GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 11020-2005 |
Flammability of solid non-Metallic meterials when exposed to flame sources-List of test methods 固体非金属材料暴露在火焰源时的燃烧性试验方法清单 |
China National Standards Metal |
English PDF |
GB/T 19866-2005 |
Specification and qualification of welding procedures for Metallic materials-General rules 焊接工艺规程及评定的一般原则 |
China National Standards Metal |
English PDF |
GB/T 19856.2-2005 |
Lightning protection-Telecommunication lines-Part 2:Lines using Metallic conductors 雷电防护 通信线路 第2部分:金属导线 |
China National Standards Metal |
English PDF |
GB/T 3323-2005 |
Radiographic examination of fusion welded joints in Metallic materials 金属熔化焊焊接接头射线照相 |
China National Standards Metal |
English PDF |
GB/T 14992-2005 |
Classification and designation for superalloys and high temperature interMetallic materials 高温合金和金属间化合物高温材料的分类和牌号 |
China National Standards Metal |
English PDF |
GB/T 12603-2005 |
Classifications and designations for Metal heat treatment 金属热处理工艺分类及代号 |
China National Standards Metal |
English PDF |
GB/T 11354-2005 |
Determination of nitrided case depth and Metallographic microstructure examination for steel iron parts 钢铁零件 渗氮层深度测定和金相组织检验 |
China National Standards Metal |
English PDF |
GB/T 6463-2005 |
Metallic and other inorganic coatings-Review of methods of measurement of thickness 金属和其它无机覆盖层厚度测量方法评述 |
China National Standards Metal |
English PDF |
GB/T 6462-2005 |
Metallic and oxide coatings-Measurement of coating thinckness-Microscopical method 金属和氧化物覆盖层 厚度测量 显微镜法 |
China National Standards Metal |
English PDF |
GB/T 5270-2005 |
Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion 金属基体上的金属覆盖层 电沉积和化学沉积层 附着强度试验方法评述 |
China National Standards Metal |
English PDF |
GB/T 12600-2005 |
Metallic coatings Electroplated coatings of nickel plus chromium on plastics materials 金属覆盖层 塑料上镍+铬电镀层 |
China National Standards Metal |
English PDF |
GB/T 11378-2005 |
Metallic coatings-Measurement of coating thickness-Profilometric method 金属覆盖层 覆盖层厚度测量 轮廓仪法 |
China National Standards Metal |
English PDF |
GB/T 19816.4-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for Metallic blast-cleaning abrasives-Part 4:Determination of apparent density 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定 |
China National Standards Metal |
English PDF |
GB/T 19816.3-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for Metallic blast-cleaning abrasives-Part 3:Determination of hardness 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定 |
China National Standards Metal |
English PDF |
GB/T 19816.2-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for Metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定 |
China National Standards Metal |
English PDF |
GB/T 19816.1-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for Metallic blast-cleaning abrasives-Part 1:Sampling 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样 |
China National Standards Metal |
English PDF |
GB/T 19780-2005 |
Capacity calibration of spherical Metal tank-Total station external measuring method 球形金属罐的容积标定 全站仪外测法 |
China National Standards Metal |
English PDF |
