Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 5169.11-2006 |
Fire hazard testing for electric and electronic products - Part 11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products 电工电子产品着火危险试验 第11部分：灼热丝/热丝基本试验方法 成品的灼热丝可燃性试验方法 |
China National Standards tin |
 English PDF |
| GB/T 5169.10-2006 |
Fire hazard testing for electric and electronic products - Part 10: Glow/hot-wire based test methods - Glow-wire apparatus and common test procedure 电工电子产品着火危险试验 第10部分：灼热丝/热丝基本试验方法 灼热丝装置和通用试验方法 |
China National Standards tin |
English PDF |
| GB/T 4798.10-2006 |
Environmental conditions existing in the application of electric and electronic products - Guidance 电工电子产品应用环境条件 导言 |
China National Standards tin |
English PDF |
| GB/T 2424.6-2006 |
Environmental testing for electric and electronic products - Confirmation of the performance of temperature/humidity chambers 电工电子产品环境试验 温度/湿度试验箱性能确认 |
China National Standards tin |
English PDF |
| GB/T 2423.37-2006 |
Environmental testing for electric and electronic products - Part 2: Test methods - Test L：Dust and sand 电工电子产品环境试验 第2部分：试验方法 试验L：沙尘试验 |
China National Standards tin |
English PDF |
| GB/T 2423.3-2006 |
Environmental testing for electric and electronic products - Part 2: Testing method test Cab: Damp heat, Steady state 电工电子产品环境试验 第2部分：试验方法 试验Cab：恒定湿热试验 |
China National Standards tin |
English PDF |
| GB/T 17626.3-2006 |
Electromagnetic compatibility - Testing and measurement techniques - Radiated,radio-frequency, electromagnetic field immunity test 电磁兼容 试验和测量技术 射频电磁场辐射抗扰度试验 |
China National Standards tin |
English PDF |
| GB/T 17626.29-2006 |
Electromagnetic compatibility(EMC) - Testing and measurement techniques - Voltage dips,short interruptions and voltage variations on d.c. input power port immunity tests 电磁兼容 试验和测量技术 直流电源输入端口电压暂降、短时中断和电压变化的抗扰度试验 |
China National Standards tin |
English PDF |
| GB/T 17626.2-2006 |
Electromagnetic compatibility（EMC） - Testing and measurement techniques - Electrostatic discharge immunity test 电磁兼容 试验和测量技术 静电放电抗扰度试验 |
China National Standards tin |
English PDF |
| GB/T 5054.3-2006 |
Road vehicles - Multicore connecting cables -Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables 道路车辆 多芯电缆线 第3部分：无屏蔽护套低压电缆线的结构、尺寸和标记 |
China National Standards tin |
English PDF |
| GB/T 20703-2006 |
Electrical installations in ships equipment - Heating and cooking appliances 船舶电气装置 取暖和烹调电器 |
China National Standards tin |
English PDF |
| GB 15308-2006 |
Foam extinguishing agent 泡沫灭火剂 |
China National Standards tin |
English PDF |
| GB/T 5601-2006 |
Rules for inspecting and testing of failway freight car after completion of construction 铁道货车检查与试验规则 |
China National Standards tin |
English PDF |
| GB/T 16904.1-2006 |
Checking of rolling stock clearance for standard gauge railways - Part 1：Methods for inspecting 标准轨距铁路机车车辆限界检查 第1部分：检查方法 |
China National Standards tin |
English PDF |
| GB/T 12816-2006 |
The limiting value and measurement method for the interior noise in the railway passenger coach 铁道客车内部噪声限值及测量方法 |
China National Standards tin |
English PDF |
| GB/T 20730.1-2006 |
Industrial-process control systems -Instruments with analogue inputs and two- or multi-state outputs - Part 1: Methods of evaluating performance 工业过程控制系统用模拟输入两位或多位输出仪表 第1部分：性能评定方法 |
China National Standards tin |
English PDF |
| GB 20665-2006 |
Minimum allowable values of energy efficiency and energy efficiency grades for domestic gas instantaneous water heater and gas fired heating and hot water combi-boilers 家用燃气快速热水器和燃气采暖热水炉能效限定值及能效等级 |
China National Standards tin |
English PDF |
| GB/T 4169.21-2006 |
Components of injection moulds for plastics - Part 21: Rectangular locating element 塑料注射模零件 第21部分:矩形定位元件 |
China National Standards tin |
English PDF |
| GB/T 4169.18-2006 |
