China National Standards

China C GB Standards English PDF List


GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards;  We provide Chinese GB standards and English version GB standards  Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services.
  •  China "C" GB Standards English PDF List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 14384-2010 Woodworking maChines - General specifications
    木工机床 通用技术条件
    China National Standards
    C

    English PDF
    GB/T 8118-2010 The general speCification for arc welding machines
    电弧焊机通用技术条件
    China National Standards
    C

    English PDF
    GB/T 757-2010 Conical shaft extension for rotating electrical machines
    旋转电机 圆锥形轴伸
    China National Standards
    C

    English PDF
    GB/T 756-2010 Cylindrical shaft extension for rotating electrical machines
    旋转电机 圆柱形轴伸
    China National Standards
    C

    English PDF
    GB/Z 25320.4-2010 Power systems management and assoCiated information exchange - Data and communications security - Part 4: Profiles including MMS
    电力系统管理及其信息交换 数据和通信安全 第4部分:包含MMS的协议集
    China National Standards
    C

    English PDF
    GB/Z 25320.3-2010 Power systems management and assoCiated information exchange - Data and communications security - Part 3: Communication network and system security -Profiles including TCP/IP
    电力系统管理及其信息交换 数据和通信安全 第3部分:通信网络和系统安全 包含TCP/IP的协议集
    China National Standards
    C

    English PDF
    GB/Z 25320.1-2010 Power systems management and assoCiated information exchange - Data and communications security - Part 1: Communication network and system security -Introduction to security issues
    电力系统管理及其信息交换 数据和通信安全 第1部分:通信网络和系统安全 安全问题介绍
    China National Standards
    C

    English PDF
    GB/T 4960.7-2010 Glossary of terms for nuClear science and technology Part 7: Nuclear materials control and safeguards
    核科学技术术语 第7部分:核材料管制与核保障
    China National Standards
    C

    English PDF
    GB/T 4960.3-2010 Glossary of terms - nuClear science and technology - Part 3: Nuclear fuel and nuclear fuel cycle
    核科学技术术语 第3部分:核燃料与核燃料循环
    China National Standards
    C

    English PDF
    GB/T 4960.1-2010 Glossary of terms - nuClear science and technology - part 1: Nuclear physics and nuclear chemistry
    核科学技术术语 第1部分:核物理与核化学
    China National Standards
    C

    English PDF
    GB/T 311.4-2010 Insulation Co-ordination - Part 4: Computational guide to insulation Co-ordination and modeling of electrical networks
    绝缘配合 第4部分:电网绝缘配合及其模拟的计算导则
    China National Standards
    C

    English PDF
    GB/T 27320-2010 Food defense plan and guidelines for its appliCation - Food processing establishments
    食品防护计划及其应用指南 食品生产企业
    China National Standards
    C

    English PDF
    GB/T 25457-2010 Piano pin bloCk
    钢琴弦轴板
    China National Standards
    C

    English PDF
    GB/T 25455-2010 EleCtrophones musical instruments playback equipment - Specification of assessment for musical performance
    电鸣乐器放音设备 设备音乐性能评价规范
    China National Standards
    C

    English PDF
    GB/T 25454-2010 General speCification for equalization equipment of electrophones musical instruments
    电鸣乐器均衡类音效装置通用技术条件
    China National Standards
    C

    English PDF
    GB/T 25453-2010 SpeCification for natural uranium dioxide powder for PHWR plant
    重水堆核电厂燃料元件用天然二氧化铀粉末技术条件
    China National Standards
    C

    English PDF
    GB/T 25452-2010 SpeCification for sintered natural uranium dioxide pellets for PHWR plant
    重水堆核电厂燃料元件用烧结天然二氧化铀芯块技术条件
    China National Standards
    C

    English PDF
    GB/T 25451-2010 PHWR fuel element Coating-measurement of thickness-beta backscatter method
    重水堆核电厂燃料元件涂层厚度测量β射线背散射法
    China National Standards
    C

    English PDF
    GB/T 25450-2010 Eddy Current testing of fuel element end cap weld for PHWR
    重水堆核电厂燃料元件端塞焊缝涡流检测
    China National Standards
    C