GB/T 19775-2005 |
Glass-Metal sealed heat-pipe evacuated solar collector tubes 玻璃--金属封接式热管真空太阳集热管 |
China National Standards Metal |
English PDF |
GB/T 9217.9-2005 |
HardMetal burrs--Part 9:60°and 90°cone burrs(styles J and K) 硬质合金旋转锉 第9部分:60°和90°圆锥形旋转锉(J型和K型) |
China National Standards Metal |
English PDF |
GB/T 9217.8-2005 |
HardMetal burrs--Part 8:Flame burrs(style H) 硬质合金旋转锉 第8部分:火炬形旋转锉(H型) |
China National Standards Metal |
English PDF |
GB/T 9217.7-2005 |
HardMetal burrs--Part 7:Arch pointed-nose burrs(style G) 硬质合金旋转锉 第7部分:弧形尖头旋转锉(G型) |
China National Standards Metal |
English PDF |
GB/T 9217.6-2005 |
HardMetal burrs--Part 6:Arch round-(ball-)nose burrs(style F) 硬质合金旋转锉 第6部分:弧形圆头旋转锉(F型) |
China National Standards Metal |
English PDF |
GB/T 9217.5-2005 |
HardMetal burrs--Part 5:Oval burrs(style E) 硬质合金旋转锉 第5部分:椭圆形旋转锉(E型) |
China National Standards Metal |
English PDF |
GB/T 9217.4-2005 |
HardMetal burrs--Part 4:Spherical burrs(style D) 硬质合金旋转锉 第4部分:圆球形旋转锉(D型) |
China National Standards Metal |
English PDF |
GB/T 9217.3-2005 |
HardMetal burrs--Part 3:Cylindrical round-(ball-)nose burrs(style C) 硬质合金旋转锉 第3部分:圆柱形球头旋转锉(C型) |
China National Standards Metal |
English PDF |
GB/T 9217.2-2005 |
HardMetal burrs--Part 2:Cylindrical burrs(style A) 硬质合金旋转锉 第2部分:圆柱形旋转锉(A型) |
China National Standards Metal |
English PDF |
GB/T 9217.12-2005 |
HardMetal burrs--Part 12:Inverted cone burrs(style N) 硬质合金旋转锉 第12部分:倒锥形旋转锉(N型) |
China National Standards Metal |
English PDF |
GB/T 9217.1-2005 |
HardMetal burrs--Part 1:General specifications 硬质合金旋转锉 第1部分:通用技术条件 |
China National Standards Metal |
English PDF |
GB/T 9217.11-2005 |
HardMetal burrs--Part 11:Conical pointed-nose burrs(style M) 硬质合金旋转锉 第11部分:锥形尖头旋转锉(M型) |
China National Standards Metal |
English PDF |
GB/T 9217.10-2005 |
HardMetal burrs--Part 10:Conical round-(ball-)nose burrs(style L) 硬质合金旋转锉 第10部分:锥形圆头旋转锉(L型) |
China National Standards Metal |
English PDF |
GB/T 7314-2005 |
Metallic materials-Compression testing at ambient temperature 金属材料 室温压缩试验方法 |
China National Standards Metal |
English PDF |
GB/T 5776-2005 |
Corrosion of Metals and alloys-Guidelines for exposing and evaluating metals and alloys in surface sea water 金属和合金的腐蚀 金属和合金 在表层海水中暴露和评定的导则 |
China National Standards Metal |
English PDF |
GB/T 19747-2005 |
Corrosion of Metals and alloys-Determination of bimetallic Corrosion in outdoor exposure corrosion tests 金属和合金的腐蚀 双金属室外暴露腐蚀试验 |
China National Standards Metal |
English PDF |
GB/T 19746-2005 |
Corrosion of Metals and alloys-Alternate immersion test in salt solution 金属和合金的腐蚀 盐溶液周浸试验 |
China National Standards Metal |
English PDF |
GB/T 19743-2005 |
Water atomized pure iron powder and alloyed steel powder for powder Metallurgy 粉末冶金用水雾化纯铁粉、合金钢粉 |
China National Standards Metal |
English PDF |
GB/T 15970.8-2005 |
Corrosion of Metals and alloys-Stress corrosion test Part8:Preparation and use of specimens to evaluate weldments 金属和合金的腐蚀 应力腐蚀试验 第8部分:焊接试样的制备和应用 |
China National Standards Metal |
English PDF |
GB/T 10561-2005 |
Steel-Determination of content of nonMetallic inclusions-Micrographic method using standards diagrams 钢中非金属夹杂物含量的测定--标准评级图显微检验法 |
