Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/Z 44002-2024 |
Space environment - Methods for determining solar energy proton Injection and peak flux 空间环境-太阳能量质子注量和峰值通量的确定方法 |
China National Standards Injection |
 English PDF |
| GB/T 43034.3-2023 |
Integrated circuits - Measurement of pulse immunity - Part 3: Non-synchronous transient Injection method 集成电路 脉冲抗扰度测量 第3部分：非同步瞬态注入法 |
China National Standards Injection |
English PDF |
| GB/T 30200-2023 |
Energy consumption detection method of rubber plastic Injection molding machine 橡胶塑料注射成型机能耗检测方法 |
China National Standards Injection |
English PDF |
| GB/T 8152.11-2023 |
Methods for chemical analysis of lead concentrates - Part 11: Determination of mercury content - Atomic fluorescence spectrometry and solid Injection direct method 铅精矿化学分析方法 第11部分：汞含量的测定 原子荧光光谱法和固体进样直接法 |
China National Standards Injection |
English PDF |
| GB/T 22530-2022 |
Safety requirements for rubber and plastic Injection molding machines 橡胶塑料注射成型机安全要求 |
China National Standards Injection |
English PDF |
| GB/T 14233.1-2022 |
Test methods for medical infusion, blood transfusion and Injection equipment - Part 1: Chemical analysis methods 医用输液、输血、注射器具检验方法 第1部分：化学分析方法 |
China National Standards Injection |
English PDF |
| GB/T 41770-2022 |
Test method of liquid fuel Injection characteristics based on backlight imaging technology 基于背光成像技术的液体燃料喷射特性测试方法 |
China National Standards Injection |
English PDF |
| GB/T 41674.1-2022 |
Radio frequency identification of animals - Standardization of Injection sites for different animal species - Part 1: Companion animals (cats and dogs) 动物射频识别 不同动物物种用注射部位的标准化 第1部分：伴侣动物（猫和狗） |
China National Standards Injection |
English PDF |
| GB/T 5264-2022 |
Diesel engine fuel Injection pump plunger couple technical specification 柴油机喷油泵柱塞偶件 技术条件 |
China National Standards Injection |
English PDF |
| GB/T 18512-2022 |
Commercial Coal Quality Blast Furnace Injection Coal 商品煤质量 高炉喷吹用煤 |
China National Standards Injection |
English PDF |
| GB/T 5095.2303-2021 |
Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 23-3:Screening and filtering tests—Test 23c：Shielding effectiveness of connectors and accessories—Line Injection method 电子设备用机电元件 基本试验规程及测量方法 第23-3部分：屏蔽和滤波试验 试验23c：连接器和附件的屏蔽效果 线注入法 |
China National Standards Injection |
English PDF |
| GB/T 41102-2021 |
General technical requirements for Injection moulding system for PET preform in packaging field 包装PET瓶坯注塑成型模具系统通用技术要求 |
China National Standards Injection |
English PDF |
| GB/T 39164-2020 |
Tools for moulding—Thermal insulating sheets for Injection moulds 成型模 注射模隔热板 |
China National Standards Injection |
English PDF |
| GB/T 38981-2020 |
Sintered-metal Injection-moulded materials—Specifications 烧结金属注射成形材料 规范 |
China National Standards Injection |
English PDF |
| GB/T 5770-2020 |
Jerk fuel Injection pump for diesel engine—Specifications 柴油机柱塞式喷油泵总成 技术条件 |
China National Standards Injection |
English PDF |
| GB/T 25156-2020 |
General specifications and inspection methods of rubber and plastics Injection moulding machines 橡胶塑料注射成型机通用技术要求及检测方法 |
China National Standards Injection |
English PDF |
| GB/T 38533-2020 |
Injection moulding machines for rubber and plastics—Mould fixing and connection dimensions 橡胶塑料注射成型机 模具固定和联接尺寸 |
China National Standards Injection |
English PDF |
| GB/T 33014.7-2020 |
Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 7:Direct radio frequency power Injection 道路车辆 电气/电子部件对窄带辐射电磁能的抗扰性试验方法 第7部分：射频功率直接注入法 |
China National Standards Injection |
English PDF |
| GB/T 17037.5-2020 |
Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy 塑料 热塑性塑料材料注塑试样的制备 第5部分：各向异性评估用标准试样的制备 |
