Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 39560.12-2024 |
Determination of certain substances in electronic and electrical products-Part 12: SIMUltaneous determination of polybrominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry 电子电气产品中某些物质的测定-第12部分：气相色谱-质谱法同时测定聚合物中的多溴联苯、多溴二苯醚和邻苯二甲酸酯 |
China National Standards IMU |
 English PDF |
| GB/T 44126.2-2024 |
Road vehicles - Roller brake test bench test method for brake systems of vehicles with a maxIMUm allowable total mass of more than 3.5t - Part 2: Air-over-liquid and pure hydraulic brake systems 道路车辆-最大允许总质量3.5t以上车辆制动系统滚筒制动试验台台架试验方法-第2部分：气顶液和纯液压制动系统 |
China National Standards IMU |
English PDF |
| GB/T 18222.2-2024 |
Small craft - Determination of maxIMUm propulsion rating by maneuvering speed - Part 2: Craft with a hull length between 8m and 24m 小艇-用操纵速度确定最大推进额定功率-第2部分：艇体长度在8m～24m之间的艇 |
China National Standards IMU |
English PDF |
| GB/T 43917.4-2024 |
Welding fume capture and separation equipment-Part 4: Determination of minIMUm air volume of capture device 焊接烟尘捕集和分离设备-第4部分：捕集装置最小风量的测定 |
China National Standards IMU |
English PDF |
| GB/T 44000-2024 |
Space Environment - General Requirements for Ground SIMUlation Test Devices for Space Environment Effects on Materials 空间环境-材料空间环境效应地面模拟试验装置通用要求 |
China National Standards IMU |
English PDF |
| GB/T 17592-2024 |
Textiles-Determination of drying rate at maxIMUm water absorption of fabrics 纺织品-禁用偶氮染料的测定 |
China National Standards IMU |
English PDF |
| GB/T 43537-2023 |
Sound system equipment Headphones and personal music players MaxIMUm sound pressure level measurement method 声系统设备 耳机及个人音乐播放器 最大声压级测量方法 |
China National Standards IMU |
English PDF |
| GB/T 12552-2023 |
MaxIMUm safe depth for industrial diving 产业潜水最大安全深度 |
China National Standards IMU |
English PDF |
| GB/T 16886.23-2023 |
Biological evaluation of medical devices Part 23: StIMUlation test 医疗器械生物学评价 第23部分：刺激试验 |
China National Standards IMU |
English PDF |
| GB 31610.5-2023 |
National food safety standards Inspection of ParagonIMUs in animal aquatic products and their products 食品安全国家标准 动物性水产品及其制品中并殖吸虫的检验 |
China National Standards IMU |
English PDF |
| GB 31650-2019 |
National Food Safety Standards MaxIMUm Residue Limits of Veterinary Drugs in Food 食品安全国家标准 食品中兽药最大残留限量 |
China National Standards IMU |
English PDF |
| GB 2763-2019 |
National Food Safety Standards MaxIMUm Residue Limits of Pesticides in Food 食品安全国家标准 食品中农药最大残留限量 |
China National Standards IMU |
English PDF |
| GB/Z 21223.3-2023 |
Guidelines for statistical analysis of aging test data Part 3: MinIMUm number of specimens under different test conditions given test data 老化试验数据统计分析导则 第3部分：给定试验数据的不同试验条件下的最少试样数量 |
China National Standards IMU |
English PDF |
| GB/T 43080.3-2023 |
Ventilators Ventilator efficiency classes Part 3: Ventilators without maxIMUm drive speed 通风机 通风机效率等级 第3部分：不含驱动装置最高转速时的通风机 |
China National Standards IMU |
English PDF |
| GB/T 42992.1-2023 |
Chemicals SIMUlation tests to evaluate the biodegradability of chemical substances discharged from wastewater General principles 化学品 评价废水中排放化学物质的生物降解性的模拟试验 通则 |
China National Standards IMU |
English PDF |
| GB/T 42833-2023 |
MinIMUm Performance Specifications for Beidou Satellite-Based Augmentation System Single-frequency Augmentation Service Airborne Equipment 北斗星基增强系统单频增强服务机载设备最低性能规范 |
China National Standards IMU |
English PDF |
| GB/T 42854-2023 |
General technical specifications for civil aircraft customer training flight sIMUlators 民用飞机客户培训飞行模拟机通用技术规范 |
China National Standards IMU |
English PDF |
| GB/T 42846-2023 |
Space environment Ground sIMUlation method of space radiation effects of non-metallic materials 空间环境 非金属材料空间辐射效应地面模拟方法 |
China National Standards IMU |
English PDF |
| GB/T 20147.3-2023 |
