部分：直柄短麻花钻和直柄麻花钻的型式和尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 6135.1-2008 |
Parallel shank twist drills - Part 1: The types and Dimensions for small type twist drills with oversize parallel shank 直柄麻花钻 第1部分：粗直柄小麻花钻的型式和尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 1438.4-2008 |
Taper shank twist drills - Part 4: The types and Dimensions extra-long for Morse taper shank twist drills 锥柄麻花钻 第4部分：莫氏锥柄超长麻花钻的型式和尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 1438.3-2008 |
Taper shank twist drills - Part 3: The types and Dimensions for lengthened Morse taper shank twist drills 锥柄麻花钻 第3部分：莫氏锥柄加长麻花钻的型式和尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 1438.2-2008 |
Taper shank twist drills - Part 2: The types and Dimensions for long Morse taper shank twist drills 锥柄麻花钻 第2部分：莫氏锥柄长麻花钻的型式和尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 1438.1-2008 |
Taper shank twist drills - Part 1: The types and Dimensions for Morse taper shank twist drills 锥柄麻花钻 第1部分：莫氏锥柄麻花钻的型式和尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 22481-2008 |
Cereals, oilseeds and pulses - Measurement of unit pressure loss in one-Dimensional air flow through bulk grain 谷物、油料和豆类 单向气流穿过散粮的单位压力损失测定 |
China National Standards Dimension |
English PDF |
| GB/T 22436-2008 |
Series of mounting Dimensions for wheel hub of motorcycles and mopeds 摩托车和轻便摩托车轮毂安装尺寸系列 |
China National Standards Dimension |
English PDF |
| GB/T 3852-2008 |
Types and Dimensions for coupling bores and their connection 联轴器轴孔和联结型式与尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 3478.4-2008 |
Straight cylindrical involute splines - Metric module, side fit - Part 4: 45°pressure angle Dimensions tables 圆柱直齿渐开线花键 （米制模数 齿侧配合） 第4部分：45°压力角尺寸表 |
China National Standards Dimension |
English PDF |
| GB/T 3478.3-2008 |
Straight cylindrical involute splines - Metric module, side fit - Part 3: 37.5°pressure angle Dimensions tables 圆柱直齿渐开线花键（米制模数 齿侧配合） 第3部分：37.5°压力角尺寸表 |
China National Standards Dimension |
English PDF |
| GB/T 3478.2-2008 |
Straight cylindrical involute splines - Metric module, side fit - Part 2: 30°pressure angle Dimensions tables 圆柱直齿渐开线花键（米制模数 齿侧配合） 第2部分： 30°压力角尺寸表 |
China National Standards Dimension |
English PDF |
| GB/T 2315-2008 |
Nominal failing load series and coupling Dimensions for electric power fittings 电力金具 标称破坏载荷系列及连接型式尺寸 |
China National Standards Dimension |
English PDF |
| GB 1003-2008 |
Three phases plugs and socket-outlets for household and similar purposes - Types，basic parameters and Dimensions 家用和类似用途三相插头插座 型式、基本参数和尺寸 |
China National Standards Dimension |
English PDF |
| GB 1002-2008 |
Single phase plugs and socket-outlets for household and similar purposes - Types, basic parameters and Dimensions 家用和类似用途单相插头插座 型式、基本参数和尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 5104-2008 |
The basic types and Dimensions of hobs for involute splines 渐开线花键滚刀 基本型式和尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 18577.2-2008 |
Earth-moving machinery - Definitions of Dimensions and codes - Part 2: Equipment and attachments 土方机械 尺寸与符号的定义 第2部分：工作装置和附属装置 |
China National Standards Dimension |
English PDF |
| GB/T 18577.1-2008 |
Earth-moving machinery - Definitions of Dimensions and codes - Part 1: Base machine 土方机械 尺寸与符号的定义 第1部分：主机 |
China National Standards Dimension |
English PDF |
| GB/T 9126-2008 |
Dimensions of non-metallic flat gaskets for pipe flanges 管法兰用非金属平垫片 尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 4622.2-2008 |
Dimensions for spiral wound gaskets for pipe flanges 缠绕式垫片 管法兰用垫片尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 19066.1-2008 |
Dimensions for flexible graphite covered wave-serrated metal gaskets 柔性石墨金属波齿复合垫片 尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 10446-2008 |
Plain bearings - Ring type thrust washers - Dimensions and tolerances 滑动轴承 整圆止推垫圈 尺寸和公差 |
China National Standards Dimension |
English PDF |
| GB/T 22310-2008 |
Road vehicles - Brake linings - Effects of heat on Dimensions and form of disc brake pads-test procedure 道路车辆 制动衬片 盘式制动衬块受热膨胀量试验方法 |
