Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 18400.9-2007 |
Test conditions for machining centres - Part 9: Evaluation of the operating times of tool change and pallet change 加工中心检验条件 第9部分：刀具交换和托板交换操作时间的评定 |
China National Standards tin |
 English PDF |
| GB/T 20897.2-2007 |
Inflatable boats - Part 2: Boats with a maximum motor power rating of 4.5 kW to 15 kW inclusive 充气艇 第2部分: 发动机最大额定功率为4.5kW～15kW的艇 |
China National Standards tin |
English PDF |
| GB/T 13342-2007 |
Specification for marine reciprocating hydraulic cylinder 船用往复式液压缸通用技术条件 |
China National Standards tin |
English PDF |
| GB/T 11144-2007 |
Standard test method for measurement of extreme-perssure prosperties of lubricating fluids - Timken method 润滑液极压性能测定法 梯姆肯法 |
China National Standards tin |
English PDF |
| GB/T 4798.7-2007 |
Environmental conditions existing in the application of electric and electronic products - Section 7: Portable and non-stationary use 电工电子产品应用环境条件 第7部分：携带和非固定使用 |
China National Standards tin |
English PDF |
| GB/T 4798.5-2007 |
Environmental conditions existing in the application of electric and electronic products - Section 5: Ground vehicle installations 电工电子产品应用环境条件 第5部分：地面车辆使用 |
China National Standards tin |
English PDF |
| GB/T 4798.4-2007 |
Environmental conditions existing in the application of electric and electronic products - Section 4: Stationary use at non-weather-protected locations 电工电子产品应用环境条件 第4部分：无气候防护场所固定使用 |
China National Standards tin |
English PDF |
| GB/T 4798.3-2007 |
Environmental conditions existing in the application of electric and electronic products - Section 3: Stationary use at weather-protected locations 电工电子产品应用环境条件 第3部分：有气候防护场所固定使用 |
China National Standards tin |
English PDF |
| GB/T 20968-2007 |
Non-destructive testing - Aids to visual inspection - Selection of low-power magnifiers 无损检测 目视检测辅助工具 低倍放大镜的选用 |
China National Standards tin |
English PDF |
| GB/T 20967-2007 |
Non-destructive testing - Visual testing - General principles 无损检测 目视检测 总则 |
China National Standards tin |
English PDF |
| GB/T 18311.31-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements - Coupled power ratio measurement for fibre optic sources 纤维光学互连器件和无源器件 基本试验和测量程序 第3-31部分：检查和测量 纤维光学光源耦合功率比测量 |
China National Standards tin |
English PDF |
| GB/T 18311.30-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Polish angle and fibre position on single ferrule multifibre connectors 纤维光学互连器件和无源器件 基本试验和测量程序 第3-30部分：检查和测量 单套管多芯光纤连接器抛光角度和光纤位置 |
China National Standards tin |
English PDF |
| GB/T 18311.28-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss 纤维光学互连器件和无源器件 基本试验和测量程序 第3-28部分: 检查和测量 瞬间损耗 |
China National Standards tin |
English PDF |
| GB/T 18311.26-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-26: Examinations and measurements - Measurement of the angular misalignment between fibre and ferrule axes 纤维光学互连器件和无源器件 基本试验和测量程序 第3-26部分：检查和测量 光纤和插针轴线间的角偏差的测量 |
China National Standards tin |
English PDF |
| GB/T 18311.20-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices 纤维光学互连器件和无源器件 基本试验和测量程序 第3-20部分：检查和测量 纤维光学分路器件的方向性 |
China National Standards tin |
English PDF |
| GB/T 18311.16-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16: Examinations and measurements - Endface radius of spherically polished ferrules 纤维光学互连器件和无源器件 基本试验和测量程序 第3-16部分：检查和测量 球面抛光套管端面半径 |
China National Standards tin |
English PDF |
| GB/T 18310.48-2007 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests - Temperature-humidity cycling 纤维光学互连器件和无源器件 基本试验和测量程序 第2-48部分：试验 温度湿度循环 |
China National Standards tin |
English PDF |
| GB 14443-2007 |
