China National Standards

China tin GB Standards English PDF List


GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards;  We provide Chinese GB standards and English version GB standards  Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services.
  •  China "tin" GB Standards English PDF List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 20329-2006 Milling cutters with tenon drive - Interchangeability dimensions of the seating of the cutter on the arbors
    端键传动的铣刀和铣刀刀杆上刀座的互换尺寸
    China National Standards
    tin

    English PDF
    GB/T 20322-2006 Petroleum and natural gas industries - Reciprocating compressors
    石油及天然气工业用往复压缩机
    China National Standards
    tin

    English PDF
    GB/T 20321.2-2006 Inverter of wind and solar energy supply power system for off-grid - Part 2: Testing method
    离网型风能、太阳能发电系统用逆变器 第2部分:试验方法
    China National Standards
    tin

    English PDF
    GB/T 20317-2006 Fused Deposition Modeling machines - Testing of the accuracy
    熔融沉积快速成形机床 精度检验
    China National Standards
    tin

    English PDF
    GB/T 10893.2-2006 Compressed air dryers - Part 2: Performance ratings
    压缩空气干燥器 第2部分:性能参数
    China National Standards
    tin

    English PDF
    GB 50170-2006 Erection works of electrical installations Code of construction and acceptance of rotating electrical machines
    电气装置安装工程旋转电机施工及验收规范
    China National Standards
    tin

    English PDF
    GB/Z 20347-2006 Powered lawn,garden and horticultural equipment - Operator controls - Actuating forces,displacement,location and methods of operation
    草坪和园艺动力机械 操作者操纵机构 操纵力、位移量、操纵位置和方法
    China National Standards
    tin

    English PDF
    GB/T 20346.2-2006 Equipment for distributing fertilizers - Test methods - Part 2: Fertilizer distributors in lines
    施肥机械 试验方法 第2部分: 行间施肥机
    China National Standards
    tin

    English PDF
    GB/T 20346.1-2006 Equipment for distributing fertilizers - Test methods - Part 1: Full width fertilizer distributors
    施肥机械 试验方法 第1部分: 全幅宽施肥机
    China National Standards
    tin

    English PDF
    GB/T 20341-2006 Tractors and self-propelled machinery for agriculture and forestry - Operator Controls - Actuating forces,displacement,location and method of operation
    农林拖拉机和自走式机械 操作者操纵机构 操纵力、位移量、操纵位置和方法
    China National Standards
    tin

    English PDF
    GB/T 16857.6-2006 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features
    产品几何技术规范(GPS) 坐标测量机的验收检测和复检检测 第6部分:计算高斯拟合要素的误差的评定
    China National Standards
    tin

    English PDF
    GB 10395.15-2006 Tractors and machinery for agriculture and forestry―Technical means for ensuring safety―Part 15:Powered edgers with rigid cutting means
    农林拖拉机和机械 安全技术要求 第15部分:配刚性切割装置的动力修边机
    China National Standards
    tin

    English PDF
    GB/T 20305-2006 Calibrated round steel link lifting chains - Guidelines to proper use and maintenance
    起重用钢制圆环校准链 正确使用和维护导则
    China National Standards
    tin

    English PDF
    GB/T 7119-2006 Evaluating guide for water saving enterprises
    节水型企业评价导则
    China National Standards
    tin

    English PDF
    GB/T 12902-2006 Analytical method for turpentine
    松节油分析方法
    China National Standards
    tin

    English PDF
    GB/T 20427-2006 Height setting micrometers and riser blocks
    可调高度测微仪及其垫高块
    China National Standards
    tin

    English PDF
    GB/T 15405-2006 Thermal specifications and testing method for passive solar houses
    被动式太阳房热工技术条件和测试方法
    China National Standards
    tin

    English PDF
    GB/T 20367-2006 Sterilization of health care products - Requirement for validation and routine control of moist heat sterilization in health care facilities
    医疗保健产品灭菌 医疗保健机构湿热灭菌的确认和常规控制要求
    China National Standards
    tin

    English PDF
    GB 12475-2006 Antitoxic regulations for storage-transportation,marketing and use of pesticides
    农药贮运、销售和使用的防毒规程
    China National Standards
    tin