China National Standards Dimension |
English PDF |
| GB/T 8806-2008 |
Plastics piping systems - Plastics components - Determination of Dimensions 塑料管道系统 塑料部件尺寸的测定 |
China National Standards Dimension |
English PDF |
| GB/T 14486-2008 |
Dimensional tolerances for moulded plastic parts 塑料模塑件尺寸公差 |
China National Standards Dimension |
English PDF |
| GB/T 5900.1-2008 |
Machine tools - Connecting Dimensions of spindle noses and workholding chucks - Part 1: Conical connection 机床 主轴端部与卡盘连接尺寸 第1部分：圆锥连接 |
China National Standards Dimension |
English PDF |
| GB/T 908-2008 |
Forged bars - Dimensions, shape, weight and tolerances 锻制钢棒尺寸、外形、重量及允许偏差 |
China National Standards Dimension |
English PDF |
| GB/T 702-2008 |
Hot-rolled steel bars - Dimensions，shape，weight and tolerances 热轧钢棒尺寸、外形、重量及允许偏差 |
China National Standards Dimension |
English PDF |
| GB/T 6726-2008 |
Cold forming sectional steel for vehicles - Dimensions, shape, weight and tolerances 汽车用冷弯型钢尺寸、外形、重量及允许偏差 |
China National Standards Dimension |
English PDF |
| GB/T 6723-2008 |
Cold forming sectional steel - Open sectional steel for general structure - Dimensions, shape, weight and permissible tolerances 通用冷弯开口型钢尺寸、外形、重量及允许偏差 |
China National Standards Dimension |
English PDF |
| GB/T 12003-2008 |
Unplasticized polyvinyl chloride(PVC-U) windows - Determination of Dimensions 未增塑聚氯乙烯（PVC-U）塑料窗 外形尺寸的测定 |
China National Standards Dimension |
English PDF |
| GB/T 4476.4-2008 |
Drawing for metal hull of ships - Part 4：Dimensioning 金属船体制图 第4部分：尺寸注法 |
China National Standards Dimension |
English PDF |
| GB/T 1413-2008 |
Series 1 freight containers - Classification, Dimensions and ratings 系列1集装箱 分类、尺寸和额定质量 |
China National Standards Dimension |
English PDF |
| GB/T 4048-2008 |
Timekeeping instruments - Wristwatches - Dimensions of bracelet-to-case fastening elements 计时仪器 手表壳与表带连接部位的尺寸系列 |
China National Standards Dimension |
English PDF |
| GB/T 13576.3-2008 |
Buttress threads with the flank angles of 3 and 30 degrees - Part 3: Basic Dimensions 锯齿形(3°、30°)螺纹 第3部分：基本尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 11698-2008 |
Metal valves for use in marine flanged pipe systems - Face-to-face and center-to-face Dimensions 船用法兰连接金属阀门的结构长度 |
China National Standards Dimension |
English PDF |
| GB/T 9951-2008 |
Information technology - Telecommunication and information exchange between systems - 34 pin DTE/DCE interface connector mateability Dimensions and contact number assignments 信息技术 系统间远程通信和信息交换 34插针DTE/DCE接口连接器的配合性尺寸和接触件编号分配 |
China National Standards Dimension |
English PDF |
| GB/T 12355-2008 |
Micrographics - Splices of microfilm with image - Dimensions and Operational Constraints 缩微摄影技术 有影像缩微胶片的连接 |
China National Standards Dimension |
English PDF |
| GB/T 5184-2008 |
Fork-lift trucks - Hook-on type fork arms and fork arm carriages - Mounting Dimensions 叉车 挂钩型货叉和货叉架 安装尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 3229-2008 |
Assembly tools for screws and nuts - Drive ends for hand and machine operated screwdriver bits and connecting parts - Dimensions, torque testing 螺栓螺母用装配工具 手动和机动螺刀头的传动端和连接部件的尺寸及扭矩试验 |
China National Standards Dimension |
English PDF |
| GB/T 1592.3-2008 |
Agricultural tractors - Rear- mounted power take-off types 1,2 and 3 - Part 3: Main PTO Dimensions and spline dimensions, location of PTO 农业拖拉机后置动力输出轴1、2和3型 第3部分：动力输出轴尺寸和花键尺寸、动力输出轴位置 |
China National Standards Dimension |
English PDF |
| GB/T 1592.2-2008 |
Agricultural tractors - Rear- mounted power take-off types 1,2 and 3 - Part 2: Narrow-track tractors, Dimensions for master shield and clearance zone 农业拖拉机后置动力输出轴 1、2和 3 型 第 2 部分：窄轮距拖拉机防护罩尺寸和空隙范围 |
China National Standards Dimension |
English PDF |
| GB/T 1592.1-2008 |
Agricultural tractors - Rear- mounted power take-off types 1,2 and 3 - Part 1: General specifications, safety requirements, Dimensions for master shield and clearance zone 农业拖拉机后置动力输出轴 1、2和 3 型 第 1 部分：通用要求、安全要求、防护罩尺寸和空隙范围 |
China National Standards Dimension |
English PDF |