Components of injection moulds for plastics - Part 18: Locating ring 塑料注射模零件 第18部分:定位圈 |
China National Standards tin |
English PDF |
| GB/T 4169.11-2006 |
Components of injection moulds for plastics - Part 11: Round locating element 塑料注射模零件 第11部分：圆形定位元件 |
China National Standards tin |
English PDF |
| GB/T 20671.7-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 7: Standard test methods for tension testing of nonmetallic gasket materials 非金属垫片材料分类体系及试验方法 第7部分: 非金属垫片材料拉伸强度试验方法 |
China National Standards tin |
English PDF |
| GB/T 20671.10-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 10: Standard practice for evaluating thermal conductivity of gasket materials 非金属垫片材料分类体系及试验方法 第10部分: 垫片材料导热系数测定方法 |
China National Standards tin |
English PDF |
| GB/T 17626.8-2006 |
Electromagnetic compatibility(EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test 电磁兼容 试验和测量技术 工频磁场抗扰度试验 |
China National Standards tin |
English PDF |
| GB/T 17626.28-2006 |
Electromagnetic compatibility(EMC) - Testing and measurement techniques - Variation of power frequency,immunity test 电磁兼容 试验和测量技术 工频频率变化抗扰度试验 |
China National Standards tin |
English PDF |
| GB/T 17626.27-2006 |
Electromagnetic compatibility(EMC) - Testing and measurement techniques - Unbalance immunity test 电磁兼容 试验和测量技术 三相电压不平衡抗扰度试验 |
China National Standards tin |
English PDF |
| GB/T 17626.13-2006 |
Electromagnetic compatibility（EMC) - Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c.power port,low frequency immunity test 电磁兼容 试验和测量技术 交流电源端口谐波、谐间波及电网信号的低频抗扰度试验 |
China National Standards tin |
English PDF |
| GB/T 17626.1-2006 |
Electromagnetic compatibility - Testing and measurement techniques - Overview of immunity tests 电磁兼容 试验和测量技术 抗扰度试验总论 |
China National Standards tin |
English PDF |
| GB 20800.2-2006 |
General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres - Part 2: Group Ⅱengines for use in flammable dust atmospheres 爆炸性环境用往复式内燃机防爆技术通则 第2部分：可燃性粉尘环境用Ⅱ类内燃机 |
China National Standards tin |
English PDF |
| GB 20800.1-2006 |
General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres - Part 1: Group Ⅱengines for use in flammable gas and vapor atmospheres 爆炸性环境用往复式内燃机防爆技术通则 第1部分：可燃性气体和蒸汽环境用 Ⅱ类内燃机 |
China National Standards tin |
English PDF |
| GB/T 20633.1-2006 |
Coatings for loaded printed wire boards(conformal coating）- Part 1: Definitions,classification and general requirements 承载印制电路板用涂料（敷形涂料）第1部分：定义、分类和一般要求 |
China National Standards tin |
English PDF |
| GB/T 20626.2-2006 |
Specific environmental condition - Electrical and electronic products for plateau - Part 2: Selective types and testing specification 特殊环境条件 高原电工电子产品 第2部分：选型和检验规范 |
China National Standards tin |
English PDF |
| GB/T 1408.2-2006 |
Electrical strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage 绝缘材料电气强度试验方法 第2部分：对应用直流电压试验的附加要求 |
China National Standards tin |
English PDF |
| GB/T 1408.1-2006 |
Electrical strength of insulating materials - Test methods - Part 1: Tests at power frequencies 绝缘材料电气强度试验方法 第1部分：工频下试验 |
China National Standards tin |
English PDF |
| GB/T 14048.16-2006 |
Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection(PTC) for rotating electrical machines 低压开关设备和控制设备 第8部分：旋转电机用装入式热保护（PTC）控制单元 |
China National Standards tin |
English PDF |
| GB/T 11026.3-2006 |
Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics 电气绝缘材料 耐热性 第3部分：计算耐热特征参数的规程 |
China National Standards tin |
English PDF |
| GB/T 2423.56-2006 |
Environmental testing for electric and electronic products - Part 2: Test methods - Test Fh: Vibration、broad-band random(digital control) and guidance 电工电子产品环境试验 第2部分：试验方法 试验Fh：宽带随机振动（数字控制）和导则 |
China National Standards tin |
English PDF |
| GB/T 20639-2006 |
Artificial pollution testing of non-linear resistor type gapped arresters 有间隙阀式避雷器人工污秽试验 |
China National Standards tin |