    English PDF
    GB 12158-2006 General guideline for preventing electrostatic accidents
    防止静电事故通用导则
    China National Standards
    tin

    English PDF
    GB/Z 20288-2006 General disassembly requirements for testing hazardous substances in electrical and electronic products
    电子电气产品中有害物质检测样品拆分通用要求
    China National Standards
    tin

    English PDF
    GB 14886-2006 Specification for setting and installation of road traffic signals
    道路交通信号灯设置与安装规范
    China National Standards
    tin

    English PDF
    GB 50281-2006 Code for construction and acceptance of foam fire extinguishing systems
    泡沫灭火系统施工及验收规范
    China National Standards
    tin

    English PDF
    GB/T 17522-2006 General requirements for micro-hydro power generating equipments
    微型水力发电设备基本技术要求
    China National Standards
    tin

    English PDF
    GB/T 20280-2006 Information security technology Testing and evaluation approaches for network vulnerability scanners
    信息安全技术 网络脆弱性扫描产品测试评价方法
    China National Standards
    tin

    English PDF
    GB/T 20272-2006 Information security technology Security techniques requirement for operating system
    信息安全技术 操作系统安全技术要求
    China National Standards
    tin

    English PDF
    GB/T 20268-2006 Specification for collecting and processing in-car navigable geographic data
    车载导航地理数据采集处理技术规程
    China National Standards
    tin

    English PDF
    GB/T 20385-2006 Textiles―Determination of organotin compounds
    纺织品 有机锡化合物的测定
    China National Standards
    tin

    English PDF
    GB/T 20365-2006 Determination method for chondroitin sulfate and glucosamine hydrochloride - Liquid chromatography method
    硫酸软骨素和盐酸氨基葡萄糖含量的测定 液相色谱法
    China National Standards
    tin

    English PDF
    GB/T 20205-2006 Micropore anti-counterfeiting marker generated by heavy ion
    重离子微孔防伪标识
    China National Standards
    tin

    English PDF
    GB/T 15102-2006 Surface decorated wood-based panels with paper impregnated thermosetting resins
    浸渍胶膜纸饰面人造板
    China National Standards
    tin

    English PDF
    GB/T 14074-2006 Testing methods for wood adhesives and their resins
    木材胶粘剂及其树脂检验方法
    China National Standards
    tin

    English PDF
    GB/T 20250-2006 Aluminum and aluminum alloys continue extruded tubes
    铝及铝合金连续挤压管
    China National Standards
    tin

    English PDF
    GB 1971-2006 Rotating electrical machines―Terminal markings and direction of rotation
    旋转电机 线端标志与旋转方向
    China National Standards
    tin

    English PDF
    GB/T 20235-2006 Technical specification for silver-tin oxide electric contact materials
    银氧化锡电触头材料技术条件
    China National Standards
    tin

    English PDF
    GB/T 10069.1-2006 Measurement of airborne noise emitted by rotating electrical machines and the noise limits Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
    旋转电机噪声测定方法及限值 第1部分:旋转电机噪声测定方法
    China National Standards
    tin

    English PDF
    GB/T 17739.5-2006 Microfilming of technical drawings and technical documents - Part 5: Test procedures for diazo duplicating of microfilm images in aperture cards
    技术图样与技术文件的缩微摄影 第5部分:开窗卡中缩微影像重氮复制的检验程序
    China National Standards
    tin

    English PDF
    GB 5135.11-2006 Automatic sprinkler system-Part 11:grooved couplings and fittings
    自动喷水灭火系统 第11部分:沟槽式管接件
    China National Standards
    tin

    English PDF
    GB/T 20224-2006 Determination of exposure index, ISO speed ratings, standard output sensitivity and recommended exposure index for digital still cameras
    数码照相机曝光指数、ISO感光度值、标准输出灵敏度和推荐曝光指数的确定
    China National Standards
    tin

    English PDF
    GB/T 20186.1-2006 Secondary coating materials used for optical fiber Part 1: Polybutylene terephthalate
    光纤用二次被覆材料 第1部分:聚对苯二甲酸丁二醇酯
    China National Standards
    tin

    English PDF
    GB/T 20185-2006 Optical interface requirements for equipments and systems relating to the synchronous digital hierarchy
    同步数字体系设备和系统的光接口技术要求
    China National Standards
    tin