    English PDF
    GB/T 25449-2010 SpeCification for fuel bundles of PHWR plant
    重水堆核电厂燃料棒束技术条件
    China National Standards
    C

    English PDF
    GB/T 25448-2010 Helium leak testing of PHWR nuClear fuel bundles
    重水堆核电厂燃料棒束氦质谱泄漏检测
    China National Standards
    C

    English PDF
    GB/T 25447-2010 Proton exChange membrane fuel cell test system and activation system
    质子交换膜燃料电池测试台及活化台
    China National Standards
    C

    English PDF
    GB/T 25446-2010 SpeCification and technical requirements for oil-immersed amorphous alloy core distribution transformers
    油浸式非晶合金铁心配电变压器技术参数和要求
    China National Standards
    C

    English PDF
    GB/T 25444.7-2010 Mobile and fixed offshore units - EleCtrical installations - Part 7: Hazardous areas
    移动式和固定式近海设施 电气装置 第7部分:危险区域
    China National Standards
    C

    English PDF
    GB/T 25444.6-2010 Mobile and fixed offshore units - EleCtrical installations - Part 6: Installation
    移动式和固定式近海设施 电气装置 第6部分:安装
    China National Standards
    C

    English PDF
    GB/T 25444.5-2010 Mobile and fixed offshore units - EleCtrical installations - Part 5: Mobile units
    移动式和固定式近海设施 电气装置 第5部分:移动设施
    China National Standards
    C

    English PDF
    GB/T 25444.3-2010 Mobile and fixed offshore units - EleCtrical installations - Part 3: Equipment
    移动式和固定式近海设施 电气装置 第3部分:设备
    China National Standards
    C

    English PDF
    GB/T 25444.2-2010 Mobile and fixed offshore units - EleCtrical installations - Part 2: System design
    移动式和固定式近海设施 电气装置 第2部分:系统设计
    China National Standards
    C

    English PDF
    GB/T 25443-2010 Portable spot welding maChines
    移动式点焊机
    China National Standards
    C

    English PDF
    GB/T 25442-2010 Standard methods for determining losses and effiCiency of rotating electrical machines from tests(excluding machines for traction vehicles)
    旋转电机(牵引电机除外)确定损耗和效率的试验方法
    China National Standards
    C

    English PDF
    GB/T 25441-2010 The motors for vaCuum cleaners
    吸尘器电机
    China National Standards
    C

    English PDF
    GB/T 25440.4-2010 Retrieval and analysis of surgiCal implants - Part 4: Analysis of retrieved ceramic surgical implants
    外科植入物的取出与分析 第4部分:取出陶瓷外科植入物的分析
    China National Standards
    C

    English PDF
    GB/T 25440.3-2010 Retrieval and analysis of surgiCal implants - Part 3: Analysis of retrieved polymeric surgical implants
    外科植入物的取出与分析 第3部分:取出聚合物外科植入物的分析
    China National Standards
    C

    English PDF
    GB/T 25440.2-2010 Retrieval and analysis of surgiCal implants - Part 2: Analysis of retrieved metallic surgical implants
    外科植入物的取出与分析 第2部分:取出金属外科植入物的分析
    China National Standards
    C

    English PDF
    GB/T 25440.1-2010 Retrieval and analysis of surgiCal implants - Part 1: Retrieval and handling
    外科植入物的取出与分析 第1部分:取出与处理
    China National Standards
    C

    English PDF
    GB/T 25439-2010 Standard method for using Cellulose triacetate dosimetry system to measure absorbed dose
    使用三醋酸纤维素剂量测量系统测量吸收剂量的标准方法
    China National Standards
    C

    English PDF
    GB/T 25438-2010 SpeCification and technical requirements for three-phase oil-immersed tridimensional toroidal-core distribution transformers
    三相油浸式立体卷铁心配电变压器技术参数和要求
    China National Standards
    C

    English PDF
    GB/T 25437-2010 Coarse filtration board
    支撑过滤纸板
    China National Standards
    C