Safety code for painting - Safety rules for paint drying oven 涂装作业安全规程 涂层烘干室安全技术规定 |
China National Standards tin |
English PDF |
| GB 14773-2007 |
Safety code for painting - Safety specification for electrostatic spray guns and associated apparatus 涂装作业安全规程 静电喷枪及其辅助装置安全技术条件 |
China National Standards tin |
English PDF |
| GB 8771-2007 |
Maximum limits for soluble elements content of pencil coating 铅笔涂层中可溶性元素最大限量 |
China National Standards tin |
English PDF |
| GB/T 8243.12-2007 |
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capacity 内燃机全流式机油滤清器试验方法 第12部分：采用颗粒计数法测定滤清效率和容灰量 |
China National Standards tin |
English PDF |
| GB/T 8243.11-2007 |
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 11: Self-cleaning filters 内燃机全流式机油滤清器试验方法 第11部分：自净式滤清器 |
China National Standards tin |
English PDF |
| GB/T 6809.4-2007 |
Reciprocating internal combustion engines - Vocabulary of components and systems - Part 4: Pressure charging and air/exhaust gas ducting systems 往复式内燃机 零部件和系统术语 第4部分：增压及进排气管系统 |
China National Standards tin |
English PDF |
| GB/T 4127.16-2007 |
Bonded abrasive products - Dimensions - Part 16: Grinding wheels for cutting-off on hand held power tools 固结磨具 尺寸 第16部分：手持式电动工具用切割砂轮 |
China National Standards tin |
English PDF |
| GB/T 4127.15-2007 |
Bonded abrasive products - Dimensions - Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines 固结磨具 尺寸 第15部分：固定式或移动式切割机用切割砂轮 |
China National Standards tin |
English PDF |
| GB/T 20971-2007 |
Petroleum and natural gas industries - Equipment for well cementing - Performance testing of cementing float equipment 石油天然气工业 固井设备 注水泥浮动装置性能测试 |
China National Standards tin |
English PDF |
| GB/T 20958.2-2007 |
Test conditions for CNC bed-type milling machines - Testing of the accuracy - Part 2: Milling machines with vertical spindle 数控床身铣床检验条件 精度检验 第2部分: 立式铣床 |
China National Standards tin |
English PDF |
| GB/T 20958.1-2007 |
Test conditions for CNC bed-type milling machines - Testing of the accuracy - Part 1: Milling machines with horizontal spindle 数控床身铣床检验条件 精度检验 第1部分: 卧式铣床 |
China National Standards tin |
English PDF |
| GB/T 20956-2007 |
Printing machinery - Safety requirements of the design and construction for cutting machines 印刷机械 切纸机设计及结构安全规则 |
China National Standards tin |
English PDF |
| GB/T 20955-2007 |
Metal cutting tools - Terms in Taps 金属切削刀具 丝锥术语 |
China National Standards tin |
English PDF |
| GB/T 20954-2007 |
Metal cutting tools - Terms in twist drills 金属切削刀具 麻花钻术语 |
China National Standards tin |
English PDF |
| GB/T 20949-2007 |
Prescription for installation of the lighting and light-signalling devices for wheeled agricultural and forestry tractors 农林轮式拖拉机 照明和灯光信号装置的安装规定 |
China National Standards tin |
English PDF |
| GB/T 20947-2007 |
Short-link chain for lifting purposes - Grade T,(types T,DAT and DT),fine-tolerance hoist chain 起重用短环链 T级(T、DAT和DT型)高精度葫芦链 |
China National Standards tin |
English PDF |
| GB/T 20946-2007 |
short link chain for lifting purposes - General conditions of acceptance 起重用短环链 验收总则 |
China National Standards tin |
English PDF |
| GB/T 20995-2007 |
Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators 输配电系统的电力电子技术 静止无功补偿装置用晶闸管阀的试验 |
China National Standards tin |
English PDF |
| GB/T 20990.1-2007 |
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing 高压直流输电晶闸管阀 第1部分：电气试验 |
China National Standards tin |
English PDF |
| GB/T 13606-2007 |
Instrument for geotechnical engineering - General specifications of vibrating wire sensor 土工试验仪器 岩土工程仪器 振弦式传感器通用技术条件 |
China National Standards tin |
English PDF |
| GB/T 15970.9-2007 |
Corrosion of metal and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement 金属和合金的腐蚀 应力腐蚀试验 第9部分：渐增式载荷或渐增式位移下的预裂纹试样的制备和应用 |
