Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/Z 44047-2024 |
Floating offshore wind turbines-Design requirements 漂浮式海上风力发电机组-设计要求 |
China National Standards bin |
 English PDF |
| GB/T 35717-2024 |
Measurement of flow rates of turbines, storage pumps and pump-turbines-Ultrasonic propagation time method 水轮机、蓄能泵和水泵水轮机流量的测量-超声传播时间法 |
China National Standards bin |
English PDF |
| GB/T 22581-2024 |
Basic technical conditions for mixed flow pump-turbines 混流式水泵水轮机基本技术条件 |
China National Standards bin |
English PDF |
| GB/T 44026-2024 |
Technical specifications for prefabricated cabin lithium-ion battery energy storage systems 预制舱式锂离子电池储能系统技术规范 |
China National Standards bin |
English PDF |
| GB/Z 44048-2024 |
Wind power generation system-numerical field calibration method for power performance test of wind turbines 风能发电系统-风力发电机组功率性能测试的数值场标定方法 |
China National Standards bin |
English PDF |
| GB/T 5578-2024 |
Specifications for steam turbines for stationary power generation 固定式发电用汽轮机规范 |
China National Standards bin |
English PDF |
| GB/T 44090-2024 |
Mountain climbing fitness trail configuration requirements 登山健身步道配置要求 |
China National Standards bin |
English PDF |
| GB/T 19960-2024 |
Wind power generation system - General technical conditions and test methods for wind turbines 风能发电系统-风力发电机组通用技术条件和试验方法 |
China National Standards bin |
English PDF |
| GB/T 20790-2024 |
Semi-feed combine harvesters - Technical conditions 半喂入联合收割机-技术条件 |
China National Standards bin |
English PDF |
| GB/T 25390-2024 |
Wind power generation system - Ductile iron castings for wind turbines 风能发电系统-风力发电机组球墨铸铁件 |
China National Standards bin |
English PDF |
| GB/T 33423-2024 |
Technical specifications for corrosion control of coastal and offshore wind turbines 沿海及海上风电机组腐蚀控制技术规范 |
China National Standards bin |
English PDF |
| GB/T 43904-2024 |
Wind power generation system - Wind turbine operation evaluation index system 风能发电系统-风力发电机组运行评价指标体系 |
China National Standards bin |
English PDF |
| GB/T 43945-2024 |
Ship cabin noise prediction based on statistical energy analysis 基于统计能量分析的船舶舱室噪声预报 |
China National Standards bin |
English PDF |
| GB/T 43966-2024 |
General rules for high performance liquid chromatography - quadrupole inductively coupled plasma mass spectrometry combined method 高效液相色谱-四极杆电感耦合等离子体质谱联用法通则 |
China National Standards bin |
English PDF |
| GB/T 43968-2024 |
General rules for high performance liquid chromatography - atomic fluorescence spectrometer combined analysis methods 高效液相色谱-原子荧光光谱仪联用分析方法通则 |
China National Standards bin |
English PDF |
| GB/T 754-2024 |
Parameter Series for Steam Turbines for Power Generation 发电用汽轮机参数系列 |
China National Standards bin |
English PDF |
| GB/T 25138-2024 |
Standard silica sand for calibration of casting binders 检定铸造粘结剂用标准硅砂 |
China National Standards bin |
English PDF |
| GB/T 43685-2024 |
General technical requirements for inflatable membrane structure cabins and controlled environments 充气膜结构舱室及受控环境通用技术要求 |
China National Standards bin |
English PDF |
| GB/T 43767.2-2024 |
Shipboard shore power receiving equipment - Part 2: High voltage shore power box (cabinet) 船载岸电受电设备-第2部分：高压岸电箱（柜） |
China National Standards bin |
English PDF |
| GB/T 43595-2023 |
Guidelines for start-up testing and commissioning of hydraulic turbines, water pump turbines and energy storage pumps 水轮机、水泵水轮机和蓄能泵启动试验及试运行导则 |
China National Standards bin |
English PDF |
| GB/T 28545-2023 |
Guidelines for modernization and performance improvement of turbines, storage pumps and water pump turbines 水轮机、蓄能泵和水泵水轮机更新改造和性能改善导则 |
China National Standards bin |
English PDF |