    English PDF
    GB/T 10591-2006 Specifications for high temperature/low air pressure testing chambers
    高温/ 低气压试验箱技术条件
    China National Standards
    tin

    English PDF
    GB/T 10590-2006 Specifications for high and low temperature/low air pressure testing chambers
    高低温/ 低气压试验箱技术条件
    China National Standards
    tin

    English PDF
    GB/T 10588-2006 Specifications for mould growth testing chambers
    长霉试验箱技术条件
    China National Standards
    tin

    English PDF
    GB/T 10587-2006 Specifications for salt mist testing chambers
    盐雾试验箱技术条件
    China National Standards
    tin

    English PDF
    GB/T 10586-2006 Specifications for damp heat testing chambers
    湿热试验箱技术条件
    China National Standards
    tin

    English PDF
    GB/T 20220-2006 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
    塑料薄膜和薄片 样品平均厚度,卷平均厚度及单位质量面积的测定 称量法(称量厚度)
    China National Standards
    tin

    English PDF
    GB/T 19829.3-2006 Petroleum and natural gas industries - Life cycle costing - Part 3: Implementation guidelines
    石油天然气工业 寿命周期费用分析 第3部分:实施指南
    China National Standards
    tin

    English PDF
    GB 20415-2006 Rubber―Coated fabric―Isolating tape
    橡胶涂覆织物 绝缘带
    China National Standards
    tin

    English PDF
    GB/T 7899-2006 Regulators for welding, cutting and the similar processes
    焊接、切割及类似工艺用气瓶减压器
    China National Standards
    tin

    English PDF
    GB 20262-2006 Safety specifications of regulators for welding, cutting and the similar processes
    焊接、切割及类似工艺用气瓶减压器安全规范
    China National Standards
    tin

    English PDF
    GB/T 5169.19-2006 Fire hazard testing for electric and eletronic products - Part 19: Abnormal heat - Mould stress relief distortion test
    电工电子产品着火危险试验 第19部分:非正常热 模压应力释放变形试验
    China National Standards
    tin

    English PDF
    GB/T 20160-2006 Recommended Practice for Testing Insulation Resistance of Rotating Machinery
    旋转电机绝缘电阻测试
    China National Standards
    tin

    English PDF
    GB/T 17948.4-2006 Functional evaluation of insulation systems for rotating electrical machines - Test procedures for form-wound windings - Electrical evaluation of insulation sysyems used in machines up to and including 50MVA and 15kV
    旋转电机绝缘结构功能性评定 成型绕组试验规程 50MVA、15kV及以下电机绝缘结构电评定
    China National Standards
    tin

    English PDF
    GB/T 12668.4-2006 Adjustable speed electrical power drive systems - part 4: General requirements - Rating specifications for a.c. power drive systems above 1000V a.c. and not exceeding 35kV
    调速电气传动系统 第4部分:一般要求 交流电压1000V以上但不超过35kV的交流调速电气传动系统额定值的规定
    China National Standards
    tin

    English PDF
    GB/T 16263.1-2006 Information technology - ASN.1 encoding rules Part 1: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER)
    信息技术 ASN.1 编码规则 第1部分:基本编码规则(BER)、正则编码规则(CER)和非典型编码规则(DER)规范
    China National Standards
    tin

    English PDF
    GB/T 20405.5-2006 Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 5: Gravimetric determination of free swell capacity in saline solution
    失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第5部分:在生理盐水中用称重法测定吸水率
    China National Standards
    tin

    English PDF
    GB/T 20405.4-2006 Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 4: Determination of moisture content by mass loss upon heating
    失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第4部分 加热失重法对水份含量的测定
    China National Standards
    tin

    English PDF
    GB/T 20405.3-2006 Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 3: Determination of particle size distribution by sieve fractionation
    失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第3部分:筛分法对粒径分布的测定
    China National Standards
    tin

    English PDF
    GB/T 20405.2-2006 Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 2: Determination of amount of residual monomers
    失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第2部分:单体残留的测定
    China National Standards
    tin

    English PDF
    GB/T 20405.1-2006 Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 1: Determination of PH
    失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第1部分:PH值的测定
    China National Standards
    tin

    English PDF
    GB/T 20132-2006 Ships and marine technology -- Low-location lighting on passenger ships -- Arrangement
    船舶与海上技术 客船低位照明 布置
    China National Standards
    tin

