Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 7113.3-2011 |
Flexible insulating sleeving - Part 3：Glass textile sleeing with PVC coating 绝缘软管 第3部分：聚氯乙烯玻璃纤维软管 |
China National Standards |
 English PDF |
| GB/T 6968-2011 |
Diaphragm gas meters 膜式燃气表 |
China National Standards |
English PDF |
| GB/T 6163-2011 |
Methods of measurement on radio receivers for FM broadcast transmissions 调频广播接收机测量方法 |
China National Standards |
English PDF |
| GB/T 5203-2011 |
Safety logic assemblies of nuclear reactor characteristics and test methods 核反应堆安全逻辑装置特性和检验方法 |
China National Standards |
English PDF |
| GB/T 5111-2011 |
Acoustics - Measurement of noise emitted by railbound vehicle 声学 轨道机车车辆发射噪声测量 |
China National Standards |
English PDF |
| GB/T 3449-2011 |
Acoustics - Measurement of noise inside railbound vehicles 声学 轨道车辆内部噪声测量 |
China National Standards |
English PDF |
| GB/T 2846-2011 |
Methods of measurement on radio receivers for AM broadcast transmissions 调幅广播收音机测量方法 |
China National Standards |
English PDF |
| GB/T 28238-2011 |
Requirements for after-sale services of sporting goods 体育用品售后服务的要求 |
China National Standards |
English PDF |
| GB/T 28237-2011 |
Inspection specification for artistic gymnastic podium of installing 竞技体操赛台安装验收规范 |
China National Standards |
English PDF |
| GB/T 28236-2011 |
Method of chromosome aberration analysis for biological dose assessment 染色体畸变估算生物剂量方法 |
China National Standards |
English PDF |
| GB/T 28230-2011 |
Enumeration of coliforms in ballast water of entry-exit ships by membrane filtration 膜过滤法测定入出境船舶压舱水中大肠菌群 |
China National Standards |
English PDF |
| GB/T 28229-2011 |
Detection of diarrheagenic Escherichia coli in ballast water of entry-exit ships 入出境船舶压舱水中致泻大肠埃希氏菌的检验方法 |
China National Standards |
English PDF |
| GB/T 28228-2011 |
Detection of Listeria monocytogenes in ballast water of entry-exit ships 入出境船舶压舱水中单核细胞增生李斯特氏菌的检验方法 |
China National Standards |
English PDF |
| GB/T 28227.7-2011 |
Guidelines for the implementation of quality management system of cultural service - Part 7: Theatre 文化服务质量管理体系实施指南 第7部分：剧院 |
China National Standards |
English PDF |
| GB/T 28227.6-2011 |
Guidelines for the implementation of quality management system of cultural service - Part 6: Cinema 文化服务质量管理体系实施指南 第6部分：影院 |
China National Standards |
English PDF |
| GB/T 28227.5-2011 |
Guidelines for the implementation of the quality management system of cultural service - Part 5: Audio-video products and electronic publications reproductions 文化服务质量管理体系实施指南 第5部分：音像及电子出版物复制 |
China National Standards |
English PDF |
| GB/T 28227.4-2011 |
Guidelines for the implementation of the quality management system of cultural service - Part 4: Sales and leasing of audio-video products 文化服务质量管理体系实施指南 第4部分：音像制品销售和出租 |
China National Standards |
English PDF |
| GB/T 28227.3-2011 |
Guidelines for the implementation of the quality management system of cultural service - Part 3: Open air museum 文化服务质量管理体系实施指南 第3部分：室外博物馆 |
China National Standards |
English PDF |
| GB/T 28227.2-2011 |
Guidelines for the implementation of the quality management system of cultural service??Part 2: Indoor museum 文化服务质量管理体系实施指南 第2部分:室内博物馆 |
China National Standards |
English PDF |
| GB/T 28227.1-2011 |
Guidelines for the implementation of quality management system of cultural service - Part 1: General 文化服务质量管理体系实施指南 第1部分：总则 |
China National Standards |