China National Standards tin |
English PDF |
| GB/T 15970.6-2007 |
Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement 金属和合金的腐蚀 应力腐蚀试验 第6部分：恒载荷或恒位移下的预裂纹试样的制备和应用 |
China National Standards tin |
English PDF |
| GB/T 12782-2007 |
Motor vehicle - Heating performance requirement - Test method 汽车采暖性能要求和试验方法 |
China National Standards tin |
English PDF |
| GB/T 12535-2007 |
Motor vehicle - Starting performance - Test method 汽车起动性能试验方法 |
China National Standards tin |
English PDF |
| GB/T 10485-2007 |
Road vehicles - Lighting and light-signalling devices - Environmental endurance 道路车辆 外部照明和光信号装置 环境耐久性 |
China National Standards tin |
English PDF |
| GB/T 8733-2007 |
Aluminum alloy ingots for casting 铸造铝合金锭 |
China National Standards tin |
English PDF |
| GB/T 8180-2007 |
Wrought titanium and titanium alloy products packing, marking, transporting and storing 钛及钛合金加工产品的包装、标志、运输和贮存 |
China National Standards tin |
English PDF |
| GB/T 8013.3-2007 |
Anodic oxide coatings and organic polymer coatings on aluminium and its alloys - Part 3: Organic polymer coatings 铝及铝合金阳极氧化膜与有机聚合物膜 第3部分：有机聚合物喷涂膜 |
China National Standards tin |
English PDF |
| GB/T 8013.2-2007 |
Anodic oxide coatings and organic polymer coatings on aluminium and its alloys - Part 2: Combined anodic oxide coating 铝及铝合金阳极氧化膜与有机聚合物膜 第2部分：阳极氧化复合膜 |
China National Standards tin |
English PDF |
| GB/T 8013.1-2007 |
Anodic oxide coatings and organic polymer coatings on aluminium and its alloys - Part 1: Anodic oxide coatings 铝及铝合金阳极氧化膜与有机聚合物膜 第1部分：阳极氧化膜 |
China National Standards tin |
English PDF |
| GB/T 7452-2007 |
Mechanical vibration - Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships 机械振动 客船和商船适居性振动测量、报告和评价准则 |
China National Standards tin |
English PDF |
| GB/T 3250-2007 |
Aluminium and aluminium alloys shear test method for rivet wire and rivets and riveting test method for rivet wire 铝及铝合金铆钉线与铆钉剪切试验方法及铆钉线铆接试验方法 |
China National Standards tin |
English PDF |
| GB/T 3199-2007 |
Wrought aluminium and aluminium alloy products - Packing,marking,transporting and storing 铝及铝合金加工产品包装、标志、运输、贮存 |
China National Standards tin |
English PDF |
| GB/T 20929-2007 |
The methods of testing acidithiobacillus ferrooxidans and its activity by microarray technology 嗜酸氧化亚铁硫杆菌及其活性的基因芯片检测方法 |
China National Standards tin |
English PDF |
| GB/T 17626.16-2007 |
Electromagnetic compatibility - Testing and measurement techniques - Test for immunity to conducted，common mode disturbances in the frequency range 0Hz to 150kHz 电磁兼容 试验和测量技术 0Hz～150kHz共模传导骚扰抗扰度试验 |
China National Standards tin |
English PDF |
| GB 15930-2007 |
Fire dampers for building venting and smoke-venting system 建筑通风和排烟系统用防火阀门 |
China National Standards tin |
English PDF |
| GB/T 17470-2007 |
Glass fiber mats - chopped strand and continuous filament mats 玻璃纤维短切原丝毡和连续原丝毡 |
China National Standards tin |
English PDF |
| GB 20906-2007 |
Safety requirements for high pressure metal die casting units 压铸单元安全技术要求 |
China National Standards tin |
English PDF |
| GB/T 20897.1-2007 |
Inflatable boats - Part 1: Boats with a maximum motor power rating of 4.5kW 充气艇 第1部分：发动机最大额定功率为4.5kW的艇 |
China National Standards tin |
English PDF |
| GB/T 4238-2007 |
Heat-resisting steel plate, sheet and strip 耐热钢钢板和钢带 |
China National Standards tin |
English PDF |
| GB/T 20887.1-2007 |
Continuously hot rolled high strength steel sheet and strip for automobile - Part 1: High yield strength steel for cold forming 汽车用高强度热连轧钢板及钢带 第1部分：冷成形用高屈服强度钢 |
China National Standards tin |
English PDF |
| GB/T 20878-2007 |
Stainless and heat-resisting steels - Designation and chemical composition 不锈钢和耐热钢 牌号及化学成分 |