English PDF |
| GB/T 20636-2006 |
Connecting device - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Particular requirements for conductors above 35mm2 up to 300mm2 连接器件 电气铜导线 螺纹型和非螺纹型夹紧件的安全要求 适用于35mm2以上至300mm2导线的特殊要求 |
China National Standards tin |
English PDF |
| GB/T 10066.8-2006 |
Test methods for electroheat installations - Part 8: Electroslag remelting furnaces 电热装置的试验方法 第8部分：电渣重熔炉 |
China National Standards tin |
English PDF |
| GB/T 10066.12-2006 |
Test methods for electroheat installations - Part 12: Infrared heating installations 电热装置的试验方法 第12部分：红外加热装置 |
China National Standards tin |
English PDF |
| GB/T 617-2006 |
Chemical reagent - General method for the determination of melting range 化学试剂 熔点范围测定通用方法 |
China National Standards tin |
English PDF |
| GB 20651.1-2006 |
Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines 往复式内燃机 安全 第1部分：压燃式发动机 |
China National Standards tin |
English PDF |
| GB/T 20564.2-2006 |
Continuously cold rolled high strength steel sheet and strip for automobile - Part 2: Dual phase steel 汽车用高强度冷连轧钢板及钢带 第2部分:双相钢 |
China National Standards tin |
English PDF |
| GB/T 18876.2-2006 |
Standard practice for determining the metallographical constituent and inclusion content of steels and other metals by automatic image analysis - Part 2: Determining the inclusion ratings of steels by automatic image analysis and stereology 应用自动图像分析测定钢和其它金属中金相组织、夹杂物含量和级别的标准试验方法 第2部分：钢中夹杂物级别的图像分析与体视学测定 |
China National Standards tin |
English PDF |
| GB/T 19042.5-2006 |
Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests-Imaging performances of computed tomography X-ray equipment 医用成像部门的评价及例行试验 第3-5部分：X射线计算机体层摄影设备成像性能验收试验 |
China National Standards tin |
English PDF |
| GB/T 6495.7-2006 |
Photovoltaic devices - Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device 光伏器件 第7部分：光伏器件测量过程中引起的光谱失配误差的计算 |
China National Standards tin |
English PDF |
| GB/T 1251.2-2006 |
Ergonomics - Visual danger signals - General requirements,design and testing 人类工效学 险情视觉信号 一般要求、设计和检验 |
China National Standards tin |
English PDF |
| GB/T 20551-2006 |
The evaluating specification on the HACCP certification in the slaughter of livestock and poultry 畜禽屠宰HACCP应用规范 |
China National Standards tin |
English PDF |
| GB/T 8752-2006 |
Anodizing of aluminium and its alloys - Check of continuity of thin anodic oxide coating - Copper sulphate test 铝及铝合金阳极氧化 薄阳极氧化膜连续性检验方法 硫酸铜法 |
China National Standards tin |
English PDF |
| GB/T 8647.7-2006 |
The methods for chemical analysis of nickel - Determination of arsenic,antimony,bismuth,tin and lead contents - Electrothermal atomic absorption spectrometric method 镍化学分析方法 砷、锑、铋、锡、铅量的测定 电热原子吸收光谱法 |
China National Standards tin |
English PDF |
| GB/T 8647.10-2006 |
The methods for chemical analysis of nickel - Determination of arsenic,cadmium,lead,zinc,antimony,bismuth,tin,cobalt,copper,manganese,magnesium,silicon,aluminium,iron contents - Atomic emission spectrometric method 镍化学分析方法 砷、镉、铅、锌、锑、铋、锡、钴、铜、锰、镁、硅、铝、铁量的测定 发射光谱法 |
China National Standards tin |
English PDF |
| GB/T 20510-2006 |
Indium-tin Oxide target 氧化铟锡靶材 |
China National Standards tin |
English PDF |
| GB/T 20509-2006 |
Copper and copper alloys drawing stock for the contacting materials of electric locomotives 电力机车接触材料用铜及铜合金线坯 |
China National Standards tin |
English PDF |
| GB/T 20505-2006 |
Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating - Sphere instruments 铝及铝合金阳极氧化 阳极氧化膜表面反射特性的测定 积分球法 |
China National Standards tin |
English PDF |
| GB/T 20504-2006 |
Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method 铝及铝合金阳极氧化 阳极氧化膜影像清晰度的测定 条标法 |
China National Standards tin |
English PDF |
| GB/T 20498-2006 |
Guidelines for quarantine surveillance on imported ornamental plant propagating materials 进口花卉种苗疫情监测规程 |