China National Standards Metal |
English PDF |
GB/T 19675.2-2005 |
Specifications of flexible graphite gaskets reinforced with tanged Metal sheet for pipe flanges 管法兰用金属冲齿板柔性石墨复合垫片 技术条件 |
China National Standards Metal |
English PDF |
GB/T 19675.1-2005 |
Dimensions of flexible graphite gaskets reinforced with tanged Metal sheet for ripe flanges 管法兰用金属冲齿板柔性石墨复合垫片 尺寸 |
China National Standards Metal |
English PDF |
GB/T 19674.3-2005 |
Connections for general use and fluid power-Ports and stud ends with thread-Stud ends with Metal-to-metal sealing(type B) 液压管接头用螺纹油口和柱端 金属对金属密封柱端(B型) |
China National Standards Metal |
English PDF |
GB/T 12221-2005 |
Metal valves-Face to face,end to end,center to face and center to end dimensions 金属阀门 结构长度 |
China National Standards Metal |
English PDF |
GB 15760-2004 |
Metal-cutting machine tools--General safeguarding specification 金属切削机床 安全防护通用技术条件 |
China National Standards Metal |
English PDF |
GB/T 9056-2004 |
Metal ruler 金属直尺 |
China National Standards Metal |
English PDF |
GB/T 19445-2004 |
Products of precious Metalsand their alloys--Packing,marking,transporting and storing 贵金属及其合金产品的包装、标志、运输、贮存 |
China National Standards Metal |
English PDF |
GB/T 2976-2004 |
Metallic materials--Wire--Wrapping test 金属材料 线材 缠绕试验方法 |
China National Standards Metal |
English PDF |
GB 19434.5-2004 |
Safety code for the inspection of Metal IBCs for dangerous goods--Performance tests 危险货物金属中型散装容器检验安全规范 性能检验 |
China National Standards Metal |
English PDF |
GB/T 12690.9-2003 |
Chemical analysis methods for non-rare earth impurities of rare earth Metals andtheir oxides--Determination of chlorine content--Silver nitrate turbidimetric method 稀土金属及其氧化物中非稀土杂质化学分析方法 氯量的测定 硝酸银比浊法 |
China National Standards Metal |
English PDF |
GB/T 12690.8-2003 |
Chemical analysis methods for non-rare earth impurities of rare earth Metals and their oxides--Determination of sodium content--Flame atomic absorption spectrometric method 稀土金属及其氧化物中非稀土杂质化学分析方法 钠量的测定 火焰原子吸收光谱法 |
China National Standards Metal |
English PDF |
GB/T 12690.7-2003 |
Chemical analysis methods for non-rare earth impurities of rare earth Metals and their oxides--Determination of silicon content--Molybdenum blue spectrophotometric method 稀土金属及其氧化物中非稀土杂质化学分析方法 硅量的测定 钼蓝分光光度法 |
China National Standards Metal |
English PDF |
GB/T 12690.6-2003 |
Chemical analysis methods for non-rare earth impurities of rare earth Metals and their oxides--Determination of iron content--Kalium thiocyanate,1,10-phenanthroline spectrophotometric method 稀土金属及其氧化物中非稀土杂质化学分析方法 铁量的测定 硫氰酸钾、1,10-二氮杂菲分光光度法 |
China National Standards Metal |
English PDF |
GB/T 12690.5-2003 |
Chemical analysis methods for non-rare earth impurities of rare earth Metals and their oxides--Determination of Al、Cr、Mn、Fe、Co、Ni、Cu、Zn、Pb content by inductively coupled plasma atomic emission spectrographic method--Determination of Co、M 稀土金属及其氧化物中非稀土杂质化学分析方法 铝、铬、锰、铁、钴、镍、铜、锌、铅的测定 电感耦合等离子体发射光谱法(方法1) 钴、锰、铅、镍、铜、锌、铝、铬的测定 电感耦合等离子 |
China National Standards Metal |
English PDF |
GB/T 12690.4-2003 |