China National Standards Injection |
English PDF |
| GB/T 17037.2-2020 |
Plastics—Injection moulding of test specimens of thermoplastic materials—Part 2:Small tensile bars 塑料 热塑性塑料材料注塑试样的制备 第2部分：小拉伸试样 |
China National Standards Injection |
English PDF |
| GB/T 39483.2-2020 |
Rubber and plastics Injection moulding machine—Interface—Part 2:Data exchange interface 橡胶塑料注射成型机 接口 第2部分：数据交换接口 |
China National Standards Injection |
English PDF |
| GB/T 39483.1-2020 |
Rubber and plastics Injection moulding machine—Interface —Part 1: Mechanical and electrical interface 橡胶塑料注射成型机 接口 第1部分：机械和电气接口 |
China National Standards Injection |
English PDF |
| GB/T 17037.1-2019 |
Plastics-Injection moulding of test specimens of thermoplastic materials-Part 1:General principles,and moulding of multipurpose and bar test specimens 塑料 热塑性塑料材料注塑试样的制备 第1部分：一般原理及多用途试样和长条形试样的制备 |
China National Standards Injection |
English PDF |
| GB/T 34339-2017 |
Ammonia Injection and mixing system in coal-fired flue gas denitration system 燃煤烟气脱硝喷氨混合系统 |
China National Standards Injection |
English PDF |
| GB/T 33361-2016 |
Desulphurization Injection lance of hot metal 铁水脱硫喷枪 |
China National Standards Injection |
English PDF |
| GB/T 33468-2016 |
Automatic one stage Injection stretch and blow molding machine 全自动一步法注拉吹成型机 |
China National Standards Injection |
English PDF |
| GB/T 33014.4-2016 |
Road vehicles—Component test methods for electrical/electronic disturbances from narrowband radiated electromagnetic energy—Part 4: Bulk current Injection (BCI) 道路车辆 电气/电子部件对窄带辐射电磁能的抗扰性试验方法 第4部分：大电流注入（BCI）法 |
China National Standards Injection |
English PDF |
| GB/T 33012.4-2016 |
Road vehicles—Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy—Part 4: Bulk current Injection(BCI) 道路车辆 车辆对窄带辐射电磁能的抗扰性试验方法 第4部分：大电流注入法 |
China National Standards Injection |
English PDF |
| GB/T 32664-2016 |
Tools for moulding—Tool specification sheet for Injection moulds 成型模 注射模订货技术规范 |
China National Standards Injection |
English PDF |
| GB/T 32515-2016 |
Variable-frequency drive for Injection molding machine 注塑机专用变频调速设备 |
China National Standards Injection |
English PDF |
| GB/T 32475-2016 |
Rubber hose and hose assemblies for coal seam water Injection,gas drainage and drilling plugging 煤层注水、钻孔封堵及瓦斯排放橡胶软管和软管组合件 |
China National Standards Injection |
English PDF |
| GB/T 31723.406-2015 |
Metallic communication cable test methods—Part 4-6: Electromagnetic compatibility (EMC)—Surface transfer impedance—Line Injection method 金属通信电缆试验方法 第4-6部分：电磁兼容 表面转移阻抗 线注入法 |
China National Standards Injection |
English PDF |
| GB 50391-2014 |
Code for design of oilfield water Injection engineering 油田注水工程设计规范 |
China National Standards Injection |
English PDF |
| GB/T 5275.4-2014 |
Gas analysis—Preparation of calibration gas mixtures using dynamic volumetric methods—Part 4: Continuous syringe Injection method 气体分析 动态体积法制备校准用混合气体 第4部分：连续注射法 |
China National Standards Injection |
English PDF |
| GB/T 30200-2013 |
Test method for energy consumption of rubber and plastics Injection moulding machines 橡胶塑料注射成型机能耗检测方法 |
China National Standards Injection |
English PDF |
| GB/T 27797.11-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates 纤维增强塑料 试验板制备方法 第11部分：BMC和其他长纤维模塑料注射模塑 小方片 |
China National Standards Injection |
English PDF |
| GB/T 27797.10-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens 纤维增强塑料 试验板制备方法 第10部分：BMC和其他长纤维模塑料注射模塑 一般原理和通用试样模塑 |
China National Standards Injection |
English PDF |
| GB/T 5771-2010 |
Delivery valve of diesel fuel Injection pump - Specifications 柴油机喷油泵出油阀偶件 技术条件 |