| GB/T 22076-2008 |
Pneumatic fluid power - Cylindrical quick-action couplings - Plug connecting Dimensions, specifications, application guidelines and testing 气动圆柱形快换接头 插头连接尺寸、技术要求、应用指南和试验 |
China National Standards Dimension |
English PDF |
| GB/T 9966.8-2008 |
Test methods for natural facing stones - Part 8: Test method for structural performance of Dimension stone cladding systems by uniform static pressure difference 天然饰面石材试验方法 第8部分: 用均匀静态压差检测石材挂装系统结构强度试验方法 |
China National Standards Dimension |
English PDF |
| GB/T 8287.2-2008 |
Indoor and outdoor post insulators for systems with nominal voltage greater than 1000 V - Part 2: Dimensions and characteristics 标称电压高于1000V系统用户内和户外支柱绝缘子 第2部分：尺寸与特性 |
China National Standards Dimension |
English PDF |
| GB/T 13026-2008 |
Types and Dimensions of a.c. capacitance graded bushings 交流电容式套管型式与尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 22162-2008 |
Dimensions of panel areas and cut-outs for panel and rack-mounted industrial-process measurement and control instruments 盘装和架装工业过程测量和控制仪表的盘面和开孔尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 22161-2008 |
Intermittent sprockets for 35mm motion - Picture projectors - Dimensions 35mm电影放映机间歇输片齿轮 尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 2951.11-2008 |
Common test methods for insulating and sheathing materials of electric and optical cables - Part 11：Methods for general application - Measurement of thickness and overall Dimensions - Tests for determining the mechanical properties 电缆和光缆绝缘和护套材料通用试验方法 第11部分：通用试验方法 厚度和外形尺寸测量 机械性能试验 |
China National Standards Dimension |
English PDF |
| GB/T 8102-2008 |
Single rod air cylinders, bores from 8mm to 25mm - Mounting Dimensions 缸内径8mm～25mm的单杆气缸安装尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 22060-2008 |
Microscopes - Dimensions of tube slide and tube slot connections 显微镜 镜筒滑块和镜筒槽的连接尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 7269-2008 |
Arrangement,types and basic Dimensions of consoles for electronic equipments 电子设备控制台的布局、型式和基本尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 4078-2008 |
Dimension of sample planchets、vials and test tubes for radioactivity measurement 放射性测量用样品托盘、瓶子和试管的尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 4056-2008 |
Ball and socket coupling Dimensions of string insulator units 绝缘子串元件的球窝连接尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 6848-2008 |
Cinematography - Cores for motion-picture and magnetic film rolls - Dimensions 电影 电影胶片和涂磁胶片卷的片芯 尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 2979-2008 |
Size desination,Dimensions,inflation pressure and load capacity for agricultural tyres 农业轮胎规格、尺寸、气压与负荷 |
China National Standards Dimension |
English PDF |
| GB/T 13352-2008 |
Belt drives V－belts for the automotive - Industry and corresponding pulleys - Dimensions 带传动 汽车工业用V带及其带轮 尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 10821-2008 |
V-belt and V-ribbed belt for agricultural machines - Dimensions 农业机械用V带和多楔带尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 6110-2008 |
Carbide dies for drawing - Types and Dimensions 硬质合金拉制模 型式和尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 2977-2008 |
Size designation，Dimensions，inflation pressure and load capacity for truck tyres 载重汽车轮胎规格、尺寸、气压与负荷 |
China National Standards Dimension |
English PDF |
| GB/T 970.1-2008 |
Circular screwing dies - Part 1: The types and Dimensions for circular screwing dies and die stocks 圆板牙 第1部分：圆板牙和圆板牙架的型式和尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 4127.7-2008 |
Bonded abrasive products - Dimensions - Part 7: Grinding wheels for manually guided grinding 固结磨具 尺寸 第7部分：人工操纵磨削砂轮 |
China National Standards Dimension |
English PDF |
| GB/T 4127.6-2008 |
Bonded abrasive products - Dimensions - Part 6: Grinding wheels for tool and tool room grinding 固结磨具 尺寸 第6部分：工具磨和工具室用砂轮 |
China National Standards Dimension |
English PDF |
| GB/T 4127.5-2008 |
Bonded abrasive products - Dimensions - Part 5: Grinding wheels for surface grinding/face grinding 固结磨具 尺寸 第5部分：平面磨削用端面磨砂轮 |