Chemical analysis methods for non-rare earth impurities ofrare earth Metals and their oxides--Determination of oxygen and nitrogen content--Impulse-infrared and impulse-thermal conductance absorption method 稀土金属及其氧化物中非稀土杂质化学分析方法 氧、氮量的测定 脉冲-红外吸收法和脉冲-热导法 |
China National Standards Metal |
English PDF |
GB/T 12690.13-2003 |
Chemical analysis methods for non-rareearth impurities of rare earth Metals and their oxides--Determination of molybdenum and tungsten content--Induct-ively coupled plasma atomic emission spectrographic method and inductively coupled plasma mass spectrum 稀土金属及其氧化物中非稀土杂质化学分析方法 钼、钨量的测定 电感耦合等离子体发射光谱法和电感耦合等离子体质谱法 |
China National Standards Metal |
English PDF |
GB/T 12690.12-2003 |
Chemical analysis methods for non-rare earth impurities of rare earth Metals and their oxides--Determination of thorium content--Arsenazo III spectrophotometric method and inductively coupled plasma mass spectrum method 稀土金属及其氧化物中非稀土杂质化学分析方法 钍量的测定 偶氮胂III分光光度法和电感耦合等离子体质谱法 |
China National Standards Metal |
English PDF |
GB/T 12690.11-2003 |
Chemical analysis methods for non-rare earth impurities of rare earth Metals and their oxides--Determination of magnesium content--Flame atomic absorptionspectrometric method 稀土金属及其氧化物中非稀土杂质化学分析方法 镁量的测定 火焰原子吸收光谱法 |
China National Standards Metal |
English PDF |
GB/T 12690.10-2003 |
Chemical analysis methods for non-rare earth impurities of rare earth Metals and their oxides--Determination of phosphorus content by molybdenum blue spectrophotometric method 稀土金属及其氧化物中非稀土杂质化学分析方法 磷量的测定 钼蓝分光光度法 |
China National Standards Metal |
English PDF |
GB/T 9128-2003 |
Dimensions of Metallic ring-joint gaskets for use with steel pipe flanges 钢制管法兰用金属环垫 尺寸 |
China National Standards Metal |
English PDF |
GB/T 5330-2003 |
Industrial woven Metal wire cloth (square opening series) 工业用金属丝编织方孔筛网 |
China National Standards Metal |
English PDF |
GB/T 6524-2003 |
Metallic powders--Determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement 金属粉末 粒度分布的测量 重力沉降光透法 |
China National Standards Metal |
English PDF |
GB/T 15019-2003 |
Designation and classification of rapidly quenched Metals 快淬金属分类和牌号 |
China National Standards Metal |
English PDF |
GB/T 9792-2003 |
Conversion coatings on Metallic materials--Determination of coating mass per unit area--Gravimetric methods 金属材料上的转化膜 单位面积膜质量的测定 重量法 |
China National Standards Metal |
English PDF |
GB/T 4957-2003 |
Non-conductive coatings on non-magnetic basis Metals--Measurement of coating thickness--Eddy current 非磁性基体金属上非导电覆盖层 覆盖层厚度测量 涡流法 |
China National Standards Metal |
English PDF |
GB/T 19351-2003 |
Metallic coatings--Determination of porosity in gold coatings on metal substrates--Nitric acid vapour test 金属覆盖层 金属基体上金覆盖层孔隙率的测定 硝酸蒸汽试验 |
China National Standards Metal |
English PDF |
GB 15210-2003 |
General specification for walk-through Metal detector 通过式金属探测门通用技术规范 |
China National Standards Metal |
English PDF |
GB 12899-2003 |
General specification for hand-held Metal detector 手持式金属探测器通用技术规范 |
China National Standards Metal |
English PDF |
GB/T 19317.1-2003 |
Small craft--Seacocks and through-hull fittings--Part 1: Metallic 小艇 通海旋塞及贯穿艇体的附件 第1部分:金属件 |
China National Standards Metal |