China National Standards Injection |
English PDF |
| GB/T 5264-2010 |
plunger of diesel fuel Injection pump - Specifications 柴油机喷油泵柱塞偶件 技术条件 |
China National Standards Injection |
English PDF |
| GB/T 25368-2010 |
Electronic control common rail fuel Injection system for diesel engines - The high-pressure supply pump - Specifications 柴油机电控共轨喷油系统高压供油泵总成 技术条件 |
China National Standards Injection |
English PDF |
| GB/T 25367-2010 |
Electronic control common rail fuel Injection system for diesel engines - The injector - Specifications 柴油机电控共轨喷油系统喷油器总成 技术条件 |
China National Standards Injection |
English PDF |
| GB/T 25366-2010 |
Electronic control common rail fuel Injection system for diesel engines - The rail - Specifications 柴油机电控共轨喷油系统共轨管总成 技术条件 |
China National Standards Injection |
English PDF |
| GB/T 25365.1-2010 |
Electronic control common rail fuel Injection system for diesel engines - Specifications - Part 1: Machinery 柴油机电控共轨喷油系统总成 技术条件 第1部分：机械 |
China National Standards Injection |
English PDF |
| GB/T 25157-2010 |
Inspections methods of Injection moulding machines for rubber and plastics 橡胶塑料注射成型机检测方法 |
China National Standards Injection |
English PDF |
| GB/T 25156-2010 |
General specifications of Injection moulding machines for rubber and plastics 橡胶塑料注射成型机通用技术条件 |
China National Standards Injection |
English PDF |
| GB/T 8029-2010 |
Calibration fluid for diesel Injection pump 柴油机喷油泵校泵油 |
China National Standards Injection |
English PDF |
| GB 50607-2010 |
Design regulations of pulverized coal Injection for blast furnace 高炉喷吹煤粉工程设计规范 |
China National Standards Injection |
English PDF |
| GB/T 24504-2009 |
The method of Injection/falloff well test for coalbed methane well 煤层气井注入/压降试井方法 |
China National Standards Injection |
English PDF |
| GB/T 23435-2009 |
Cleaning fluids for electronic fuel Injection automobile nozzle 电喷汽车喷油嘴清洗液 |
China National Standards Injection |
English PDF |
| GB 22530-2008 |
Safety requirements of Injection moulding machines for rubber and plastics 橡胶塑料注射成型机安全要求 |
China National Standards Injection |
English PDF |
| GB/T 10826.5-2008 |
Fuel Injection equipment - Vocabulary - Part 5: Common rail fuel injection system 燃油喷射装置 词汇 第5部分：共轨式燃油喷射系统 |
China National Standards Injection |
English PDF |
| GB/T 10826.4-2008 |
Fuel Injection equipment - Vocabulary - Part 4: High-pressure pipes and end-connections 燃油喷射装置 词汇 第4部分：高压油管和管端连接件 |
China National Standards Injection |
English PDF |
| GB/T 10826.3-2008 |
Fuel Injection equipment - Vocabulary - Part 3: Unit injectors 燃油喷射装置 词汇 第3部分：泵喷嘴 |
China National Standards Injection |
English PDF |
| GB/T 10826.2-2008 |
Fuel Injection equipment - Vocabulary - Part 2: Fuel injectors 燃油喷射装置 词汇 第2部分：喷油器 |
China National Standards Injection |
English PDF |
| GB/T 14233.1-2008 |
Test methods for infusion, transfusion, Injection equipments for medical use - Part 1: Chemical analysis methods 医用输液、输血、注射器具检验方法 第1部分：化学分析方法 |
China National Standards Injection |
English PDF |
| GB/T 18512-2008 |
Specifications of coal used in pulverized coal Injection (PCI) 高炉喷吹用煤技术条件 |
China National Standards Injection |
English PDF |
| GB/T 21709.6-2008 |
Standardized manipulations of acupuncture and moxibustion - Part 6: Point Injection 针灸技术操作规范 第6部分 穴位注射 |
China National Standards Injection |
English PDF |
| GB 16543-2008 |
Safety regulations for explosion prevention and protection on bituminous coal Injection system into blast furnace 高炉喷吹烟煤系统防爆安全规程 |
China National Standards Injection |
English PDF |
| GB/T 5770-2008 |
Technical requirements for jerk fuel Injection pump 柴油机柱塞式喷油泵总成 技术条件 |
China National Standards Injection |