English PDF |
| GB/T 27968-2011 |
Grade assessment and classification for auction enterprises 拍卖企业的等级评估与等级划分 |
China National Standards |
English PDF |
| GB/T 27931-2011 |
Banking -Nostro accounts reconciliation 银行业务 往账对账 |
China National Standards |
English PDF |
| GB/T 27929-2011 |
Banking - Requirements for message authentication using symmetric techniques 银行业务 采用对称加密技术进行报文鉴别的要求 |
China National Standards |
English PDF |
| GB/T 27928.1-2011 |
Certificate management for financial services - Part 1: Public key certificates 金融业务 证书管理 第1部分：公钥证书 |
China National Standards |
English PDF |
| GB/T 27927-2011 |
Banking and related financial services - Triple DEA - Modes of operation - Implementation guidelines 银行业务和相关金融服务 三重数据加密算法操作模式 实施指南 |
China National Standards |
English PDF |
| GB/T 27926.5-2011 |
Financial services - Universal financial industry message scheme - Part 5: Reverse engineering 金融服务 金融业通用报文方案 第5部分：反向工程 |
China National Standards |
English PDF |
| GB/T 27926.4-2011 |
Financial services - Universal financial industry message scheme - Part 4: XML design rules 金融服务 金融业通用报文方案 第4部分：XML 设计规则 |
China National Standards |
English PDF |
| GB/T 27926.3-2011 |
Financial services - Universal financial industry message scheme - Part 3: Modelling guidelines 金融服务 金融业通用报文方案 第3部分：建模导则 |
China National Standards |
English PDF |
| GB/T 27926.2-2011 |
Financial services - Universal financial industry message scheme - Part 2: Roles and responsibilities of registration bodies 金融服务 金融业通用报文方案 第2部分：注册机构的角色及职责 |
China National Standards |
English PDF |
| GB/T 27926.1-2011 |
Financial services - Universal financial industry message scheme - Part 1: Overall methodology and format specifications for inputs and outputs from the repository 金融服务 金融业通用报文方案 第1部分：库输入输出方法和格式规范 |
China National Standards |
English PDF |
| GB/T 27924-2011 |
Sizes and load ratings for industrial rack 工业货架规格尺寸与额定荷载 |
China National Standards |
English PDF |
| GB/T 27923-2011 |
Goods classification and code for logistics operation 物流作业货物分类和代码 |
China National Standards |
English PDF |
| GB/T 27917.3-2011 |
Express service - Part 3: Service procedures 快递服务 第3部分：服务环节 |
China National Standards |
English PDF |
| GB/T 27917.2-2011 |
Express service - Part 2: Organization requirements 快递服务 第2部分：组织要求 |
China National Standards |
English PDF |
| GB/T 27917.1-2011 |
Express service - Part 1: Basic terminology 快递服务 第1部分：基本术语 |
China National Standards |
English PDF |
| GB/T 27890-2011 |
Marine cryogenic stainless steel socket welding fittings 船用超低温不锈钢承插焊接头 |
China National Standards |
English PDF |
| GB/T 27889-2011 |
Ships and marine technology - Terms, abbreviations, graphical symbols and concepts on navigation 船舶和海上技术 导航术语、缩略语、图形符号和概念 |
China National Standards |
English PDF |
| GB/T 27767-2011 |
Two-dimensional barcode - Compact matrix code 二维条码 紧密矩阵码 |
China National Standards |
English PDF |
| GB/T 27766-2011 |
Two-dimensional barcode - Grid matrix code 二维条码 网格矩阵码 |
China National Standards |
English PDF |
| GB/T 27765-2011 |
Testing methods of SiO2, TiO2, Fe3O4 and Al2O3 nanoparticles biological effect by transmission electron microscope (TEM) SiO2、TiO2、Fe3O4及Al2O3纳米颗粒生物效应的透射电子显微镜检测方法 |
China National Standards |
English PDF |
| GB/T 27763-2011 |
Acoustics - Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance 声学 评价工作间声学性能的空间声场分布曲线的测量方法及参量表述 |
China National Standards |
English PDF |