    English PDF
    GB/T 1835-2006 Series 1 freight container - Corner fittings
    系列1集装箱 角件
    China National Standards
    tin

    English PDF
    GB/T 5836.2-2006 Unplasticized poly(vinyl chloride) (PVC-U) fittings for soil and waste inside buildings
    建筑排水用硬聚氯乙烯(PVC-U)管件
    China National Standards
    tin

    English PDF
    GB/T 20207.2-2006 Acrylonitrile-butadiene-styrene (ABS) pressure piping systems-Part 2: fittings
    丙烯腈-丁二烯-苯乙烯(ABS)压力管道系统 第2部分:管件
    China National Standards
    tin

    English PDF
    GB/T 20201-2006 Mechanical joint fittings for use with polyethylene pressure pipes for irrigation purposes
    灌溉用聚乙烯(PE)压力管机械连接管件
    China National Standards
    tin

    English PDF
    GB/T 15819-2006 Polyethylene (PE) pipes for irrigation laterals - Susceptibility to envionmental stress cracking induced by insert-type fittings - Test method and specification
    灌溉用聚乙烯(PE)管材由插入式管件引起环境应力开裂敏感性的试验方法和技术要求
    China National Standards
    tin

    English PDF
    GB/T 20153-2006 Classification and interpretation of new lighting products
    新型照明产品的分类与解释
    China National Standards
    tin

    English PDF
    GB/T 12168-2006 Protective covers of insulating material for live working
    带电作业用遮蔽罩
    China National Standards
    tin

    English PDF
    GB/T 4942.1-2006 Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
    旋转电机整体结构的防护等级(IP代码)-分级
    China National Standards
    tin

    English PDF
    GB/T 4157-2006 Laboratory testing of metals for resistance to specific forms of environmental cracking in H2S environments
    金属在硫化氢环境中抗特殊形式环境开裂实验室试验
    China National Standards
    tin

    English PDF
    GB/T 20127.13-2006 Steel and alloy - Determination of trace element contents Part 13: Determination of tin content by iodide extraction-phenylfluorone photometric method
    钢铁及合金 痕量元素的测定 第13部分:碘化物萃取-苯基荧光酮光度法测定锡含量
    China National Standards
    tin

    English PDF
    GB/T 20126-2006 Unalloyed steel -- Determination of low carbon content -- Part 2: Infrared absorption method after combustion in an induction furnace (with preheating)
    非合金钢 低碳含量的测定 第2部分:感应炉(经预加热)内燃烧后红外吸收法
    China National Standards
    tin

    English PDF
    GB/T 20124-2006 Steel and iron -- Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas (Routine method)
    钢铁 氮含量的测定 惰性气体熔融热导法(常规方法)
    China National Standards
    tin

    English PDF
    GB/T 20123-2006 Steel and iron -- Determination of total carbon and sulfur content -- Infrared absorption method after combustion in an induction furnace (routine method)
    钢铁 总碳硫含量的测定 高频感应炉燃烧后红外吸收法(常规方法)
    China National Standards
    tin

    English PDF
    GB/T 20120.2-2006 Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 2: Crack propagation testing using precracked specimens
    金属和合金的腐蚀 腐蚀疲劳试验 第2部分:预裂纹试验裂纹扩展试验
    China National Standards
    tin

    English PDF
    GB/T 20120.1-2006 Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing
    金属和合金的腐蚀 腐蚀疲劳试验 第1部分:循环失效试验
    China National Standards
    tin

    English PDF
    GB/T 11261-2006 Steel and iron Determination of oxygen content The pulse heating inert gas fusion-infra-red absorption method
    钢铁 氧含量的测定 脉冲加热惰气熔融-红外线吸收法
    China National Standards
    tin

    English PDF
    GB 50370-2005 Code for design of gas fire extinguishing systems
    气体灭火系统设计规范
    China National Standards
    tin

    English PDF
    GB 20128-2006 Inert fire extinguishing agent
    惰性气体灭火剂
    China National Standards
    tin

    English PDF
    GB 16670-2006 Cabinet gas fire extinguishing equipment
    柜式气体灭火装置
    China National Standards
    tin