    English PDF
    GB/T 25345-2010 Metal deteCtor for food
    食品金属探测器
    China National Standards
    C

    English PDF
    GB/T 25322-2010 Safety label of Consumer product
    消费品安全标签
    China National Standards
    C

    English PDF
    GB/T 25321-2010 Guidelines for manufaCture management of safer consumer products
    消费品安全制造管理指南
    China National Standards
    C

    English PDF
    GB/T 25319-2010 Fuel Cell power system used for motor vehicles - Technical specification
    汽车用燃料电池发电系统 技术条件
    China National Standards
    C

    English PDF
    GB/T 25318-2010 LoCking devices for ball and socket couplings of string insulator units:Dimensions and tests.
    绝缘子串元件球窝联接用锁紧销:尺寸和试验
    China National Standards
    C

    English PDF
    GB/T 25317-2010 Dimensions of Clevis and tongue couplings of string insulator units
    绝缘子串元件的槽型连接尺寸
    China National Standards
    C

    English PDF
    GB/T 25316-2010 StatiC shore power supply (SPS) system
    静止式岸电装置
    China National Standards
    C

    English PDF
    GB/T 25315-2010 Home Control systems - Guidelines relating to safety
    家庭控制系统 安全导则
    China National Standards
    C

    English PDF
    GB/T 25314-2010 Requirements of Corrosion management program for mechanical equipment in nuclear power plants
    核电厂机械设备腐蚀管理大纲内容要求
    China National Standards
    C

    English PDF
    GB/T 25313-2010 The standardization for the evaluation of eleCtromagnetic field distribution of welding equipment
    焊接设备电磁场检测与评估准则
    China National Standards
    C

    English PDF
    GB/T 25312-2010 The standardization for the evaluation of welder exposure to eleCtromagnetic field of welding equipment
    焊接设备电磁场对操作人员影响程度的评价准则
    China National Standards
    C

    English PDF
    GB/T 25311-2010 Stationary resistanCe butt welding machines
    固定式对焊机
    China National Standards
    C

    English PDF
    GB/T 25310-2010 Stationary spot welding maChines and projection welding machines
    固定式点、凸焊机
    China National Standards
    C

    English PDF
    GB/T 25309-2010 High-voltage direCt current transfer switches
    高压直流转换开关
    China National Standards
    C

    English PDF
    GB/T 25308-2010 D.C. Filters for HVDC transmission system
    高压直流输电系统直流滤波器
    China National Standards
    C

    English PDF
    GB/T 25307-2010 High-voltage direCt current by-pass switches
    高压直流旁路开关
    China National Standards
    C

    English PDF
    GB/T 25306-2010 Standard of eleCtron accelerator facility engineering for radiation processing
    辐射加工用电子加速器工程通用规范
    China National Standards
    C

    English PDF
    GB/T 25305-2010 Seam welding maChines
    缝焊机
    China National Standards
    C

    English PDF
    GB/T 25304-2010 SpeCific requirements for non-vascular self-expanding metallic stents
    非血管自扩张金属支架专用要求
    China National Standards
    C

    English PDF
    GB/T 25303-2010 SpeCification for high efficiency permanent magnet synchronous motor for textile purpose(Frame size 90~225)
    纺织专用高效率永磁同步电动机技术条件 (机座号 90~225)
    China National Standards
    C

    English PDF
    GB/T 25302-2010 SpeCification for high efficiency three-phase induction motor for textile purpose (Frame size 90~225)
    纺织专用高效率三相异步电动机技术条件 (机座号90~225)
    China National Standards
    C

    English PDF
    GB/T 25301-2010 ResistanCe welding equipment - General specifications applicable to all transformers
    电阻焊设备 适用于所有变压器的通用技术条件
    China National Standards
    C

    English PDF
    GB/T 25300-2010 ResistanCe welding equipment - Particular specfications applicable to transformers with one secondary winding for multi-spot welding, as used in the automobile industry
    电阻焊设备 汽车工业中使用的具有一个次级线圈的多点焊变压器特殊技术条件
    China National Standards
    C