English PDF |
| GB/T 14096-2008 |
Testing method for fuel Injection pump test-stand 喷油泵试验台 试验方法 |
China National Standards Injection |
English PDF |
| GB/T 10826.1-2007 |
Fuel Injection equipment - Vocabulary - Part 1：Fuel injection pump 燃油喷射装置 词汇 第1部分：喷油泵 |
China National Standards Injection |
English PDF |
| GB/T 4170-2006 |
Specification of components of Injection moulds for plastics 塑料注射模零件技术条件 |
China National Standards Injection |
English PDF |
| GB/T 4169.9-2006 |
Components of Injection moulds for plastics - Part 9: Stop pin 塑料注射模零件 第9部分：限位钉 |
China National Standards Injection |
English PDF |
| GB/T 4169.8-2006 |
Components of Injection moulds for plastics ― Part 8:Mould plate 塑料注射模零件 第8部分：模板 |
China National Standards Injection |
English PDF |
| GB/T 4169.7-2006 |
Components of Injection moulds for plastics - Part 7: Ejector plate 塑料注射模零件 第7部分：推板 |
China National Standards Injection |
English PDF |
| GB/T 4169.6-2006 |
Components of Injection moulds for plastics - Part 6: Spacer block 塑料注射模零件 第6部分：垫块 |
China National Standards Injection |
English PDF |
| GB/T 4169.5-2006 |
Components of Injection moulds for plastics - Part 5: Shouldered guide pillar 塑料注射模零件 第5部分：带肩导柱 |
China National Standards Injection |
English PDF |
| GB/T 4169.4-2006 |
Components of Injection moulds for plastics - Part 4: Headed guide pillar 塑料注射模零件 第4部分：带头导柱 |
China National Standards Injection |
English PDF |
| GB/T 4169.3-2006 |
Components of Injection moulds for plastics - Part 3: Headed guide bush 塑料注射模零件 第3部分：带头导套 |
China National Standards Injection |
English PDF |
| GB/T 4169.23-2006 |
Components of Injection moulds for plastics - Part 23: Rectangular mould opening delayer 塑料注射模零件 第23部分:矩形拉模扣 |
China National Standards Injection |
English PDF |
| GB/T 4169.22-2006 |
Components of Injection moulds for plastics - Part 22: Round mould opening delayer 塑料注射模零件 第22部分: 圆形拉模扣 |
China National Standards Injection |
English PDF |
| GB/T 4169.2-2006 |
Components of Injection moulds for plastics - Part 2: Straight guide bush 塑料注射模零件 第2部分：直导套 |
China National Standards Injection |
English PDF |
| GB/T 4169.21-2006 |
Components of Injection moulds for plastics - Part 21: Rectangular locating element 塑料注射模零件 第21部分:矩形定位元件 |
China National Standards Injection |
English PDF |
| GB/T 4169.20-2006 |
Components of Injection moulds for plastics - Part 20: Limit pin 塑料注射模零件 第20部分:拉杆导柱 |
China National Standards Injection |
English PDF |
| GB/T 4169.19-2006 |
Components of Injection moulds for plastics - Part 19: Sprue bush 塑料注射模零件 第19部分:浇口套 |
China National Standards Injection |
English PDF |
| GB/T 4169.18-2006 |
Components of Injection moulds for plastics - Part 18: Locating ring 塑料注射模零件 第18部分:定位圈 |
China National Standards Injection |
English PDF |
| GB/T 4169.17-2006 |
Components of Injection moulds for plastics - Part 17: Ejector sleeve 塑料注射模零件 第17部分:推管 |
China National Standards Injection |
English PDF |
| GB/T 4169.16-2006 |
Components of Injection moulds for plastics - Part 16: Shouldered ejector pin 塑料注射模零件 第16部分: 带肩推杆 |
China National Standards Injection |
English PDF |
| GB/T 4169.15-2006 |
Components of Injection moulds for plastics - Part 15: Flat ejector pin 塑料注射模零件 第15部分: 扁推杆 |
China National Standards Injection |
English PDF |
| GB/T 4169.14-2006 |
Components of Injection moulds for plastics - Part 14: Ejector guide pillar 塑料注射模零件 第14部分：推板导柱 |
China National Standards Injection |
English PDF |
| GB/T 4169.13-2006 |
Components of Injection moulds for plastics ― Part 13: Return pin 塑料注射模零件 第13部分：复位杆 |
China National Standards Injection |
English PDF |
| GB/T 4169.12-2006 |