| GB/T 22437.2-2023 |
Cranes - Design principles for loads and load combinations - Part 2: Mobile cranes 起重机 载荷与载荷组合的设计原则 第2部分：流动式起重机 |
China National Standards bin |
English PDF |
| GB/T 23802-2023 |
Technical delivery conditions for corrosion-resistant alloy seamless pipes for casing, tubing, coupling blanks and accessory materials for the oil and gas industry 石油天然气工业 套管、油管、接箍毛坯及附件材料用耐蚀合金无缝管交货技术条件 |
China National Standards bin |
English PDF |
| GB/T 20656-2023 |
Oil and gas industry On-site inspection of new casing, tubing and drill pipe 石油天然气工业 新套管、油管和钻杆现场检验 |
China National Standards bin |
English PDF |
| GB/T 19830-2023 |
Oil and gas industry Steel pipes for oil and gas well casing or tubing 石油天然气工业 油气井套管或油管用钢管 |
China National Standards bin |
English PDF |
| GB/T 43318-2023 |
Gas turbine combined cycle power plant thermal performance test 燃气轮机联合循环电站 热力性能试验 |
China National Standards bin |
English PDF |
| GB/T 19520.22-2023 |
Mechanical structures of electrical and electronic equipment 482.6 mm (19 in) series mechanical structural dimensions Part 3-110: Residential racks and cabinets for smart homes 电气和电子设备机械结构 482.6 mm(19 in)系列机械结构尺寸 第3-110部分：智慧房屋用住宅机架和机柜 |
China National Standards bin |
English PDF |
| GB/T 43261-2023 |
Product acceptance plan combining zero acceptance sampling system with process control procedures 零接收数抽样系统与过程控制程序相结合的产品验收方案 |
China National Standards bin |
English PDF |
| GB/T 43136-2023 |
Superabrasive products Grinding wheels for precision scribing of semiconductor chips 超硬磨料制品 半导体芯片精密划切用砂轮 |
China National Standards bin |
English PDF |
| GB/T 19212.1-2023 |
Safety of transformers, reactors, power supply units and combinations thereof Part 1: General requirements and tests 变压器、电抗器、电源装置及其组合的安全 第1部分：通用要求和试验 |
China National Standards bin |
English PDF |
| GB/T 10357.5-2023 |
Furniture mechanical properties test Part 5: Cabinet strength and durability 家具力学性能试验 第5部分：柜类强度和耐久性 |
China National Standards bin |
English PDF |
| GB/T 10357.4-2023 |
Furniture mechanical properties test Part 4: Cabinet stability 家具力学性能试验 第4部分：柜类稳定性 |
China National Standards bin |
English PDF |
| GB/T 42858-2023 |
Corrosion-resistant alloy coiled tubing 耐蚀合金连续油管 |
China National Standards bin |
English PDF |
| GB/T 42949-2023 |
Leather color fastness test color fastness to rotating rubbing 皮革 色牢度试验 旋转摩擦色牢度 |
China National Standards bin |
English PDF |
| GB/T 42907-2023 |
Testing of non-equilibrium carrier recombination lifetime in silicon ingots, silicon blocks and silicon wafers Non-contact eddy current induction method 硅锭、硅块和硅片中非平衡载流子复合寿命的测试 非接触涡流感应法 |
China National Standards bin |
English PDF |
| GB/T 42872-2023 |
Non-destructive testing Ultrasonic testing and evaluation methods for in-service steam turbine blades 无损检测 在役汽轮机叶片超声检测和评价方法 |
China National Standards bin |
English PDF |
| GB/T 42600-2023 |
Wind power generation system - Wind turbine tower and foundation design requirements 风能发电系统 风力发电机组塔架和基础设计要求 |
China National Standards bin |
English PDF |
| GB/T 20320-2023 |
Wind power generation systems - Methods for measuring and evaluating electrical characteristics of wind turbines 风能发电系统 风力发电机组电气特性测量和评估方法 |
China National Standards bin |
English PDF |
| GB/T 8094-2023 |
Harvesting machinery—Combine harvesters—Determination of grain tank capacity and performance of grain unloading mechanism 收获机械 联合收割机 粮箱容量及卸粮机构性能的测定 |
China National Standards bin |
English PDF |
| GB/T 42735-2023 |
Stress Control Polyolefin Heat Shrink Tubing 应力控制聚烯烃热收缩管 |
China National Standards bin |
English PDF |
| GB/T 42736-2023 |
Semi-conductive polyolefin heat shrink tubing 半导电聚烯烃热收缩管 |