China National Standards tin |
English PDF |
| GB/T 20496-2006 |
Guidelines for quarantine surveillance on imported grape seedlings 进口葡萄苗木疫情监测规程 |
China National Standards tin |
English PDF |
| GB/T 20674.2-2006 |
Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Electrofusion 塑料管材和管件 聚乙烯系统熔接设备 第2部分：电熔连接 |
China National Standards tin |
English PDF |
| GB/T 20674.1-2006 |
Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1：Butt fusion 塑料管材和管件 聚乙烯系统熔接设备 第1部分：热熔对接 |
China National Standards tin |
English PDF |
| GB/T 20497-2006 |
Guidelines for quarantine surveillance on imported forage and turfgrass seeds 进口牧草草坪草疫情监测规程 |
China National Standards tin |
English PDF |
| GB 8662-2006 |
Fitting dimension between scalpel blades and handles 手术刀片和手术刀柄的配合尺寸 |
China National Standards tin |
English PDF |
| GB/T 20572-2006 |
The evaluating specification on the HACCP certification of the natural casings processing 天然肠衣生产HACCP应用规范 |
China National Standards tin |
English PDF |
| GB/T 20499-2006 |
Method for the determination of di (2-ethylhexyl) adipate migrating from polyvinyl chloride film in contact with foodstuffs 食品包装用聚氯乙烯膜中己二酸二（2－乙基）己酯迁移量的测定 |
China National Standards tin |
English PDF |
| GB/T 12206-2006 |
Testing method to determine the calorific values of town gas 城镇燃气热值和相对密度测定方法 |
China National Standards tin |
English PDF |
| GB/T 20490-2006 |
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes - Ultrasonic testing for the detection of laminar imperfections 承压无缝和焊接（埋弧焊除外）钢管分层的超声检测 |
China National Standards tin |
English PDF |
| GB/T 20473-2006 |
Dry mix thermal insulating composition for buildings 建筑保温砂浆 |
China National Standards tin |
English PDF |
| GB/T 27050.2-2006 |
Conformity assessment―Supplier’s declaration of conformity―Part 2: Supporting documentation 合格评定 供方的符合性声明 第2部分：支持性文件 |
China National Standards tin |
English PDF |
| GB/T 20623-2006 |
Emulsions for architectural coatings 建筑涂料用乳液 |
China National Standards tin |
English PDF |
| GB/T 20603-2006 |
Refrigerated light hydrocarbon fluids - Sampling of liquefied natural gas - Continuous method 冷冻轻烃流体 液化天然气的取样 连续法 |
China National Standards tin |
English PDF |
| GB/T 20477-2006 |
Methods of quarantine and identification of Solenopsis invicta Buren 红火蚁检疫鉴定方法 |
China National Standards tin |
English PDF |
| GB/T 12901-2006 |
Gum turpentine 脂松节油 |
China National Standards tin |
English PDF |
| GB/T 20487-2006 |
Urban fire-danger weather ratings 城市火险气象等级 |
China National Standards tin |
English PDF |
| GB 3906-2006 |
Alternating-current metal-enclosed switchgear and controlgear for rated voltages above 3.6 kV and up to and including 40.5 kV 3.6kV～40.5kV交流金属封闭开关设备和控制设备 |
China National Standards tin |
English PDF |
| GB 20694-2006 |
Emamectin B1 emulsifiable concentrates 甲氨基阿维菌素乳油 |
China National Standards tin |
English PDF |
| GB 20693-2006 |
Emamectin B1 technical 甲氨基阿维菌素原药 |
China National Standards tin |
English PDF |
| GB/T 1819.17-2006 |
Methods for chemical analysis of tin concentrates―Determination of mercury content―The cold vapor atomic absorption spectrometric method 锡精矿化学分析方法 汞量的测定 冷原子吸收光谱法 |
China National Standards tin |
English PDF |
| GB/T 1819.16-2006 |
Methods for chemical analysis of tin concentrates―Determination of silver content―Flame atomic absoption spectrometric method 锡精矿化学分析方法 银量的测定 火焰原子吸收光谱法 |
China National Standards tin |
English PDF |
| GB/T 1819.15-2006 |
Methods for chemical analysis of tin concentrates―Determination of fluorine content―The ion-selective electrode method 锡精矿化学分析方法 氟量的测定 离子选择电极法 |
China National Standards tin |
English PDF |
| GB/T 1819.14-2006 |
Methods for chemical analysis of tin concentrates―Determination of copper content―Flame atomic absorption spectrometric method 锡精矿化学分析方法 铜量的测定 火焰原子吸收光谱法 |
China National Standards tin |
English PDF |