    English PDF
    GB/T 20204-2006 General testing specification of automatic system equipment for water resources and hydrology
    水利水文自动化系统设备检验测试通用技术规范
    China National Standards
    tin

    English PDF
    GB/T 20095-2006 Assessment code for performance of solar water heating systems
    太阳热水系统性能评定规范
    China National Standards
    tin

    English PDF
    GB/T 20110-2006 Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection,analysis and data reporting
    液压传动 零件和元件的清洁度 与污染物的收集、分析和数据报告相关的检验文件和准则
    China National Standards
    tin

    English PDF
    GB/T 20106-2006 General principles of stipulating the assessment indicator frame of cleaner production for industries
    工业清洁生产评价指标体系编制通则
    China National Standards
    tin

    English PDF
    GB/T 2423.55-2006 Environmental testing for electric and electronic products - Part 2: Test methods - Test Eh: Hammer tests
    电工电子产品环境试验 第2部分: 环境测试 试验Eh:锤击试验
    China National Standards
    tin

    English PDF
    GB/T 17948.3-2006 Functional evaluation of insulation systems for rotating electrical machines - Test procedures for form-wound windings - Thermal evaluation and classification of insulation sysyems used in machines up to and including 50MVA and 15kV
    旋转电机绝缘结构功能性评定 成型绕组试验规程 50MVA、15kV及以下电机绝缘结构热评定和分级
    China National Standards
    tin

    English PDF
    GB/T 17948.2-2006 Functional evaluation of insulation systems for rotating electrical machines - Test procedures for wire-wound windings - Classification of changes and insulation component substitutions
    旋转电机绝缘结构功能性评定 散绕绕组试验规程 变更和绝缘组分替代的分级
    China National Standards
    tin

    English PDF
    GB/T 1410-2006 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
    固体绝缘材料体积电阻率和表面电阻率试验方法
    China National Standards
    tin

    English PDF
    GB/T 1409-2006 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including meter wavelengths
    测量电气绝缘材料在工频、音频、高频(包括米波波长在内)下电容率和介质损耗因数的推荐方法
    China National Standards
    tin

    English PDF
    GB/T 10581-2006 Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures
    绝缘材料在高温下电阻和电阻率的试验方法
    China National Standards
    tin

    English PDF
    GB/T 10064-2006 Methods of test for the determination of the insulation resistance of solid insulating materials
    测定固体绝缘材料绝缘电阻的试验方法
    China National Standards
    tin

    English PDF
    GB/T 3871.4-2006 Agricultural tractors - Test procedures - Part 4: Rear three-point linkage lifting capacity
    农业拖拉机 试验规程 第4部分:后置三点悬挂装置提升能力
    China National Standards
    tin

    English PDF
    GB/T 3871.10-2006 Agricultural tractors - Test procedures - Part 10: Low temperature starting
    农业拖拉机 试验规程 第10部分:低温起动
    China National Standards
    tin

    English PDF
    GB/T 8243.6-2006 Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test
    内燃机全流式机油滤清器试验方法 第6部分:静压耐破度试验
    China National Standards
    tin

    English PDF
    GB/T 8243.5-2006 Methods of test for full-flow lubricating oil filters for internal combustion engines -Part 5: Cold start simulation and hydraulic pulse durability test
    内燃机全流式机油滤清器试验方法 第5部分:冷起动模拟和液压脉冲耐久试验
    China National Standards
    tin

    English PDF
    GB/T 20064.2-2006 Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement
    往复式内燃机 手柄起动装置 第2部分:脱开角试验方法
    China National Standards
    tin

    English PDF
    GB/T 20064.1-2006 Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests
    往复式内燃机 手柄起动装置 第1部分:安全要求和试验
    China National Standards
    tin

    English PDF
    GB/T 20063.12-2006 Graphical symbols for diagrams -Part 12: Devices for separating purification and mixing
    简图用图形符号 第12部分:分离、净化和混合的装置
    China National Standards
    tin

    English PDF
    GB/T 9061-2006 General specifications for metal-cutting machine tools
    金属切削机床 通用技术条件
    China National Standards
    tin

    English PDF

    Find out:7828Items   |  To Page of: First -Previous-Next -Last  | [59] [60] [61] [62] [63] [64] [65]

     

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.gbstandards.org

    China National Standards