China National Standards tin |
English PDF |
| GB/T 20854-2007 |
Corrosion of metals and alloys - accelerated testing involving cyclic exposure to salt mist, “dry“ and “wet“ condition 金属和合金的腐蚀 循环暴露在盐雾、“干”和“湿”条件下的加速试验 |
China National Standards tin |
English PDF |
| GB/T 20564.3-2007 |
Continuously cold rolled high strength steel sheet and strip for automobile - Part 3: High strength interstitial free steel 汽车用高强度冷连轧钢板及钢带 第3部分：高强度无间隙原子钢 |
China National Standards tin |
English PDF |
| GB/T 20564.1-2007 |
Continuously cold rolled high strength steel sheet and strip for automobile - Part 1：Bake hardening steel 汽车用高强度冷连轧钢板及钢带 第1部分：烘烤硬化钢 |
China National Standards tin |
English PDF |
| GB/T 20871.2-2007 |
Organic light emitting diode display - Part 2: Terminology and letter symbols 有机发光二极管显示器 第2部分：术语与文字符号 |
China National Standards tin |
English PDF |
| GB/T 18910.4-2007 |
Liquid crystal and solid-state display devices - Part 4: Liquid crystal display modules and cells - Essential ratings and characteristics 液晶和固态显示器件 第4部分：液晶显示模块和屏 基本额定值和特性 |
China National Standards tin |
English PDF |
| GB 20826-2007 |
Code of safety for the use of high pressure water jetting operation by divers 潜水员高压水射流作业安全规程 |
China National Standards tin |
English PDF |
| GB 50263-2007 |
Code for installation and acceptance of gas fire extinguishing systems 气体灭火系统施工及验收规范 |
China National Standards tin |
English PDF |
| GB 5959.8-2007 |
Safety in electroheat installations - Part 8: Particular requirements for electroslag remelting furnaces 电热装置的安全 第8部分：对电渣重熔炉的特殊要求 |
China National Standards tin |
English PDF |
| GB/T 20875.1-2007 |
Method of test the hydrolytic stability of electrical insulating materials - Part 1: Plastic films 电气绝缘材料水解稳定性的试验方法 第1部分：塑料薄膜 |
China National Standards tin |
English PDF |
| GB/T 20866-2007 |
Data acquisition unit based on pulse calibrating meter 基于户用脉冲计量表的数据采集器 |
China National Standards tin |
English PDF |
| GB/T 20819.2-2007 |
Controllers with analogue signals for use industrial-process control system - Part 2: Guidance for inspection and routine testing 工业过程控制系统用模拟信号控制器 第2部分：检查和例行试验导则 |
China National Standards tin |
English PDF |
| GB/T 20819.1-2007 |
Controllers with analogue signals for use industrial-process control system - Part 1: Methods of evaluating the performance 工业过程控制系统用模拟信号控制器 第1部分：性能评定方法 |
China National Standards tin |
English PDF |
| GB/T 20841-2007 |
Heating cables with a rated voltage of 300/500V for comfort heating and prevention of ice formation 额定电压300/500V生活设施加热和防结冰用加热电缆 |
China National Standards tin |
English PDF |
| GB/T 20833-2007 |
The guide for partial discharge measurements and evaluation on stator bar and winding insulation of rotating machinery 旋转电机定子线棒及绕组局部放电的测量方法及评定导则 |
China National Standards tin |
English PDF |
| GB/T 20831-2007 |
Methods of assessment of temperature capability of interlaminar insulation coatings of electrical sheet and strip 电工钢片（带）层间绝缘涂层温度特性测试方法 |
China National Standards tin |
English PDF |
| GB/T 20829-2007 |
Performance requirements and test method of fixed aerosol fire extinguishing systems for ships 船舶固定式气溶胶灭火系统 性能要求和试验方法 |
China National Standards tin |
English PDF |
| GB/T 7788-2007 |
General specification for anodic shield coating of ship and marine engineering 船舶及海洋工程阳极屏涂料通用技术条件 |
China National Standards tin |
English PDF |
| GB/T 20748-2006 |
Method for the determination of avermectins residues in bovine liver and muscles - LC-MS-MS method 牛肝和牛肉中阿维菌素类药物残留量的测定 液相色谱-串联质谱法 |
China National Standards tin |
English PDF |
| GB/T 20801.5-2006 |