Colorimetry Part 3: CIE TristIMUlus Values 色度学 第3部分：CIE三刺激值 |
China National Standards IMU |
English PDF |
| GB/T 42661-2023 |
Corrosion of metals and alloys Test method for stress corrosion susceptibility of steel bars in sIMUlated marine environment 金属和合金的腐蚀 模拟海洋环境中钢筋应力腐蚀敏感性试验方法 |
China National Standards IMU |
English PDF |
| GB/T 42599-2023 |
Wind power generation system electrical sIMUlation model verification 风能发电系统 电气仿真模型验证 |
China National Standards IMU |
English PDF |
| GB/T 36237-2023 |
Wind Power Generation System General Electric SIMUlation Model 风能发电系统 通用电气仿真模型 |
China National Standards IMU |
English PDF |
| GB/T 42383.5-2023 |
Intelligent Manufacturing Network Collaborative Design Part 5: Multidisciplinary Collaborative SIMUlation 智能制造 网络协同设计 第5部分：多学科协同仿真 |
China National Standards IMU |
English PDF |
| GB/T 2423.24-2022 |
Environmental testing - Part 2: Test methods - Test S: SIMUlation of solar radiation on the ground and guidelines for solar radiation tests and weathering tests 环境试验 第2部分：试验方法 试验S：模拟地面上的太阳辐射及太阳辐射试验和气候老化试验导则 |
China National Standards IMU |
English PDF |
| GB/T 41639-2022 |
Plastics Determination of disintegration rate of plastic materials under laboratory-scale sIMUlated composting conditions 塑料 在实验室规模模拟堆肥化条件下塑料材料崩解率的测定 |
China National Standards IMU |
English PDF |
| GB/T 41543-2022 |
Space environment General specification for space environment effect sIMUlation test of aerospace materials 空间环境 航天材料空间环境效应模拟试验通用规范 |
China National Standards IMU |
English PDF |
| GB/T 41398-2022 |
MinIMUm requirements for binocular barrel of microscope 显微镜 双目镜筒最低要求 |
China National Standards IMU |
English PDF |
| GB/T 41309-2022 |
Nanotechnology, Endotoxin in vitro testing of nanomaterials, LIMUlus reagent method 纳米技术 纳米材料的内毒素体外测试 鲎试剂法 |
China National Standards IMU |
English PDF |
| GB/T 23920-2022 |
Low-speed vehicles - MaxIMUm speed measurement method 低速汽车 最高车速测定方法 |
China National Standards IMU |
English PDF |
| GB/T 13786-2022 |
SIMUlated Daylight Illumination of Cotton Grading Room 棉花分级室的模拟昼光照明 |
China National Standards IMU |
English PDF |
| GB/T 30661.6-2022 |
Seats for wheelchairs - Part 6: SIMUlated use and determination of seat cushion performance changes 轮椅车座椅 第6部分：模拟使用和座垫性能变化的测定 |
China National Standards IMU |
English PDF |
| GB/T 6538-2022 |
Determination of apparent viscosity of engine oil - Cold start sIMUlator method 发动机油表观黏度的测定 冷启动模拟机法 |
China National Standards IMU |
English PDF |
| GB 9706.229-2021 |
Medical electrical equipment—Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy sIMUlators 医用电气设备 第2-29部分：放射治疗模拟机的基本安全和基本性能专用要求 |
China National Standards IMU |
English PDF |
| GB 9706.229-2021 |
Medical electrical equipment—Part 2-29:Particular requirements for the basic safety and essential performance of radiotherapy sIMUlators 医用电气设备 第2-29部分：放射治疗模拟机的基本安全和基本性能专用要求 |
China National Standards IMU |
English PDF |
| GB/T 12265-2021 |
Safety of machinery—MinIMUm gaps to avoid crushing of parts of the human body 机械安全 防止人体部位挤压的最小间距 |
China National Standards IMU |
English PDF |
| GB/T 40089-2021 |
Steel wire ropes for the petroleum and natural gas industries—MinIMUm requirements and terms of acceptance 石油和天然气工业用钢丝绳 最低要求和验收条件 |
China National Standards IMU |
English PDF |
| GB/T 39967-2021 |
5-axis sIMUltaneous machining center -- Accuracy of S-shaped test piece 五轴联动加工中心 S形试件精度检验 |
China National Standards IMU |
English PDF |
| GB/T 39953-2021 |
5-axis sIMUltaneous machining center—Testing of the accuracy for RTCP 五轴联动加工中心 RTCP精度检验 |
China National Standards IMU |
English PDF |
| GB/T 39926-2021 |
Hydraulic fluid power—Filter element test methods—Thermal conditioning and cold start-up sIMUlation 液压传动 滤芯试验方法 热工况和冷启动模拟 |
China National Standards IMU |
English PDF |
| GB/T 39819-2021 |