| GB/T 27762-2011 |
Standard test method for mass scale calibration of thermogravimetric analyzers 热重分析仪质量示值校准的试验方法 |
China National Standards |
English PDF |
| GB/T 27761-2011 |
Standard test method of mass loss and residue measurement validation of thermogravimetric analyzers 热重分析仪失重和剩余量的试验方法 |
China National Standards |
English PDF |
| GB/T 27760-2011 |
Test method for calibrating the z-magnification of an atomic force microscope at subnanometer displacement levels using si (111) monatomic steps 利用Si（111）晶面原子台阶对原子力显微镜亚纳米高度测量进行校准的方法 |
China National Standards |
English PDF |
| GB/T 27759-2011 |
Measurement of fluid flow - Procedures for the evaluation of uncertainties 流体流量测量 不确定度评定程序 |
China National Standards |
English PDF |
| GB/T 27758.1-2011 |
Industrial automation systems and integration - Diagnostics, capability assessment and maintenance applications integration - Part 1: Overview and general requirements 工业自动化系统与集成 诊断、能力评估以及维护应用集成 第1部分：综述与通用要求 |
China National Standards |
English PDF |
| GB/T 27757-2011 |
Reference electrodes for the measurement of pH value pH值测定用参比电极 |
China National Standards |
English PDF |
| GB/T 27756-2011 |
Glass electrodes for the measurement of pH value pH值测定用玻璃电极 |
China National Standards |
English PDF |
| GB/T 27755-2011 |
Technical requirements of optical watermark anti-counterfeit 光学水印防伪技术条件 |
China National Standards |
English PDF |
| GB/T 27752-2011 |
Validation of the strength of uranium reference solution, plutonium reference solution and potassium dichromate reference solution 铀、钚和重铬酸钾标准溶液浓度的确认 |
China National Standards |
English PDF |
| GB/T 27751-2011 |
Specification for AgNiC contact 银镍石墨电触头技术条件 |
China National Standards |
English PDF |
| GB/T 27750-2011 |
Classification of insulating liquids 绝缘液体的分类 |
China National Standards |
English PDF |
| GB/T 27749-2011 |
Test procedure for thermal endurance of insulating varnishes - Electric strength method 绝缘漆耐热性试验规程 电气强度法 |
China National Standards |
English PDF |
| GB/T 27748.3-2011 |
Stationary fuel cell power system - Part 3：Installation 固定式燃料电池发电系统 第3部分：安装 |
China National Standards |
English PDF |
| GB/T 27748.1-2011 |
Stationary fuel cell power system - Part 1：Safety 固定式燃料电池发电系统 第1部分：安全 |
China National Standards |
English PDF |
| GB/T 27747-2011 |
High-voltage alternating current disconnecting circuit-breakers for rated voltages of 72.5 kV and above 额定电压72.5 kV及以上交流隔离断路器 |
China National Standards |
English PDF |
| GB/T 27746-2011 |
Technical specification for metal oxide varistors（MOV）used in low-voltage apparatus 低压电器用金属氧化物压敏电阻器(MOV)技术规范 |
China National Standards |
English PDF |
| GB/T 27745-2011 |
Communication specification for low-voltage electrical apparatus 低压电器通信规范 |
China National Standards |
English PDF |
| GB/T 27744-2011 |
Specification for premium efficiency three-phase permanent magnet synchronous motor（frame size 132~280） 超高效三相永磁同步电动机技术条件(机座号132-280) |
China National Standards |
English PDF |
| GB/T 27743-2011 |
Inspection method for transformer of special equipment 变压器专用设备检测方法 |
China National Standards |
English PDF |
| GB/T 27703-2011 |
Information and documentation - Document storage requirements for archive and library materials 信息与文献 图书馆和档案馆的文献保存要求 |
China National Standards |
English PDF |
| GB/T 27702-2011 |
Information and documentation - Information retrieval(Z39.50) - Application service definition and protocol specification 信息与文献 信息检索(Z39.50)应用服务定义和协议规范 |