Components of Injection moulds for plastics - Part 12: Ejector guide bush 塑料注射模零件 第12部分：推板导套 |
China National Standards Injection |
English PDF |
| GB/T 4169.1-2006 |
Components of Injection moulds for plastics - Part 1: Ejector pin 塑料注射模零件 第1部分：推杆 |
China National Standards Injection |
English PDF |
| GB/T 4169.11-2006 |
Components of Injection moulds for plastics - Part 11: Round locating element 塑料注射模零件 第11部分：圆形定位元件 |
China National Standards Injection |
English PDF |
| GB/T 4169.10-2006 |
Components of Injection moulds for plastics - Part 10: Support pillar 塑料注射模零件 第10部分：支承柱 |
China National Standards Injection |
English PDF |
| GB/T 12556-2006 |
Specification of Injection mould bases for plastics 塑料注射模模架技术条件 |
China National Standards Injection |
English PDF |
| GB/T 12555-2006 |
Injection mould bases for plastics 塑料注射模模架 |
China National Standards Injection |
English PDF |
| GB/T 12554-2006 |
Specifiication of Injection moulds for plastics 塑料注射模技术条件 |
China National Standards Injection |
English PDF |
| GB/T 14233.2-2005 |
Infusion,transfusion,Injection equipment for medical use -- Part 2: Biological test methods 医用输液、输血、注射器具检验方法 第2部分：生物学试验方法 |
China National Standards Injection |
English PDF |
| GB/T 17037.4-2003 |
Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage 塑料 热塑性塑料材料注塑试样的制备 第4部分: 模塑收缩率的测定 |
China National Standards Injection |
English PDF |
| GB/T 17037.3-2003 |
Plastics--Injection moulding of test specimens of thermoplastic materials--Part 3: Small plates 塑料 热塑性塑料材料注塑试样的制备 第3部分: 小方试片 |
China National Standards Injection |
English PDF |
| GB/T 8803-2001 |
Injection-moulded unplasticized poly(vinyl chloride)(PVC-U)，chlorinated poly(vinyl chloride)(PVC-C)，acrylonitrile butadiene-styrene(ABS)and acrylonitrile-styrene-acrylester(ASA)fittings--Hot oven test method 注射成型硬质聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)、丙烯腈-丁二烯-苯乙烯三元共聚物(ABS)和丙烯腈-苯乙烯-丙烯酸盐三元共聚物(ASA)管件 热烘箱试验方法 |
China National Standards Injection |
English PDF |
| GB/T 17037.1-1997 |
Injection moulding of test specimens of thermoplastic materials--Part 1:General principles and moulding of multipurpose and bar test specimens 热塑性塑料材料注塑试样的制备 第1部分:一般原理及多用途试样和长条试样的制备 |
China National Standards Injection |
English PDF |
| GB/T 16570-1996 |
Motor vehicles--Cradle-mounted in-line fuel Injection pumps for diesel engines--Mounting dimensions 汽车柴油机架装直列式喷油泵 安装尺寸 |
China National Standards Injection |
English PDF |
| GB/T 16098-1995 |
Workplace air--Determination of acrylonitrile--Direct Injection gas chromatographic method 车间空气中丙烯腈的直接进样气相色谱测定方法 |
China National Standards Injection |
English PDF |
| GB/T 16095-1995 |
Workplace air--Determination of acetonitrile--Direct Injection gas chromatographic method 车间空气中乙腈的直接进样气相色谱测定方法 |
China National Standards Injection |
English PDF |
| GB/T 16094-1995 |
Workplace air--Determination of tetrafluoroethylene--Direct Injection gas chromatographic method 车间空气中四氟乙烯的直接进样气相色谱测定方法 |
China National Standards Injection |
English PDF |
| GB/T 16091-1995 |
Workplace air--Determination of chloroprene--Direct Injection gas chromatographic method 车间空气中氯丁二烯的直接进样气相色谱测定方法 |
China National Standards Injection |
English PDF |
| GB/T 16090-1995 |
Workplace air--Determination of allyl chloride--Direct Injection gas chromatographic method 车间空气中氯丙烯的直接进样气相色谱测定方法 |
China National Standards Injection |
English PDF |
| GB/T 16088-1995 |
Workplace air--Determination of vinyl chloride--Direct Injection gas chromatographic method (PEG 6000) 车间空气中氯乙烯的直接进样气相色谱测定方法 (PEG 6000) |
China National Standards Injection |
English PDF |
| Find out:129Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