Conveyor belts—Determination of minIMUm transition distance on three idler rollers 输送带 三辊托辊最小过渡距离的确定 |
China National Standards IMU |
English PDF |
| GB/T 41073-2021 |
Surface chemical analysis -- Electron spectroscopies -- MinIMUm reporting requirements for peak fitting in X-ray photoelectron spectroscopy 表面化学分析 电子能谱 X射线光电子能谱峰拟合报告的基本要求 |
China National Standards IMU |
English PDF |
| GB/T 20076-2021 |
Measurement methods of maxIMUm torque and maximum net power of engines for motorcycles and mopeds 摩托车和轻便摩托车发动机最大扭矩和最大净功率测量方法 |
China National Standards IMU |
English PDF |
| GB 34914-2021 |
MinIMUm allowable value of water efficiency and water efficiency grades for water purifier 净水机水效限定值及水效等级 |
China National Standards IMU |
English PDF |
| GB/T 40616-2021 |
Technical requirements for sIMUlation test of control system functions of the rural photovoltaic power station cluster 村镇光伏发电站集群控制系统仿真测试技术要求 |
China National Standards IMU |
English PDF |
| GB/T 40605-2021 |
Guidelines for modeling and testing of HVDC project digital-analog hybrid sIMUlation 高压直流工程数模混合仿真建模及试验导则 |
China National Standards IMU |
English PDF |
| GB/T 40601-2021 |
Technical requirements for real time digital sIMUlation technology of power system 电力系统实时数字仿真技术要求 |
China National Standards IMU |
English PDF |
| GB/T 40580-2021 |
Technical guide for modeling HVDC transmission systems in electromechanical transient sIMUlations 高压直流输电系统机电暂态仿真建模技术导则 |
China National Standards IMU |
English PDF |
| GB/T 40742.4-2021 |
Geometrical product specifications (GPS)—Geometrical precision verification—Part 4：Evaluation of dimension and geometrical error，discriminant pattern of minIMUm zone 产品几何技术规范（GPS） 几何精度的检测与验证 第4部分：尺寸和几何误差评定、最小区域的判别模式 |
China National Standards IMU |
English PDF |
| GB/T 40742.3-2021 |
Geometrical product specifications (GPS)—Geometrical precision verification—Part 3:Functional gauges and fixtures—Verification when applying maxIMUm material requirements and minimum material requirements 产品几何技术规范（GPS） 几何精度的检测与验证 第3部分：功能量规与夹具 应用最大实体要求和最小实体要求时的检测与验证 |
China National Standards IMU |
English PDF |
| GB 12021.9-2021 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for electric fans 电风扇能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 40879-2021 |
MaxIMUm allowable values of energy efficiency and energy efficiency grades for data centers 数据中心能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 40876-2021 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for commercial induction cookers 商用电磁灶能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 21454-2021 |
MinIMUm allowable values of the energy efficiency and energy efficiency grades for multi-connected air-condition (heat pump) units 多联式空调（热泵）机组能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB/T 39206-2020 |
Code of practice for installation and commissioning of fixed azIMUth thruster 固定式全回转舵桨装置安装与调试规程 |
China National Standards IMU |
English PDF |
| GB/T 39208-2020 |
Code of practice for installation and commissioning of retractable azIMUth thruster 可伸缩式全回转舵桨装置安装与调试规程 |
China National Standards IMU |
English PDF |
| GB 24850-2020 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for flat panel televisions and set-top boxes 平板电视与机顶盒能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 39177-2020 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for electric pressure cookers 电压力锅能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB/T 24328.3-2020 |
Tissue paper and tissue products—Part 3: Determination of tensile strength, stretch at maxIMUm force and tensile energy absorption 卫生纸及其制品 第3部分: 抗张强度、最大力值时伸长率和抗张能量吸收的测定 |
China National Standards IMU |
English PDF |
| GB/T 38918-2020 |
Civil airplane landing gear structure design and sIMUlation 民用飞机起落架结构设计与仿真 |
China National Standards IMU |
English PDF |
| GB 24500-2020 |