China National Standards bin |
English PDF |
| GB/T 42536-2023 |
Combination valve for high-pressure hydrogen storage cylinders for vehicles 车用高压储氢气瓶组合阀门 |
China National Standards bin |
English PDF |
| GB/T 42714-2023 |
General Specification for Electromagnetic Shielding Heat Shrink Tubing 电磁屏蔽热缩管通用规范 |
China National Standards bin |
English PDF |
| GB/T 13674-2023 |
Specifications for fuel use in aviation-derived gas turbines 航空派生型燃气轮机燃料使用规范 |
China National Standards bin |
English PDF |
| GB/T 42591-2023 |
Gas turbines - Specifications for quality control 燃气轮机 质量控制规范 |
China National Standards bin |
English PDF |
| GB/T 23479-2023 |
Wind turbines Double-fed asynchronous generator 风力发电机组 双馈异步发电机 |
China National Standards bin |
English PDF |
| GB/T 42808-2023 |
Technical Requirements for Electronic Data Interchange of Port-Sea-Rail Combined Transport 港口海铁联运电子数据交换技术要求 |
China National Standards bin |
English PDF |
| GB/T 21655.1-2023 |
Textiles - Evaluation of moisture absorption and quick-drying properties - Part 1: Individual combination test method 纺织品 吸湿速干性的评定 第1部分： 单项组合试验法 |
China National Standards bin |
English PDF |
| GB/T 42592-2023 |
Wind turbines - Ultrasonic testing method for wind rotor blades 风力发电机组 风轮叶片超声波检测方法 |
China National Standards bin |
English PDF |
| GB/T 15613-2023 |
Model acceptance tests of turbines, storage pumps and pump turbines 水轮机、蓄能泵和水泵水轮机模型验收试验 |
China National Standards bin |
English PDF |
| GB/T 30966.4-2023 |
Wind turbines - Communications for wind farm monitoring systems - Part 4: Mapping to communication protocols 风力发电机组 风力发电场监控系统通信 第4部分：映射到通信规约 |
China National Standards bin |
English PDF |
| GB/T 26471-2023 |
Rules for erection, dismantling and climbing of tower cranes 塔式起重机 安装、拆卸与爬升规则 |
China National Standards bin |
English PDF |
| GB/T 19215.5-2023 |
Cable duct systems for electrical installations - Part 2: Particular requirements - Section 3: Grooved cable duct systems for installation in cabinets 电气安装用电缆槽管系统 第2部分：特殊要求 第3节：安装在机柜中的带槽电缆线槽系统 |
China National Standards bin |
English PDF |
| GB/T 42399.3-2023 |
Non-destructive testing instruments - Performance and inspection of phased array ultrasonic equipment - Part 3: Combined systems 无损检测仪器 相控阵超声设备的性能与检验 第3部分：组合系统 |
China National Standards bin |
English PDF |
| GB/T 16731-2023 |
Classification of sound-absorbing performance of building sound-absorbing products 建筑吸声产品的吸声性能分级 |
China National Standards bin |
English PDF |
| GB/T 5170.18-2022 |
Test methods for environmental test equipment - Part 18: Temperature/humidity combined cycle test equipment 环境试验设备检验方法 第18部分：温度/湿度组合循环试验设备 |
China National Standards bin |
English PDF |
| GB/T 41512-2022 |
Distributed Wind Turbine 分散式风力发电机组 |
China National Standards bin |
English PDF |
| GB/T 41593-2022 |
extruded silicone tubing 挤出硅树脂管 |
China National Standards bin |
English PDF |
| GB/T 41602-2022 |
Food processing equipment Combined equipment Rotary hot air oven 饮食加工设备 组合型设备 旋转热风烤炉 |
China National Standards bin |
English PDF |
| GB/T 21391-2022 |
Measuring natural gas flow with gas turbine flowmeter 用气体涡轮流量计测量天然气流量 |
China National Standards bin |
English PDF |
| GB/T 41398-2022 |
Minimum requirements for binocular barrel of microscope 显微镜 双目镜筒最低要求 |
China National Standards bin |
English PDF |
| GB/T 24141.2-2022 |
Rubber hoses and tubing for fuel circuits for internal combustion engines—Specification—Part 2: Gasoline fuels 内燃机燃油管路用橡胶软管和纯胶管 规范 第2部分：汽油燃料 |
China National Standards bin |
English PDF |
| GB/T 42223-2022 |
Textiles - Tests for color fastness - Color fastness to rubbing Gakushin method 纺织品 色牢度试验 耐摩擦色牢度 Gakushin法 |