China National Standards Dimension |
English PDF |
| GB/T 4127.4-2008 |
Bonded abrasive products - Dimensions - Part 4: Grinding wheels for suface grinding/peripheral grinding 固结磨具 尺寸 第4部分：平面磨削用周边磨砂轮 |
China National Standards Dimension |
English PDF |
| GB/T 4127.14-2008 |
Bonded abrasive products - Dimensions - Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder 固结磨具 尺寸 第14部分：角向砂轮机用去毛刺、荒磨和粗磨砂轮 |
China National Standards Dimension |
English PDF |
| GB/T 4127.13-2008 |
Bonded abrasive products - Dimensions - Part 13: Grinding wheels for deburring and fettling on a vertical grinder 固结磨具 尺寸 第13部分：立式砂轮机用去毛刺和荒磨砂轮 |
China National Standards Dimension |
English PDF |
| GB/T 4127.12-2008 |
Bonded abrasive products - Dimensions - Part 12: Grinding wheels for deburring and fettling on a straight grinder 固结磨具 尺寸 第12部分：直向砂轮机用去毛刺和荒磨砂轮 |
China National Standards Dimension |
English PDF |
| GB/T 4127.11-2008 |
Bonded abrasive products - Dimensions - Part 11：Hand finishing sticks 固结磨具 尺寸 第11部分：手持抛光磨石 |
China National Standards Dimension |
English PDF |
| GB/T 4127.10-2008 |
Bonded abrasive products - Dimensions - Part 10: Stones for honing and superfinishings 固结磨具 尺寸 第10部分：珩磨和超精磨磨石 |
China National Standards Dimension |
English PDF |
| GB/T 21954.2-2008 |
Metal cutting band saw blades - Part 2：Characteristics and Dimensions 金属切割带锯条 第2部分：特性和尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 21952-2008 |
Polycrystalline diamond inserts,tipped - Dimensions 镶聚晶金刚石刀片 尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 21951-2008 |
Cubic boron nitride inserts,tipped or solid - Dimensions 镶或整体立方氮化硼刀片 尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 21940-2008 |
Earth-moving machinery - Cutting edges used on tractor-dozers, graders and scrapers - Principal shapes and basic Dimensions 土方机械 推土机、平地机和铲运机用刀片 主要形状和基本尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 16770.1-2008 |
Solid hardmetal end mills with parallel shank - Part 1: Dimensions 整体硬质合金直柄立铣刀 第1部分：型式与尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 16456.3-2008 |
End mills with brazed helical hardmetal tips - Part 3: Dimensions of end mills with morse typer shank 硬质合金螺旋齿立铣刀 第3部分：莫氏锥柄立铣刀 型式和尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 16456.2-2008 |
End mills with brazed helical tips - Part 2: Dimensions of end mills with 7:24 taper shank 硬质合金螺旋齿立铣刀 第2部分：7:24 锥柄立铣刀 型式和尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 16456.1-2008 |
End mills with brazed helical hardmetal tips - Part l: Dimensions of end mills with parallel shank 硬质合金螺旋齿立铣刀 第1部分：直柄立铣刀 型式和尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 15306.3-2008 |
Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 3: Dimensions of inserts without fixing hole(Class U) 陶瓷可转位刀片 第3部分：无孔刀片尺寸（U级） |
China National Standards Dimension |
English PDF |
| GB/T 15306.2-2008 |
Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 2: Dimensions of inserts with cylindrical fixing hole 陶瓷可转位刀片 第2部分：带孔刀片尺寸 |
China National Standards Dimension |
English PDF |
| GB/T 15306.1-2008 |
Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 1: Dimensions of inserts without fixing hole(Class G) 陶瓷可转位刀片 第1部分：无孔刀片尺寸（G级） |
China National Standards Dimension |
English PDF |
| GB/T 21835-2008 |
Dimensions and masses per unit length of welded steel pipes 焊接钢管尺寸及单位长度重量 |
China National Standards Dimension |
English PDF |
| GB/T 17395-2008 |
Dimensions,shapes,masses,and tolerances of seamless steel tubes 无缝钢管尺寸、外形、重量及允许偏差 |
China National Standards Dimension |
English PDF |
| GB/Z 21738-2008 |
Fundamental structures of one Dimensional nanomaterials - High resolution electron microscopy characterization 一维纳米材料的基本结构 高分辨透射电子显微镜检测方法 |
China National Standards Dimension |
English PDF |
| GB/T 19148.5-2008 |
Types and Dimensions of lampholders - Part 5: Bayonet lampholders 灯座的型式和尺寸 第5部分: 卡口式灯座 |
China National Standards Dimension |
English PDF |
| Find out:924Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 10 |
+86-755-25831330