MinIMUm allowable values of energy efficiency and energy efficiency grades of industrial boilers 工业锅炉能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 20052-2020 |
MinIMUm allowable values of energy efficiency and the energy efficiency grades for power transformers 电力变压器能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 19761-2020 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for fan 通风机能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 18613-2020 |
MinIMUm allowable values of energy efficiency and values of efficiency grades for motors 电动机能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB/T 5137.3-2020 |
Test methods of safety glazing materials used on road vehicles—Part 3:Radiation,high temperature,humidity,fire and sIMUlated weathering resistance tests 汽车安全玻璃试验方法 第3部分：耐辐照、高温、潮湿、燃烧和耐模拟气候试验 |
China National Standards IMU |
English PDF |
| GB/T 8243.14-2020 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 14:Cold start sIMUlation and hydraulic pulse durability for composite filter housings 内燃机全流式机油滤清器试验方法 第14部分：复合材料滤清器的冷起动模拟和液压脉冲耐久试验 |
China National Standards IMU |
English PDF |
| GB/T 38554-2020 |
General requirements for sIMUlation service used in cloud manufacturing 云制造仿真服务通用要求 |
China National Standards IMU |
English PDF |
| GB/T 24635.4-2020 |
Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 4: Evaluating task-specific measurement uncertainty using sIMUlation 产品几何技术规范（GPS） 坐标测量机（CMM） 确定测量不确定度的技术 第4部分：应用仿真技术评估特定任务的测量不确定度 |
China National Standards IMU |
English PDF |
| GB/T 39413-2020 |
Performance requirements and test methods for BeiDou navigation satellite system signal sIMUlator 北斗卫星导航系统信号模拟器性能要求及测试方法 |
China National Standards IMU |
English PDF |
| GB/T 39334.5-2020 |
Digital sIMUlation of mechanical products manufacturing process—Part 5: Requirements of typical process simulation 机械产品制造过程数字化仿真 第5部分：典型工艺仿真要求 |
China National Standards IMU |
English PDF |
| GB/T 39334.4-2020 |
Digital sIMUlation of mechanical products manufacturing process—Part 4: Requirements of NC machining process simulation 机械产品制造过程数字化仿真 第4部分：数控加工过程仿真要求 |
China National Standards IMU |
English PDF |
| GB/T 39334.3-2020 |
Digital sIMUlation of mechanical products manufacturing process—Part 3: Requirements of assembly workshop logistics simulation 机械产品制造过程数字化仿真 第3部分：装配车间物流仿真要求 |
China National Standards IMU |
English PDF |
| GB/T 39334.2-2020 |
Digital sIMUlation of mechanical products manufacturing process—Part 2: Requirements of production line planning and layout simulation 机械产品制造过程数字化仿真 第2部分：生产线规划和布局仿真要求 |
China National Standards IMU |
English PDF |
| GB/T 39334.1-2020 |
Digital sIMUlation of mechanical products manufacturing process—Part 1: General requirements 机械产品制造过程数字化仿真 第1部分：通用要求 |
China National Standards IMU |
English PDF |
| GB 21455-2019 |
MinIMUm allowable values of the energy efficiency and energy efficiency grades for room air conditioners 房间空气调节器能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 2763-2019 |
National food safety standard - MaxIMUm residue limits for pesticides in food 食品安全国家标准 食品中农药最大残留限量 |
China National Standards IMU |
English PDF |
| GB 38450-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades of LED flat panel luminaires 普通照明用LED平板灯能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 38449-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grade of regenerative rolling reheating furnace 蓄热式轧钢加热炉能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 38448-2019 |
MinIMUm allowable values and grades of the energy efficiency and water efficiency for smart water closets 智能坐便器能效水效限定值及等级 |
China National Standards IMU |
English PDF |
| GB 30717-2019 |
MinIMUm allowable values of water efficiency and water efficiency grades for squatting pans 蹲便器水效限定值及水效等级 |