China National Standards bin |
English PDF |
| GB/T 16857.9-2022 |
Geometric Product Specification (GPS) Coordinate Measuring System (CMS) Acceptance and Re-inspection Testing Part 9: Coordinate Measuring Machines Equipped with Multiple Probing Systems 产品几何技术规范（GPS） 坐标测量系统（CMS）的验收检测和复检检测 第9部分：配备多种探测系统的坐标测量机 |
China National Standards bin |
English PDF |
| GB/T 20657-2022 |
Oil and gas industry - Performance formulas and calculations for casing, tubing, drill pipe, and line pipe used as casing or tubing 石油天然气工业 套管、油管、钻杆和用作套管或油管的管线管性能公式及计算 |
China National Standards bin |
English PDF |
| GB/T 9253-2022 |
Oil and Gas Industry Machining, Measurement and Inspection of Casing, Tubing and Line Pipe Threads 石油天然气工业 套管、油管和管线管螺纹的加工、测量和检验 |
China National Standards bin |
English PDF |
| GB/T 42230-2022 |
Requirements for binding and fixing steel plate coils for road transport 钢板卷道路运输捆绑固定要求 |
China National Standards bin |
English PDF |
| GB/T 12085.23-2022 |
Optics and photonics - Environmental test methods - Part 23: Combined test for low pressure and low temperature, atmospheric temperature, high temperature or damp heat 光学和光子学 环境试验方法 第23部分：低压与低温、大气温度、高温或湿热综合试验 |
China National Standards bin |
English PDF |
| GB/T 12085.22-2022 |
Optics and photonics - Environmental test methods - Part 22: Combined test of low temperature, high temperature or temperature change with impact or random vibration 光学和光子学 环境试验方法 第22部分: 低温、高温或温度变化与碰撞或随机振动综合试验 |
China National Standards bin |
English PDF |
| GB/T 18216.10-2022 |
Equipment for testing, measuring or monitoring electrical safety protection measures for low-voltage power distribution systems up to and including 1000 V AC and 1500 V DC Part 10: Combined measuring equipment for testing, measuring or monitoring protecti 交流1000V和直流1500V及以下低压配电系统电气安全 防护措施的试验、测量或监控设备 第10部分：用于防护措施的试验、测量或监控的组合测量设备 |
China National Standards bin |
English PDF |
| GB/T 4728.12-2022 |
Graphical symbols for electrical diagrams - Part 12: binary logic elements 电气简图用图形符号 第12部分：二进制逻辑元件 |
China National Standards bin |
English PDF |
| GB/T 18663.4-2022 |
Mechanical construction of electronic equipment - Tests for metric and imperial series - Part 4: Combinations of performance levels for modular cabinets 电子设备机械结构 公制系列和英制系列的试验 第4部分：模数机柜的性能等级组合 |
China National Standards bin |
English PDF |
| GB/T 41720-2022 |
Heat Shrink Chlorinated Polyolefin Tubing 热收缩氯化聚烯烃管 |
China National Standards bin |
English PDF |
| GB 41918-2022 |
biological safety cabinet 生物安全柜 |
China National Standards bin |
English PDF |
| GB/T 41886-2022 |
Cabin acoustic design requirements for transport category aircraft 运输类飞机舱内声学设计要求 |
China National Standards bin |
English PDF |
| GB/T 42047-2022 |
Determination method for outgassing products of materials and components in the sealed cabin of manned spacecraft 载人航天器密封舱内材料和部组件出气产物测定方法 |
China National Standards bin |
English PDF |
| GB/T 30966.6-2022 |
Wind turbines - Communications for wind farm monitoring systems - Part 6: Logical node classes and data classes for condition monitoring 风力发电机组 风力发电场监控系统通信 第6部分：状态监测的逻辑节点类和数据类 |
China National Standards bin |
English PDF |
| GB/T 30966.5-2022 |
Wind turbines - Communications for wind farm monitoring systems - Part 5: Conformance testing 风力发电机组 风力发电场监控系统通信 第5部分：一致性测试 |
China National Standards bin |
English PDF |
| GB/T 30966.3-2022 |
Wind turbines - Communications for wind farm monitoring systems - Part 3: Information exchange model 风力发电机组 风力发电场监控系统通信 第3部分：信息交换模型 |
China National Standards bin |
English PDF |
| GB/T 30966.2-2022 |