China National Standards |
English PDF |
| GB/T 27700.2-2011 |
Surface acoustic wave (SAW) filters of assessed quality - Part 2: Guidance on use 有质量评定的声表面波（SAW）滤波器 第2部分：使用指南 |
China National Standards |
English PDF |
| GB/T 27700.1-2011 |
Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification 有质量评定的声表面波（SAW）滤波器 第1部分：总规范 |
China National Standards |
English PDF |
| GB/T 27669-2011 |
Non-destructive testing - Ultrasonic inspection - Evaluating electronic characteristics of ultrasonic test instruments 无损检测 超声检测 超声检测仪电性能评定 |
China National Standards |
English PDF |
| GB/T 27668.1-2011 |
Vocabulary for microscopy - Part 1: Light microscopy 显微术术语 第1部分: 光学显微术 |
China National Standards |
English PDF |
| GB/T 27667-2011 |
Quality evaluation of optical systems - Determination of distortion 光学系统像质评价 畸变的测定 |
China National Standards |
English PDF |
| GB/T 27666-2011 |
Evaluation and test method for beam quality of manufacturing laser system 制造用激光器光束质量的评价和测试方法 |
China National Standards |
English PDF |
| GB/T 27665-2011 |
Test methods for lasing capability of Nd:YAG laser rods 掺钕钇铝石榴石激光棒激光性能测量方法 |
China National Standards |
English PDF |
| GB/T 27664.2-2011 |
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2：Probes 无损检测 超声检测设备的性能与检验 第2部分：探头 |
China National Standards |
English PDF |
| GB/T 27664.1-2011 |
Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1：Instruments 无损检测 超声检测设备的性能与检验 第1部分：仪器 |
China National Standards |
English PDF |
| GB/T 27663-2011 |
Total station 全站仪 |
China National Standards |
English PDF |
| GB/T 27662-2011 |
Test methods for pointing and positional stability of laser beam 激光光束指向和位置稳定性测试方法 |
China National Standards |
English PDF |
| GB/T 27661-2011 |
Test methods for single-pass loss coefficient of laser robs 激光棒单程损耗系数的测量方法 |
China National Standards |
English PDF |
| GB/T 27660-2011 |
Optical transfer function - Lenses for office copiers 光学传递函数 用于办公复印机用镜头 |
China National Standards |
English PDF |
| GB/T 26218.3-2011 |
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 3: Composite insulators for a.c. systems 污秽条件下使用的高压绝缘子的选择和尺寸确定 第3部分：交流系统用复合绝缘子 |
China National Standards |
English PDF |
| GB/T 28220-2011 |
Public library service specifications 公共图书馆服务规范 |
China National Standards |
English PDF |
| GB/T 22657.2-2011 |
Writing specifications on mail item - Part 2：international 邮件封面书写规范 第2部分：国际 |
China National Standards |
English PDF |
| GB/T 22517.6-2011 |
Technical requirements and test methods for sports filed - Part 6： Track and field 体育场地使用要求及检验方法 第6部分：田径场地 |
China National Standards |
English PDF |
| GB/T 22281.2-2011 |
Condition monitoring and diagnostics of machines - Data processing, communication and presentation - Part 2: Data processing 机器的状态监测和诊断 数据处理、通信和表达 第2部分：数据处理 |
China National Standards |
English PDF |
| GB/T 20633.3-2011 |
Coatings for loaded printed wire boards (conformal coatings) - Part 3：Coatings for general purpose (Class 1), high reliability (Class 2) and aerospace(Class 3) 承载印制电路板用涂料(敷形涂料) 第3部分：一般用(1级)、高可靠性用(2级)和航空航天用(3级)涂料 |
China National Standards |
English PDF |
| GB/T 20633.2-2011 |
Coatings for loaded printed wire boards (conformal coatings) - Part 2：Methods of test 承载印制电路板用涂料(敷形涂料) 第2部分：试验方法 |
China National Standards |
English PDF |
| GB/T 2018-2011 |
Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape 磁带录音机测量方法 |