Pressure piping code - Industrial piping - Part 5: Inspection and testing 压力管道规范 工业管道 第5部分：检验与试验 |
China National Standards tin |
English PDF |
| GB/T 10953-2006 |
Cutting-off tools for turning with clamp tips 机夹切断车刀 |
China National Standards tin |
English PDF |
| GB/T 20809-2006 |
The evaluating specification on the HACCP certification of the meat products 肉制品生产 HACCP 应用规范 |
China National Standards tin |
English PDF |
| GB/T 20782-2006 |
Contant phosphorus antidetonating ammonium nitrate for agriculture 农业用含磷型防爆硝酸铵 |
China National Standards tin |
English PDF |
| GB/T 20780-2006 |
Industrial circulating cooling water - Determination of carbonate alkalinity 工业循环冷却水 碳酸盐碱度的测定 |
China National Standards tin |
English PDF |
| GB/T 20777-2006 |
Paints and varnishes - Examination and prepration of samples for testing 色漆和清漆 试样的检查和制备 |
China National Standards tin |
English PDF |
| GB/T 20734-2006 |
Mounting requirements for liquefied natural gas vehicle special equipment 液化天然气汽车专用装置安装要求 |
China National Standards tin |
English PDF |
| GB/T 1768-2006 |
Paints and varnishes - Determination of resistance to abrasion - Rotating abrasive rubber wheel method 色漆和清漆 耐磨性的测定 旋转橡胶砂轮法 |
China National Standards tin |
English PDF |
| GB/T 15451-2006 |
Industrial circulating cooling water - Determination of total and composite alkalinity 工业循环冷却水 总碱及酚酞碱度的测定 |
China National Standards tin |
English PDF |
| GB/T 8243.7-2006 |
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 7: Vibration fatigue test 内燃机全流式机油滤清器试验方法 第7部分:振动疲劳试验 |
China National Standards tin |
English PDF |
| GB/T 8190.6-2006 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test 往复式内燃机 排放测量 第6部分：测量结果和试验报告 |
China National Standards tin |
English PDF |
| GB/T 20791-2006 |
Tractors for agriculture and forestry - Mountings and apertures for external equipment controls 农林拖拉机 外部装置操纵件用支架和孔口 |
China National Standards tin |
English PDF |
| GB/T 20789-2006 |
Equipment for harvesting and conservation - Round balers - Terminology and commercial specifications 收获和贮存机械 圆捆打捆机 术语和商用规范 |
China National Standards tin |
English PDF |
| GB/T 20787-2006 |
Reciprocating internal combustion engines - Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet 往复式内燃机 中、高速往复式内燃机底脚结构噪声测试规范 |
China National Standards tin |
English PDF |
| GB/T 20776-2006 |
classification for lifting appliances 起重机械分类 |
China National Standards tin |
English PDF |
| GB/T 10178-2006 |
Industrial fans-performance testing in situ 工业通风机 现场性能试验 |
China National Standards tin |
English PDF |
| GB/T 20737-2006 |
Non-destructive testing - General terms and definitions 无损检测 通用术语和定义 |
China National Standards tin |
English PDF |
| GB/T 12233-2006 |
General purpose industrial valves - Casting iron globe valves and lift check valves 通用阀门 铁制截止阀与升降式止回阀 |
China National Standards tin |
English PDF |
| GB 20817-2006 |
Rule for cotton quarantine 棉花检疫规程 |
China National Standards tin |
English PDF |
| GB/T 20704-2006 |
Rock drilling - Rotary drill-rods and rotary drill-bits for dry drilling - Connecting dimensions 岩石钻孔 干式钻杆和钻头 连接尺寸 |
China National Standards tin |
English PDF |
| GB/T 20702-2006 |
Test method for extinguishing property of gaseous extinguishing agent 气体灭火剂灭火性能测试方法 |
China National Standards tin |
English PDF |
| GB/T 7300-2006 |
Feed additive - Nicotinic acid 饲料添加剂 烟酸 |
China National Standards tin |
English PDF |
| GB/T 5169.21-2006 |
Fire hazard testing for electric and eletronic products - Part 21: Abnormal heat - Ball pressure test 电工电子产品着火危险试验 第21部分：非正常热 球压试验 |
China National Standards tin |
English PDF |
| Find out:7828Items | To Page of: First -Previous-Next -Last | [57] [58] [59] [60] [61] [62] [63] |
+86-755-25831330