| GB/T 20466-2006 |
Determination of microcystins in water 水中微囊藻毒素的测定 |
China National Standards tin |
English PDF |
| GB/T 17739.2-2006 |
Microfilming of technical drawings and technical documents - Part 2: Quality criteria and control of 35mm silver gelatin microfilms 技术图样与技术文件的缩微摄影 第2部分: 35mm银-明胶型缩微品的质量准则与检验 |
China National Standards tin |
English PDF |
| GB/T 9094-2006 |
Fluid power systems and components―Cylinders―Identification code for mounting dimensions and mounting types 液压缸气缸安装尺寸和安装型式代号 |
China National Standards tin |
English PDF |
| GB/T 8100-2006 |
Hydraulic fluid power―Pressure-reducing valves,sequence valves,unloading valves,throttle valves and check valves―Mounting surfaces 液压传动 减压阀、顺序阀、卸荷阀、节流阀和单向阀 安装面 |
China National Standards tin |
English PDF |
| GB/T 7178.9-2006 |
The operating for railway shunting―Part 9: Operating for standing wagons 铁路调车作业 第9部分：停留车作业 |
China National Standards tin |
English PDF |
| GB/T 7178.8-2006 |
The operating for railway shunting―Part 8: Operating for taking out and placing in wagons 铁路调车作业 第8部分：取送车辆作业 |
China National Standards tin |
English PDF |
| GB/T 7178.7-2006 |
The operating for railway shunting Part 7: Operating for the train detaching and attaching 铁路调车作业 第7部分：列车摘挂作业 |
China National Standards tin |
English PDF |
| GB/T 7178.6-2006 |
The operating for railway shunting―Part 6: Operating for sorting trains 铁路调车作业 第6部分：编组列车作业 |
China National Standards tin |
English PDF |
| GB/T 7178.5-2006 |
The operating for railway shunting―Part 5: Operating for the shunting neck 铁路调车作业 第5部分：平面牵出线作业 |
China National Standards tin |
English PDF |
| GB/T 7178.4-2006 |
The operating for railway shunting―Part 4: Operating for the simple hump 铁路调车作业 第4部分：简易驼峰作业 |
China National Standards tin |
English PDF |
| GB/T 7178.3-2006 |
The operating for railway shunting―Part 3: Operating for the mechanized hump 铁路调车作业 第3部分：半自动化驼峰作业 |
China National Standards tin |
English PDF |
| GB/T 7178.2-2006 |
The operating for railway shunting―Part 2: Preparing operation 铁路调车作业 第2部分：准备作业 |
China National Standards tin |
English PDF |
| GB/T 7178.1-2006 |
The operating for railway shunting―Part 1: Basic regulations 铁路调车作业 第1部分：基本规定 |
China National Standards tin |
English PDF |
| GB/T 7178.10-2006 |
The operating for railway shunting―Part 10: Operating for the auto-hump 铁路调车作业 第10部分：自动化驼峰作业 |
China National Standards tin |
English PDF |
| GB 20600-2006 |
Framing structure, Channel coding and modulation for digital television terrestrial broadcasting system 数字电视地面广播传输系统帧结构、信道编码和调制 |
China National Standards tin |
English PDF |
| GB/T 4338-2006 |
Metallic materials―Tensile testing at elevated temperature 金属材料高温拉伸试验方法 |
China National Standards tin |
English PDF |
| GB/T 13239-2006 |
Metallic materials―Tensile testing at low temperature 金属材料低温拉伸试验方法 |
China National Standards tin |
English PDF |
| GB/T 20501.5-2006 |
Guidance system for public information―Design principles and requirements of guidance elements―Part 5: Portable printing matter 公共信息导向系统 要素的设计原则与要求 第5部分：便携印刷品 |
China National Standards tin |
English PDF |
| GB/T 15806-2006 |
The methods for calculating fertilization rate of eggs of black carp ,grass carp, silver carp and bighead carp 青鱼、草鱼、鲢、鳙鱼卵受精率计算方法 |
China National Standards tin |
English PDF |
| GB/T 20439-2006 |
Graphic technology―Pregress digital data exchange―Input data for characterization of 4-colour process printing 印刷技术 印前数据交换 用于四色印刷特征描述的输入数据 |
China National Standards tin |
English PDF |
| GB/T 6133.2-2006 |
Tool chucks for flated parallel shank tools - Part 2: Connecting dimensions of chucks and designation 削平型直柄刀具夹头 第2部分: 夹头的连接尺寸和标记 |
China National Standards tin |
English PDF |
| Find out:7828Items | To Page of: First -Previous-Next -Last | [58] [59] [60] [61] [62] [63] [64] |
+86-755-25831330