China National Standards IMU |
English PDF |
| GB 28736-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for welding machines 电焊机能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 28378-2019 |
MinIMUm allowable values of water efficiency and water efficiency grades for showers 淋浴器水效限定值及水效等级 |
China National Standards IMU |
English PDF |
| GB 28377-2019 |
MinIMUm allowable values of water efficiency and water efficiency grades for urinals 小便器水效限定值及水效等级 |
China National Standards IMU |
English PDF |
| GB 25501-2019 |
MinIMUm allowable values of water efficiency and water efficiency grades for faucets 水嘴水效限定值及水效等级 |
China National Standards IMU |
English PDF |
| GB 38383-2019 |
The minIMUm allowable values of the energy，water consumption and grades for dishwashers 洗碗机能效水效限定值及等级 |
China National Standards IMU |
English PDF |
| GB 26920.3-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for commercial refrigerating appliances—Part 3: Refrigerated beverage vending machines 商用制冷器具能效限定值和能效等级 第3部分：制冷自动售货机 |
China National Standards IMU |
English PDF |
| GB/T 37977.32-2019 |
Electrostatics—Part 3-2:Methods for sIMUlation of electrostatic effects—Machine model(MM)electrostatic discharge test waveform 静电学 第3-2部分:静电效应的模拟方法 机器模型(MM)的静电放电试验波形 |
China National Standards IMU |
English PDF |
| GB/T 37825-2019 |
Test method for sIMUlating wind pressure resistance of building glass under the uniform static loads 建筑玻璃均布静载模拟风压试验方法 |
China National Standards IMU |
English PDF |
| GB 19153-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for displacement air compressors 容积式空气压缩机能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 37485-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for submersible mixers of wastewater 污水处理用潜水推流式搅拌机能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 37484-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for precipitator 除尘器能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 37483-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for rotary aerator in wastewater treatment 污水处理用旋转曝气机能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 37480-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for low ambient temperature air source heat pumps（water chiller） packages 低环境温度空气源热泵（冷水）机组能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 37479-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for ducted air conditioners 风管送风式空调机组能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 37478-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades of LED luminaires for road and tunnel lighting 道路和隧道照明用LED灯具能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 30255-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades of LED products for indoor lighting 室内照明用LED产品能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB 19576-2019 |
MinIMUm allowable values of energy efficiency and energy efficiency grades for unitary air conditioners 单元式空气调节机能效限定值及能效等级 |
China National Standards IMU |
English PDF |
| GB/T 37586-2019 |
Technical regulation for sIMUlation on heat treatment process of heavy steel forgings 大型锻钢件热处理工艺模拟技术规范 |
China National Standards IMU |
English PDF |
| GB/T 37477-2019 |
SIMUlation test methods of surface support,launch and recovery for rescue system 救援装备水面搭载与吊放仿真试验方法 |
China National Standards IMU |
English PDF |
| GB/T 37322-2019 |
Test method for evaluating gasoline cleanliness—SIMUlation test of intake valve deposit (IVD) of gasoline engine 汽油清净性评价 汽油机进气阀沉积物模拟试验法 |
China National Standards IMU |
English PDF |
| GB/T 37320-2019 |
Ships and marine technology—Marine magnetic compasses, binnacles and azIMUth reading devices 船舶和海上技术 船用磁罗经、罗经柜和方位读数仪 |
China National Standards IMU |
English PDF |
| Find out:391Items | To Page of: First -Previous-Next -Last | 1 2 3 4 |
+86-755-25831330