    English PDF
    GB/T 25299-2010 ResistanCe welding equipment - Particular specfications applicable to transformers with two separate secondary windings for multi-spot welding, as used in the automobile industry
    电阻焊设备 汽车工业中使用的具有两个独立次级线圈的多点焊变压器特殊技术条件
    China National Standards
    C

    English PDF
    GB/T 25298-2010 The general speCifications for resistance welding controller
    电阻焊机控制器 通用技术条件
    China National Standards
    C

    English PDF
    GB/T 25297.2-2010 ResistanCe spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes
    电阻点焊 电极接头,外锥度1:10 第2部分:末端插入式圆柱柄配合
    China National Standards
    C

    English PDF
    GB/T 25296-2010 Guidelines on general tests for safety of eleCtrical equipments
    电气设备安全通用试验导则
    China National Standards
    C

    English PDF
    GB/T 25295-2010 Guidelines on safety designs for eleCtric equipments
    电气设备安全设计导则
    China National Standards
    C

    English PDF
    GB/T 25294-2010 General teChnical requirements for cabinets of synthesized control equipments in electrical power system
    电力综合控制机柜通用技术要求
    China National Standards
    C

    English PDF
    GB/T 25293-2010 MeChanical door lock for cabinets of electrotechnical and electronic equipment
    电工电子设备机柜 机械门锁
    China National Standards
    C

    English PDF
    GB/T 25292-2010 SpeCification for direct current machine in ships
    船用直流电机技术条件
    China National Standards
    C

    English PDF
    GB/T 25291-2010 SpeCification for three-phase constant torque asynchronous motor for cargo winches in ships
    船用起货机用恒力矩三相异步电动机技术条件
    China National Standards
    C

    English PDF
    GB/T 25290-2010 SpeCification for Y3 series(IP55)three-phase induction motor (Frame size 63~355)
    Y3系列(IP55)三相异步电动机技术条件(机座号63~355)
    China National Standards
    C

    English PDF
    GB/T 25289-2010 SpeCification and technical requirements for 20kV oil-immersed distribution transformers
    20kV油浸式配电变压器技术参数和要求
    China National Standards
    C

    English PDF
    GB/T 25288-2010 188W-188Re Chromatographic generator
    188W-188Re色层发生器
    China National Standards
    C

    English PDF
    GB/T 19520.17-2010 MeChanical structures for electronic equipment - Dimension of mechanical structures of the 482.6 mm(19 in)series - Part 3-105: Dimensions and design aspects for 1U high chassis
    电子设备机械结构 482.6mm“(19in)系列机械结构尺寸 第3-105部分:1U高度机箱的尺寸和设计要求
    China National Standards
    C

    English PDF
    GB/T 16927.3-2010 High-voltage test teChniques - Part3: Definitions and requirements for on-site testing
    高电压试验技术 第3部分: 现场试验的定义及要求
    China National Standards
    C

    English PDF
    GB/T 16896.2-2010 Digital reCorders for measurements in high-voltage impulse tests - Part 2: software requirement
    高电压冲击测量仪器和软件 第2部分: 软件的要求
    China National Standards
    C

    English PDF
    GB/T 16676-2010 SpeCification of alarm and monitoring network system for bank security and protection
    银行安全防范报警监控联网系统技术要求
    China National Standards
    C

    English PDF
    GB/T 15474-2010 Classification on instrumentation and control function of instrumentation and control systems important to safety for nuclear power plants
    核电厂安全重要仪表和控制功能分类
    China National Standards
    C

    English PDF
    GB/T 14598.9-2010 Measuring relays and proteCtion equipment - Part 22-3:Electrical disturbance tests - Radiated electromagnetic field immunity
    量度继电器和保护装置 第22-3部分:电气骚扰试验 辐射电磁场抗扰度
    China National Standards
    C

    English PDF
    GB/T 14598.14-2010 Measuring relays and proteCtion equipment - Part 22-2: Electrical disturbance tests - Electrostatic discharge tests
    量度继电器和保护装置 第22-2部分:电气骚扰试验--静电放电试验
    China National Standards
    C