English PDF |
GB/T 1996-2003 |
Coke for Metallurgy 冶金焦炭 |
China National Standards Metal |
English PDF |
GB/T 19292.4-2003 |
Corrosion of Metals and alloys--Corrosivity of atmospheres--Determination of corrosion rate of standard specimens for the evaluation of corrosivity 金属和合金的腐蚀 大气腐蚀性 用于评估腐蚀性的标准试样的腐蚀速率的测定 |
China National Standards Metal |
English PDF |
GB/T 19292.3-2003 |
Corrosion of Metals and alloys--Corrosivity of atmospheres--Measurement of pollution 金属和合金的腐蚀 大气腐蚀性 污染物的测量 |
China National Standards Metal |
English PDF |
GB/T 19292.2-2003 |
Corrosion of Metals andalloys--Corrosivity of atmospheres--Guiding values for the corrosivity categories 金属和合金的腐蚀 大气腐蚀性 腐蚀等级的指导值 |
China National Standards Metal |
English PDF |
GB/T 19292.1-2003 |
Corrosion of Metals and alloys--Corrosivity of atmospheres--Classification 金属和合金的腐蚀 大气腐蚀性 分类 |
China National Standards Metal |
English PDF |
GB/T 19291-2003 |
Corrosion of Metals and alloys--General principles for corrosion testing 金属和合金的腐蚀 腐蚀试验一般原则 |
China National Standards Metal |
English PDF |
GB/T 9129-2003 |
Specifications of non-Metallic flat gaskets for pipe flanges 管法兰用非金属平垫片 技术条件 |
China National Standards Metal |
English PDF |
GB/T 19066.3-2003 |
Specifications of flexible graphitecorrugated Metal gaskets 柔性石墨金属波齿复合垫片 技术条件 |
China National Standards Metal |
English PDF |
GB/T 19076-2003 |
Sintered Metal materials--Specifications 烧结金属材料规范 |
China National Standards Metal |
English PDF |
GB/T 16886.15-2003 |
Biological evaluation of medical devices--Part 15:Identification and quantification of degradation products from Metals and alloys 医疗器械生物学评价 第15部分:金属与合金降解产物的定性与定量 |
China National Standards Metal |
English PDF |
GB/T 6394-2002 |
Metal-methids for estimating the average grain size 金属平均晶粒度测定法 |
China National Standards Metal |
English PDF |
GB/T 18876.1-2002 |
Standard practice for determining the Metallographical constituent and inclusion content of steels and other metals by automatic image analysis--Part 1:Determining the inclusion or second-phase constituent content of steels and other metals by automatic 应用自动图像分析测定钢和其他金属中金相组织、夹杂物含量和级别的标准试验方法 第1部分:钢和其他金属中夹杂物或第二相组织含量的图像分析与体视学测定 |
China National Standards Metal |
English PDF |
GB/T 18847-2002 |
Polyvinyl chloride laminated sheet-Metal 聚氯乙烯覆膜金属板 |
China National Standards Metal |
English PDF |
GB/T 18838.1-2002 |
Preparation of steel substrates before application of paints and related products--Specifications for Metallic blast-cleaning abrasives--General introduction and classification 涂覆涂料前钢材表面处理 喷射清理用金属磨料的技术要求 导则和分类 |
China National Standards Metal |
English PDF |
GB/T 17850.1-2002 |
Preparation of steel substrates before application of paints and related products--Specifications for non-Metallic blast-cleaning abrasives--General introductionand classification 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 导则和分类 |
China National Standards Metal |
English PDF |
GB/T 6461-2002 |
Methodsfor corrosion testing of Metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests 金属基体上金属和其他无机覆盖层 经腐蚀试验后的试样和试件的评级 |
China National Standards Metal |
English PDF |