Wind turbines - Communications for wind park monitoring systems - Part 2: Information model 风力发电机组 风力发电场监控系统通信 第2部分：信息模型 |
China National Standards bin |
English PDF |
| GB/T 30966.1-2022 |
Wind turbines -- Communications for wind farm monitoring systems -- Part 1: Principles and models 风力发电机组 风力发电场监控系统通信 第1部分：原则与模型 |
China National Standards bin |
English PDF |
| GB/T 19072-2022 |
wind turbine tower 风力发电机组 塔架 |
China National Standards bin |
English PDF |
| GB/T 31517.1-2022 |
Design requirements for fixed offshore wind turbines 固定式海上风力发电机组 设计要求 |
China National Standards bin |
English PDF |
| GB/T 18451.1-2022 |
Wind turbine design requirements 风力发电机组 设计要求 |
China National Standards bin |
English PDF |
| GB/T 3488.4-2022 |
Cemented carbide - Metallographic determination of microstructure - Part 4: Metallographic determination of porosity, non-combined carbon defects and decarburized phases 硬质合金 显微组织的金相测定 第4部分：孔隙度、非化合碳缺陷和脱碳相的金相测定 |
China National Standards bin |
English PDF |
| GB/T 40548-2021 |
Technical specification of separate layers pressure control and combined layers drainage for coalbed methane wells 煤层气井分层控压合层排采技术规范 |
China National Standards bin |
English PDF |
| GB/T 40433-2021 |
Technical specifications of combined power source for electric vehicles 电动汽车用混合电源技术要求 |
China National Standards bin |
English PDF |
| GB/T 40370-2021 |
Calculation methods for energy consumption index of gas-steam combined cycle cogeneration 燃气-蒸汽联合循环热电联产能耗指标计算方法 |
China National Standards bin |
English PDF |
| GB/T 18451.2-2021 |
Wind turbines—Power performance measurements of electricity producing 风力发电机组 功率特性测试 |
China National Standards bin |
English PDF |
| GB/T 14172-2021 |
Bench test methods of static roll stability for motor vehicles, trailers and combination vehicles 汽车、挂车及汽车列车静侧倾稳定性台架试验方法 |
China National Standards bin |
English PDF |
| GB/T 4214.14-2021 |
Test method for noise of household and similar electrical appliances—Particular requirements for refrigerators, frozen-food storage cabinets and food freezers 家用和类似用途电器噪声测试方法 电冰箱、冷冻食品储藏箱和食品冷冻箱的特殊要求 |
China National Standards bin |
English PDF |
| GB/T 40376-2021 |
Cement based binder for interior decoration 室内装修用水泥基胶结料 |
China National Standards bin |
English PDF |
| GB/T 40543-2021 |
Petroleum and natural gas industries—Materials selection for high content CO2 for casing, tubing and downhole equipment 石油天然气工业 高含CO2环境用套管、油管及井下工具的材料选择 |
China National Standards bin |
English PDF |
| GB/T 40236-2021 |
Borosilicate glass tubing 硼硅玻璃管道 |
China National Standards bin |
English PDF |
| GB/T 14949.12-2021 |
Manganese ores - Determination of combined water content - Gravimetric method 锰矿石 化合水含量的测定 重量法 |
China National Standards bin |
English PDF |
| GB/T 6490-2021 |
Water-turbine pump 水轮泵 |
China National Standards bin |
English PDF |
| GB/T 40082-2021 |
Wind turbines—Drive train ground test specification 风力发电机组 传动链地面测试技术规范 |
China National Standards bin |
English PDF |
| GB/T 21718-2021 |
Fundamental technical requirements for small hydraulic turbines 小型水轮机基本技术条件 |
China National Standards bin |
English PDF |
| GB/T 39748.9-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 9:Gravimetric determination of density 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第9部分：称重法测定密度 |
China National Standards bin |
English PDF |
| GB/T 39748.8-2021 |
Urine-absorbing aids for incontinence—Test methods for characterizing polymer-based absorbent materials—Part 8:Gravimetric determination of flowrate 失禁用尿吸收辅助器具 聚合物基质吸液材料特性的测试方法 第8部分：称重法测定流量 |
China National Standards bin |
English PDF |
| Find out:810Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 |
+86-755-25831330