    English PDF
    GB/T 14597-2010 Environmental Climatic conditions appearing in different altitudes for electrical products
    电工产品不同海拔的气候环境条件
    China National Standards
    C

    English PDF
    GB/T 13627-2010 Criteria for accident monitoring instrumentation for nuclear power generating stations
    核电厂事故监测仪表准则
    China National Standards
    C

    English PDF
    GB/T 13165-2010 Methods of measurement on noise emitted by arC welding machine
    电弧焊机噪声测定方法
    China National Standards
    C

    English PDF
    GB/T 12162.4-2010 X and gamma referenCe radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields
    用于校准剂量仪和剂量率仪及确定其能量响应的X和γ参考辐射 第4部分:低能X射线参考辐射场中场所和个人剂量仪的校准
    China National Standards
    C

    English PDF
    GB/T 10249-2010 The organization for eleCtric welding machine model
    电焊机型号编制方法
    China National Standards
    C

    English PDF
    GB 811-2010 Helmets for motorCyclists
    摩托车乘员头盔
    China National Standards
    C

    English PDF
    GB 25280-2010 Road traffiC signal controller
    道路交通信号控制机
    China National Standards
    C

    English PDF
    GB 17566-2010 Muster list for seagoing transport merChant ship
    海洋运输船舶应变部署表
    China National Standards
    C

    English PDF
    GB/T 25352-2010 Test method to determine the burnthrough resistanCe of thermal/acoustic insulation materials
    隔热隔音材料耐烧穿试验方法
    China National Standards
    C

    English PDF
    GB/T 8190.9-2010 ReCiprocating internal combustion engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
    往复式内燃机 排放测量 第9部分:压燃式发动机瞬态工况排气烟度的试验台测量用试验循环和测试规程
    China National Standards
    C

    English PDF
    GB/T 8190.4-2010 ReCiprocating internal combustion engines - Exhaust emission measurement - Part 4: Steady-state test cycles for different engine applications
    往复式内燃机 排放测量 第4部分:不同用途发动机的稳态试验循环
    China National Standards
    C

    English PDF
    GB/T 8190.1-2010 ReCiprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
    往复式内燃机 排放测量 第1部分:气体和颗粒排放物的试验台测量
    China National Standards
    C

    English PDF
    GB/T 8190.10-2010 ReCiprocating internal combustion engines - Exhaust emission measurement - Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
    往复式内燃机 排放测量 第10部分:压燃式发动机瞬态工况排气烟度的现场测量用试验循环和测试规程
    China National Standards
    C

    English PDF
    GB/T 6809.8-2010 ReCiprocating internal combustion engines - Vocabulary of components and systems - Part 8: Starting systems
    往复式内燃机 零部件和系统术语 第8部分:起动系统
    China National Standards
    C

    English PDF
    GB/T 6809.5-2010 ReCiprocating internal combustion engines - Vocabulary of components and systems - Part 5: Cooling systems
    往复式内燃机 零部件和系统术语 第5部分:冷却系统
    China National Standards
    C

    English PDF
    GB/T 6118-2010 End mills - TeChnical specifications
    立铣刀技术条件
    China National Standards
    C

    English PDF
    GB/T 6117.3-2010 End mills - Part 3: Milling Cutters with 7:24 taper shanks
    立铣刀 第3部分:7:24锥柄立铣刀
    China National Standards
    C

    English PDF
    GB/T 6117.2-2010 End mills - Part 2: Milling Cutters with morse taper shanks
    立铣刀 第2部分:莫氏锥柄立铣刀
    China National Standards
    C

    English PDF
    GB/T 6117.1-2010 End mills - Part 1: Milling Cutters with parallel shanks
    立铣刀 第1部分:直柄立铣刀
    China National Standards
    C

    English PDF
    GB/T 5869-2010 LifejaCket lights
    救生衣灯
    China National Standards
    C

    English PDF

    Find out:51606Items   |  To Page of: First -Previous-Next -Last  | [308] [309] [310] [311] [312] [313] [314]

     

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2024 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.gbstandards.org

    China National Standards