GB/T 12599-2002 |
Metallic coatings--Electroplated coatings of tin--Specification and test methods 金属覆盖层 锡电镀层 技术规范和试验方法 |
China National Standards Metal |
English PDF |
GB/T 8643-2002 |
Lubricated Metal-powder mixes--Determination of lubricant content--Modified Soxhlet extraction method 含润滑剂金属粉末中润滑剂含量的测定 修正的索格利特(Soxhlet) 萃取法 |
China National Standards Metal |
English PDF |
GB/T 5319-2002 |
Sintered Metal materials,excluding hardmetals--Determination of transverse rupture strength 烧结金属材料(不包括硬质合金) 横向断裂强度的测定 |
China National Standards Metal |
English PDF |
GB/T 5160-2002 |
Metallic powders--Determination of green strength by transverse rupture of rectangular compacts 金属粉末生坯强度的测定 矩形压坯横向断裂法 |
China National Standards Metal |
English PDF |
GB/T 8651-2002 |
Metal plates--Flaw detection method by the ultras-onic plate wave 金属板材超声板波探伤方法 |
China National Standards Metal |
English PDF |
GB/T 18762-2002 |
Filler precious Metal and their alloy brazing materials 贵金属及其合金钎料 |
China National Standards Metal |
English PDF |
GB/T 13912-2002 |
Metallic coatings--Hot dip galvanized coatings on fabricated iron and steel articles--Specifications and test methods 金属覆盖层 钢铁制件热浸镀锌层技术要求及试验方法 |
China National Standards Metal |
English PDF |
GB/T 9097.1-2002 |
Sintered Metal materials,excluding hardmetals--Determination of apparent hardness--Part 1:Materials of essentially uniform section hardness 烧结金属材料(不包括硬质合金)表观硬度的测定 第一部分:截面硬度基本均匀的材料 |
China National Standards Metal |
English PDF |
GB/T 9096-2002 |
Sintered Metal materials,excluding hardmetals--Impact test method 烧结金属材料(不包括硬质合金)冲击试验方法 |
China National Standards Metal |
English PDF |
GB/T 10425-2002 |
Sintered Metal friction materials--Determination of apparent hardness 烧结金属摩擦材料 表观硬度的测定 |
China National Standards Metal |
English PDF |
GB/T 10424-2002 |
Sintered Metal friction materials--Determination of compressive strength 烧结金属摩擦材料 抗压强度的测定 |
China National Standards Metal |
English PDF |
GB/T 10423-2002 |
Sintered Metal friction materials--Determination of tensile strength 烧结金属摩擦材料 抗拉强度的测定 |
China National Standards Metal |
English PDF |
GB/T 10422-2002 |
Sintered Metal friction materials--Determination of transverse rupture strength 烧结金属摩擦材料 横向断裂强度的测定 |
China National Standards Metal |
English PDF |
GB/T 10421-2002 |
Sintered Metal friction materials--Determination of density 烧结金属摩擦材料 密度的测定 |
China National Standards Metal |
English PDF |
GB/T 18616-2002 |
Corrugated flexible Metallic hose assmeblies for the protection of electrical cables in explosive atomspheres 爆炸性环境保护电缆用的波纹金属软管 |
China National Standards Metal |
English PDF |
GB/T 18615-2002 |
Non-alloyed and stainless steel fittings for corrugated flexible Metallic hoses 波纹金属软管用非合金钢和不锈钢接头 |
China National Standards Metal |
English PDF |
GB/T 984-2001 |
Hardfacing electrodes for shielded Metal arc welding 堆焊焊条 |
China National Standards Metal |
English PDF |
GB/T 3669-2001 |
Aluminium and aluminium-alloy electrodes for shielded Metal arc welding 铝及铝合金焊条 |
China National Standards Metal |
English PDF |
Find out:1661Items | To Page of: First -Previous-Next -Last | [9] [10] [11] [12] [13] [14] [15] |