China National Standards |
English PDF |
| GB/T 20159.4-2011 |
Classification of environmental condition - Guidance for the correlation and transformation of environmental condition classes to the environmental tests - Stationary use at non-weatherprotected locations 环境条件分类 环境条件分类与环境试验之间的关系及转换指南 无气候防护场所固定使用 |
China National Standards |
English PDF |
| GB/T 20159.3-2011 |
Classification of environmental conditions - Guidance for the correlation and transformation of environmental condition classes to the environmental tests - Stationary use at weatherprotected locations 环境条件分类 环境条件分类与环境试验之间的关系及转换指南 有气候防护场所固定使用 |
China National Standards |
English PDF |
| GB/T 20042.6-2011 |
Proton exchange membrane fuel cell - Part 6: Test method of bipolar plate properties 质子交换膜燃料电池 第6部分：双极板特性测试方法 |
China National Standards |
English PDF |
| GB/T 19902.5-2011 |
Industrial automation systems and integration - Manufacturing software capability profiling for interoperability - Part 5: Methodology for profile matching using multiple capability classes structures 工业自动化系统与集成 制造软件互操作性能力建规 第5部分：基于多能力类结构进行专规匹配的方法学 |
China National Standards |
English PDF |
| GB/T 19264.1-2011 |
Pressboard and presspaper for electrical purposes - Part 1: Definitions and general requirements 电气用压纸板和薄纸板 第1部分：定义和一般要求 |
China National Standards |
English PDF |
| GB/T 18729-2011 |
Specification of enterprise information integration in network environment 基于网络的企业信息集成规范 |
China National Standards |
English PDF |
| GB/T 18726-2011 |
Software interface specification of integrated technology of modern design engineering 现代设计工程集成技术的软件接口规范 |
China National Standards |
English PDF |
| GB/T 18206-2011 |
Requirement of health education in primary and middle school 中小学健康教育规范 |
China National Standards |
English PDF |
| GB/T 17576-2011 |
Compact disc digital audio system CD数字音频系统 |
China National Standards |
English PDF |
| GB/T 17003.1-2011 |
Anti-counterfeiting paper - Part 1：Anti-alter paper 防伪纸 第1部分：防涂改纸 |
China National Standards |
English PDF |
| GB/T 17001.1-2011 |
Anti-counterfeiting printing ink - Part 1：Ultraviolet fluorescent anti-counterfeiting printing ink 防伪油墨 第1部分：紫外激发荧光防伪油墨 |
China National Standards |
English PDF |
| GB/T 16935.4-2011 |
Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress 低压系统内设备的绝缘配合 第4部分：高频电压应力考虑事项 |
China National Standards |
English PDF |
| GB/T 16927.1-2011 |
High-voltage test techniques - Part 1: General definitions and test requirements 高电压试验技术 第1部分：一般定义及试验要求 |
China National Standards |
English PDF |
| GB/T 16886.2-2011 |
Biological evaluation of medical devices - Part 2: Animal welfare requirements 医疗器械生物学评价 第2部分：动物福利要求 |
China National Standards |
English PDF |
| GB/T 16886.19-2011 |
Biological evaluation of medical devices - Part 19: Physico-chemical,morphological and topographical characterization of materials 医疗器械生物学评价 第19部分：材料物理化学、形态学和表面特性表征 |
China National Standards |
English PDF |
| GB/T 16886.18-2011 |
Biological evaluation of medical devices - Part 18: Chemical characterization of materials 医疗器械生物学评价 第18部分：材料化学表征 |
China National Standards |
English PDF |
| GB/T 16886.11-2011 |
Biological evaluation of medical devices - Part 11: Tests for systemic toxicity 医疗器械生物学评价 第11部分：全身毒性试验 |
China National Standards |
English PDF |
| Find out:57327Items | To Page of: First -Previous-Next -Last | [310] [311] [312] [313] [314] [315] [316] |
+86-755-25831330
